Communication channel Attributes non trasportable
Hi,
Some attributes of CC are non transportable during the transportation of Configuration objects. Can I have any list or doccument one have which attributes are trasportable and which were not ? needed for FILE, JDBC, HTTP, IDOC, RFC.
Thanks in advance
Regards
Mahesh.
Hi Mahesh,
You can see some hints from below:
from SAP Help:
Note the following for communication channels: To avoid messages being sent from a productive system to systems in the test landscape, the Integration Builder only exports a selection of attributes. Therefore, address data (host, port) and access data (user, password) are not contained in the export. In the adapter metadata in the Integration Repository, such attributes are flagged as not transportable (they depend on the adapter type and are fixed). Once new objects have been imported, you must add the non-transportable attributes in the target system. These additions are retained in any further import of the object.
Url:
http://help.sap.com/saphelp_nw70/helpdata/en/93/a3a74046033913e10000000a155106/content.htm
Regards, Moorthy
Similar Messages
-
Editing Communication Channel Attributes
Hi All,
I have the following scenario.
I would like to have dynamic Source/Target directories in Dev / QA / Prod using a combination of a variable(from a Z-table), System ID and Connection party
e.g Source File Directory would be "/INTERFACES/PRD/3RDPARTY" in Prod but "/INTERFACES/DEV/3RDPARTY" in Development
I understand I can manipulate the Integration Builder API to update these field but I want to do it using an ABAP proxy/RFC. i.e code in ABAP not java. Can somebody point me in the right direction or some sample code that I can have a look at.
I have seen this done before on a previous project but I did no manage to obtain any source code to look through or the steps invovled.
Any help would be appreciatedHi Raghu,
I have to disagree with you as I have seen it with my own eyes. On a previous project we executed ABAP programs which called Webservices with changed Source File directories on communication channels based on Z-table configuration in the respective systems. The problem is I cannot contact the programmer and am no longer at the client site to look at the code. I would like anyone who has experience in this to assist me or to possible where to start.
Cheers -
Non-EDI messages via AS2 Communication Channel
Hi,
We have many EDI interfaces running via AS2 communication channel provided by Seeburger.
I was wondering whether AS2 should only be used for EDI message or any other normal XML formats also.
If AS2 can be used for other formats also, what is the difference then sending the request via AS2 rather than HTTP.
Since AS2 is using HTTP transport protocol, I could rather use HTTP communication channel itself.
Let me know the differences please!I was wondering whether AS2 should only be used for EDI message or any other normal XML formats also.
As far as I know, it is not restricted, I used AS2 protocol to transfer flat files in my last project
If AS2 can be used for other formats also, what is the difference then sending the request via AS2 rather than HTTP.
AS2 has more features than plain HTTP, like support MDN message, which allow sender to know the status of receipt immediatly.
AS2 can be used as Aync or Sync.
It can keep file name which is useful in some integration with financial institutes.
Receipts of the file can not deny their receipts of the messages (NonRupdiation)
Since AS2 is using HTTP transport protocol, I could rather use HTTP communication channel itself
Yes, you could, but you might loss the feature that AS2 protocol provides, and some trading partner only ask for AS2 protocol for the transmission of the files.
Regards
Liang -
How to resolve conflict in ID Communication channel
Hi Experts ,
I am getting conflict while importing a communication channel in QA . Basically we have done a change in Interface determiantion in dev system to get this change refelcted iin QA instead of transporting only interface determination whole config scenario has been transported . Transport got imported succesfully but while activating the change list it failed and shown conflict in Communication channel . Now If in Object tab I select SELECTDSPLAYED VERSION then geeting error merge relation is null if selecting the displayed version then changelist get rejected .in that case it works now but in future also I will not able to make any change in the communication channel and whenever I make change and try to activate it it shows the same version conflict issue .
KIndly help me with your inputs in this regard as sooner or later these transport will be moved to production and I want to keep myself prepared before it goes to production.
Regards,
SaurabhHi Saurabh Sharma,
Sorry for missing out that, this issue is with ID (Integration Directory)
I think this has gone wrong in your case. Only interface determination has been changed, but, you have imported whole configuration scenario (along with communication channels).
SAP help [Link|http://help.sap.com/saphelp_nwpi711/helpdata/en/39/f3103e02db137de10000000a114084/frameset.htm ] . Note the following for communication channels: To avoid messages being sent from a productive system to systems in the test landscape, the Integration Builder only exports a selection of attributes. Therefore, address data (host, port) and access data (user, password) are not contained in the export. In the adapter metadata in the ES Repository, such attributes are flagged as not transportable (they depend on the adapter type and are fixed). Once new objects have been imported, you must add the non-transportable attributes in the target system. These additions are retained in any further import of the object.
FYI. Unlike when importing in the ES Repository, when importing objects to a directory, version management always creates a new version for the objects.
Solution, as you are not able to activate objects in ID (Integration Directory) due to error message, reject them. Export only Interface determination and import it in QA system.
Regards,
Raghu_Vamsee -
Convrtd to Invterval Part- ORA-03113: end-of-file on communication channel
Hi all,
I had a table as Interval Partitioned. In order to create XML- Xpath indexes on it, I converted it to Range Partitioned table.
I am able to create the XPATH indexes but I get the error: ORA-03113: end-of-file on communication channel
- When I revert the code to Interval Partitioned without the XMLIndex, it works fine(although takes time as no XML Index)
- When I convert table to non partitioned table, create the XML Index, it works fine.
But I need the partitons, so when I create the partitioned table I get the error.
CREATE TABLE INT_PART_TABLE
DB_ID VARCHAR2(10 BYTE),
xML_mESSAGE SYS.XMLTYPE,
LOAD_TIMESTAMP TIMESTAMP(6)
XMLTYPE xML_mESSAGE STORE AS BINARY XML
PARTITION BY RANGE (LOAD_TIMESTAMP)
PARTITION MAX VALUES LESS THAN (TIMESTAMP' 2013-06-01 00:00:00')
TABLESPACE CSTR_STG_DATA
NOCOMPRESS
NOCACHE
ENABLE ROW MOVEMENT;
BEGIN
DBMS_XMLINDEX.dropparameter('Indx_Par');
END;
BEGIN
DBMS_XMLINDEX.REGISTERPARAMETER(
'Indx_Par',
'PATH TABLE Table1
PATHS (INCLUDE ( /abc:field1/xyz:field2
/abc:field1/def:field2
NAMESPACE MAPPING ( xmlns:abc="ABCD"
xmlns:def="DEFG"
xmlns:xyz="XYZA"
end;
create index INDX_XPATHS on "INT_PART_TABLE" (XML_MESSAGE) indextype is xdb.xmlindex
parameters ('PARAM Indx_Par') local;
Now if I execute the following statement in
SELECT T.xML_mESSAGE
FROM INT_PART_TABLE1 T
WHERE XMLEXISTS (
declare namespace abc="ABCD";
declare namespacedef="DEFG";
declare namespace xyz="XYZA";
let $tt as xs:boolean := fn:exists($p/main/id = ("144283","9085802")])
return if ($tt) then true()
else ()'
PASSING T.xML_mESSAGE AS "p");
- Is there any other way of writing this Select statement, which may work?
- Any other thing I need to take care of when defining the table and partitions script so that I don't get this error?Hi,
I think it's time you give a clear (and working) test case so that we can safely try to reproduce the issue.
What you've given so far has syntax error and name mismatch.
So please :
- database version (SELECT * FROM v$version)
- complete sequence of DLLs
- some sample XML documents (it doesn't have to be the real ones, but at least something realistic)
Thanks in advance.
declare namespace abc="ABCD";
declare namespacedef="DEFG";
declare namespace xyz="XYZA";
let $tt as xs:boolean := fn:exists($p/main/id = ("144283","9085802")])
return if ($tt) then true()
else ()'Why all that stuff? You don't have to return a boolean.
