Communication channel alerts

Hi,
We have a ccms system. I would like to know for a specific communication channel whther any alerts has been setup.
I assume normally alerts would be generic across any communication channel errors.
If yes, please guide where to check and the necessary steps.
Regards
Krish

Prateek,
These are production ones and any alerts raised would be going to third party support group.
We wanted to see whether any alerts has been setup for this channel and check whether the alerts are reaching them.
Regards
Krish

Similar Messages

How to receive alert mails when communication channel fails

Hi everybody,
Today there were in the "Communication Channel Monitoring" of the Runtime Workbench some Communication Channels in a "red" status and I would like to know if it is possible to receive per mail any alerts about a failing communication channel?
In SXMB_MONI the error is the following:
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed Connect_PM TYPE=B MSHOST=ECPOPR1.corp GROUP=PRODUCCION_SANTANDER R3NAME=PR1 MSSERV=sapmsPR1 PCS=1 ERROR partner not reached (host ECPOPR1.corp, service sapmsPR1) TIME Mon Apr 20 03:25:16 2009 RELEASE 640 COMPONENT NI (network interface) VERSION 37 RC -10 MODULE nixxi_r_mt.cpp LINE 8688 DETAIL NiPConnect2 SYSTEM CALL SiPeekPendConn ERRNO 79 ERRNO TEXT A remote host refused an attempted connect operation. COUNTER 1</SAP:AdditionalText>
Usually, I receive mail alerts when messages failed since I have CCMS configurated but in the CCMS I don´t see any entries for this kind of errors with a Communication Channel...
Thanks in advance,
Regards,
Olivier

Hi!
You can receive Alerts even though you are configured CCBPM. Through Control Step you can throw alerts but only difference between PI7.1 and XI is in 7.1 you can easily create Alert categoy in ESR itself at java stack but in XI you can't create it in Java stack you need to create this ALert category though ALRTCATDEF t code in ABAP Stack even though in 7.1 you created in Java Stack it will be reflecting in ABAP Stack.
Next thing is later you need to Configure ALert Rules in RWB and in ABAP Stack at Alert Category you need to Add your XI SAP ID;s at FIxed Receipients and before adding this Ask your Basis people to link your company mail ID or any mail ID with SAP ID so that you can receive Alerts both in RWB ALert Inbox as well as your Mail Server.
Since the above experts given diff blogs you can easily configure...
I hope u understand the flow....right ?
Regards::
Amar Srinivas Eli

Error in JMS Communication Channel not raising alert

Processing Errors in JMS Communication Channel are not raising alerts.
The settings on the communication channel retires are set at 3 and 5min interval.
In RWB the JMS communication channel shows processing errors but an alert is not raised.
The alert are configured in our system and we even have a catch all alert rule with * (wildcard). Errors in PI message processing are raising alerts but errors in Comm Channel are not raising alerts.
The message in SXI_MONITOR shows as processed successfully but when we check the RWB and Comm. Channel Monitoring we see processing errors "Channel error occured; detailed error description: JMS error: Connection to the server has been terminated; Linked error: Connection reset, Error Code:null"
Are we missing any configuration? How do we get alerts/notifications if there are errors in Comm. Channel without having to login into RWB and watch it periodically?
Any help is greatly appreciated.
RM

Hi,
What is the staus of Communication channel in RWB when it fails, RED ??if yes then it should genarate alert.
create one more alert for specific to JMS interface and check it out.
Regards,
Raj

Alert if no file process :Same file adapter with same communication Channel

Hi XI Guru,
I have encountered 1 requirement from my client where, sender will send different data file with different file name. And there want XI to alert the user if no file to process for the schedule date. Please take note that the communication channel is common to all the sender.
Example:
Communication Channel : CC_FILE_SND
FILE_10.TXT ---> Every month on the 10, user have to send FILE_10.TXT to process
FILE_20.TXT ---> Every month on the 20, user have to send FILE_20.TXT to process
If user fail or forget to send the FILE_10.TXT and FILE_20.TXT on special schedule date to process, XI should alert user.
Many thanks

Hi Lord
<<< there want XI to alert the user if no file to process for the schedule date.
Can you tell me how you are planning to configure this schedule date in your sender file adapter. I mean this date will be fixed or it is going to be change according to the requirement.
Now for the second part in order to alert the user if file is not there, one solution is to use BPM with wait step ( specify the time in this step ), but then again it takes me back to my previous question, the time seems to be different everytime according to the requirement.

Capturing the communication channel monitoring error into an alert.

Hi,
The following is my scenario:
File adapter polls using file content conversion,if the source file is not in a proper format the file wont be picked up and communication channel will show error in channel monitoring.
I have to configure an alert for the same.
Can i capture the error message shown in communication channel monitoring and raise alert?
Many Thanks,
Pritish

refer todays thread on the same issue;
FILE ADAPTER ISSUE

Alert when Sender Communication channel is inactive/down

Hi,
Kindly let me know if we can generate an alert using alert configurations/rules when Sender Communication channel is inactive/down.
Thanks.
Regards,
Aditya.

