Communication between SAP e-recruitment and 3rd party website

Hi,
We are implementing e-recruitment module and would like to know how to transport a recruitment advertisement created in SAP e-Recruitment to a job website. Should we use IDOC and XI? Or is there some other way of doing it? How does SAP e-Recruitment communicate with the 3rd party website? The advertisement should be transported in a way that it can be directly displayed on the job website, with all the formatting intact.
Please let me know in detail how the functionality can be achieved.
Regards,
DK

Hi,
Did you have any reply on this?
regards
Justin

Similar Messages

Secure Communication between SAP R/3 and SAP portal(WAS Java)

Hi All,
We have a requirement where client says ,there needs to be a SSL tunnel established between SAP R/3 and Portal(through ITS) to access R/3 through portal
Do we have to use SSL for that or SNC?I heard SNC is a mechanism which have to be used here since it uses DIAG protocol to connect but not Http.Is it true?Kindly give some more ideas on this.
Other thing is to do this they need to open a port between for using Firewall.Can you guide which SAP port has to be open for this connection?
Thanks In Advance
Regards
Rani A

Hi Rani,
what the ITS Admin is, is explained in the docs to the <a href="http://help.sap.com/saphelp_nw04/helpdata/en/44/28611e0bd26493e10000000a1553f7/frameset.htm">ITS Admin Tool</a>. This also includes how to access it.
Usually specifiying the ABAP backend is done by maintaining the <a href="http://help.sap.com/saphelp_nw04/helpdata/en/44/2b67fe369b060ae10000000a155369/frameset.htm">Global Service File Parameters</a>.
The <a href="http://help.sap.com/saphelp_nw04/helpdata/en/44/2aa8081a3a060ae10000000a155369/frameset.htm">SNC configuration</a> is part of the <a href="http://help.sap.com/saphelp_nw04/helpdata/en/44/2a95a61a3a060ae10000000a155369/frameset.htm">Security Configuration</a> and also done in the ADM instance of the ITS.
Regards,
Patrick

MIRO reversal split the value between GR/IR clearing and 3rd party material account

Dear Team,
We are facing the issue in MR8M for PO 4500002602; the PO has been created on 11/30/2012 in the previous fiscal year and performed the GR and IV in the 2013 fiscal year.
For one GR the accounting flow is as follows:
For the 3 GR's 5000013746, 5000013747 and 5000013748 one IV has been done 5105612646, at the time of IV the account entry is as follows
GR accounting entry:
Account
Cost center
Description
Amount
610020
3500
3rd Party Mat (SP)
1,450.41
211200
Gds Rcvd / Inv Rcvd
1,450.41-
610020
3500
3rd Party Mat (SP)
1,506.62
211200
Gds Rcvd / Inv Rcvd
1,506.62-
610020
3500
3rd Party Mat (SP)
400.35
211200
Gds Rcvd / Inv Rcvd
400.35-
IV entry:
Account
Cost center
Description
Amount
100762
AIR PRODUCTS & CHEMICALS
-4,135.98
211200
3500
Gds Rcvd / Inv Rcvd
3,357.38
651200
3500
NITROGEN SUPPLIES
778.6
750090
1100
Sales Tax
55.01
216200
Use Tax AP - State
-55.01
But for the same IV when user reversed with MR8M system split the GR/IR cost as follows:
Account
Cost center
Description
Amount
100762
AIR PRODUCTS & CHEMICALS
4,135.98
211200
3500
Gds Rcvd / Inv Rcvd
3,245.65-
610020
3500
3rd Party Mat (SP)
111.73-
651200
3500
NITROGEN SUPPLIES
778.60-
750090
1100
Sales Tax
55.01-
216200
Use Tax AP - State
55.01
One line item at the time of MIRO i.e. 3357.38 is split into two line items i.e. 3245.65 and 111.73 in reversal.
But in quality system when we create new PO, GR and IV system is working fine why in case of previous year PO system is behaving like this.
Kindly advice.
Regards,
Ravi

Dear Team,
Any update on the above issue, please let me know any of you faced this type of issue so far and please through some light on the issue.
Regards,
Ravi.