The following works for me on 11.2.0.3 :
SQL> CREATE TABLE int_part_table (
2 db_id VARCHAR2(10)
3 , xml_message XMLTYPE
4 , load_timestamp TIMESTAMP
5 )
6 XMLTYPE xml_message STORE AS BINARY XML
7 PARTITION BY RANGE (load_timestamp) (
8 PARTITION MAX VALUES LESS THAN (timestamp '2013-06-01 00:00:00')
9 )
10 NOCOMPRESS
11 NOCACHE
12 ENABLE ROW MOVEMENT;
Table created
SQL> insert into int_part_table values (1, xmltype('<main><id>144283</id></main>'), sysdate);
1 row inserted
SQL> insert into int_part_table values (1, xmltype('<main><id>9085802</id></main>'), sysdate);
1 row inserted
SQL> insert into int_part_table values (1, xmltype('<main><id>1</id></main>'), sysdate);
1 row inserted
SQL> commit;
Commit complete
SQL> create index int_part_table_uix on int_part_table (xml_message)
2 indextype is xdb.xmlindex
3 parameters (
4 'PATH TABLE INT_PART_TABLE_PT
5 PATHS ( INCLUDE ( /main/id ) )')
6 local;
Index created
SQL> SELECT xml_message
2 FROM int_part_table
3 WHERE XMLExists(
4 '/main[id=("144283","9085802")]'
5 PASSING xml_message
6 )
7 ;
XML_MESSAGE
<main>
<id>144283</id>
</main>
<main>
<id>9085802</id>
</main>
Execution Plan
Plan hash value: 3517234298
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time | Pstart| Pstop |
| 0 | SELECT STATEMENT | | 1 | 155 | 34 (6)| 00:00:01 | | |
| 1 | NESTED LOOPS | | 1 | 155 | 34 (6)| 00:00:01 | | |
| 2 | VIEW | VW_SQ_1 | 1 | 25 | 32 (4)| 00:00:01 | | |
| 3 | HASH UNIQUE | | 1 | 47 | | | | |
|* 4 | HASH JOIN SEMI | | 1 | 47 | 32 (4)| 00:00:01 | | |
| 5 | PARTITION SYSTEM SINGLE | | 2 | 90 | 2 (0)| 00:00:01 | 1 | 1 |
|* 6 | TABLE ACCESS BY LOCAL INDEX ROWID| INT_PART_TABLE_PT | 2 | 90 | 2 (0)| 00:00:01 | 1 | 1 |
|* 7 | INDEX SKIP SCAN | SYS117585_INT_PART__PIKEY_IX | 3 | | 1 (0)| 00:00:01 | 1 | 1 |
| 8 | COLLECTION ITERATOR PICKLER FETCH | XQSEQUENCEFROMXMLTYPE | 8168 | 16336 | 29 (0)| 00:00:01 | | |
|* 9 | TABLE ACCESS BY USER ROWID | INT_PART_TABLE | 1 | 130 | 1 (0)| 00:00:01 | ROWID | ROWID |
Predicate Information (identified by operation id):
4 - access("SYS_P3"."VALUE"=SYS_XQ_UPKXML2SQL(VALUE(KOKBF$),2,1,0) AND
SUBSTRB("VALUE",1,1599)=SUBSTRB(SYS_XQ_UPKXML2SQL(VALUE(KOKBF$),2,1,0),1,1599))
6 - filter(SYS_XMLI_LOC_ISNODE("SYS_P3"."LOCATOR")=1)
7 - access("SYS_P3"."PATHID"=HEXTORAW('704E') )
filter("SYS_P3"."PATHID"=HEXTORAW('704E') )
9 - filter("ITEM_6"=TBL$OR$IDX$PART$NUM("DEV"."INT_PART_TABLE",0,7,65535,"INT_PART_TABLE".ROWID))
Note
- Unoptimized XML construct detected (enable XMLOptimizationCheck for more information)
SQL> SELECT xml_message
2 FROM int_part_table
3 WHERE XMLExists(
4 '/main[id="144283" or id="9085802"]'
5 PASSING xml_message
6 )
7 ;
XML_MESSAGE
<main>
<id>144283</id>
</main>
<main>
<id>9085802</id>
</main>
Execution Plan
Plan hash value: 3748936130
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time | Pstart| Pstop |
| 0 | SELECT STATEMENT | | 1 | 155 | 11 (10)| 00:00:01 | | |
| 1 | NESTED LOOPS | | 1 | 155 | 11 (10)| 00:00:01 | | |
| 2 | VIEW | VW_SQ_1 | 2 | 50 | 8 (0)| 00:00:01 | | |
| 3 | HASH UNIQUE | | 2 | 180 | | | | |
| 4 | CONCATENATION | | | | | | | |
| 5 | NESTED LOOPS | | | | | | | |
| 6 | NESTED LOOPS | | 1 | 90 | 4 (0)| 00:00:01 | | |
| 7 | PARTITION SYSTEM SINGLE | | 1 | 45 | 2 (0)| 00:00:01 | 1 | 1 |
|* 8 | TABLE ACCESS BY LOCAL INDEX ROWID| INT_PART_TABLE_PT | 1 | 45 | 2 (0)| 00:00:01 | 1 | 1 |
|* 9 | INDEX SKIP SCAN | SYS117585_INT_PART__PIKEY_IX | 3 | | 1 (0)| 00:00:01 | 1 | 1 |
| 10 | PARTITION SYSTEM SINGLE | | 1 | | 1 (0)| 00:00:01 | 1 | 1 |
|* 11 | INDEX RANGE SCAN | SYS117585_INT_PART__PIKEY_IX | 1 | | 1 (0)| 00:00:01 | 1 | 1 |
|* 12 | TABLE ACCESS BY LOCAL INDEX ROWID | INT_PART_TABLE_PT | 1 | 45 | 2 (0)| 00:00:01 | 1 | 1 |
| 13 | NESTED LOOPS | | | | | | | |
| 14 | NESTED LOOPS | | 1 | 90 | 4 (0)| 00:00:01 | | |
| 15 | PARTITION SYSTEM SINGLE | | 1 | 45 | 2 (0)| 00:00:01 | 1 | 1 |
|* 16 | TABLE ACCESS BY LOCAL INDEX ROWID| INT_PART_TABLE_PT | 1 | 45 | 2 (0)| 00:00:01 | 1 | 1 |
|* 17 | INDEX SKIP SCAN | SYS117585_INT_PART__PIKEY_IX | 3 | | 1 (0)| 00:00:01 | 1 | 1 |
| 18 | PARTITION SYSTEM SINGLE | | 1 | | 1 (0)| 00:00:01 | 1 | 1 |
|* 19 | INDEX RANGE SCAN | SYS117585_INT_PART__PIKEY_IX | 1 | | 1 (0)| 00:00:01 | 1 | 1 |
|* 20 | TABLE ACCESS BY LOCAL INDEX ROWID | INT_PART_TABLE_PT | 1 | 45 | 2 (0)| 00:00:01 | 1 | 1 |
|* 21 | TABLE ACCESS BY USER ROWID | INT_PART_TABLE | 1 | 130 | 1 (0)| 00:00:01 | ROWID | ROWID |
Predicate Information (identified by operation id):
8 - filter("SYS_P5"."VALUE"='9085802' AND SYS_XMLI_LOC_ISNODE("SYS_P5"."LOCATOR")=1 AND SUBSTRB("VALUE",1,1599)='9085802')
9 - access("SYS_P5"."PATHID"=HEXTORAW('704E') )
filter("SYS_P5"."PATHID"=HEXTORAW('704E') )
11 - access("SYS_P5"."RID"="SYS_P3"."RID" AND "SYS_P3"."PATHID"=HEXTORAW('0BBD') AND
"SYS_P3"."ORDER_KEY"<"SYS_P5"."ORDER_KEY")
filter(SYS_ORDERKEY_DEPTH("SYS_P3"."ORDER_KEY")+1=SYS_ORDERKEY_DEPTH("SYS_P5"."ORDER_KEY") AND
TBL$OR$IDX$PART$NUM("DEV"."INT_PART_TABLE",0,7,65535,"SYS_P3"."RID")=TBL$OR$IDX$PART$NUM("DEV"."INT_PART_TABLE_PT",0,7,65535,ROWI
D) AND "SYS_P5"."ORDER_KEY"<SYS_ORDERKEY_MAXCHILD("SYS_P3"."ORDER_KEY"))
12 - filter(SYS_XMLI_LOC_ISNODE("SYS_P3"."LOCATOR")=1)
16 - filter("SYS_P5"."VALUE"='144283' AND SYS_XMLI_LOC_ISNODE("SYS_P5"."LOCATOR")=1 AND SUBSTRB("VALUE",1,1599)='144283' AND
(LNNVL("SYS_P5"."VALUE"='9085802') OR LNNVL("SYS_P5"."PATHID"=HEXTORAW('704E') ) OR
LNNVL(SYS_XMLI_LOC_ISNODE("SYS_P5"."LOCATOR")=1) OR LNNVL(SUBSTRB("VALUE",1,1599)='9085802')))
17 - access("SYS_P5"."PATHID"=HEXTORAW('704E') )
filter("SYS_P5"."PATHID"=HEXTORAW('704E') )
19 - access("SYS_P5"."RID"="SYS_P3"."RID" AND "SYS_P3"."PATHID"=HEXTORAW('0BBD') AND
"SYS_P3"."ORDER_KEY"<"SYS_P5"."ORDER_KEY")
filter(SYS_ORDERKEY_DEPTH("SYS_P3"."ORDER_KEY")+1=SYS_ORDERKEY_DEPTH("SYS_P5"."ORDER_KEY") AND
TBL$OR$IDX$PART$NUM("DEV"."INT_PART_TABLE",0,7,65535,"SYS_P3"."RID")=TBL$OR$IDX$PART$NUM("DEV"."INT_PART_TABLE_PT",0,7,65535,ROWI
D) AND "SYS_P5"."ORDER_KEY"<SYS_ORDERKEY_MAXCHILD("SYS_P3"."ORDER_KEY"))
20 - filter(SYS_XMLI_LOC_ISNODE("SYS_P3"."LOCATOR")=1)
21 - filter("ITEM_2"=TBL$OR$IDX$PART$NUM("DEV"."INT_PART_TABLE",0,7,65535,"INT_PART_TABLE".ROWID))I asked in one of your other threads if /main/id was unique per XML document.
If so, you can use a simple function-based index instead of the XMLIndex :
SQL> drop index int_part_table_uix;
Index dropped.
SQL> create index int_part_table_ix1 on int_part_table (
2 xmlcast(
3 xmlquery('/main/id' passing XML_MESSAGE returning content)
4 as varchar2(10)
5 )
6 );
Index created.
SQL> SELECT xml_message
2 FROM int_part_table
3 WHERE XMLCast(
4 XMLQuery('/main/id' PASSING xml_message RETURNING CONTENT)
5 AS VARCHAR2(10)
6 )
7 IN ('144283', '9085802');
XML_MESSAGE
<main>
<id>144283</id>
</main>
<main>
<id>9085802</id>
</main>
Execution Plan
Plan hash value: 2864653096
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time | Pstart| Pstop |
| 0 | SELECT STATEMENT | | 2 | 236 | 2 (0)| 00:00:01 | | |
| 1 | INLIST ITERATOR | | | | | | | |
| 2 | TABLE ACCESS BY GLOBAL INDEX ROWID| INT_PART_TABLE | 2 | 236 | 2 (0)| 00:00:01 | 1 | 1 |
|* 3 | INDEX RANGE SCAN | INT_PART_TABLE_IX1 | 2 | | 1 (0)| 00:00:01 | | |
Predicate Information (identified by operation id):
3 - access(CAST(EXTRACTVALUE(SYS_MAKEXML(0,"SYS_NC00003$"),'/main/id',null,0,0,524293,1073874944) AS
varchar2(10) )='144283' OR CAST(EXTRACTVALUE(SYS_MAKEXML(0,"SYS_NC00003$"),'/main/id',null,0,0,524293,1073874944
) AS varchar2(10) )='9085802') -
ORA-03113: end-of-file on communication channel
Hi
While I startup Oracle database, i get the following error. What could be the issue and how to resolve this.
SQL> startup
ORACLE instance started.
Total System Global Area 864333824 bytes
Fixed Size 2231368 bytes
Variable Size 704644024 bytes
Database Buffers 150994944 bytes
Redo Buffers 6463488 bytes
Database mounted.