May be in the channel monitoring the channel is stopped. If you are sure that the channel is active in ID and in Start mode in communication channel, then it is a cache issue. Then, perform full CPACache refresh.
Regards,
Prateek

ALERT MAIL FOR FILE ADAPTER COMMUNICATION CHANNEL ERRORS

Hi,
I need to send an alert by mail to a list of configured receivers if any error( Application as wel as System Errors ) occurs in the FILE ADAPTER Communication Channel .
Please suggest how to do it......
Regards,
Sriparna

Can anything be configured in the communication channel to run a mail unix script if the communication channel is throwing
error.Other than alert rule can we configure this.
Why do you intend to use script? Define Alert....create Rule....set parameters using SCOT.....you will get the alert as email (if you need it)
Can you please help with how do I create this rule specific to File Adapters only ?
Other than selecting FILE as Adapter Type in RWB --> Alert Rule definition we dont do anything special....this setting should help.
Regards,
Abhishek.

Reporting communication channel errors in emails from alert monitoring

Does anybody know how to capture the error message reported on the communication channel and send it in the dynamic text of the email configured for alert monitoring?
I get the mapping error messages but all other message container element values seem to be blank.
None of the container elements (standard) defined seem to have the channel error message. in PI 7.0
Thx

Hi,
You can get all the alerts that were captured by the adapter monitoring i.e, communicaiton channel errors etc.
we can also trigger similar alerts for Adapter also when any adapter truns in to RED.
in RWB->Alert configuration-> choose adapter engine errors also then you will get alerts for adapter failure also.
If you need create alerts for each communication channel. in RWB->Alert montoring->Adapter type-> instead of giving * select indival commnication channel
for this you need to have alter configured for each Commnication channel in Alrtcatdef and RWB. so for each in RWB you select corerspoding communication channel.
You can monitor the sender and receiver service in CCMS, but I don't think you can monitor the commuication channels.
http://help.sap.com/saphelp_nw04/helpdata/en/45/e32b64f87c6f74e10000000a1553f6/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/90/4e313f8815d036e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/28/83493b6b82e908e10000000a11402f/frameset.htm
Thanks
Swarup

Alerts for Communication Channels

Hi All,
I wanted to know whether it is possible to trigger alerts if an error occurs in the communication channel.If yes,how do I go about it?
Thanks and Regards,
Jishi

Hi,
For Alert rules configuration:
Remove the Check from Suppress Multiple Alerts of this Rule
For where did the error occur, see that you have selected Radio button with 'No Restriction
When creating the Alert Category, have u put some parameters in Container tab and Long and Short text.
If allt he above is done check if you have any dumps in ST22.
Regards
Vijaya

Alert from Communication Channel

Hi All,
In my scenario from File --> XI --> Proxy(ABAP), need to pole the file server folder between 9am to 10am every day . If the file not present at the specified time, need to raise an alert. So please let me know how to schedule the communication channel and from which version of XI it is possible? If it can work, then how to raise an alert?
Regards,
Praveen Kumar

Hi Praveen,
See this blog for scheduling communication channels:
/people/shabarish.vijayakumar/blog/2006/11/26/adapter-scheduling--hail-sp-19-
Regards,
Divija.

Error ORA-03113: end-of-file on communication channel in droppping a table

Good evening,
I am very new on Oracle and I have a problem with some tables. Without any reason, apparently, I can't drop some of my table. Oracle gives me this error:
ORA-03113: end-of-file on communication channel
and then close the connection of the user.
What I should have to do?
It is very important.
Thanks a lot
best regards
Anna Zanetti

