Communication between PC/RM Backend and ERP System

Hi,
Is it possible to have communication between PC/RM Backend and ERP System by cresting RFCUSER with user type communications data instead of Dialog user.
Because of audit policy , none of DIALOG user should have SAP_ALL profile.
Is there a option to set up communications between PC/RM Backend and ERP System without a Dialog user setting.
Pravin

Hi Pravin,
You are right and the user should be always communication or system. GRC AC allows for the user to be communication or system. Can you try with PC/RM RFC user and see if it works? It should work
Alpesh

Similar Messages

Email links out of Practice Fusion are not active (as they are in IE), which they say is a problem with "something lost in the communication between the Flash engine and the browser". Does anyone have experience with this?

This is a medical records system, cloud based. I use Firefox to get into the system, but any browser would work. Other than this problem, Firefox works fine (better than IE, in my opinion).
Patient demographics include their email, which is hyperlinked and should go right to Outlook (my default email program). This works in IE, but nothing happens on the click when using Firefox as the browser.
I queried Practice Fusion, which replied: In regards to your previous question about the email hyperlink in the patient information, it looks this is not something that can be fixed on our end right now. It is the web browsers' responsibility to handle these types of links, and there seems to be something lost in the communication between the Flash engine and the browser. I apologize for any inconvenience.
Thanks for any help anyone can provide.

See if this helps you:
http://support.mozilla.com/en-US/kb/Changing+the+e-mail+program+used+by+Firefox

Message flow between advanced adapter engine and messaging system for ICO scenarios

Dear all,
I'm working on a PI 7.31 AEX box and created an ICO object for one interface with HTTP_AAE2IDoc scenario. The interface works quite well. When I looked in to message log of messages for this interface in PI monitor, I noticed that the internal XI message are put totally 5 times into the send queue and retrieved from send queue. In some steps I only see after retrieving a message from send queue and immediately put it back into send queue. Can someone please kindly explain the message flow between advanced adapter engine and messaging system and what exactly happens after each retrieving a message from send queue?
Below is an example of message log for one message:
12/08/2014 09:26:06.472    Information    MP: processing local module localejbs/CallSapAdapter
12/08/2014 09:26:06.472    Information    Application attempting to send an XI message asynchronously using connection HTTP_AAE_http://sap.com/xi/XI/System
12/08/2014 09:26:06.478    Information    Trying to put the message into the send queue
12/08/2014 09:26:06.499    Information    Message successfully put into the queue
12/08/2014 09:26:06.499    Information    The message was successfully retrieved from the send queue
12/08/2014 09:26:06.499    Information    The application sent the message asynchronously using connection HTTP_AAE_http://sap.com/xi/XI/System. Returning to application
12/08/2014 09:26:06.500    Information    HTTP adapter successfully processed interface PlantResponse_Out
12/08/2014 09:26:06.501    Information    Trying to put the message into the send queue
12/08/2014 09:26:06.501    Information    Message status set to DLNG
12/08/2014 09:26:06.513    Information    Message successfully put into the queue
12/08/2014 09:26:06.513    Information    The message was successfully retrieved from the send queue
12/08/2014 09:26:06.515    Information    Message status set to DLNG
12/08/2014 09:26:06.533    Information    Trying to put the message into the send queue
12/08/2014 09:26:06.548    Information    Message successfully put into the queue
12/08/2014 09:26:06.548    Information    The message was successfully retrieved from the send queue
12/08/2014 09:26:06.550    Information    Message status set to DLNG
12/08/2014 09:26:06.551    Information    Executing Request Mapping "http://styrolution.com/pi/Integration/PlantMaintenance/PlantResponse/PlantResponse_to_Zcol_Basf_Inotif02_Inotif01_Zeupm_Inotif01_Ludwigshafen" (SWCV 085d2320fb3b11e2cc0bf4d50aea8c33)
12/08/2014 09:26:06.563    Information    Trying to put the message into the send queue
12/08/2014 09:26:06.571    Information    Message successfully put into the queue
12/08/2014 09:26:06.571    Information    The message was successfully retrieved from the send queue
12/08/2014 09:26:06.573    Information    Trying to put the message into the send queue
12/08/2014 09:26:06.573    Information    Message status set to DLNG
12/08/2014 09:26:06.580    Information    Message successfully put into the queue
12/08/2014 09:26:06.580    Information    The message was successfully retrieved from the send queue
12/08/2014 09:26:06.582    Information    Message status set to DLNG
12/08/2014 09:26:06.583    Information    Delivering to channel: IDOC_R
12/08/2014 09:26:06.583    Information    MP: processing local module localejbs/IDocOutboundModuleBean
12/08/2014 09:26:06.583    Information    XI message received for processing
12/08/2014 09:26:06.587    Information    Sender Party: Sender Service:SXX Receiver Party: Receiver Service:RXXCLNT200 Communication Channel:IDOC_R
12/08/2014 09:26:06.588    Information    IDOC metadata repository is RXX
12/08/2014 09:26:06.589    Information    Control record is not mandatory - control record will be added if not available
12/08/2014 09:26:06.590    Information    XML Payload parsed to idoc document list with number of idocs: 1
12/08/2014 09:26:06.595    Information    Sending idoc message to receiver R/3 system with TID XIh{lsRI824UITC0009OalmW
12/08/2014 09:26:06.813    Information    IDOC message sent to receiver R/3 system
12/08/2014 09:26:06.817    Information    TID XIh{lsRI824UITC0009OalmW confirmed
12/08/2014 09:26:06.819    Information    Message was successfully transmitted to endpoint <local> using connection HTTP_AAE_http://sap.com/xi/XI/System
12/08/2014 09:26:06.821    Information    Message status set to DLVD
Thanks & regards
Dingjun