ORA-03113: end-of-file on communication channel
Process ID: 6507
Session ID: 580 Serial number: 5
Below is the content from alert log and trace log
*#alert_orcl.log#*
Bad header found during crash/instance recovery
Reading datafile '+DATA/orcl/datafile/sysaux.257.762570243' for corruption at rdba: 0x0080f01b (file 2, block 61467)
Data in bad block:
type: 255 format: 2 rdba: 0x0000a2ff
last change scn: 0x0000.0080019f seq: 0x0 flg: 0x00
spare1: 0x0 spare2: 0x0 spare3: 0x4ff
consistency value in tail: 0x643e0346
check value in block header: 0x0
Read datafile mirror 'ASM5' (file 2, block 61467) found same corrupt data (no logical check)
block checksum disabled
Reading datafile '+DATA/orcl/datafile/sysaux.257.762570243' for corruption at rdba: 0x0080019f (file 2, block 415)
Read datafile mirror 'ASM4' (file 2, block 415) found same corrupt data (no logical check)
Read datafile mirror 'ASM1' (file 2, block 61467) found same corrupt data (no logical check)
Hex dump of (file 2, block 34539) in trace file /appl/oracle/diag/rdbms/orcl/orcl/trace/orcl_p000_6831.trc
Corrupt block relative dba: 0x008086eb (file 2, block 34539)
Bad header found during crash/instance recovery
Data in bad block:
type: 1 format: 6 rdba: 0x0000a201
last change scn: 0x0000.008086eb seq: 0x0 flg: 0x00
Read datafile mirror 'ASM3' (file 2, block 415) found same corrupt data (no logical check)
spare1: 0xbb spare2: 0xe1 spare3: 0x4ff
consistency value in tail: 0x02c20304
check value in block header: 0x0
block checksum disabled
Reading datafile '+DATA/orcl/datafile/sysaux.257.762570243' for corruption at rdba: 0x008086eb (file 2, block 34539)
Read datafile mirror 'ASM2' (file 2, block 34539) found same corrupt data (no logical check)
Hex dump of (file 2, block 420) in trace file /appl/oracle/diag/rdbms/orcl/orcl/trace/orcl_p002_6839.trc
Corrupt block relative dba: 0x008001a4 (file 2, block 420)
Bad header found during crash/instance recovery
Data in bad block:
type: 255 format: 2 rdba: 0x0000a206
last change scn: 0xe1f3.008001a4 seq: 0x74 flg: 0x00
spare1: 0x0 spare2: 0x0 spare3: 0x401
consistency value in tail: 0x474f4c20
check value in block header: 0x0
block checksum disabled
Reading datafile '+DATA/orcl/datafile/sysaux.257.762570243' for corruption at rdba: 0x008001a4 (file 2, block 420)
Read datafile mirror 'ASM4' (file 2, block 420) found same corrupt data (no logical check)
Read datafile mirror 'ASM1' (file 2, block 34539) found same corrupt data (no logical check)
Read datafile mirror 'ASM3' (file 2, block 420) found same corrupt data (no logical check)
Hex dump of (file 1, block 3097) in trace file /appl/oracle/diag/rdbms/orcl/orcl/trace/orcl_p002_6839.trc
Corrupt block relative dba: 0x00400c19 (file 1, block 3097)
Bad header found during crash/instance recovery
Data in bad block:
type: 2 format: 6 rdba: 0x0000a202
last change scn: 0x0000.00400c19 seq: 0x0 flg: 0x00
spare1: 0xdf spare2: 0xe2 spare3: 0x4ff
consistency value in tail: 0x09c10280
check value in block header: 0x0
Hex dump of (file 2, block 34765) in trace file /appl/oracle/diag/rdbms/orcl/orcl/trace/orcl_p000_6831.trc block checksum disabled
Corrupt block relative dba: 0x008087cd (file 2, block 34765)
Reading datafile '+DATA/orcl/datafile/system.256.762570243' for corruption at rdba: 0x00400c19 (file 1, block 3097)
Bad header found during crash/instance recovery
Data in bad block:
type: 255 format: 1 rdba: 0x0000a206
last change scn: 0xe27b.008087cd seq: 0x74 flg: 0x00
spare1: 0x0 spare2: 0x0 spare3: 0x401
Read datafile mirror 'ASM5' (file 1, block 3097) found same corrupt data (no logical check)
consistency value in tail: 0x00000000
check value in block header: 0x0
block checksum disabled
Reading datafile '+DATA/orcl/datafile/sysaux.257.762570243' for corruption at rdba: 0x008087cd (file 2, block 34765)
Read datafile mirror 'ASM3' (file 2, block 34765) found same corrupt data (no logical check)
Read datafile mirror 'ASM2' (file 1, block 3097) found same corrupt data (no logical check)
Hex dump of (file 3, block 272) in trace file /appl/oracle/diag/rdbms/orcl/orcl/trace/orcl_p002_6839.trc
Reading datafile '+DATA/orcl/datafile/undotbs1.258.762570243' for corruption at rdba: 0x00c00110 (file 3, block 272)
Read datafile mirror 'ASM1' (file 3, block 272) found same corrupt data (logically corrupt)
Read datafile mirror 'ASM5' (file 2, block 34765) found same corrupt data (no logical check)
Hex dump of (file 2, block 34771) in trace file /appl/oracle/diag/rdbms/orcl/orcl/trace/orcl_p000_6831.trc
Corrupt block relative dba: 0x008087d3 (file 2, block 34771)
Bad header found during crash/instance recovery
Data in bad block:
type: 1 format: 6 rdba: 0x0000a201
last change scn: 0x0000.008087d3 seq: 0x0 flg: 0x00
spare1: 0x3a spare2: 0xe3 spare3: 0x4ff
consistency value in tail: 0x00045055
check value in block header: 0x0
block checksum disabled
Reading datafile '+DATA/orcl/datafile/sysaux.257.762570243' for corruption at rdba: 0x008087d3 (file 2, block 34771)
Read datafile mirror 'ASM3' (file 2, block 34771) found same corrupt data (no logical check)
Read datafile mirror 'ASM2' (file 3, block 272) found same corrupt data (logically corrupt)
RECOVERY OF THREAD 1 STUCK AT BLOCK 272 OF FILE 3
Read datafile mirror 'ASM5' (file 2, block 34771) found same corrupt data (no logical check)
Wed Jun 27 05:49:55 2012
Hex dump of (file 2, block 65353) in trace file /appl/oracle/diag/rdbms/orcl/orcl/trace/orcl_dbw0_6713.trc
Corrupt block relative dba: 0x0080ff49 (file 2, block 65353)
Bad header found during buffer corrupt after write
Data in bad block:
type: 1 format: 6 rdba: 0x0000a206
last change scn: 0xe2bf.0080ff49 seq: 0x74 flg: 0x00
spare1: 0xf5 spare2: 0xe0 spare3: 0x602
consistency value in tail: 0x00000000
check value in block header: 0x0
block checksum disabled
Reread of rdba: 0x0080ff49 (file 2, block 65353) found different data
Hex dump of (file 2, block 65356) in trace file /appl/oracle/diag/rdbms/orcl/orcl/trace/orcl_dbw0_6713.trc
Corrupt block relative dba: 0x0080ff4c (file 2, block 65356)
Bad header found during buffer corrupt after write
Data in bad block:
type: 2 format: 6 rdba: 0x0000a206
last change scn: 0xe2a7.0080ff4c seq: 0x74 flg: 0x00
spare1: 0xbf spare2: 0xe2 spare3: 0x602
consistency value in tail: 0x00000059
check value in block header: 0x0
block checksum disabled
Reread of rdba: 0x0080ff4c (file 2, block 65356) found different data
Hex dump of (file 2, block 66114) in trace file /appl/oracle/diag/rdbms/orcl/orcl/trace/orcl_dbw0_6713.trc
Corrupt block relative dba: 0x00810242 (file 2, block 66114)
Bad header found during preparing block for write
Data in bad block:
type: 255 format: 1 rdba: 0x0000a206
last change scn: 0xe1bb.00810242 seq: 0x74 flg: 0x00
spare1: 0x0 spare2: 0x0 spare3: 0x401
consistency value in tail: 0x800102c1
check value in block header: 0x0
block checksum disabled
Errors in file /appl/oracle/diag/rdbms/orcl/orcl/trace/orcl_dbw0_6713.trc (incident=292893):
ORA-00600: internal error code, arguments: [kcbzpbuf_1], [4], [1], [], [], [], [], [], [], [], [], []
Incident details in: /appl/oracle/diag/rdbms/orcl/orcl/incident/incdir_292893/orcl_dbw0_6713_i292893.trc
Use ADRCI or Support Workbench to package the incident.
See Note 411.1 at My Oracle Support for error and packaging details.
Exception [type: SIGBUS, Non-existent physical address] [ADDR:0x72BFFFF8] [PC:0x3612E7CAE9, _wordcopy_bwd_dest_aligned()+185] [flags: 0x0, count: 1]
Errors in file /appl/oracle/diag/rdbms/orcl/orcl/trace/orcl_p000_6831.trc (incident=293021):
ORA-07445: exception encountered: core dump [_wordcopy_bwd_dest_aligned()+185] [SIGBUS] [ADDR:0x72BFFFF8] [PC:0x3612E7CAE9] [Non-existent physical address] []
Incident details in: /appl/oracle/diag/rdbms/orcl/orcl/incident/incdir_293021/orcl_p000_6831_i293021.trc
Use ADRCI or Support Workbench to package the incident.
See Note 411.1 at My Oracle Support for error and packaging details.
Exception [type: SIGSEGV, SI_KERNEL(general_protection)] [ADDR:0x0] [PC:0x546B040, kcbs_dump_adv_state()+634] [flags: 0x0, count: 2]
Wed Jun 27 05:49:59 2012
Dumping diagnostic data in directory=[cdmp_20120627054959], requested by (instance=1, osid=6831 (P000)), summary=[incident=293021].
Errors in file /appl/oracle/diag/rdbms/orcl/orcl/trace/orcl_p000_6831.trc (incident=293022):
ORA-07445: exception encountered: core dump [kcbs_dump_adv_state()+634] [SIGSEGV] [ADDR:0x0] [PC:0x546B040] [SI_KERNEL(general_protection)] []
ORA-07445: exception encountered: core dump [_wordcopy_bwd_dest_aligned()+185] [SIGBUS] [ADDR:0x72BFFFF8] [PC:0x3612E7CAE9] [Non-existent physical address] []
Incident details in: /appl/oracle/diag/rdbms/orcl/orcl/incident/incdir_293022/orcl_p000_6831_i293022.trc
Use ADRCI or Support Workbench to package the incident.
See Note 411.1 at My Oracle Support for error and packaging details.