Good morning, I still have the same problem, I can't drop a table from my database.
The message is again:
Re: Error ORA-03113: end-of-file on communication channel
The alert log file says:
Fri Nov 17 12:27:31 2006
Errors in file /usr/oracle/admin/oracledb/udump/oracledb_ora_4369.trc:
ORA-07445: exception encountered: core dump [0955C61F] [SIGSEGV] [Address not mapped to object] [0xC] [] []
and in file oracledb_ora_4369.trc there is:
Exception signal: 11 (SIGSEGV), code: 1 (Address not mapped to object), addr: 0xc, PC: [0x955c61f, 0955C61F]
Registers:
%eax: 0x00000000 %ebx: 0x00012d95 %ecx: 0x58301930
%edx: 0x00000000 %edi: 0x5830d9e8 %esi: 0x00000000
%esp: 0xbfffae1c %ebp: 0xbfffb060 %eip: 0x0955c61f
%efl: 0x00210282
(0x955c61f) movzw 0xc(%eax),%eax(0x955c623) cmp $30,%eax
(0x955c626) jle 0x955c63e
(0x955c628) xor %edx,%edx
(0x955c62a) push %edx
*** 2006-11-17 12:27:31.658
ksedmp: internal or fatal error
ORA-07445: exception encountered: core dump [0955C61F] [SIGSEGV] [Address not mapped to object] [0xC] [] []
Current SQL statement for this session:
drop table fiumiforjoin
----- Call Stack Trace -----
calling call entry argument values in hex
location type point (? means dubious value)
08856247 call 0885776A 1 ? 0 ? 1 ? 1 ? 0 ? 0 ?
08290320 call 0885605A 3 ? 0 ? 0 ? 0 ? 0 ? 0 ?
0955C61F signal 08290320 B ? BFFFAAB0 ? BFFFAB30 ?
0955D6BE call 0955C61F 5830F01C ? 0 ? FFFFFFFF ? 0 ?
1 ? 5830F01C ?
08DD1EEB call 0955CC22 BFFFB394 ? 0 ? 0 ? BFFFB348 ?
58EAB2B0 ? C ?
09434EF3 call 08DD1A28 BF2A8C4 ? BFFFC0C0 ?
BFFFC0C0 ? 4 ? B6AB0300 ?
B6ABC2E0 ?
094106E0 call 094326D4 4 ? 0 ? BFFFC0C0 ?
093D7BB5 call 0940FEF8 3 ? E ? BFFFC1F8 ? A4 ?
093D630C call 093D7AC4 BFFFCDF0 ? BFFFCD08 ? 17 ?
1 ? 0 ? A4 ?
08293DE6 call 0850FFFF 5E ? 14 ? BFFFCDEC ?
0A1ED44D call 08293DE6 5E ? 14 ? BFFFCDEC ? 0 ?
08292122 call 0A1ECAE4 BF2A8C0 ? 5E ? BFFFCDEC ? 0 ?
BFFFD6E8 ? BFFFD6E4 ?
0941F190 call 0829193C 0 ? 0 ? BF2A8C0 ? BF83090 ?
F1 ? 0 ?
08293DE6 call 0850FFFF 3C ? 4 ? BFFFEB08 ?
08291238 call 082937A8 3C ? 4 ? BFFFEB08 ? 0 ?
0828F403 call 08291012 3C ? 4 ? BFFFEB08 ?
08274A3D call 0828F39C BFFFEAEC ? 3C ? 4 ?
BFFFEB08 ? B6CC017C ?
B6C1A17C ?
__libc_start_main() call 08274A3D 2 ? BFFFEBA4 ? BFFFEBB0 ? 0 ?
+218 B6C1C898 ? B7600020 ?
Any idea of what I have to do?
Thanks for your help..
Best Regards
Anna Zanetti

Error ORA-03113: end-of-file on communication channel (while starting db)

Hello everybody! :-)
Looks like a need help with Oracle 11gr2 (RHEL 6 x64). Faced with a problem while starting database:
sqlplus / as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Fri Dec 7 01:43:45 2012
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 2538741760 bytes
Fixed Size 2216024 bytes
Variable Size 1828720552 bytes
Database Buffers 687865856 bytes
Redo Buffers 19939328 bytes
Database mounted.
ORA-03113: end-of-file on communication channel
Process ID: 6601
Session ID: 575 Serial number: 5
This is logfile (/u01/app/oracle/diag/rdbms/orcldocs1/orcldocs1/alert/log.xml):
<msg time='2012-12-07T01:52:22.363+04:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
host_id='localhost.localdomain' host_addr='127.0.0.1' module='[email protected] (TNS V1-V3)'
pid='6881'>
<txt>Errors in file /u01/app/oracle/diag/rdbms/orcldocs1/orcldocs1/trace/orcldocs1_ora_6881.trc:
ORA-19809: limit exceeded for recovery files
ORA-19804: cannot reclaim 28496896 bytes disk space from 5218762752 limit
</txt>
</msg>
<msg time='2012-12-07T01:52:22.363+04:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
host_id='localhost.localdomain' host_addr='127.0.0.1' module='[email protected] (TNS V1-V3)'
pid='6881'>
<txt>ARCH: Error 19809 Creating archive log file to '/u01/app/oracle/flash_recovery_area/ORCLDOCS1/archivelog/2012_12_07/o1_mf_1_249_%u_.arc'
</txt>
</msg>
<msg time='2012-12-07T01:52:22.368+04:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
host_id='localhost.localdomain' host_addr='127.0.0.1' module='[email protected] (TNS V1-V3)'
pid='6881'>
<txt>Errors in file /u01/app/oracle/diag/rdbms/orcldocs1/orcldocs1/trace/orcldocs1_ora_6881.trc:
ORA-16038: log 3 sequence# 249 cannot be archived
ORA-19809: limit exceeded for recovery files
ORA-00312: online log 3 thread 1: '/u01/app/oracle/oradata/orcldocs1/redo03.log'
</txt>
</msg>
<msg time='2012-12-07T01:52:22.368+04:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
host_id='localhost.localdomain' host_addr='127.0.0.1' module='[email protected] (TNS V1-V3)'
pid='6881'>
<txt>USER (ospid: 6881): terminating the instance due to error 16038
</txt>
</msg>
<msg time='2012-12-07T01:52:23.540+04:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
host_id='localhost.localdomain' host_addr='127.0.0.1' module='[email protected] (TNS V1-V3)'
pid='6881'>
<txt>Instance terminated by USER, pid = 6881
</txt>
</msg>
How can I resolve it, please advice. Thank you.
Edited by: user9001403 on 06.12.2012 5:58