Communication between SAP and 3rd Party Systems using IDOC HTTP XML Interfa

Hi
i am try do
Communication between SAP and 3rd Party Systems using IDOC HTTP XML Interface
With The help of SDN Contribution
link----
( have look on it)
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4943f2b7-0a01-0010-37af-faff35b2f08c
I am getting error in
Partner system as HTTPLOG and "Execute" to check the results
Error is -- Port could not be created
RFC destination HTTPLOG Not specified for system HTTPLOG
any 1 have any idea if plzzzzzzzz...........
Thank u
Ram

Hello .
we are also in process of implementing the same
could you share the knowledge pl?
1)is it a separate add on with ALE to saphr
or using ECC ??
2)can u share the configuration part ??
we are trying it on webas as addon 3.0 .

Connectivity between SAP ECC system and SAP BI

Connectivity between SAP ECC system and SAP BI
Hi BI-experts!
I would like to load e.g. transaction data from SAP ECC system into SAP BI system.
The Loading process is hanging in processing step u201CSERVICE APIu201D.
The process in hanging in status "yellow" and then changed after a while to status u201Credu201D.
[0FI_AR_4 |http://www.file-upload.net/view-1447743/0FI_AR_4.jpg.html ]
The following steps within Load process are yellow and then red:
Extraction (messages): Missing messages
Missing message: Request received
Missing message: Number of sent records
Missing message: Selection completed
Transfer (IDocs and TRFC): Missing messages or warnings
Request IDoc : Application document posted (is green)
Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
Info IDoc 1 : sent, not arrived ; Data passed to port OK
Info IDoc 2 : sent, not arrived ; Data passed to port OK
Info IDoc 3 : sent, not arrived ; Data passed to port OK
Info IDoc 4 : sent, not arrived ; Data passed to port OK
Subseq. processing (messages) : Missing messages
Missing message: Subseq. processing completed
DataStore Activation (Change Log) : not yet activated
Question:
Can some one tell me whether my distribution model or other settings are wrong?
I created 2 distribution model (BD64), one from SAP BW system and other from SAP BI system with message types RSRQST, RSINFO, RSSEND
Thank you very much!

Hi Holger.
this issue is related to the RFC but not the one which is communicating from BI to R/3 rather the one which is communicating from R/3 to BI follow these steps.
1. check your BI system logical name from the myself source system.
2. go the ECC and run the transaction sm59
3. go the ABAP Connection folder and search for your RFC which name would be by default as per your BI logical system name.
4. double click it and edit it now check whether the Target hostname or ip is OK.
5. In the logon tab check the client number User and password settings.
Save it and test it with both Connection Test and Remote Logon.
if every thing work fine i hope your problem will be solved.
kind regards,
Zeeshan

Communication between PC/RM Backend and ERP System

Hi,
Is it possible to have communication between PC/RM Backend and ERP System by cresting RFCUSER with user type communications data instead of Dialog user.
Because of audit policy , none of DIALOG user should have SAP_ALL profile.
Is there a option to set up communications between PC/RM Backend and ERP System without a Dialog user setting.
Pravin

Hi Pravin,
You are right and the user should be always communication or system. GRC AC allows for the user to be communication or system. Can you try with PC/RM RFC user and see if it works? It should work
Alpesh

How do I set my firewall settings in Avasti to allow communications between my HP 8600 and my comput

How do I set my firewall settings in Avasti to allow communications between my HP 8600 and my computer

Something to Consider:
If you are talking about "Avast!" Security Software, either the free or the paid version, the following may apply to you:
There are three main levels of Security in the Avast! software: Home, Work, and Public
Home is the setting many people use when "at home", that is, connected to the home network. The home network is sometimes defined as the "192.168" network: these are the computers and printers that you have and use in your home environment. The network is (most usually) private and (should be) secured with with a passphrase at your router. The Avast! Software sees the "Home" network as a "safe" environment: devices connected within the "Home" network are allowed to "talk" (communicate) with one another without undue restrictions.
Work is the next setting. The software places some restrictions on this level of communication. Home users can certainly use this setting -- in many (most) cases, the "Work" setting is a solution that provides for communication and a bit more security for the home network and its devices.
Public is the strictest setting and is meant to keep your computer safe in a public place: the library, coffee shop, on a street corner. Outside "prying eyes" are prevented from peeping and outside communications are restricted.
If you have set (or left) your Avast! software set to Public, or even Work (and you do not know how to handle the restrictions), then you may have simply locked out the communication between the printer and the computer(s) on your home network.
Open your Avast! Software and set the security level to either "Home" or "Work".
You can find out more about how to use the software settings at the Avast! website.
Advanced Users Only - You will know if you changed the Rules... this is not something one does by accident.
If you have changed the rules within the settings, you may have locked yourself out. Make sure you have both "in" and "out" traffic settings adjusted correctly for each rule you change / adapt / add.
Kind Regards,
Dragon-Fur