Exception [type: SIGSEGV, SI_KERNEL(general_protection)] [ADDR:0x0] [PC:0x546B040, kcbs_dump_adv_state()+634] [flags: 0x0, count: 1]
Errors in file /appl/oracle/diag/rdbms/orcl/orcl/incident/incdir_293021/orcl_p000_6831_i293021.trc:
ORA-00607: Internal error occurred while making a change to a data block
ORA-00602: internal programming exception
ORA-07445: exception encountered: core dump [kcbs_dump_adv_state()+634] [SIGSEGV] [ADDR:0x0] [PC:0x546B040] [SI_KERNEL(general_protection)] []
ORA-07445: exception encountered: core dump [_wordcopy_bwd_dest_aligned()+185] [SIGBUS] [ADDR:0x72BFFFF8] [PC:0x3612E7CAE9] [Non-existent physical address] []
Errors in file /appl/oracle/diag/rdbms/orcl/orcl/trace/orcl_dbw0_6713.trc (incident=292894):
ORA-07445: exception encountered: core dump [kcbs_dump_adv_state()+634] [SIGSEGV] [ADDR:0x0] [PC:0x546B040] [SI_KERNEL(general_protection)] []
ORA-00600: internal error code, arguments: [kcbzpbuf_1], [4], [1], [], [], [], [], [], [], [], [], []
Incident details in: /appl/oracle/diag/rdbms/orcl/orcl/incident/incdir_292894/orcl_dbw0_6713_i292894.trc
Use ADRCI or Support Workbench to package the incident.
See Note 411.1 at My Oracle Support for error and packaging details.
Dumping diagnostic data in directory=[cdmp_20120627055004], requested by (instance=1, osid=6713 (DBW0)), summary=[incident=292893].
Wed Jun 27 05:50:08 2012
PMON (ospid: 6679): terminating the instance due to error 471
Wed Jun 27 05:50:08 2012
ORA-1092 : opitsk aborting process
Wed Jun 27 05:50:08 2012
License high water mark = 4
Instance terminated by PMON, pid = 6679
USER (ospid: 6860): terminating the instance
Instance terminated by USER, pid = 6860
*#trace logs#*
Corrupt block relative dba: 0x00810242 (file 2, block 66114)
Bad header found during preparing block for write
Data in bad block:
type: 255 format: 1 rdba: 0x0000a206
last change scn: 0xe1bb.00810242 seq: 0x74 flg: 0x00
spare1: 0x0 spare2: 0x0 spare3: 0x401
consistency value in tail: 0x800102c1
check value in block header: 0x0
block checksum disabled
kcra_dump_redo_internal: skipped for critical process
kcbz_try_block_recovery <1, 8454722>: tries=0 max=5 cur=1340797795 last=0
BH (0x7bbe0fc8) file#: 2 rdba: 0x00810242 (2/66114) class: 1 ba: 0x7b8f4000
set: 12 pool: 3 bsz: 8192 bsi: 0 sflg: 2 pwc: 0,0
dbwrid: 0 obj: 68150 objn: -1 tsn: 1 afn: 2 hint: f
hash: [0x912f45b0,0x912f45b0] lru-req: [0x7bbdfdb0,0x90deff60]
lru-flags: on_auxiliary_list
obj-flags: object_write_list
ckptq: [0x7bbfc4c8,0x7bbea0a8] fileq: [NULL] objq: [0x8b251480,0x8b251480] objaq: [0x8b251450,0x7bbe0e88]
st: INST_RCV md: NULL rsop: 0x90d110e0
flags: buffer_dirty being_written block_written_once recovery_resilver
recovery_read_complete
cr pin refcnt: 0 sh pin refcnt: 0
kcra_dump_redo_internal: skipped for critical process
Incident 292893 created, dump file: /appl/oracle/diag/rdbms/orcl/orcl/incident/incdir_292893/orcl_dbw0_6713_i292893.trc
ORA-00600: internal error code, arguments: [kcbzpbuf_1], [4], [1], [], [], [], [], [], [], [], [], []
Incident 292894 created, dump file: /appl/oracle/diag/rdbms/orcl/orcl/incident/incdir_292894/orcl_dbw0_6713_i292894.trc
ORA-07445: exception encountered: core dump [kcbs_dump_adv_state()+634] [SIGSEGV] [ADDR:0x0] [PC:0x546B040] [SI_KERNEL(general_protection)] []
ORA-00600: internal error code, arguments: [kcbzpbuf_1], [4], [1], [], [], [], [], [], [], [], [], []Did you actually read the alert-log ??
The problem is clear in there. Your datafiles are corrupted!!!
While the database is trying to correct these, a lot of ORA-00600 and ORA-07445's are generated.
Consult Oracle Support to get this resolved
Thanks
FJFranken -
End of communication channel while running proc
Hi ,
As soon as i run a proc i get the following error
BEGIN cdw_load.pa_cdw_gi_extract.pr_cdw_gi_usr_rep_extract('PL'); END;
ERROR at line 1:
ORA-03113: end-of-file on communication channel
Process ID: 31568
Session ID: 963 Serial number: 693
THE OTHER STATEMENTS /PROGRAMS in the same data base run fine.
i checked the oracle directories are present.
Please help
procedure is below
procedure pr_cdw_gi_usr_rep_extract(i_cntry_cd in varchar2)
as
-- Procedure PR_GI_USR_REP_EXTRACT is created to extract data for user rep extract.
-- Modification History - None
-- Additional Procedure included and Purpose
-- PR_LOG_ERROR is added to handle the exceptions.
v_file utl_file.file_type;
v_file_name varchar2 (50);
v_file_rec nvarchar2 (32767);
va_strng nvarchar2 (200);
v_errcode varchar2 (30);
v_errmessage varchar2 (300);
v_cntry_cd codi.dim_mrkt.cntry_cd%type;
v_message hz_metadata.hz_job_log_detail.processor_message%type;
v_job_seq_id pls_integer := 0;
v_slct_cnt pls_integer := 0;
v_mrkt_id number := 0;
v_rec_cnt number := 0;
v_prev_3rd_cmpgn number := 0; -- Limit the search on frp table to a max of 3 campaigns
v_prev_2nd_cmpgn number := 0; -- LObtain the campaign previous campaign
v_cmpgn_perd_id number := 0; -- Obtain the latest available camapign from frp ..
--cursor for extracting the data for usr_rep
-- Note: The search campaigns (3 camapigns) were used in an inlist as partition pruning was not happenning with BETEEEN clause
cursor ext_usr_rep
is
select 1 from dual ;
-- procedure for logging the errors during exception handling
procedure log_error(v_message varchar2)
as
begin
hz_metadata.pa_log_gsl.end_logging ('ABORT');
hz_metadata.pa_log_gsl.log_error (p_entity_value => 'N/A',
p_app_message => v_message,
p_system_message => sqlerrm,
p_reprocess_ind => null,
p_continue_on_error => 'Y'
commit;
dbms_output.put_line ('Usr Rep - Extract not generated');
end log_error;
-- end of the log_error procedure
-------main begin ----------------------------
begin
v_cntry_cd := upper(i_cntry_cd);
v_message := 'Capture the market id';
select distinct mrkt_id
into v_mrkt_id
from codi.dim_mrkt
where cntry_cd = v_cntry_cd;
**v_file_name := 'OMSRPT_'||v_cntry_cd ||'_USR_REP.TXT';**
v_message := 'Logging details in to JOB LOG table';
pa_generic.lcl_init_logging (p_module_nm => 'Extracting data for User representatives',
p_program_nm => 'PR_GI_USR_REP_EXTRACT',
p_entity_nm => v_file_name,
p_job_nm => 'EXTRACT - DATA FOR USER REPRESENTATIVES',
p_job_log_id => pa_generic.g_job_seq_id,
p_cntry_cd => v_cntry_cd
commit;
execute immediate 'alter session set global_names=false';
-- Fetch the start and end camapigns for limiting the search on fact_rep_prfrmnc
select nvl(max(fld_sls_cmpgn_perd_id), 20040301) into v_cmpgn_perd_id from cdw.sum_mrkt_acct_sls where mrkt_id = v_mrkt_id ;
-- Fetch the 3rd previous campaign
v_prev_3rd_cmpgn := pa_generic.fn_get_past_cmpgn(v_mrkt_id,v_cmpgn_perd_id,3) ;
-- Fetch the 2nd previous campaign
v_prev_2nd_cmpgn := pa_generic.fn_get_past_cmpgn(v_mrkt_id,v_cmpgn_perd_id,2) ;
v_message := 'Opening the file';
v_file := utl_file.fopen_nchar ('CDW_GI_EXTRACT_' || v_cntry_cd || '_DIR', v_file_name, 'W', 32000);
--loop and fetch the cursor ext_usr_rep1
v_message := 'Opening Cursor ';
for ext_usr_reprec in ext_usr_rep
loop
va_strng := ext_usr_reprec.cur_fet;
utl_file.put_line_nchar (v_file, va_strng);
v_slct_cnt := v_slct_cnt + 1;
end loop;
v_message := 'Closing the file ';
utl_file.fclose (v_file);
v_message := 'Log the successful completion message';
hz_metadata.pa_log_gsl.end_logging ('SUCCESS');
v_message := 'Update the stats';
hz_metadata.pa_log_gsl.log_count (p_app_message => 'DATABASE OPERATION STATISTICS',
p_insert_count => 0,
p_update_count => 0,
p_select_count => v_slct_cnt,
p_error_count => 0
exception
when utl_file.invalid_path
then
log_error (v_message || ' due to invalid path');
raise;
when utl_file.invalid_mode
then
log_error (v_message || ' due to invalid mode');
raise;
when utl_file.invalid_operation
then
log_error (v_message || ' due to invalid operation');
raise;
when utl_file.write_error
then
log_error (v_message || ' due to write error');
raise;
when utl_file.internal_error
then
log_error (v_message || ' due to internal error');
raise;
when utl_file.invalid_filehandle
then
log_error (v_message || ' due to invalid file');
raise;
when no_data_found
then
log_error (v_message || ' due to no data');
raise;
when too_many_rows
then
log_error (v_message || ' due to more rows');
raise;
when others
then
log_error (v_message);
raise;
end pr_cdw_gi_usr_rep_extract;ORA-3113 may be caused also (or should I say mostly ?) by Oracle bugs: you need to check your database instance alert log for ORA-07445 or ORA-00600 error message and for related trace file:
oerr ora 3113
03113, 00000, "end-of-file on communication channel"
// *Cause: The connection between Client and Server process was broken.
// *Action: There was a communication error that requires further investigation.
// First, check for network problems and review the SQL*Net setup.
// Also, look in the alert.log file for any errors. Finally, test to
// see whether the server process is dead and whether a trace file
// was generated at failure time. -
Java.lang.NullPointerException while creating Communication Channel
Dear friends
First of all, I have already looked at many existing postings with java Null Pointer problems and also looked at the links that other users had suggested. It hasn't helped and therefore I am posting this question here.
I am trying to create Communication Channel using Integration Scenario Configurator.
I get to a stage where it gives a java.lang.NullPointerException error + an InternatlError. Here is the log of internal error. However, if i Continue ignoring the error message, it creates two communication channels that I wanted (Sender Soapadapter and Receiver RFC adapter), but the values in these adapters will not be completely filled.