Hello All,
Thanks for the prompt responses and with best information, But apart from this,I need how an adapter(File/JDBC) works along
with AAE in PI 7.1. When does the job of File/JDBC adapter is completed and resumed in a synchronous case. That is,
File Location --> file adapter -
> XI(AAE) --> JDBC adapter --> database.
In file sender, lets suppose we have synchronous settings(Best Effort). Now when File adapter's job is finished and when it
gets back the response back from XI. Please explain step by step from starting(file adapter polling the location) to getting the response coming back to XI.
Regards,
Achari.

How do I set my firewall settings in Avasti to allow communications between my HP 8600 and my comput

How do I set my firewall settings in Avasti to allow communications between my HP 8600 and my computer

Something to Consider:
If you are talking about "Avast!" Security Software, either the free or the paid version, the following may apply to you:
There are three main levels of Security in the Avast! software: Home, Work, and Public
Home is the setting many people use when "at home", that is, connected to the home network. The home network is sometimes defined as the "192.168" network: these are the computers and printers that you have and use in your home environment. The network is (most usually) private and (should be) secured with with a passphrase at your router. The Avast! Software sees the "Home" network as a "safe" environment: devices connected within the "Home" network are allowed to "talk" (communicate) with one another without undue restrictions.
Work is the next setting. The software places some restrictions on this level of communication. Home users can certainly use this setting -- in many (most) cases, the "Work" setting is a solution that provides for communication and a bit more security for the home network and its devices.
Public is the strictest setting and is meant to keep your computer safe in a public place: the library, coffee shop, on a street corner. Outside "prying eyes" are prevented from peeping and outside communications are restricted.
If you have set (or left) your Avast! software set to Public, or even Work (and you do not know how to handle the restrictions), then you may have simply locked out the communication between the printer and the computer(s) on your home network.
Open your Avast! Software and set the security level to either "Home" or "Work".
You can find out more about how to use the software settings at the Avast! website.
Advanced Users Only - You will know if you changed the Rules... this is not something one does by accident.
If you have changed the rules within the settings, you may have locked yourself out. Make sure you have both "in" and "out" traffic settings adjusted correctly for each rule you change / adapt / add.
Kind Regards,
Dragon-Fur

Encrypt communication between SharePoint Web App and SSRS

Hi
I have SharePoint 2010 in multi server farm. The SharePoint web app has SSL enabled. The Reporting Server (SSRS) is http URL.
So when the Report Viewer web part is used, the communication between SharePoint web server and SharePoint Reporting Server is unsecured. The existing SSL has hard coded hostnames and for business reasons we prefer not to modify it.
Does anyone know how can I make that communication secured? Do I need to apply new SSL for SP Reporting Services? Is there any other option?