Connection between SAP R/3 and SAP XI with RFC

Hi Experts,
I am beginner in SAP XI.
We are using SAP XI 3.0 SP 9 and SAP R/3 4.6 C
I am trying to validate a connection between SAP R/3 and SAP XI with RFC.
I followed all the weblogs ,and i did exactly the same way, but I am unsucessful...
Schema not available Exception
com.sap.aii.af.service.cpa.CPAException: Schema not available for RFC|3b787a8035c111d6bbe0efe50a1145a5|http://sap.com/xi/XI/System.
at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryDataSAXHandler.endElement(DirectoryDataSAXHandler.java:262)
at com.sap.engine.lib.xml.parser.handlers.SAXDocHandler.endElement(SAXDocHandler.java:154)
at com.sap.engine.lib.xml.parser.XMLParser.scanEndTag(XMLParser.java:1826)
at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1722)
at com.sap.engine.lib.xml.parser.XMLParser.scanContent(XMLParser.java:2298)
at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1719)
at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2701)
at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:162)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:126)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:136)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:209)
at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:270)
at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:331)
at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:125)
at javax.xml.parsers.SAXParser.parse(SAXParser.java:345)
at javax.xml.parsers.SAXParser.parse(SAXParser.java:143)
at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryDataParser.updateCentralCache(DirectoryDataParser.java:54)
at com.sap.aii.af.service.cpa.impl.cache.CacheManager.updateCacheWithDirectoryData(CacheManager.java:713)
at com.sap.aii.af.service.cpa.impl.cache.CacheManager.performCacheUpdate(CacheManager.java:595)
at com.sap.aii.af.service.cpa.impl.cache.CacheManager$CacheUpdateRunnable.run(CacheManager.java:440)
at com.sap.engine.frame.core.thread.Task.run(Task.java:60)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:73)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:145)
Please help me out on this
Thanks in advance
Raju

hi,
try refreshing you CAP cache:
741214 (check this note)
and check if the refresh was successful
(CPA history)
Regards,
michal

Email links out of Practice Fusion are not active (as they are in IE), which they say is a problem with "something lost in the communication between the Flash engine and the browser". Does anyone have experience with this?

This is a medical records system, cloud based. I use Firefox to get into the system, but any browser would work. Other than this problem, Firefox works fine (better than IE, in my opinion).
Patient demographics include their email, which is hyperlinked and should go right to Outlook (my default email program). This works in IE, but nothing happens on the click when using Firefox as the browser.
I queried Practice Fusion, which replied: In regards to your previous question about the email hyperlink in the patient information, it looks this is not something that can be fixed on our end right now. It is the web browsers' responsibility to handle these types of links, and there seems to be something lost in the communication between the Flash engine and the browser. I apologize for any inconvenience.
Thanks for any help anyone can provide.

See if this helps you:
http://support.mozilla.com/en-US/kb/Changing+the+e-mail+program+used+by+Firefox

Encrypt communication between SharePoint Web App and SSRS

Hi
I have SharePoint 2010 in multi server farm. The SharePoint web app has SSL enabled. The Reporting Server (SSRS) is http URL.
So when the Report Viewer web part is used, the communication between SharePoint web server and SharePoint Reporting Server is unsecured. The existing SSL has hard coded hostnames and for business reasons we prefer not to modify it.
Does anyone know how can I make that communication secured? Do I need to apply new SSL for SP Reporting Services? Is there any other option?