Has anybody seen this problem before. We are using the latest and gratest SAP that is available in the market.
(PLEASE SCROLL DOWN TO SEE THE ERROR MESSAGES)
Thanks
Ram
#17 13:33:42 [AWT-EventQueue-0] FINE AutoLog.created.com.sap.aii.utilxi.swing.framework.FrameworkException: com.sap.aii.utilxi.swing.framework.FrameworkException: Internal problem occurred
at com.sap.aii.utilxi.swing.toolkit.ExceptionDialog.init(ExceptionDialog.java:116)
at com.sap.aii.utilxi.swing.toolkit.ExceptionDialog.<init>(ExceptionDialog.java:93)
at com.sap.aii.utilxi.swing.toolkit.Guitilities.showExceptionDialog(Guitilities.java:1137)
at com.sap.aii.ibdir.gui.scenario.generator.dialogs.CreateChannelAgent$CreateChannelWizardController.processPageEvent(CreateChannelAgent.java:500)
at com.sap.aii.utilxi.swing.framework.wizard.BasicWizard.firePageEvent(BasicWizard.java:64)
at com.sap.aii.utilxi.swing.framework.wizard.BasicWizard.finish(BasicWizard.java:202)
at com.sap.aii.utilxi.swing.framework.wizard.FinishAction.actionPerformed(FinishAction.java:39)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
at java.awt.Component.processMouseEvent(Unknown Source)
at javax.swing.JComponent.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.Dialog$1.run(Unknown Source)
at java.awt.Dialog$3.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Dialog.show(Unknown Source)
at com.sap.aii.utilxi.swing.toolkit.BaseDialog.show(BaseDialog.java:320)
at java.awt.Component.show(Unknown Source)
at java.awt.Component.setVisible(Unknown Source)
at java.awt.Window.setVisible(Unknown Source)
at java.awt.Dialog.setVisible(Unknown Source)
at com.sap.aii.utilxi.swing.framework.wizard.BasicWizardDialog.showDialog(BasicWizardDialog.java:78)
at com.sap.aii.utilxi.swing.framework.wizard.BasicWizardDialog.showDialog(BasicWizardDialog.java:82)
at com.sap.aii.ibdir.gui.scenario.generator.dialogs.CreateChannelAgent$WizardDialog.startWizard(CreateChannelAgent.java:797)
at com.sap.aii.ibdir.gui.scenario.generator.dialogs.CreateChannelAgent$CreateChannelWithTemplateAction.actionPerformed(CreateChannelAgent.java:340)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.AbstractButton.doClick(Unknown Source)
at com.sap.plaf.frog.FrogMenuItemUI$MouseInputHandler.mouseReleased(FrogMenuItemUI.java:833)
at java.awt.Component.processMouseEvent(Unknown Source)
at javax.swing.JComponent.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.Dialog$1.run(Unknown Source)
at java.awt.Dialog$3.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Dialog.show(Unknown Source)
at com.sap.aii.utilxi.swing.toolkit.BaseDialog.show(BaseDialog.java:320)
at java.awt.Component.show(Unknown Source)
at java.awt.Component.setVisible(Unknown Source)
at java.awt.Window.setVisible(Unknown Source)
at java.awt.Dialog.setVisible(Unknown Source)
at com.sap.aii.utilxi.swing.framework.ModalDialog.showDialog(ModalDialog.java:65)
at com.sap.aii.ibdir.gui.scenario.generator.dialogs.ConnectionConfigurator.showDialog(ConnectionConfigurator.java:202)
at com.sap.aii.ibdir.gui.scenario.UsabilityPanel$createConfigurateConnectionListener.mouseClicked(UsabilityPanel.java:238)
at java.awt.AWTEventMulticaster.mouseClicked(Unknown Source)
at java.awt.AWTEventMulticaster.mouseClicked(Unknown Source)
at java.awt.Component.processMouseEvent(Unknown Source)
at javax.swing.JComponent.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
#16 13:33:42 [AWT-EventQueue-0] DEBUG AutoLog.created.com.sap.aii.utilxi.swing.framework.FrameworkException: Internal problem occurred
#15 13:33:41 [AWT-EventQueue-0] FINE AutoLog.created.java.lang.NullPointerException: java.lang.NullPointerException
at com.sap.aii.ib.gui.cpa.generic.GenericGuiHandler.getMetaData(GenericGuiHandler.java:75)
at com.sap.aii.ib.gui.cpa.generic.GenericGuiHandler.getTransportProtocols(GenericGuiHandler.java:166)
at com.sap.aii.ibdir.gui.cpa.ChannelGenerator.getDefaultGenericChannel(ChannelGenerator.java:194)
at com.sap.aii.ibdir.gui.cpa.ChannelGenerator.getDefaultChannel(ChannelGenerator.java:179)
at com.sap.aii.ibdir.gui.scenario.generator.dialogs.CreateChannelAgent$CreateChannelWizardController.processPageEvent(CreateChannelAgent.java:497)
at com.sap.aii.utilxi.swing.framework.wizard.BasicWizard.firePageEvent(BasicWizard.java:64)
at com.sap.aii.utilxi.swing.framework.wizard.BasicWizard.finish(BasicWizard.java:202)
at com.sap.aii.utilxi.swing.framework.wizard.FinishAction.actionPerformed(FinishAction.java:39)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
at java.awt.Component.processMouseEvent(Unknown Source)
at javax.swing.JComponent.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.Dialog$1.run(Unknown Source)
at java.awt.Dialog$3.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Dialog.show(Unknown Source)
at com.sap.aii.utilxi.swing.toolkit.BaseDialog.show(BaseDialog.java:320)
at java.awt.Component.show(Unknown Source)
at java.awt.Component.setVisible(Unknown Source)
at java.awt.Window.setVisible(Unknown Source)
at java.awt.Dialog.setVisible(Unknown Source)
at com.sap.aii.utilxi.swing.framework.wizard.BasicWizardDialog.showDialog(BasicWizardDialog.java:78)
at com.sap.aii.utilxi.swing.framework.wizard.BasicWizardDialog.showDialog(BasicWizardDialog.java:82)
at com.sap.aii.ibdir.gui.scenario.generator.dialogs.CreateChannelAgent$WizardDialog.startWizard(CreateChannelAgent.java:797)
at com.sap.aii.ibdir.gui.scenario.generator.dialogs.CreateChannelAgent$CreateChannelWithTemplateAction.actionPerformed(CreateChannelAgent.java:340)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.AbstractButton.doClick(Unknown Source)
at com.sap.plaf.frog.FrogMenuItemUI$MouseInputHandler.mouseReleased(FrogMenuItemUI.java:833)
at java.awt.Component.processMouseEvent(Unknown Source)
at javax.swing.JComponent.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.Dialog$1.run(Unknown Source)
at java.awt.Dialog$3.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Dialog.show(Unknown Source)
at com.sap.aii.utilxi.swing.toolkit.BaseDialog.show(BaseDialog.java:320)
at java.awt.Component.show(Unknown Source)
at java.awt.Component.setVisible(Unknown Source)
at java.awt.Window.setVisible(Unknown Source)
at java.awt.Dialog.setVisible(Unknown Source)
at com.sap.aii.utilxi.swing.framework.ModalDialog.showDialog(ModalDialog.java:65)
at com.sap.aii.ibdir.gui.scenario.generator.dialogs.ConnectionConfigurator.showDialog(ConnectionConfigurator.java:202)
at com.sap.aii.ibdir.gui.scenario.UsabilityPanel$createConfigurateConnectionListener.mouseClicked(UsabilityPanel.java:238)
at java.awt.AWTEventMulticaster.mouseClicked(Unknown Source)
at java.awt.AWTEventMulticaster.mouseClicked(Unknown Source)
at java.awt.Component.processMouseEvent(Unknown Source)
at javax.swing.JComponent.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
#14 13:33:41 [AWT-EventQueue-0] DEBUG AutoLog.created.java.lang.NullPointerException: null
#13 13:33:41 [AWT-EventQueue-0] ERROR com.sap.aii.utilxi.swing.toolkit.ExceptionDialog: Throwable
Thrown:
java.lang.NullPointerException: null
at com.sap.aii.ib.gui.cpa.generic.GenericGuiHandler.getMetaData(GenericGuiHandler.java:75)
at com.sap.aii.ib.gui.cpa.generic.GenericGuiHandler.getTransportProtocols(GenericGuiHandler.java:166)
at com.sap.aii.ibdir.gui.cpa.ChannelGenerator.getDefaultGenericChannel(ChannelGenerator.java:194)
at com.sap.aii.ibdir.gui.cpa.ChannelGenerator.getDefaultChannel(ChannelGenerator.java:179)
at com.sap.aii.ibdir.gui.scenario.generator.dialogs.CreateChannelAgent$CreateChannelWizardController.processPageEvent(CreateChannelAgent.java:497)
at com.sap.aii.utilxi.swing.framework.wizard.BasicWizard.firePageEvent(BasicWizard.java:64)
at com.sap.aii.utilxi.swing.framework.wizard.BasicWizard.finish(BasicWizard.java:202)
at com.sap.aii.utilxi.swing.framework.wizard.FinishAction.actionPerformed(FinishAction.java:39)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
at java.awt.Component.processMouseEvent(Unknown Source)
at javax.swing.JComponent.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.Dialog$1.run(Unknown Source)
at java.awt.Dialog$3.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Dialog.show(Unknown Source)
at com.sap.aii.utilxi.swing.toolkit.BaseDialog.show(BaseDialog.java:320)
at java.awt.Component.show(Unknown Source)
at java.awt.Component.setVisible(Unknown Source)
at java.awt.Window.setVisible(Unknown Source)
at java.awt.Dialog.setVisible(Unknown Source)
at com.sap.aii.utilxi.swing.framework.wizard.BasicWizardDialog.showDialog(BasicWizardDialog.java:78)
at com.sap.aii.utilxi.swing.framework.wizard.BasicWizardDialog.showDialog(BasicWizardDialog.java:82)
at com.sap.aii.ibdir.gui.scenario.generator.dialogs.CreateChannelAgent$WizardDialog.startWizard(CreateChannelAgent.java:797)
at com.sap.aii.ibdir.gui.scenario.generator.dialogs.CreateChannelAgent$CreateChannelWithTemplateAction.actionPerformed(CreateChannelAgent.java:340)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.AbstractButton.doClick(Unknown Source)
at com.sap.plaf.frog.FrogMenuItemUI$MouseInputHandler.mouseReleased(FrogMenuItemUI.java:833)
at java.awt.Component.processMouseEvent(Unknown Source)
at javax.swing.JComponent.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.Dialog$1.run(Unknown Source)
at java.awt.Dialog$3.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Dialog.show(Unknown Source)
at com.sap.aii.utilxi.swing.toolkit.BaseDialog.show(BaseDialog.java:320)
at java.awt.Component.show(Unknown Source)
at java.awt.Component.setVisible(Unknown Source)
at java.awt.Window.setVisible(Unknown Source)
at java.awt.Dialog.setVisible(Unknown Source)
at com.sap.aii.utilxi.swing.framework.ModalDialog.showDialog(ModalDialog.java:65)
at com.sap.aii.ibdir.gui.scenario.generator.dialogs.ConnectionConfigurator.showDialog(ConnectionConfigurator.java:202)
at com.sap.aii.ibdir.gui.scenario.UsabilityPanel$createConfigurateConnectionListener.mouseClicked(UsabilityPanel.java:238)
at java.awt.AWTEventMulticaster.mouseClicked(Unknown Source)
at java.awt.AWTEventMulticaster.mouseClicked(Unknown Source)
at java.awt.Component.processMouseEvent(Unknown Source)
at javax.swing.JComponent.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
#12 13:32:27 [AWT-EventQueue-0] FINE AutoLog.created.com.sap.aii.utilxi.swing.framework.PersistenceException: com.sap.aii.utilxi.swing.framework.PersistenceException: Object Configuration Scenario IS_CustomerSearch not found
at com.sap.aii.ib.gui.editor.XiDocument.load(XiDocument.java:320)
at com.sap.aii.ib.gui.operations.RevertCommand.reloadDocuments(RevertCommand.java:237)
at com.sap.aii.ib.gui.operations.RevertCommand.execute(RevertCommand.java:190)
at com.sap.aii.utilxi.swing.framework.ExecutionContext.execute(ExecutionContext.java:196)
at com.sap.aii.utilxi.swing.framework.ExecutionContext.executeSafe(ExecutionContext.java:134)
at com.sap.aii.utilxi.swing.framework.CommandAction.actionPerformed(CommandAction.java:69)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.AbstractButton.doClick(Unknown Source)
at com.sap.plaf.frog.FrogMenuItemUI$MouseInputHandler.mouseReleased(FrogMenuItemUI.java:833)
at java.awt.Component.processMouseEvent(Unknown Source)
at javax.swing.JComponent.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
#11 13:32:27 [AWT-EventQueue-0] DEBUG AutoLog.created.com.sap.aii.utilxi.swing.framework.PersistenceException: Object Configuration Scenario IS_CustomerSearch not found
#10 13:32:26 [AWT-EventQueue-0] FINE AutoLog.created.com.sap.aii.utilxi.misc.api.BaseRuntimeException: com.sap.aii.utilxi.misc.api.BaseRuntimeException: Invalid key element attribute id "NAMESPACE". Valid values are: .
