Communication between the primary server the gateway server

hallo
Can I set the directional communication between the primary server the gateway server, so it feels by the following example?
And if so how?
Agent
à GW
ß GW
ß MS
*Agent communicates with GW1 and reported it
*GW SEND report to GW2
*GW2 Send the the data to MS
thanks
<o:p></o:p>
אם תגובתי פתרה את בעייתך - לחץ/י, על "סמן כתשובה" ליד סימן ה V הירוק.

Hi,
As far as I know, Gateways dont talk to each other. Why you need two GW, with one GW and report to your management servers, this way should work.
Here is a similar thread for your reference:
https://social.technet.microsoft.com/Forums/systemcenter/en-US/323d5aab-bad4-4c23-b096-27a62757ae31/communications-between-2-gateway-servers-and-2-ms?forum=operationsmanagerdeployment
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

Communication between the DNS/DHCP Manager and OES Server

No communication between the DNS/DHCP Manager Console and OES server (status,start,stop)
The screenshot shows the tab "DHCP (OES Linux)" in the DNS / DHCP Manager console
in the bottom of the image it shows the state of the DHCP servers.
allDHCP.JPG
The dhcp service is started on all these servers
You can see that the status is known only for four servers.
The button "start/stop DHCP service" works fine on this servers and
the dhcp service can be canceled and also restarted
But the status of the "dhcp service" is not recognized for all the other DHCP servers
and so we can not start or stop dhcp service on these servers.
All servers were installed at different times (last three years) with OES11 and
are upgraded to OES11SP2 with all patches.
The server keto (DHCP_keto) is a new installation OES11SP2 few days ago.
All OES servers were set up identically from me. LDAP, LUM, DMS, DHCP works fine.
Which service on the OES server is responsible for
communication (status indicator) between the DNS/DHCP Manager and the OES serve?
How the status query is performed by the DNS/DHCP Manager?
How can I test the communication to the server on the client (console)?
Which configurationfiles I should be compare on the server?
Thanks in advance
Gernot

gernot,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://www.novell.com/support and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Forums Team
http://forums.novell.com

Communication between two Macs Server

Communication between two Macs Server:
Can they work together and communicate and interact normally in a PowerMac network, OS X 10.5.8 Server installed, and a MacPro computer that is running Server 4.0.3 on Yosemite? Had to do some additional implementation?
Regards

from the JavaDocs:
http://java.sun.com/j2ee/1.4/docs/api/javax/servlet/ServletContext.html
getContext
public ServletContext getContext(java.lang.String uripath)
Returns a ServletContext object that corresponds to a specified URL on the server.
This method allows servlets to gain access to the context for various parts of the server, and as needed obtain RequestDispatcher objects from the context. The given path must be begin with "/", is interpreted relative to the server's document root and is matched against the context roots of other web applications hosted on this container.
In a security conscious environment, the servlet container may return null for a given URL.
Parameters:
uripath - a String specifying the context path of another web application in the container.
Returns:
the ServletContext object that corresponds to the named URL, or null if either none exists or the container wishes to restrict this access.
See Also:
RequestDispatcher

Communication between client and server

I am using sockets for communication between the client and the server. is there any other way that i can use for communication between the client and server???

Plenty of ways: JMS, SOAP, RMI, a RESTful API, writing-files-to-a-shared-directory-on-the-disk, Sneakernet, ...
Some of them use sockets (or better TCP/IP) as the underlying protocol.
But to give you a good answer, you would have to tell us why you want a different way. I hope you're not searching for a different way just for the sake of being different.

Communication between the computer and the disc drive failed

The disc can’t be burned because because communication between the computer and the disc drive failed (error code 0x80020022). This computer has been out of the box for less than a month and this has been a growing problem.

My problem was FIXED at the apple store..... there was something wrong in the system preferences and the genius deleted something that recreated it's self. Surely enough we we're able to burn a 600 mb dmg of nothing onto a few test disks. For anyone having this issue...it's NOT The media, it's some configuration issue within the computer's preferences. I'm telling you all to take your machine to the nearest apple store and have them fix it, if your machine is still under warranty the fix is free. There was no hardware issue, so the optical drive was not replaced.

Email links out of Practice Fusion are not active (as they are in IE), which they say is a problem with "something lost in the communication between the Flash engine and the browser". Does anyone have experience with this?

This is a medical records system, cloud based. I use Firefox to get into the system, but any browser would work. Other than this problem, Firefox works fine (better than IE, in my opinion).
Patient demographics include their email, which is hyperlinked and should go right to Outlook (my default email program). This works in IE, but nothing happens on the click when using Firefox as the browser.
I queried Practice Fusion, which replied: In regards to your previous question about the email hyperlink in the patient information, it looks this is not something that can be fixed on our end right now. It is the web browsers' responsibility to handle these types of links, and there seems to be something lost in the communication between the Flash engine and the browser. I apologize for any inconvenience.
Thanks for any help anyone can provide.