Hi,
Looks like your archivelog space is exhausted. Increase the db_recovery_file_dest_size size and check.
SQL> show parameter db_recovery
NAME                                 TYPE        VALUE
db_recovery_file_dest                string      /oracle/flash_recovery_area
db_recovery_file_dest_size           big integer 3882MRegards,
Anand.

XI Communication Channel Error Explanation

Hi All,
Does anyone happen to know :-
1) Is it possible to use CCMS to email the errors coming from a communication channel error Explanation field
2) Are these messages stored in a table I can check
The reason I need to know this is because we sometimes encounter an error such as "Conversion of file content to XML failed at position 838: java.lang.Exception: ERROR converting document line no. 839 according to structure 'XXX_XXX_XXX':java.lang.Exception: ERROR in configuration / structure 'XXX_XXX_XXX.': More elements in file csv structure than field names specified!
This tells us exactly where the error occurred but using Communication Channel Monitoring the error message only remains for a little while before the polling messages remove it from the display. Since the process runs early hours of the morning we never get to see these messages.
Any help appreciated.
Thanks
Craig

Hi Raquel,
Let me try to clear out some things in this thread . First of all you do your alert configuration which you say you have already done. Thats good . Now you ask that you want only to monitor the communication channels and you want specific guide . Here is the specific guide.
If you have configured alerts you will know that when you create an alert rule you have the option to choose radio button where did the error occur it could be no restriction , integration engine or adapter engine. You need to choose adapter engine.
Now whenever the colour of the lights change to red. You will get your alerts.
Regards
joel
Edited by: joel trinidade on Apr 9, 2009 9:41 AM