at com.sap.aii.ib.bom.gen.XiTypeInformation.validateKeyElementAttributeId(XiTypeInformation.java:890)
at com.sap.aii.ib.bom.gen.XiTypeInformation.getKeyElementIndex(XiTypeInformation.java:905)
at com.sap.aii.ib.bom.gen.XiKey.getPosition(XiKey.java:169)
at com.sap.aii.ib.bom.gen.XiKey.getKeyfield(XiKey.java:162)
at com.sap.aii.ib.bom.gen.XiKey.getNamespace(XiKey.java:157)
at com.sap.aii.ib.bom.docu.InternalDocuServiceDefault.getDocuKey(InternalDocuServiceDefault.java:143)
at com.sap.aii.ib.bom.docu.DocuServiceProvider$DocuServiceImpl.getDocuKey(DocuServiceProvider.java:164)
at com.sap.aii.ib.gui.editor.XiDocument.getDocumentationKey(XiDocument.java:892)
at com.sap.aii.ib.gui.editor.XiDocument.getDocumentationDocument(XiDocument.java:879)
at com.sap.aii.ib.gui.misc.ApplicationBase.getDocumentsForLinks(ApplicationBase.java:327)
at com.sap.aii.ib.gui.operations.RevertCommand.execute(RevertCommand.java:186)
at com.sap.aii.utilxi.swing.framework.ExecutionContext.execute(ExecutionContext.java:196)
at com.sap.aii.utilxi.swing.framework.ExecutionContext.executeSafe(ExecutionContext.java:134)
at com.sap.aii.utilxi.swing.framework.CommandAction.actionPerformed(CommandAction.java:69)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.AbstractButton.doClick(Unknown Source)
at com.sap.plaf.frog.FrogMenuItemUI$MouseInputHandler.mouseReleased(FrogMenuItemUI.java:833)
at java.awt.Component.processMouseEvent(Unknown Source)
at javax.swing.JComponent.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
#9 13:32:26 [AWT-EventQueue-0] DEBUG AutoLog.created.com.sap.aii.utilxi.misc.api.BaseRuntimeException: Invalid key element attribute id "NAMESPACE". Valid values are: .
#8 13:31:54 [AWT-EventQueue-0] ERROR com.sap.aii.utilxi.swing.toolkit.ExceptionDialog: Throwable
Thrown:
MESSAGE ID: com.sap.aii.ib.core.roa.rb_all.ROA_MOA_NOTCOMPLETED
com.sap.aii.utilxi.misc.api.ResourceException: Attempt to access the 1 requested objects on 1 failed. Detailed information:
com.sap.aii.ib.core.roa.RoaObjectAccessException: Unable to read object Adapter Metadata RFC | http://sap.com/xi/XI/System (3b787a80-35c1-11d6-bbe0-efe50a1145a5) of type AdapterMetaData from application REPOSITORY on system REPOSITORY. Detailed information: Software component version with GUID 3b787a80-35c1-11d6-bbe0-efe50a1145a5 does not exist
com.sap.aii.ib.core.roa.RoaObjectAccessException: Unable to read object Adapter Metadata RFC | http://sap.com/xi/XI/System (3b787a80-35c1-11d6-bbe0-efe50a1145a5) of type AdapterMetaData from application REPOSITORY on system REPOSITORY. Detailed information: Software component version with GUID 3b787a80-35c1-11d6-bbe0-efe50a1145a5 does not exist
at com.sap.aii.ib.sbeans.gen.GeneralSessionBean.wrap(GeneralSessionBean.java:156)
at com.sap.aii.ib.sbeans.gen.GeneralSessionBean.wrap(GeneralSessionBean.java:131)
at com.sap.aii.ib.sbeans.misc.MiscServicesBean.getAdapterMetadata(MiscServicesBean.java:242)
at com.sap.aii.ib.sbeans.misc.MiscServicesRemoteObjectImpl10.getAdapterMetadata(MiscServicesRemoteObjectImpl10.java:2028)
at com.sap.aii.ib.sbeans.misc.MiscServicesRemoteObjectImpl10p4_Skel.dispatch(MiscServicesRemoteObjectImpl10p4_Skel.java:285)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320)
at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198)
at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Serialized server exceptions:
MESSAGE ID: com.sap.aii.ib.core.roa.rb_all.ROA_MOA_NOTCOMPLETED (serialized)
com.sap.aii.utilxi.misc.api.ResourceException: Attempt to access the 1 requested objects on 1 failed. Detailed information:
com.sap.aii.ib.core.roa.RoaObjectAccessException: Unable to read object Adapter Metadata RFC | http://sap.com/xi/XI/System (3b787a80-35c1-11d6-bbe0-efe50a1145a5) of type AdapterMetaData from application REPOSITORY on system REPOSITORY. Detailed information: Software component version with GUID 3b787a80-35c1-11d6-bbe0-efe50a1145a5 does not exist
com.sap.aii.ib.core.roa.RoaObjectAccessException: Unable to read object Adapter Metadata RFC | http://sap.com/xi/XI/System (3b787a80-35c1-11d6-bbe0-efe50a1145a5) of type AdapterMetaData from application REPOSITORY on system REPOSITORY. Detailed information: Software component version with GUID 3b787a80-35c1-11d6-bbe0-efe50a1145a5 does not exist
at com.sap.aii.ib.server.cpa.AdapterMDCache.readObject(AdapterMDCache.java:228)
at com.sap.aii.ib.server.cpa.AdapterMDCache.actualize(AdapterMDCache.java:209)
at com.sap.aii.utilxi.misc.api.LRUMapBasedCache.get(LRUMapBasedCache.java:34)
at com.sap.aii.ib.server.cpa.AdapterMDCache.get(AdapterMDCache.java:171)
at com.sap.aii.utilxi.misc.api.Cache.get(Cache.java:40)
at com.sap.aii.utilxi.misc.api.Cache.get(Cache.java:40)
at com.sap.aii.ib.sbeans.misc.MiscServicesBean.getAdapterMetadata(MiscServicesBean.java:238)
at com.sap.aii.ib.sbeans.misc.MiscServicesRemoteObjectImpl10.getAdapterMetadata(MiscServicesRemoteObjectImpl10.java:2028)
at com.sap.aii.ib.sbeans.misc.MiscServicesRemoteObjectImpl10p4_Skel.dispatch(MiscServicesRemoteObjectImpl10p4_Skel.java:285)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320)
at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198)
at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
MESSAGE ID: com.sap.aii.ib.core.roa.rb_all.ROA_MOA_NOTCOMPLETED (serialized)
com.sap.aii.ib.core.roa.RoaMultiObjectAccessException: Attempt to access the 1 requested objects on 1 failed. Detailed information:
com.sap.aii.ib.core.roa.RoaObjectAccessException: Unable to read object Adapter Metadata RFC | http://sap.com/xi/XI/System (3b787a80-35c1-11d6-bbe0-efe50a1145a5) of type AdapterMetaData from application REPOSITORY on system REPOSITORY. Detailed information: Software component version with GUID 3b787a80-35c1-11d6-bbe0-efe50a1145a5 does not exist
com.sap.aii.ib.core.roa.RoaObjectAccessException: Unable to read object Adapter Metadata RFC | http://sap.com/xi/XI/System (3b787a80-35c1-11d6-bbe0-efe50a1145a5) of type AdapterMetaData from application REPOSITORY on system REPOSITORY. Detailed information: Software component version with GUID 3b787a80-35c1-11d6-bbe0-efe50a1145a5 does not exist
at com.sap.aii.ib.core.roa.RoaMultiObjectAccessException.newObjectAccessNotCompleted(RoaMultiObjectAccessException.java:98)
at com.sap.aii.ib.core.roa.RoaServiceImpl.createObjectArrayFromRoaOutput(RoaServiceImpl.java:317)
at com.sap.aii.ib.core.roa.RoaServiceImpl.readObjectsImpl(RoaServiceImpl.java:231)
at com.sap.aii.ib.core.roa.RoaServiceImpl.readObjects(RoaServiceImpl.java:329)
at com.sap.aii.ib.server.cpa.AdapterMDCache.readObject(AdapterMDCache.java:219)
at com.sap.aii.ib.server.cpa.AdapterMDCache.actualize(AdapterMDCache.java:209)
at com.sap.aii.utilxi.misc.api.LRUMapBasedCache.get(LRUMapBasedCache.java:34)
at com.sap.aii.ib.server.cpa.AdapterMDCache.get(AdapterMDCache.java:171)
at com.sap.aii.utilxi.misc.api.Cache.get(Cache.java:40)
at com.sap.aii.utilxi.misc.api.Cache.get(Cache.java:40)
at com.sap.aii.ib.sbeans.misc.MiscServicesBean.getAdapterMetadata(MiscServicesBean.java:238)
at com.sap.aii.ib.sbeans.misc.MiscServicesRemoteObjectImpl10.getAdapterMetadata(MiscServicesRemoteObjectImpl10.java:2028)
at com.sap.aii.ib.sbeans.misc.MiscServicesRemoteObjectImpl10p4_Skel.dispatch(MiscServicesRemoteObjectImpl10p4_Skel.java:285)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320)
at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198)
at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
#7 13:28:46 [AWT-EventQueue-0] FINE AutoLog.created.com.sap.aii.ib.core.service.TypeNotRegisteredException: com.sap.aii.ib.core.service.TypeNotRegisteredException: Type "ConfAsstntHelp" is not registered in the service class Type Service - Type Information
at com.sap.aii.ib.core.service.ServiceBase.getServiceImpl(ServiceBase.java:71)
at com.sap.aii.ib.bom.gen.TypeServiceImpl.getTypeInformation(TypeServiceImpl.java:82)