This should get you off and running on SSL
http://technet.microsoft.com/en-us/library/ms345223(SQL.100).aspx
and if you haven't go SQL on SSL - ->
http://technet.microsoft.com/en-us/library/ms189067(v=sql.100).aspx
Stacy Anothersharepointblog.blogspot.com

Is there any dependency between third-party adapter and XI system service?

Hi Friends,
I'm developing a thrid-party JCA adapter(deployed under sap.com) on SAP XI? In the adapter, it will use "ModuleProcessor" EJB system service.
I found sometimes if the JCA adapter cannot be started correctly, the other system service also not started. And checking the log, I found the reason the JCA adapter not started, is because the "ModuleProcessor" EJB system service is not started.
so just want to know is there any dependency between third-party adapter and XI system service?
Thanks & Regards,
Jason

Hi soo.richard,
You say it could be intruders cutting in - same problem/solution as for any network I think. Access can be password protected or access limited via MAC address filtering. I'm not sure how Apple Tv works with a hidden SSID but that would be another option.
Airplay itself can be password protected through the airplay settings.
I'm not sure if Apple TV works with other authentication such as a password but maybe the manual will assist with this?
Hope this helps.

HT204387 which profile allows communication between iOS 4/later and Bluetooth Health Monitor(such as Fetal Heart Rate/Motion/respiration etc. )

which profile allows communication between iOS 4/later and Bluetooth Health Monitor(such as Fetal Heart Rate/Motion/respiration etc. )

Thank you!
We are developing a monitor with Bluetooth 4.0 moudle, also programing an iOS App for this wireless monitor. We want to transfer the monitor data to iphone/ipad(which installed the App) through bluetooth.
As you know, many bluetooth device are not allowed to connect to iphone/ipad through bluetooth. So I'd like to know that which of the iOS supported bluetooth profies should I use when programing, to ensure the monitor can connect to the Apple device and upload data. Of course, if they can connect successfully, both of the monitor and Apple device would be acknowledged "connected".

Error while configuring SSO between Portal 7.0 and Operating System.

Dear all,
I am having an issue,i need to configure SSO between the Portal 7.0 and operating System.I have followed both the Kerberos as well as spNego wizard methods,but i am not able to configure UME settings as we are using datasourceConfiguration_abap.xml. I tried to edit the datasource confuiguration file but after editing the server is not starting.
Please let me know the steps i have to do to edit the datasourceConfiguration_abap.xml
We are not able to Map the Service USer to the UME CONFIGURATION XML File.
Thanks
Ravi.S

Ravi,
If you have successfully configured the SSO, please pass on the document if any you have.
Regards,
Mohammad.

Secure Communication between SAP R/3 and SAP portal(WAS Java)

Hi All,
We have a requirement where client says ,there needs to be a SSL tunnel established between SAP R/3 and Portal(through ITS) to access R/3 through portal
Do we have to use SSL for that or SNC?I heard SNC is a mechanism which have to be used here since it uses DIAG protocol to connect but not Http.Is it true?Kindly give some more ideas on this.
Other thing is to do this they need to open a port between for using Firewall.Can you guide which SAP port has to be open for this connection?
Thanks In Advance
Regards
Rani A

Hi Rani,
what the ITS Admin is, is explained in the docs to the <a href="http://help.sap.com/saphelp_nw04/helpdata/en/44/28611e0bd26493e10000000a1553f7/frameset.htm">ITS Admin Tool</a>. This also includes how to access it.
Usually specifiying the ABAP backend is done by maintaining the <a href="http://help.sap.com/saphelp_nw04/helpdata/en/44/2b67fe369b060ae10000000a155369/frameset.htm">Global Service File Parameters</a>.
The <a href="http://help.sap.com/saphelp_nw04/helpdata/en/44/2aa8081a3a060ae10000000a155369/frameset.htm">SNC configuration</a> is part of the <a href="http://help.sap.com/saphelp_nw04/helpdata/en/44/2a95a61a3a060ae10000000a155369/frameset.htm">Security Configuration</a> and also done in the ADM instance of the ITS.
Regards,
Patrick