ORA-03113: end-of-file on communication channel

Hi
While I startup Oracle database, i get the following error. What could be the issue and how to resolve this.
SQL> startup
ORACLE instance started.
Total System Global Area 864333824 bytes
Fixed Size 2231368 bytes
Variable Size 704644024 bytes
Database Buffers 150994944 bytes
Redo Buffers 6463488 bytes
Database mounted.
ORA-03113: end-of-file on communication channel
Process ID: 6507
Session ID: 580 Serial number: 5
Below is the content from alert log and trace log
*#alert_orcl.log#*
Bad header found during crash/instance recovery
Reading datafile '+DATA/orcl/datafile/sysaux.257.762570243' for corruption at rdba: 0x0080f01b (file 2, block 61467)
Data in bad block:
type: 255 format: 2 rdba: 0x0000a2ff
last change scn: 0x0000.0080019f seq: 0x0 flg: 0x00
spare1: 0x0 spare2: 0x0 spare3: 0x4ff
consistency value in tail: 0x643e0346
check value in block header: 0x0
Read datafile mirror 'ASM5' (file 2, block 61467) found same corrupt data (no logical check)
block checksum disabled
Reading datafile '+DATA/orcl/datafile/sysaux.257.762570243' for corruption at rdba: 0x0080019f (file 2, block 415)
Read datafile mirror 'ASM4' (file 2, block 415) found same corrupt data (no logical check)
Read datafile mirror 'ASM1' (file 2, block 61467) found same corrupt data (no logical check)
Hex dump of (file 2, block 34539) in trace file /appl/oracle/diag/rdbms/orcl/orcl/trace/orcl_p000_6831.trc
Corrupt block relative dba: 0x008086eb (file 2, block 34539)
Bad header found during crash/instance recovery
Data in bad block:
type: 1 format: 6 rdba: 0x0000a201
last change scn: 0x0000.008086eb seq: 0x0 flg: 0x00
Read datafile mirror 'ASM3' (file 2, block 415) found same corrupt data (no logical check)
spare1: 0xbb spare2: 0xe1 spare3: 0x4ff
consistency value in tail: 0x02c20304
check value in block header: 0x0
block checksum disabled
Reading datafile '+DATA/orcl/datafile/sysaux.257.762570243' for corruption at rdba: 0x008086eb (file 2, block 34539)
Read datafile mirror 'ASM2' (file 2, block 34539) found same corrupt data (no logical check)
Hex dump of (file 2, block 420) in trace file /appl/oracle/diag/rdbms/orcl/orcl/trace/orcl_p002_6839.trc
Corrupt block relative dba: 0x008001a4 (file 2, block 420)
Bad header found during crash/instance recovery
Data in bad block:
type: 255 format: 2 rdba: 0x0000a206
last change scn: 0xe1f3.008001a4 seq: 0x74 flg: 0x00
spare1: 0x0 spare2: 0x0 spare3: 0x401
consistency value in tail: 0x474f4c20
check value in block header: 0x0
block checksum disabled
Reading datafile '+DATA/orcl/datafile/sysaux.257.762570243' for corruption at rdba: 0x008001a4 (file 2, block 420)
Read datafile mirror 'ASM4' (file 2, block 420) found same corrupt data (no logical check)
Read datafile mirror 'ASM1' (file 2, block 34539) found same corrupt data (no logical check)
Read datafile mirror 'ASM3' (file 2, block 420) found same corrupt data (no logical check)
Hex dump of (file 1, block 3097) in trace file /appl/oracle/diag/rdbms/orcl/orcl/trace/orcl_p002_6839.trc
Corrupt block relative dba: 0x00400c19 (file 1, block 3097)
Bad header found during crash/instance recovery
Data in bad block:
type: 2 format: 6 rdba: 0x0000a202
last change scn: 0x0000.00400c19 seq: 0x0 flg: 0x00
spare1: 0xdf spare2: 0xe2 spare3: 0x4ff
consistency value in tail: 0x09c10280
check value in block header: 0x0
Hex dump of (file 2, block 34765) in trace file /appl/oracle/diag/rdbms/orcl/orcl/trace/orcl_p000_6831.trc block checksum disabled
Corrupt block relative dba: 0x008087cd (file 2, block 34765)
Reading datafile '+DATA/orcl/datafile/system.256.762570243' for corruption at rdba: 0x00400c19 (file 1, block 3097)
Bad header found during crash/instance recovery
Data in bad block:
type: 255 format: 1 rdba: 0x0000a206
last change scn: 0xe27b.008087cd seq: 0x74 flg: 0x00
spare1: 0x0 spare2: 0x0 spare3: 0x401
Read datafile mirror 'ASM5' (file 1, block 3097) found same corrupt data (no logical check)
consistency value in tail: 0x00000000
check value in block header: 0x0
block checksum disabled
Reading datafile '+DATA/orcl/datafile/sysaux.257.762570243' for corruption at rdba: 0x008087cd (file 2, block 34765)