at com.sap.aii.ib.gui.xiitem.services.InternalXiItemService.getTypeInfo(InternalXiItemService.java:23)
at com.sap.aii.ib.gui.xiitem.services.InternalXiItemService.createEmptyXiItem(InternalXiItemService.java:92)
at com.sap.aii.ib.gui.xiitem.services.XiItemServiceProvider.createEmptyXiItem(XiItemServiceProvider.java:97)
at com.sap.aii.ib.gui.xiitem.services.InternalXiItemServiceBase.<init>(InternalXiItemServiceBase.java:38)
at com.sap.aii.ib.gui.xiitem.services.InternalXiItemServiceBase.<init>(InternalXiItemServiceBase.java:25)
at com.sap.aii.ibdir.gui.xiitem.DirInternalXiItemService$ForConfAssistantHelp.<init>(DirInternalXiItemService.java:607)
at com.sap.aii.ibdir.gui.applcomp.StartupCodeEntry.localStartup(StartupCodeEntry.java:119)
at com.sap.aii.ibdir.gui.applcomp.StartupCodeEntry.startup(StartupCodeEntry.java:73)
at com.sap.aii.ib.core.applcomp.IStartupCodeEntry.startupIfNotAlreadyDone(IStartupCodeEntry.java:33)
at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponentImpl.startup(ExplicitApplicationComponentImpl.java:116)
at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponents.startup(ExplicitApplicationComponents.java:383)
at com.sap.aii.ib.core.applcomp.ApplicationComponent.startup(ApplicationComponent.java:209)
at com.sap.aii.ib.gui.login.SplashLoginFrame$6.run(SplashLoginFrame.java:429)
at java.awt.event.InvocationEvent.dispatch(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
#6 13:28:46 [AWT-EventQueue-0] DEBUG AutoLog.created.com.sap.aii.ib.core.service.TypeNotRegisteredException: Type "ConfAsstntHelp" is not registered in the service class Type Service - Type Information
#5 13:28:46 [AWT-EventQueue-0] FINE AutoLog.created.com.sap.aii.ib.core.service.TypeNotRegisteredException: com.sap.aii.ib.core.service.TypeNotRegisteredException: Type "TypeGroupFolder" is not registered in the service class Type Service - Type Information
at com.sap.aii.ib.core.service.ServiceBase.getServiceImpl(ServiceBase.java:71)
at com.sap.aii.ib.bom.gen.TypeServiceImpl.getTypeInformation(TypeServiceImpl.java:82)
at com.sap.aii.ib.gui.xiitem.services.InternalXiItemService.getTypeInfo(InternalXiItemService.java:23)
at com.sap.aii.ib.gui.xiitem.services.InternalXiItemService.createEmptyXiItem(InternalXiItemService.java:92)
at com.sap.aii.ib.gui.xiitem.services.XiItemServiceProvider.createEmptyXiItem(XiItemServiceProvider.java:97)
at com.sap.aii.ib.gui.xiitem.services.InternalXiItemServiceBase.<init>(InternalXiItemServiceBase.java:38)
at com.sap.aii.ib.gui.xiitem.services.InternalXiItemServiceBase.<init>(InternalXiItemServiceBase.java:25)
at com.sap.aii.ibdir.gui.xiitem.DirInternalXiItemService$ForFolder.<init>(DirInternalXiItemService.java:752)
at com.sap.aii.ibdir.gui.applcomp.StartupCodeEntry.localStartup(StartupCodeEntry.java:113)
at com.sap.aii.ibdir.gui.applcomp.StartupCodeEntry.startup(StartupCodeEntry.java:73)
at com.sap.aii.ib.core.applcomp.IStartupCodeEntry.startupIfNotAlreadyDone(IStartupCodeEntry.java:33)
at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponentImpl.startup(ExplicitApplicationComponentImpl.java:116)
at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponents.startup(ExplicitApplicationComponents.java:383)
at com.sap.aii.ib.core.applcomp.ApplicationComponent.startup(ApplicationComponent.java:209)
at com.sap.aii.ib.gui.login.SplashLoginFrame$6.run(SplashLoginFrame.java:429)
at java.awt.event.InvocationEvent.dispatch(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
#4 13:28:46 [AWT-EventQueue-0] DEBUG AutoLog.created.com.sap.aii.ib.core.service.TypeNotRegisteredException: Type "TypeGroupFolder" is not registered in the service class Type Service - Type Information
#3 13:28:46 [AWT-EventQueue-0] FINE AutoLog.created.com.sap.aii.ib.core.service.TypeNotRegisteredException: com.sap.aii.ib.core.service.TypeNotRegisteredException: Type "TypeConntestObj" is not registered in the service class Type Service - Type Information
at com.sap.aii.ib.core.service.ServiceBase.getServiceImpl(ServiceBase.java:71)
at com.sap.aii.ib.bom.gen.TypeServiceImpl.getTypeInformation(TypeServiceImpl.java:82)
at com.sap.aii.ib.gui.xiitem.services.InternalXiItemService.getTypeInfo(InternalXiItemService.java:23)
at com.sap.aii.ib.gui.xiitem.services.InternalXiItemService.createEmptyXiItem(InternalXiItemService.java:92)
at com.sap.aii.ib.gui.xiitem.services.XiItemServiceProvider.createEmptyXiItem(XiItemServiceProvider.java:97)
at com.sap.aii.ib.gui.xiitem.InternalXiItemServiceForNameNamespaceObjects.addType(InternalXiItemServiceForNameNamespaceObjects.java:68)
at com.sap.aii.ib.gui.xiitem.InternalXiItemServiceForNameNamespaceObjects.<init>(InternalXiItemServiceForNameNamespaceObjects.java:55)
at com.sap.aii.ib.gui.applcomp.StartupCodeEntry.guiStartup(StartupCodeEntry.java:151)
at com.sap.aii.ib.gui.applcomp.StartupCodeEntry.startup(StartupCodeEntry.java:108)
at com.sap.aii.ib.core.applcomp.IStartupCodeEntry.startupIfNotAlreadyDone(IStartupCodeEntry.java:33)
at com.sap.aii.ibdir.gui.applcomp.StartupCodeEntry.startup(StartupCodeEntry.java:52)
at com.sap.aii.ib.core.applcomp.IStartupCodeEntry.startupIfNotAlreadyDone(IStartupCodeEntry.java:33)
at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponentImpl.startup(ExplicitApplicationComponentImpl.java:116)
at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponents.startup(ExplicitApplicationComponents.java:383)
at com.sap.aii.ib.core.applcomp.ApplicationComponent.startup(ApplicationComponent.java:209)
at com.sap.aii.ib.gui.login.SplashLoginFrame$6.run(SplashLoginFrame.java:429)
at java.awt.event.InvocationEvent.dispatch(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
#2 13:28:46 [AWT-EventQueue-0] DEBUG AutoLog.created.com.sap.aii.ib.core.service.TypeNotRegisteredException: Type "TypeConntestObj" is not registered in the service class Type Service - Type Information
#1 13:28:46 [AWT-EventQueue-0] FINE AutoLog.created.com.sap.aii.ib.core.service.TypeNotRegisteredException: com.sap.aii.ib.core.service.TypeNotRegisteredException: Type "versConflList" is not registered in the service class Type Service - Type Information
at com.sap.aii.ib.core.service.ServiceBase.getServiceImpl(ServiceBase.java:71)
at com.sap.aii.ib.bom.gen.TypeServiceImpl.getTypeInformation(TypeServiceImpl.java:82)
at com.sap.aii.ib.gui.xiitem.services.InternalXiItemService.getTypeInfo(InternalXiItemService.java:23)
at com.sap.aii.ib.gui.xiitem.services.InternalXiItemServiceBase.<init>(InternalXiItemServiceBase.java:44)
at com.sap.aii.ib.gui.xiitem.CommonInternalXiItemService$ForVersionConflictList.<init>(CommonInternalXiItemService.java:326)
at com.sap.aii.ib.gui.applcomp.StartupCodeEntry.guiStartup(StartupCodeEntry.java:147)
at com.sap.aii.ib.gui.applcomp.StartupCodeEntry.startup(StartupCodeEntry.java:108)
at com.sap.aii.ib.core.applcomp.IStartupCodeEntry.startupIfNotAlreadyDone(IStartupCodeEntry.java:33)
at com.sap.aii.ibdir.gui.applcomp.StartupCodeEntry.startup(StartupCodeEntry.java:52)
at com.sap.aii.ib.core.applcomp.IStartupCodeEntry.startupIfNotAlreadyDone(IStartupCodeEntry.java:33)
at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponentImpl.startup(ExplicitApplicationComponentImpl.java:116)
at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponents.startup(ExplicitApplicationComponents.java:383)
at com.sap.aii.ib.core.applcomp.ApplicationComponent.startup(ApplicationComponent.java:209)
at com.sap.aii.ib.gui.login.SplashLoginFrame$6.run(SplashLoginFrame.java:429)
at java.awt.event.InvocationEvent.dispatch(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
#0 13:28:46 [AWT-EventQueue-0] DEBUG AutoLog.created.com.sap.aii.ib.core.service.TypeNotRegisteredException: Type "versConflList" is not registered in the service class Type Service - Type InformationThanks guys for the response..