Difference between client Export/Import and a system refresh

Hi Experts,
I would like to know the diffrence between client Export/Import and System refresh.
Actually i have done client export from our production system and imported it into our quality system, I have asked our functional consultants whether the production data is now available in Quality. They replied me saying whole data of production system is available in Quality system as off date i have copied the export.
The size of the export was around 8GB, How can this have all the data of Production system which is around 600 GB.
In this way what is the use of System refresh which is done by database level ( changing the cntrl file etc... ), As i am getting all the data by doing Client Export/Import.
Thanks & Regards,
Injamuri

Hi,
What is system refresh when and why it is done?
The system refersh is nothing but the deletion of the client and replacing the data from other client. For example : you have clients 100, 200 and 300. Suppose when you want to refresh the client 100 you remove the client 100 and replace it with 200 0r 300 as per your reqiurement.
Mostly the refresh of clients will be happen at the time of development stage.
System Refresh is a simplified term to Client Copy. Client Copy means copying the production client on to the quality to test the real data. As recommend by SAP this need to carried out every 3 months.
The process to carry out the same is as follows:
1. Create a client on quality system using txn scc4
2. Create a RFC between Production system and Quality System (need to create on quality system)
3. Login to the newly created client using sap* and pass as a password
4. Txn sccl to start the client copy.
You can test the client copy by selecting the test run option. (test run will estimate the time taken for the activity).
Anil

Communication between two jvm (client and server)

Hi ,
   I want to access the UME service of the SAP J2EE Container using a stanalone client application.
So the client would be running on remote JVM.
Here we use the JNDI service to communicate between the client and server.
p.put(Context.INITIAL_CONTEXT_FACTORY,"com.sap.engine.services.jndi.InitialContextFactoryImpl");
                    p.put(Context.PROVIDER_URL, providerURL.trim());
                    p.put(Context.SECURITY_PRINCIPAL, securityPrinciple.trim());
                    p.put(Context.SECURITY_CREDENTIALS, securityCredentials.trim());
                    Context ctx = (Context) new InitialContext(p);
                    Object objRef = ctx.lookup(ejbName.trim());
I want to know that is the communication between the client and server secured in this scenario
Best Regards
Manoj

Okay, the client and server VMs are different implementations of the Hotspot engine. Hotspot basically takes the Java bytecode from your .class files and turns it into native machine instructions at runtime. (The optimizations are actually much more complex than that, but that's the basic concept.)
The client VM is so named because it's designed to be used for GUI-type applications interacting with the user. It is designed to have a quicker startup and smaller memory footprint.
The server VM uses more memory and is typically slower at starting up than the client VM, but can often perform ridiculously fast. This of course depends completely on the particular code being run, and you should probably profile and see which VM works better for your application.
Some interesting optimizations are performed by the 1.4.1 server VM, such as: removal of array-bounds checks (when it determines that the index can't become out of bounds), inlining of methods, and more.
Here is a link to more info if you're interested:
http://java.sun.com/products/hotspot/docs/whitepaper/Java_HotSpot_WP_Final_4_30_01.html

Integration between CRM 5.0 and ERP 5.0

Hi all,
i need to retreive data from a HR module of an ERP 5.0 and import them into a CRM 5.0
How can i connect the 2 systems?
And how can i make the import?
Do you know the steps that i have to follow? there is a guide concerning this topic?
thank you
Dan

Usually in this case you use IDOCs to get the integration done between ERP and CRM. However, you need identify what are the business process, and which IDOC's need to be used for the same.
Here are couple of documents which will tell you what configuration needs to be done.
http://www.sappro.com/downloads/OneClientDistribution.pdf
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
Regards,
Ravi
Note : Please mark all the helpful answers

EDMS and ERP systems

hi friends,
one of our customer is looking for document management system, and interesting with SAP solutions for document management.
but they use nonSAP system, and wonder if any SAP solutions like BI-BW tools exist for document management which is suitable.
when I m searching for this I saw eDMs but, actually, I have no idea about SAP DMS or eDMS.
can anyone give me brief explanations about this and the possibility of integration of eDMs with nonSAP system.
or advice me any satisfactory SAP solution.
thanx in advance.