This should get you off and running on SSL
http://technet.microsoft.com/en-us/library/ms345223(SQL.100).aspx
and if you haven't go SQL on SSL - ->
http://technet.microsoft.com/en-us/library/ms189067(v=sql.100).aspx
Stacy Anothersharepointblog.blogspot.com

Difference between SAP Business Workflow and CRM Workflow

Hello guys,
Is there any difference between SAP Business Workflow and CRM Workflow?
Are there others workflows types in SAP?
In all SAP Workflow Courses (BIT600, BIT601, BIT603, BIT610) only was talked about SAP Business Workflow, and nothing about CRM Workflow.
Thanks a lot!
Kleber

Hello Kleber,
There is not much of the differance between CRM workflows and SAP Business workflows..
Workflows are esentially part of Basis (BC) components and hence its the same across all SAP products as all these products have components of Basis(BC) in them...
To Conclude, SAP Busines workflows and CRM workflows are the same things... However when you work on CRM, the BOR objects would be belonging to CRM and not to ECC... However conceptwise , there in no change at all.. If you learn BIT100......, you can also work on CRM workflows..
Regards,
Anand

Lost all my actions and 3rd party filters after upgrading to Photoshop CC 2014

How do I get all of my actions and 3rd party filters from Photoshop CC to Photoshop CC 2014?

If you migrate your CC presets you should get your Actions, Pattens, Sahapes, Shapes etc back. Menu Edit>Presets>Migrare Presets. You need to copy or to install you 3rd Party plug-ins into CC 2014.

Purchase price difference between SAP R/3 and BWI report

Hi
Purchase price difference between SAP R/3 and BWI report
What is purchase price variance ?, my user is telling that in SAP R/3, purchase price variance 100 and in BWI report it is 200 .
Any other terminologies are there for purchase price variance ?
And any idea wherefrom BWI will take this purchase price variance ?
Thanks In advance

Purchase price variance is he difference in price between the amount paid to the supplier and the planned or standard cost of that item
Request you to check your data first in your Cube/ODS, better would be to check in the data container where the data is first loaded.
Also check if this field is getting directly loaded as 1-to-1 mapping.

IDoc structure mismatch between SAP R/3 and PI

Hi,
There is an interface in PI which receives IDoc from SAP R/3 system. I have been facing an issue of IDoc structure mismatch (in terms of data present in it) between SAP R/3 and when PI receives the IDoc.
To be more precise,
In SAP R/3 system, the value ABC is present in the field DOCNUM in the IDoc.
But when the PI receives the same IDoc from SAP R/3 (as seen in Integration Engine), the value ABC is present in a different field and the DOCNUM field is empty.
<DOCNUM></DOCNUM>
<ARCKEY>ABC</ARCKEY>
The first step towards resolution was to delete and reimport the IDoc metadata from SAP R/3 in PI system using IDX2, which did not help in this case.
Could anyone please help in resolving the field mismatch between the IDoc triggered from SAP R/3 and the IDoc received by PI.
Regards,
Prajeet

Hi Prajeet,
it's long ago but your question has not been finally solved, so let me try to give you an answer. We are facing the same problem after patching our PI.
I think the reason for the different behaviour is related to SAP note 1233908, where SAP has changed the IDoc adapter.
https://service.sap.com/sap/support/notes/1233908
Regards,
Lars

How to Reconcile Data Between SAP Source Systems and SAP NetWeaver BI

Hi,
I just read "How to Reconcile Data Between SAP Source Systems and SAP NetWeaver BI". While I'm waiting for more authorisation to r/3 to carry it out and test this functionality.
I'd like to ask a question to anyone who has implemented this type solution. On page 10 it talks about creating a view then setting up the datasource. The solution talks about runnig a query. I suspect when we run a query I would run it for only a period(using variable) to reconcile.
My question is this. Will the datasource extractor on /r3 only select the period in our variable or will it do a full selection of the data which would then be passed to BW for filtering?
Regards

DEar Mark,
There are several avenues where you can see and reconcile your data with source system, u can see data in by tcode RSA3 for a datasource, and compare the values with actual document posted into the R/3 system. Respective fuctional consultant canhelp you a lot to confirm the data.
On BW side u can see the data in PSA and then check tranformations which subsequent change/update/reject data records based on the selective conditions.
hope this helps.
Kindly assign the points if it works.
Revert back if u need futher help/information.

Communication between SAP e-recruitment and 3rd party website

Similar Messages

Maybe you are looking for