Read datafile mirror 'ASM3' (file 2, block 34765) found same corrupt data (no logical check)
Read datafile mirror 'ASM2' (file 1, block 3097) found same corrupt data (no logical check)
Hex dump of (file 3, block 272) in trace file /appl/oracle/diag/rdbms/orcl/orcl/trace/orcl_p002_6839.trc
Reading datafile '+DATA/orcl/datafile/undotbs1.258.762570243' for corruption at rdba: 0x00c00110 (file 3, block 272)
Read datafile mirror 'ASM1' (file 3, block 272) found same corrupt data (logically corrupt)
Read datafile mirror 'ASM5' (file 2, block 34765) found same corrupt data (no logical check)
Hex dump of (file 2, block 34771) in trace file /appl/oracle/diag/rdbms/orcl/orcl/trace/orcl_p000_6831.trc
Corrupt block relative dba: 0x008087d3 (file 2, block 34771)
Bad header found during crash/instance recovery
Data in bad block:
type: 1 format: 6 rdba: 0x0000a201
last change scn: 0x0000.008087d3 seq: 0x0 flg: 0x00
spare1: 0x3a spare2: 0xe3 spare3: 0x4ff
consistency value in tail: 0x00045055
check value in block header: 0x0
block checksum disabled
Reading datafile '+DATA/orcl/datafile/sysaux.257.762570243' for corruption at rdba: 0x008087d3 (file 2, block 34771)
Read datafile mirror 'ASM3' (file 2, block 34771) found same corrupt data (no logical check)
Read datafile mirror 'ASM2' (file 3, block 272) found same corrupt data (logically corrupt)
RECOVERY OF THREAD 1 STUCK AT BLOCK 272 OF FILE 3
Read datafile mirror 'ASM5' (file 2, block 34771) found same corrupt data (no logical check)
Wed Jun 27 05:49:55 2012
Hex dump of (file 2, block 65353) in trace file /appl/oracle/diag/rdbms/orcl/orcl/trace/orcl_dbw0_6713.trc
Corrupt block relative dba: 0x0080ff49 (file 2, block 65353)
Bad header found during buffer corrupt after write
Data in bad block:
type: 1 format: 6 rdba: 0x0000a206
last change scn: 0xe2bf.0080ff49 seq: 0x74 flg: 0x00
spare1: 0xf5 spare2: 0xe0 spare3: 0x602
consistency value in tail: 0x00000000
check value in block header: 0x0
block checksum disabled
Reread of rdba: 0x0080ff49 (file 2, block 65353) found different data
Hex dump of (file 2, block 65356) in trace file /appl/oracle/diag/rdbms/orcl/orcl/trace/orcl_dbw0_6713.trc
Corrupt block relative dba: 0x0080ff4c (file 2, block 65356)
Bad header found during buffer corrupt after write
Data in bad block:
type: 2 format: 6 rdba: 0x0000a206
last change scn: 0xe2a7.0080ff4c seq: 0x74 flg: 0x00
spare1: 0xbf spare2: 0xe2 spare3: 0x602
consistency value in tail: 0x00000059
check value in block header: 0x0
block checksum disabled
Reread of rdba: 0x0080ff4c (file 2, block 65356) found different data
Hex dump of (file 2, block 66114) in trace file /appl/oracle/diag/rdbms/orcl/orcl/trace/orcl_dbw0_6713.trc
Corrupt block relative dba: 0x00810242 (file 2, block 66114)
Bad header found during preparing block for write
Data in bad block:
type: 255 format: 1 rdba: 0x0000a206
last change scn: 0xe1bb.00810242 seq: 0x74 flg: 0x00
spare1: 0x0 spare2: 0x0 spare3: 0x401
consistency value in tail: 0x800102c1
check value in block header: 0x0
block checksum disabled
Errors in file /appl/oracle/diag/rdbms/orcl/orcl/trace/orcl_dbw0_6713.trc (incident=292893):
ORA-00600: internal error code, arguments: [kcbzpbuf_1], [4], [1], [], [], [], [], [], [], [], [], []
Incident details in: /appl/oracle/diag/rdbms/orcl/orcl/incident/incdir_292893/orcl_dbw0_6713_i292893.trc
Use ADRCI or Support Workbench to package the incident.
See Note 411.1 at My Oracle Support for error and packaging details.
Exception [type: SIGBUS, Non-existent physical address] [ADDR:0x72BFFFF8] [PC:0x3612E7CAE9, _wordcopy_bwd_dest_aligned()+185] [flags: 0x0, count: 1]
Errors in file /appl/oracle/diag/rdbms/orcl/orcl/trace/orcl_p000_6831.trc (incident=293021):
ORA-07445: exception encountered: core dump [_wordcopy_bwd_dest_aligned()+185] [SIGBUS] [ADDR:0x72BFFFF8] [PC:0x3612E7CAE9] [Non-existent physical address] []
Incident details in: /appl/oracle/diag/rdbms/orcl/orcl/incident/incdir_293021/orcl_p000_6831_i293021.trc
Use ADRCI or Support Workbench to package the incident.
See Note 411.1 at My Oracle Support for error and packaging details.
Exception [type: SIGSEGV, SI_KERNEL(general_protection)] [ADDR:0x0] [PC:0x546B040, kcbs_dump_adv_state()+634] [flags: 0x0, count: 2]