Hi,
SAP DMS is a component of SAP ECC and therefore could be implemented as the initial deployment of a SAP ECC project, however, in practice this not typically the case. Most customers either implement SAP DMS in parallel to other ECC components or add SAP DMS to an existing implementation later.
Vendors conduct workshop for SAP customers to investigate their requirements for document and content management, and recommend potential scenarios for a SAP DMS deployment. Post that,you can define a SAP DMS implementation plan to fit within your current SAP roadmap.
For info on easy DMS(web-based access to SAP DMS) specifically,do browse through the below link:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/a0805600-a4f9-2b10-f0ad-ada7634f4199
For differences between Easy DMS and DMS, please visit the below link,
wht is easy dms and sap dms
Hope this answers your question.
Regards,
Pradeepkumar H.
Edited by: Pradeepkumar Haragoldavar on Apr 21, 2010 12:04 PM
Edited by: Pradeepkumar Haragoldavar on Apr 21, 2010 12:17 PM

Applet to Applet communication between two seperate threads and jsp pages

Hi,
have two java applets running on two separate jsp pages. I am trying to have one applet talk to the other applet. I have tried putting the applets in a static hashtable, but I found out (through trial and error) that the memory is not shared between the applets. Needless to say the appletcontext object will not work as well. I have also tried to put the applet threads into a thread group, but it seems that the second applet can't find the first applet's threads. Is there a funky way that I need to create the threads for the threadgroup? Is there a way or type of object that I can use that will share the static memory between plugins? I am using 1.6 in IE. Or am I looking at this wrong and there is an easy way to do this and I am not seeing it.
Thanks,
Marc

Hi Mylene,
I hope I have understood your problem correctly. I can try to give you a tip. The times I've had to do a pop-up, for instance to show details or a part of the data in a table, I call a javascript function with the required parameters (an ID for details or an array of rows) when the button is pressed or a link is clicked. The function then builds a URL with all the paremeters and uses it to call the standard window.open function. After that the request is handled "as usual", ie as if you didn't actually do a pop-up but simply displayed a new page. The content of the pop-up is a jsp with all the required code to build the table and/or display the data. The contents of the table or data are retrieved with the help of the parameters sent.
I'm not sure if the portal kit provides some kind of standard functionality for this, but in the cases I've worked with J2EE solutions this has been the most common way of solving the problem.
I hope this helps.
kind regards,
Dionisios

Communicating between Weblogic 8.1 and Weblogic 10.3

Hi,
I have a requirement where in I need to access Queues in Weblogic 10.3 from Weblogic 8.1 and viceversa.
Weblogic 8.1 :
This has a proxy/web application that needs to put request to a Queue exposed in weblogic 10.3
And will again poll for a Response Queue in weblogic 10.3
Is it feasible, knowing the fact that jdk version in 8.1 is 1.4 & Jdk version is 1.6 in 8.1 ?
Can we lookup for Queue defined in 8.1 in Weblogic 10.3 ? Can we use JMS adapter in 10.3 for acheiving this.
Any help is greatly appreciated.
Thanks !!

Avoid using Message Bridges to receive messages.
See the best practice: http://download.oracle.com/docs/cd/E15051_01/wls/docs103/jms/interop.html#wp1009272
Q. When should I avoid using a messaging bridge?
A. Other methods are preferred in the following situations:
    * Receiving from a remote destination—use a message driven EJB or implement a client consumer directly.
    * Sending messages to a local destination—send directly to the local destination.
    * Environment with low tolerance for message latency. Messaging Bridges increase latency and may lower throughput. Messaging bridges increase latency for messages as they introduce an extra destination in the message path and may lower throughput because they forward messages using a single thread.
    * Forward messages between WebLogic 9.0 domains—Use WebLogic Store-and-Forward.

Communication between PC/RM Backend and ERP System

Similar Messages

Maybe you are looking for