Communication between the computer and the disc drive failed

The disc can’t be burned because because communication between the computer and the disc drive failed (error code 0x80020022). This computer has been out of the box for less than a month and this has been a growing problem.

My problem was FIXED at the apple store..... there was something wrong in the system preferences and the genius deleted something that recreated it's self. Surely enough we we're able to burn a 600 mb dmg of nothing onto a few test disks. For anyone having this issue...it's NOT The media, it's some configuration issue within the computer's preferences. I'm telling you all to take your machine to the nearest apple store and have them fix it, if your machine is still under warranty the fix is free. There was no hardware issue, so the optical drive was not replaced.

Similar Messages

How do i fix the inability to establish two-way communication between my computer and the printer?

HP Photosmart 5510 e-All in One Printer B111a
Windows XP
Message "The computer is unable to establish two-way communication with the device."
Installed new printer
I'm simply trying to get the estimated ink levels.

Please make a Genius Appointment and take it in for service.

I have burned CDs before from 2gb to 7gb using different types of discs. Now I get this error message Apple error The disc can't be burned because communication between the computer and the disc drive failed (error code 0x80020022). What should I do

I have burned CDs before from 2gb to 7gb using different types of discs. Now I get this error message Apple error The disc can't be burned because communication between the computer and the disc drive failed (error code 0x80020022). What should I do

Reset the SMC, as per > Resetting the System Management Controller (SMC)
1. Shut down the computer.
2. Unplug the computer's power cord.
3. Wait fifteen seconds.
4. Attach the computer's power cord.
5. Wait five seconds, then press the power button to turn on the computer.
Then zap the PRAM/NVRAM as per > About NVRAM and PRAM
1. Shut down the computer.
2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3. Turn on the computer.
4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
6. Release the keys.
Then retry the Disc Drive.

I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV?

I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV? I have a MiniDisplay Port to VGA adapter, but there are two issues with it: The new display doesn't have a VGA port, and even if it did, I wouldn't want to have my mac constantly attached to the display by a cable. I was looking for a way to use the TV as a display without any wires. Is there some type of bluetooth setup I could use? Please let me know if you have any suggestions.

As I wrote above, I think you should look into the Apple TV yourself. The best place to find information about what it can and can't do and to ask your own specific questions is probably in the Apple TV forum, here:
https://discussions.apple.com/community/appletv/appletv

The installed version of SQL Server could not be verified or is not supported. Verify that the computer and the installed version of SQL Server meet the minimum requirements for installation

Hi Guys,
Currently i am trying to install SCOM2012R2 with SQL 2012 SP1. When i proceed with SCOM installation, getting an error
"The installed version of SQL Server could not be verified or is not supported. Verify that the computer and the installed version of SQL Server meet the minimum requirements for installation, and that the firewall settings are correct. See the Supported
Configurations document for further information.
SQL Collation i selected as per System Center2012 guide SQL_Latin1_General_CP1_CI_AS
Can some one please help me on this?
Regards
Kris
Kris

Hi,
Please check logs for further information. Let us know what the logs says:
http://www.systemcentercentral.com/opsmgr-2012-my-installation-failed-what-log-files-do-i-read-and-where-can-i-find-them/
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

After a power outage Apple TV can't find date and time - just keeps spinning on that screen. Tried powering off Apple TV, the computer, and the router. Tried to restart Apple TV. Tried to restore Apple TV, but it got stuck again setting time/date.

After a power outage Apple TV can't find date and time - just keeps spinning on that screen. Tried powering off Apple TV, the computer, and the router. Tried to restart Apple TV. Tried to restore Apple TV, but it got stuck again setting time/date.

Welcome to the Apple Community.
Along with the things you have tried, some have had success setting the location to the US.

My iphone is able to charge when i connect it to my computor, but no matter what i do, will not show up on itunes. i have tried resetting both the computer and the iphone and nothing is working.

my iphone is able to charge when i connect it to my computor, but no matter what i do, will not show up on itunes. i have tried resetting both the computer and the iphone and nothing is working.

Type "ipad not recognized in itunes" or similar into the search bar at the top of this page by "Support".

HT3302 My Ipod touch 8gb will not turn back on no matter what i do i have tried just the power button, the power button and home button, and connecting it to the computer and the battery wasn't close to being dead non of them work what do i do?

My Ipod touch 8gb will not turn back on no matter what i do i have tried just the power button, the power button and home button, and connecting it to the computer and the battery wasn't close to being dead non of them work what do i do?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I have a 17" Macbook pro with flickering red and cyan(blue) lines across the screen. The issue disappears temporarily when I tap on the computer, and the problem does not occur when I use external display or try to screen capture the problem.