See if this helps you:
http://support.mozilla.com/en-US/kb/Changing+the+e-mail+program+used+by+Firefox

I have burned CDs before from 2gb to 7gb using different types of discs. Now I get this error message Apple error The disc can't be burned because communication between the computer and the disc drive failed (error code 0x80020022). What should I do

I have burned CDs before from 2gb to 7gb using different types of discs. Now I get this error message Apple error The disc can't be burned because communication between the computer and the disc drive failed (error code 0x80020022). What should I do

Reset the SMC, as per > Resetting the System Management Controller (SMC)
1. Shut down the computer.
2. Unplug the computer's power cord.
3. Wait fifteen seconds.
4. Attach the computer's power cord.
5. Wait five seconds, then press the power button to turn on the computer.
Then zap the PRAM/NVRAM as per > About NVRAM and PRAM
1. Shut down the computer.
2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3. Turn on the computer.
4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
6. Release the keys.
Then retry the Disc Drive.

No communication between the two nodes in weblogic cluster

Hi All,
We have installed weblogic cluster in our environment(LINUX 64-Redhat.5).On one node admin server ,managed server1,on second node we have managed server2.When we try to deploy application on one node it is not getting reflected in othe node.We have ran datagram test to check communication between 2 node.
Here we observed that listener and pulisher are picking wrong IPs not the server Ips.
can any one explain why and what is the problem.
thanks,
sudheer.

Hi Sudheer,
While performing the datagram test you mention the ports and ip so I am not sure how they are picking wrong ip and port. Follow the instructions to perform the test http://coherence.oracle.com/display/COH35UG/Performing+a+Datagram+Test+for+Network+Performance
Re the deployments, you need to ensure that multicast is enabled in your environment and both your managed server are in the same subnet otherwise you need to specify WKA for unicast communication. I am assuming that you are building SOA infrastructure as it internally uses Coherence for deploying applications and you can follow the instructions http://download.oracle.com/docs/cd/E15523_01/core.1111/e12036/extend_soa.htm#CHDEAFJH else use the intructions as mentioned here http://download.oracle.com/docs/cd/E17904_01/web.1111/e13709/features.htm
Hope this helps!
Cheers,
NJ

Socket communication between client and server

Hi all,
I am doing an assignment for communication between java client and java server using sockets. This communication is in the form of XML documents. I am facing a problem in this communication.
Actually at Server side I'm creating an XML document(Document type object) using DocumentBuilderFactory in javax.xml.parsers package and transforming this Document into a stream using StreamResult.
My code is :
Transformer xmlTransformer = TransformerFactory.newInstance().newTransformer();
StreamResult xmlString = new StreamResult(currentClientHandler.getSocketOutputStream());
DOMSource xmlDocSource = new DOMSource(xmlDocument); // xmlDocument is Document type reference
xmlTransformer.transform(xmlDocSource, xmlString);
so, this xmlString(i.e. StreamResult) is passed directly into the output stream. Here I need to close() output stream after transform() call to help SAX parser to know about end of stream.
Now at Client side, I am parsing this stream using SAX parser. It parses this correctly. But when sending some another data back to Server when client opens output stream, it given Socket closed exception. I know that closing input or output stream closes socket. But in my problem, I have to send data in streams and not by using files or byte[] etc.
So what is nearest solution to problem ??
Plz help me. Any kind of help will be greatly appreciated.

hi
thanks for ur reply.
I didnt get any error msg while getting the back the datas.
Actually i divided my application into two parts.
My application will act as both server and client.
server ll get the browser request and send to the client and the client will send that data to the c++ server.
Im able to do that.and unable to get the data from server.
Didnt get any error.
can u tell me how to make an application to act as both client and server.
I think im wrong in that part.
thanks a lot

Communicating between the parent and child windows in Struts

Hey,
I would like to know what is the best way to communicate between the child and parent windows on a struts based web application. For example i have a struts based jsp page. I call a child window from this page. On the child window i select few values and they have to be shown on the parent. What is the best way to achieve this in struts.
Thanks
in advance.
KM

The only way to do this without Javascript is to have the child window have a form and the form has a target defined as the name of the parent window (how to name it without using frames or having it open from another window, I'm not sure), and when you submit the form, it'll submit to the parent window/frame and you can process that form on the server and return the same parent page with the selected values.
Otherwise, you need Javascript to set form values to "window.opener" from the child window.
Either way, it's not really a Struts thing, technically.