Wed Jun 27 05:49:59 2012
Dumping diagnostic data in directory=[cdmp_20120627054959], requested by (instance=1, osid=6831 (P000)), summary=[incident=293021].
Errors in file /appl/oracle/diag/rdbms/orcl/orcl/trace/orcl_p000_6831.trc (incident=293022):
ORA-07445: exception encountered: core dump [kcbs_dump_adv_state()+634] [SIGSEGV] [ADDR:0x0] [PC:0x546B040] [SI_KERNEL(general_protection)] []
ORA-07445: exception encountered: core dump [_wordcopy_bwd_dest_aligned()+185] [SIGBUS] [ADDR:0x72BFFFF8] [PC:0x3612E7CAE9] [Non-existent physical address] []
Incident details in: /appl/oracle/diag/rdbms/orcl/orcl/incident/incdir_293022/orcl_p000_6831_i293022.trc
Use ADRCI or Support Workbench to package the incident.
See Note 411.1 at My Oracle Support for error and packaging details.
Exception [type: SIGSEGV, SI_KERNEL(general_protection)] [ADDR:0x0] [PC:0x546B040, kcbs_dump_adv_state()+634] [flags: 0x0, count: 1]
Errors in file /appl/oracle/diag/rdbms/orcl/orcl/incident/incdir_293021/orcl_p000_6831_i293021.trc:
ORA-00607: Internal error occurred while making a change to a data block
ORA-00602: internal programming exception
ORA-07445: exception encountered: core dump [kcbs_dump_adv_state()+634] [SIGSEGV] [ADDR:0x0] [PC:0x546B040] [SI_KERNEL(general_protection)] []
ORA-07445: exception encountered: core dump [_wordcopy_bwd_dest_aligned()+185] [SIGBUS] [ADDR:0x72BFFFF8] [PC:0x3612E7CAE9] [Non-existent physical address] []
Errors in file /appl/oracle/diag/rdbms/orcl/orcl/trace/orcl_dbw0_6713.trc (incident=292894):
ORA-07445: exception encountered: core dump [kcbs_dump_adv_state()+634] [SIGSEGV] [ADDR:0x0] [PC:0x546B040] [SI_KERNEL(general_protection)] []
ORA-00600: internal error code, arguments: [kcbzpbuf_1], [4], [1], [], [], [], [], [], [], [], [], []
Incident details in: /appl/oracle/diag/rdbms/orcl/orcl/incident/incdir_292894/orcl_dbw0_6713_i292894.trc
Use ADRCI or Support Workbench to package the incident.
See Note 411.1 at My Oracle Support for error and packaging details.
Dumping diagnostic data in directory=[cdmp_20120627055004], requested by (instance=1, osid=6713 (DBW0)), summary=[incident=292893].
Wed Jun 27 05:50:08 2012
PMON (ospid: 6679): terminating the instance due to error 471
Wed Jun 27 05:50:08 2012
ORA-1092 : opitsk aborting process
Wed Jun 27 05:50:08 2012
License high water mark = 4
Instance terminated by PMON, pid = 6679
USER (ospid: 6860): terminating the instance
Instance terminated by USER, pid = 6860
*#trace logs#*
Corrupt block relative dba: 0x00810242 (file 2, block 66114)
Bad header found during preparing block for write
Data in bad block:
type: 255 format: 1 rdba: 0x0000a206
last change scn: 0xe1bb.00810242 seq: 0x74 flg: 0x00
spare1: 0x0 spare2: 0x0 spare3: 0x401
consistency value in tail: 0x800102c1
check value in block header: 0x0
block checksum disabled
kcra_dump_redo_internal: skipped for critical process
kcbz_try_block_recovery <1, 8454722>: tries=0 max=5 cur=1340797795 last=0
BH (0x7bbe0fc8) file#: 2 rdba: 0x00810242 (2/66114) class: 1 ba: 0x7b8f4000
set: 12 pool: 3 bsz: 8192 bsi: 0 sflg: 2 pwc: 0,0
dbwrid: 0 obj: 68150 objn: -1 tsn: 1 afn: 2 hint: f
hash: [0x912f45b0,0x912f45b0] lru-req: [0x7bbdfdb0,0x90deff60]
lru-flags: on_auxiliary_list
obj-flags: object_write_list
ckptq: [0x7bbfc4c8,0x7bbea0a8] fileq: [NULL] objq: [0x8b251480,0x8b251480] objaq: [0x8b251450,0x7bbe0e88]
st: INST_RCV md: NULL rsop: 0x90d110e0
flags: buffer_dirty being_written block_written_once recovery_resilver
recovery_read_complete
cr pin refcnt: 0 sh pin refcnt: 0
kcra_dump_redo_internal: skipped for critical process
Incident 292893 created, dump file: /appl/oracle/diag/rdbms/orcl/orcl/incident/incdir_292893/orcl_dbw0_6713_i292893.trc
ORA-00600: internal error code, arguments: [kcbzpbuf_1], [4], [1], [], [], [], [], [], [], [], [], []
Incident 292894 created, dump file: /appl/oracle/diag/rdbms/orcl/orcl/incident/incdir_292894/orcl_dbw0_6713_i292894.trc
ORA-07445: exception encountered: core dump [kcbs_dump_adv_state()+634] [SIGSEGV] [ADDR:0x0] [PC:0x546B040] [SI_KERNEL(general_protection)] []
ORA-00600: internal error code, arguments: [kcbzpbuf_1], [4], [1], [], [], [], [], [], [], [], [], []