I checked the IR and the SAP Basis has been added. Here are the details I got.
Name: SAP_BASIS
Version: 700
SWCV: SAP BASIS 7.00
Available Support Packages: 12
Any more suggesions/feedback will be greatly appreciated.
Thanks -
Accessing receiver communication channel parameters in mapping
Hi,
I have an XI sender to HTTP receiver scenario with mapping to set the value of the target URL, which is set as an Adapter Specific Message Attribute (TargetURL).
The mapping is responsible for adding hashed authentication credentials to the end of the URL string.
Ideally I'd like to be able to read the values of the host, port and path from the receiver communication channel configuration than hardcode these in the mapping class.
Does anyone know whether it is possible to read receiver communication channel values within mapping?
I could store the full URL string in the communication channel but this would not be secure hence the preference for doing this in mapping.
Thanks,
Alantry using Dynamic confiuration
please check HTTP rec doc: http://help.sap.com/saphelp_nw2004s/helpdata/en/43/64dbb0af9f30b4e10000000a11466f/content.htm
○ URL: TargetURL
○ HTTP Destination: HTTPDest -
Query regarding OS Command in Receiver Communication Channel
Hi All,
Consider the following :
1. Sender communication channel picks up file <abc.txt> from /files/in directory. The CC is configured to archive the file in the location /files/archive.
2. Resulting Message is processed successfully in integration engine.
3. Receiver communication channel is configured to place the file in target directory /files/out, and the Run OS command after message processing is set as : "/scripts/FTP_SCRIPT.pl %F".
The above scenario works fine, but I do not understand why it works. :).
I can see (by looking at logs maintained by the script FTP_SCRIPT.pl) that in step 3 %F passes "/files/in/abc.txt" as a parameter.
I believe that the file should not be available in the "in" folder because the sender communication channel would have already archived it. Why is it available?
In what order is XI processing steps 1-3 in the background?Hello,
If you have selected Adaper Specific message attributes in both the adapters(File sender/Receiver), the same file name which is currently being used will be passed to the place holder '%F' .
and you might have selected RUN OS command before message processing.
Just confirm.
Regards,
Sreenivas. -
Communication Channel in error
Communication Channel in error though the error has been resovled. New files are processed succesfully !!!
CC still in RED.
I tried the basic steps which can change the status .( by deactivating the channel and activating the same , stopped and started the same ) . It resulted the same.
Thanks,
KarthikThe information that is displayed for the status of a channel on the individual cluster nodes is status information that is accumulated to give the overall status of the channel in the table of communication channels.
If the cluster nodes have at least one status that is above all other statuses in the status hierarchy, the channel receives this status as the overall status. The possible statuses correspond to those in the table of communication channels and have the following hierarchy: (red), (yellow), (green), and (gray). A combination of green or yellow with gray is not possible.
○ The information displayed for the processing entries of the selected cluster node is current runtime information on message processing. You get to Message Monitoring by selecting the message ID displayed.
Depending on the adapter used, the type and occurrence of the information here can differ. The information forms the entry in the Processing Errors column in the table of communication channels. The newest result is taken from the table of the cluster nodes.
○ The information about channel administration displays when and by whom a channel was previously started or stopped. You can only start or stop a communication channel for an entire server cluster, not on individual cluster nodes. However, since errors can occur on individual cluster nodes during the execution of these actions, error information is also displayed for each cluster node.
○ If the channel is controlled by availability times, the Availability Times tab page is displayed. All other availability times that are relevant for this channel are also displayed. You can exclude specific availability times and, if necessary, reschedule them.
Since only active availability times are displayed, it is possible that availability times do exist for the selected communication channel even if none are displayed.
○ The information on the Settings tab page displays how often an attempt is made to send messages to this channel, and at what time intervals.
The default settings are taken from the outbound properties for the J2EE service SAP XI Adapter: XI. You can overwrite and save these values. You can also restore overwritten values.
Information about changes made to the settings is always displayed.
The Settings tab page is only relevant for receiver channels and is therefore only displayed for channels of this type.
regrads
chandra -
How can One sender communication channel pick two file from two location
Hello
I have a requirement that how can One sender communication channel pick two file from two location.Both the file has same name...How to configure the one receiver communication channel.i dont have any IR,no mapping..Please help me...>
Soumitra Sinha wrote:
> Hello Vijay
> I already done the adapter specific message attribute.i am getting the file name properly.but that is nothing to do with my req.i am again clearing my problem:
> i have two folder folder a,folder b.Both has the same file credit0002. i have two destination folder i have one sender and one receiver channel.I dont have any IR.How one sender channel can pick file from two location and how one receiver channel can put in two location.please help me..
Ok now I get your requirement.
you cant achieve this - how one receiver channel can put in two location if you dont have a dynamic configuration defined i.e Adapter specific attributes.
easy way - involve IR mapping
else
have a adapter module to define your dynamic configuration.
Ref: /people/daniel.graversen/blog/2006/10/05/dynamic-configuration-in-adapter-modules & /people/michal.krawczyk2/blog/2006/10/09/xi-dynamic-configuration-in-adapter-modules--one-step-further
Set the dynamic directory/file name etc for your receiver adapter. -
Sender communication channel with file adapter
Hi All,
Here i am facing some error with the communication channel in which i have used FILE adapter. Here i am using PI 7.0. Here i have configured the communication channel. but i didn't checked the "operating system commands". and i checked the " adapter specific message attributes". i dont know whether i have to check these adapter specific message attributes or not. When i have gone to runtime work bench there i saw in adapter monitoring. there it is not showing any error. but in communication channel monitoring it is showing that it is having -
"processing errors" but i am not getting where will be the error.. Any new ideas will be appreciated.
Thanks in advance,
RamanaHi Bhavesh and Aaron,
Here i viewed the XMl format of the sender file in the mapping. there i found the difference between the file i am trying to pick up by the adapter and the XML instance of the sender interface in mapping. The difference is there in the message type of the <ns0> tag the file i am trying to send is having one message type and name space, where as the XMl instance is having the other message type and same name space.
i think that will the problem in processing my file. i am not sure about it.please any of you confirm that if it is th processing error i am facing or not.
Thanks for your efforts.
Regards,
Ramana. -
End-of-file on communication channel
Hello,
I'm using Oracle9i Release 9.2.0.3.0
My success SQL:
SQL> SELECT livro_isbn FROM tab_livros w where w.livro_cont.extract('/Livro/Livro_Titulo/text()').getStringVal() LIKE 'Geografia SNEM Prof.';
LIVRO_ISBN
8508081707
My unsuccess SQL:
SQL> select livro_isbn from tab_livros, table (xmlsequence extract(livro_cont,'//*'))) t where extra
ctValue(value(t),'/*/text()') like 'Geografia SNEM';
select livro_isbn from tab_livros, table (xmlsequence(extract(livro_cont,'//*'))) t where extractVal
ERROR at line 1:
ORA-03113: end-of-file on communication channel
In time: Livro = Book in portuguese.
How can I find a term in any node from my XML?
Thank youIf the data is that confidential then the best way to prcoceed with this would be for your authorised support contact open up an iTAR with Oracle support. This will provide a non-public way for you to submit the document. If post the iTar number I can then take a look.
If you prefer you can also mail it to my hotmail account ([email protected]). If you choose to post it here I can use moderator privlidge to delete the post after i see it.
Remember that Oracle does not guarantee any level of support in these forums. In theory they are meant to be self-help forums, where users help each other. However since XML DB is new, and I am the product manager, I do try to make some effort to provide a some level of support, even though my management does not necessarily regard this as one of my primarly responsibilities.. -
Deriving file path in communication channel depending on environment
We have received this request:
======begin request======
As you know transporting communication channels is a tedious affair
that consists of exporting and importing objects, manual steps to
modify the communication channel for the target system and then
activation. The process of manual modification of the communication
channel after it has been transported is particularly subject to human
error.
Could you please investigate using dynamic/logical names for such
things as:
Directory names
Filenames
Any thing else that can be derived dynamically, or set logically.
======end request======
An example would be a directory path in a file adapter:
in dev: <drive>/dev
in prod: <drive>/prd
We don't want to reconfigure the channel on transport. Value mapping
is not an alternative as we would have to maintain a table anyway and
use a custom function to derive. Dynamic Configuration in a map
requires a custom function and lack of flexibility. Adapter Specific
Message Attributes don't really help.
Is there some way environment variables can be accessed and configured in a communication channel?Hey Dave,
reconfiguring Adapters after Integration Directory objects transport is a necessary step, since the addresses/ports of production environments will almost always be different.
Nevertheless, you will need to manually reinsert the path information in Prod File adapter, and there you could use "prod" instead of "dev".
A possible workaround to make it a little more "automatic" would be to refer to the Business System name in the File path, using variable substitution. In this case, for example, use the variable "dir" in the variable substitution table, refering to the property "message:receiver_service" (without quotes), and in the path field, use something like "/%dir/" (also, without quotes).
Regards,
Henrique.
Maybe you are looking for
-
I have office 2013 and it uses word to save and open .pdf files.
I want to use Adobe Reader XI, how can I use that instead of Word?
-
CRYSTAL REPORT FOR ENTERPRISE ON ECC
Hi Everyone, I have been trying to connect Crystal Report for Enterprise over ECC via universe as we don't have option to connect CR4E directly to ECC. So, I have made a universe in IDT and published it in repository. Now, when I am using that univer
-
Web Dynpro application calling external web server using HTTPS giving error
Hello, I don't know whether this is the right question in this forum but my ABAP web-dynpro applicaiton is expected to call another HTTP application on external web server through HTTPS. Presently it is calling through plain HTTP but we want to have
-
Substitution for FI Parked document
Hi all, I have a requirement to make some field like xref2 substitution when I make up a parked document via F-63. I am aware that regular OBBH substitution is not available for parked docs. So the question is do anyone could suggest any standard sol
-
In the web client, How do you go about changing tab page names. For instance, the tab page default on complaints transaction has a heading called technical analysis. I want to change it to just analysis. I looked in the tab groups I see the event