Communication between the secondary community VLANs hosts

Hi Guys,
The hosts in the secondary community private VLANs are permitted to talk each other. If there is no promiscuous port/host defined, will the community VLAN hosts be able to talk each other?
Or all the intra-community VLAN traffic is routed via promiscuous port?
CF

Hi CF,
If there is no promiscuous port/host defined, will the community VLAN hosts be able to talk each other?
I suppose you want to ask whether hosts in different community VLANs will be able to talk to each other if there is no promisc port defined. The answer is - no, they will not be able to communicate, but they would not be able to communicate even if the promisc port was created. Their communication over the promisc port would be allowed only if the device connected to that promisc port was willing to do hairpin routing - that is, receive and forward a packet back the same interface. Usually, you do not want your different community VLANs to communicate to each other - that is why you created them in the first place - so you'd usually make sure that whatever device is connected to a promisc port, it does not do routing or is prevented from hairpin routing via an ACL, for example.
With respect to mutual communication of hosts in a single community VLAN - these hosts will be able to communicate to each other just as if it was a totally normal VLAN. The existence or non-existence of a promisc port has no influence on this.
Feel welcome to ask further!
Best regards,
Peter

Is there any way to spy the data communicating between the GPIB and the PC.

HI
I have a device communicating with my PC using IEEE 488 GPIB card. Do we have any way to spy the data exchanged by the device and the PC running a different application.
I am trying to program an application that needs to gather data from a HP 54602A - 150 MHz - 4 Channel oscilloscope using a IEEE 488 add-on card. I am able to talk to the device and request the device number through MAX. I need to know the other commands to the oscilloscope. Can any one help me in this regard.
With Regards
S.Gopal

Launch NI Spy (Start >> Programs >> National Instruments >> NI Spy). You may want to configure it to capture 64k of data instead of 64 bytes since the strings sent to the device may be larger than 64 bytes.
Start capturing with NI Spy and then run the application. All of the calls made to the device will be captured in NI Spy. You can then look at the data buffers to determine what strings are being sent to your device.

Have a G-5 & Hp 2610. Help me to regain communication between the two?

My G5 and HP Photosmart were just fine until I downloaded Internet Explorer
and an upgrade of Adobe 7. Now the computer doesn't talk to the printer. Reinstallation of the printer driver now tells me I need admin permission, but I am the admin. I'm so stuck and desparate.

Hi, cracker -
Welcome to Apple's Discussions.
This is the OS 9 forum. Since no G5 can boot to OS 9, you may get quicker, more knowledgeable responses if you repost your question in one of the appropriate -
G5 forums - http://discussions.apple.com/category.jspa?categoryID=108
OSX forums:
OSX 10.3 - http://discussions.apple.com/category.jspa?categoryID=161
OSX 10.4 - http://discussions.apple.com/category.jspa?categoryID=160

Is FaceTime free for both parties communicating between the U.S. and Europe?

I would like to communicate with a friend in Europe using Facetime, but I am hesitant for fear of incurring fees for either myself or my friend. My friend is staying at a hotel that has wi-fi. I have an iMac and my friend in Europe has an iPad.

Thx mende1,that was well quick..reds Bobsau

Communication between two jvm (client and server)

Hi ,
   I want to access the UME service of the SAP J2EE Container using a stanalone client application.
So the client would be running on remote JVM.
Here we use the JNDI service to communicate between the client and server.
p.put(Context.INITIAL_CONTEXT_FACTORY,"com.sap.engine.services.jndi.InitialContextFactoryImpl");
                    p.put(Context.PROVIDER_URL, providerURL.trim());
                    p.put(Context.SECURITY_PRINCIPAL, securityPrinciple.trim());
                    p.put(Context.SECURITY_CREDENTIALS, securityCredentials.trim());
                    Context ctx = (Context) new InitialContext(p);
                    Object objRef = ctx.lookup(ejbName.trim());
I want to know that is the communication between the client and server secured in this scenario
Best Regards
Manoj

Okay, the client and server VMs are different implementations of the Hotspot engine. Hotspot basically takes the Java bytecode from your .class files and turns it into native machine instructions at runtime. (The optimizations are actually much more complex than that, but that's the basic concept.)
The client VM is so named because it's designed to be used for GUI-type applications interacting with the user. It is designed to have a quicker startup and smaller memory footprint.
The server VM uses more memory and is typically slower at starting up than the client VM, but can often perform ridiculously fast. This of course depends completely on the particular code being run, and you should probably profile and see which VM works better for your application.
Some interesting optimizations are performed by the 1.4.1 server VM, such as: removal of array-bounds checks (when it determines that the index can't become out of bounds), inlining of methods, and more.
Here is a link to more info if you're interested:
http://java.sun.com/products/hotspot/docs/whitepaper/Java_HotSpot_WP_Final_4_30_01.html

Communication between the primary server the gateway server

Similar Messages

Maybe you are looking for