I purchased my Macbook (17") through a certified apple tecnition in August 2012, it was refurbished and the motherboard was completely replaced. I do a lot of photo editing, but I have been unable to do so because of the red vibrating lines that interrupt my screen. The issue disappears temporarily when I tap on the computer, and the problem does not occur when I use external display or try to screen capture the problem. I brought the computer back to the technition I purchased it from and he said that it was a problem with my fan, so I have two new fans but the issue is still occuring. He says he doesnt know whats wrong. Does anyone have any information on this issue?
Here is an image of the issue
http://www.flickr.com/photos/67839707@N08/8884847081/

I recommend having your Mac serviced by someone competent. A force sufficient to "blow apart" the fans was clearly excessive and may have damaged the display cable, as well as any number of other problems.
Dust is properly cleaned with a vacuum, preferably one designed for computer service, and they are not cheap.
Compressed air should never be used. It just blows dust everywhere, often into places where it can no longer be removed.

My i pod is working fine till i plug it into the computer and the i tunes logo appeared now it wont go back to original stting i cant even open and browse the i tunes logo stays on.. what do i have to do

my ipod is workingfine till i plugged it into the computer and the i tunes logo stays on . wan t to open and go back to regular setting .how could i do it?

Sounds like you are in recovery mode. Try using RecBoot to kick it out of recovery. If that does not work, you may need to restore.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

I have a Iphone and I want to downloa a game but it's over 50MG or MB so it says you must connect to wifi or download from a computer so I downloaded it from the computer and the computer says the downloads done but the app bar is empty and says waiting..

I have a Iphone and I want to downloa a game but it's over 50MB so it says you must connect to wifi or download from a computer so I downloaded it from the computer and the computer says the downloads done but the app bar is empty and says "waiting.."

Need to Resume download to complete the ongoing Process.
Last Resort, put the iPhone in DFU mode (Google How to do that). Connect in iTunes. Follow on-screen prompts to Restore. All Data would be lost, if not backed up earlier.
To save the photographs you may have to use third party software. Google is your friend.

Please help me on this, what happened was that i connected my ipad to the computer and the itunes library was empty although a week ago i had 48 apps on the itunes library

please help me on this, what happened was that i connected my ipad to the computer and the itunes library was empty although a week ago i had 48 apps on the itunes library

see my main ques was that i have an ipad 2 in which i have 48 apps and i hv made an itunes account in my computer in which i can backup my purchased apps and i had backed up36 of them so that i can delete them from my ipad if the memory is full but recently when i opened my itunes account in the computer it tells that you dont have any app on this account whereas on my ipad i still do have them, so cant i get all my backed up apps on the itunes account on my computer again?

I just installed Photoshop and want to use it as the external editor. I also have PS Elements on the computer and the only external editor I can get iPhoto to recognize is PSE. Any help in changing the external editor to PS would be appreciated!

I just installed Photoshop and want to use it as the external editor in iPhoto. I also have PS Elements on the computer and the only external editor I can get iPhoto to recognize is PSE. Any help in changing the external editor to PS would be appreciated!

Welcome. I am using Photoshop CS5 and this works fine for me. Possibly Adobe has changed this in CS6. Hopefully, LarryHN will have further suggestions. Best.

HT201413 I am receiving a message saying the iPod "TRACER's iPod" can not be synched. The required file can not be found. I ran the iTunes program repair and restarted both the computer and the iPod. Any suggestions on what else to try?

I am receiving a message saying the iPod "TRACER's iPod" can not be synched. The required file can not be found. I ran the iTunes program repair and restarted both the computer and the iPod. but still receive the same message. Any suggestions on what else to try?

That can sometimes be caused by a damaged ipod photo cache.
If you remove the current ipod photo cache, does that get you past the error?
For instructions on where to find it, see the following document:
iTunes: Understanding the iPod Photo Cache folder

HT201210 you are running the latest version of iTunes, have no other USB devices attached, have no security software installed, and are directly connected to your ISP source, simply restarting the computer and the iOS device can clear up certain issues th

you are running the latest version of iTunes, have no other USB devices attached, have no security software installed, and are directly connected to your ISP source, simply restarting the computer and the iOS device can clear up certain issues that could prevent you from restoring. After restarting the computer and iOS device, attempt to restore again.

How big is your library? I would recommend the following troubleshooting steps:
- Backup your library. Always a good idea before messing with things.
- Create a new library.   Refer to this article for details: http://support.apple.com/kb/HT1589. This won't delete your old library, you're just creating a new empty one. Also refer to this article to get back to your old library later.
- Add a few albums into this new library. Not everything, just a small sampling, as a test.
- Activate Match on this new library. You shouldn't have to re-pay, it should just say "Add Computer" or similar.
- At this point, Match should run again. With just a few albums it should complete in just a few minutes.
If iTunes doesn't crash at this point, then likely there's something about your original library that Match doesn't like - what that is I don't know, but at least you'll know it's not your PC.   If iTunes still crashes, then if could be a number of other things, but probably not your library.   My next suggestion (if you haven't already done this) is to uninstall / reinstall iTunes.   If that doesn't work, then my next ideas you won't like.

Communication between the computer and the disc drive failed

Similar Messages

Maybe you are looking for