Did you actually read the alert-log ??
The problem is clear in there. Your datafiles are corrupted!!!
While the database is trying to correct these, a lot of ORA-00600 and ORA-07445's are generated.
Consult Oracle Support to get this resolved
Thanks
FJFranken

End of communication channel while running proc

Hi ,
As soon as i run a proc i get the following error
BEGIN cdw_load.pa_cdw_gi_extract.pr_cdw_gi_usr_rep_extract('PL'); END;
ERROR at line 1:
ORA-03113: end-of-file on communication channel
Process ID: 31568
Session ID: 963 Serial number: 693
THE OTHER STATEMENTS /PROGRAMS in the same data base run fine.
i checked the oracle directories are present.
Please help
procedure is below
procedure pr_cdw_gi_usr_rep_extract(i_cntry_cd in varchar2)
as
-- Procedure PR_GI_USR_REP_EXTRACT is created to extract data for user rep extract.
-- Modification History - None
-- Additional Procedure included and Purpose
-- PR_LOG_ERROR is added to handle the exceptions.
v_file utl_file.file_type;
v_file_name varchar2 (50);
v_file_rec nvarchar2 (32767);
va_strng nvarchar2 (200);
v_errcode varchar2 (30);
v_errmessage varchar2 (300);
v_cntry_cd codi.dim_mrkt.cntry_cd%type;
v_message hz_metadata.hz_job_log_detail.processor_message%type;
v_job_seq_id pls_integer := 0;
v_slct_cnt pls_integer := 0;
v_mrkt_id number := 0;
v_rec_cnt number := 0;
v_prev_3rd_cmpgn number := 0; -- Limit the search on frp table to a max of 3 campaigns
v_prev_2nd_cmpgn number := 0; -- LObtain the campaign previous campaign
v_cmpgn_perd_id number := 0; -- Obtain the latest available camapign from frp ..
--cursor for extracting the data for usr_rep
-- Note: The search campaigns (3 camapigns) were used in an inlist as partition pruning was not happenning with BETEEEN clause
cursor ext_usr_rep
is
select 1 from dual ;
-- procedure for logging the errors during exception handling
procedure log_error(v_message varchar2)
as
begin
hz_metadata.pa_log_gsl.end_logging ('ABORT');
hz_metadata.pa_log_gsl.log_error (p_entity_value => 'N/A',
p_app_message => v_message,
p_system_message => sqlerrm,
p_reprocess_ind => null,
p_continue_on_error => 'Y'
commit;
dbms_output.put_line ('Usr Rep - Extract not generated');
end log_error;
-- end of the log_error procedure
-------main begin ----------------------------
begin
v_cntry_cd := upper(i_cntry_cd);
v_message := 'Capture the market id';
select distinct mrkt_id
into v_mrkt_id
from codi.dim_mrkt
where cntry_cd = v_cntry_cd;
**v_file_name := 'OMSRPT_'||v_cntry_cd ||'_USR_REP.TXT';**
v_message := 'Logging details in to JOB LOG table';
pa_generic.lcl_init_logging (p_module_nm => 'Extracting data for User representatives',
p_program_nm => 'PR_GI_USR_REP_EXTRACT',
p_entity_nm => v_file_name,
p_job_nm => 'EXTRACT - DATA FOR USER REPRESENTATIVES',
p_job_log_id => pa_generic.g_job_seq_id,
p_cntry_cd => v_cntry_cd
commit;
execute immediate 'alter session set global_names=false';
-- Fetch the start and end camapigns for limiting the search on fact_rep_prfrmnc
select nvl(max(fld_sls_cmpgn_perd_id), 20040301) into v_cmpgn_perd_id from cdw.sum_mrkt_acct_sls where mrkt_id = v_mrkt_id ;
-- Fetch the 3rd previous campaign
v_prev_3rd_cmpgn := pa_generic.fn_get_past_cmpgn(v_mrkt_id,v_cmpgn_perd_id,3) ;
-- Fetch the 2nd previous campaign
v_prev_2nd_cmpgn := pa_generic.fn_get_past_cmpgn(v_mrkt_id,v_cmpgn_perd_id,2) ;
v_message := 'Opening the file';
v_file := utl_file.fopen_nchar ('CDW_GI_EXTRACT_' || v_cntry_cd || '_DIR', v_file_name, 'W', 32000);
--loop and fetch the cursor ext_usr_rep1
v_message := 'Opening Cursor ';
for ext_usr_reprec in ext_usr_rep
loop
va_strng := ext_usr_reprec.cur_fet;
utl_file.put_line_nchar (v_file, va_strng);
v_slct_cnt := v_slct_cnt + 1;
end loop;
v_message := 'Closing the file ';
utl_file.fclose (v_file);
v_message := 'Log the successful completion message';
hz_metadata.pa_log_gsl.end_logging ('SUCCESS');
v_message := 'Update the stats';
hz_metadata.pa_log_gsl.log_count (p_app_message => 'DATABASE OPERATION STATISTICS',
p_insert_count => 0,
p_update_count => 0,
p_select_count => v_slct_cnt,
p_error_count => 0
exception
when utl_file.invalid_path
then
log_error (v_message || ' due to invalid path');
raise;
when utl_file.invalid_mode
then
log_error (v_message || ' due to invalid mode');
raise;
when utl_file.invalid_operation
then
log_error (v_message || ' due to invalid operation');
raise;
when utl_file.write_error
then
log_error (v_message || ' due to write error');
raise;
when utl_file.internal_error
then
log_error (v_message || ' due to internal error');
raise;
when utl_file.invalid_filehandle
then
log_error (v_message || ' due to invalid file');
raise;
when no_data_found
then
log_error (v_message || ' due to no data');
raise;
when too_many_rows
then
log_error (v_message || ' due to more rows');
raise;
when others
then
log_error (v_message);
raise;
end pr_cdw_gi_usr_rep_extract;

ORA-3113 may be caused also (or should I say mostly ?) by Oracle bugs: you need to check your database instance alert log for ORA-07445 or ORA-00600 error message and for related trace file:
oerr ora 3113
03113, 00000, "end-of-file on communication channel"
// *Cause: The connection between Client and Server process was broken.
// *Action: There was a communication error that requires further investigation.
//          First, check for network problems and review the SQL*Net setup.
//          Also, look in the alert.log file for any errors. Finally, test to
//          see whether the server process is dead and whether a trace file
//          was generated at failure time.

Communication channel alerts

Similar Messages

Maybe you are looking for