Communication channel doesn't show in runtime workbench
Hi,
In Integration monitoring Runtime Workbench does not show communication channel list in communication channel monitoring. It shows empty but we have created lot of communication channels. This is problem in XI adapter or any other problem? Please can anyone tell the solution for that.
Regards
Vijay
Hi,
If ur searching for Xi and Receiver IDOC adapter in RWB.U cant find them in RWB then run in IS.try to check ur sender adapter and u can find the complete flow of it.
Thanks and Regards,
Phani Kumar
Similar Messages
-
Communication channels are not exist in Runtime workbench
Hi gurus,
I did one file to file scenario. I have two problems.
1. I have created communication channel in the configuration step. I have activated my scenerio too. But when i check the communication channels in the runtime workbench im unable to see my communication channel. My communication channel doesnotexist.
2. How can i create the source directory and target directory
Kindly help me solve this problem.
Regards,
Ramalakshmi.GHi
Cache refresh : SXI_CACHE
Creating Source / Target Directory : U can use folder within XI landscape for (NFS)
If u r using FTP create folder in the FTP Server and use those : but select FTP as transport protocol
u will be asked for ftp ip / username / password
rgds
srini -
RGB channel doesn't show the imported images...
RGB channel doesn't show the imported images... i can see them in seperate blue, red and green channel but not in RGB...please help....
(I'm using Photoshop CS6)The problem appears in every image I try to open (whatever format or origin). The images I try to import come from rendering in Autodesk 3ds max , from my camera (sony cyber-shot ) or are just stock images... I had no problem with photoshop cs5.1....
Here's my system info:
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x32
Operating System: Windows Vista 32-bit
Version: 6.0 Service Pack 2
System architecture: Intel CPU Family:6, Model:7, Stepping:10 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1
Physical processor count: 2
Processor speed: 2394 MHz
Built-in memory: 3038 MB
Free memory: 1387 MB
Memory available to Photoshop: 1671 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: ATI Technologies Inc.
Video Card Renderer: ATI Mobility Radeon HD 4650
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 900, right: 1600
Video Card Number: 1
Video Card: ATI Mobility Radeon HD 4650
OpenCL Unavailable
Driver Version: 7.01.01.849
Driver Date: 20090208190620.000000-000
Video Card Driver: atidxx32.dll,atidxx64,atiumdag.dll,atiumdva.cap,atiumd64,atiumd6a,atitmm64
Video Mode: 1600 x 900 x 4294967296 colors
Video Card Caption: ATI Mobility Radeon HD 4650
Video Card Memory: 1024 MB
Video Rect Texture Size: 8192
Serial number: 92298703051332501777
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6\
Temporary file path: C:\Users\User\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 224,5G, 166,2G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2012/01/18-15:07:40 66.492997 66.492997
adbeape.dll Adobe APE 2012/01/25-10:04:55 66.1025012 66.1025012
AdobeLinguistic.dll Adobe Linguisitc Library 6.0.0
AdobeOwl.dll Adobe Owl 2012/02/09-16:00:02 4.0.93 66.496052
AdobePDFL.dll PDFL 2011/12/12-16:12:37 66.419471 66.419471
AdobePIP.dll Adobe Product Improvement Program 6.0.0.1654
AdobeXMP.dll Adobe XMP Core 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPFiles.dll Adobe XMP Files 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPScript.dll Adobe XMP Script 2012/02/06-14:56:27 66.145661 66.145661
adobe_caps.dll Adobe CAPS 6,0,29,0
AGM.dll AGM 2012/01/18-15:07:40 66.492997 66.492997
ahclient.dll AdobeHelp Dynamic Link Library 1,7,0,56
aif_core.dll AIF 3.0 62.490293
aif_ocl.dll AIF 3.0 62.490293
aif_ogl.dll AIF 3.0 62.490293
amtlib.dll AMTLib 6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00) 1.000000
ARE.dll ARE 2012/01/18-15:07:40 66.492997 66.492997
AXE8SharedExpat.dll AXE8SharedExpat 2011/12/16-15:10:49 66.26830 66.26830
AXEDOMCore.dll AXEDOMCore 2011/12/16-15:10:49 66.26830 66.26830
Bib.dll BIB 2012/01/18-15:07:40 66.492997 66.492997
BIBUtils.dll BIBUtils 2012/01/18-15:07:40 66.492997 66.492997
boost_date_time.dll DVA Product 6.0.0
boost_signals.dll DVA Product 6.0.0
boost_system.dll DVA Product 6.0.0
boost_threads.dll DVA Product 6.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.0.5.19287 2.0.5.19287
CoolType.dll CoolType 2012/01/18-15:07:40 66.492997 66.492997
data_flow.dll AIF 3.0 62.490293
dvaaudiodevice.dll DVA Product 6.0.0
dvacore.dll DVA Product 6.0.0
dvamarshal.dll DVA Product 6.0.0
dvamediatypes.dll DVA Product 6.0.0
dvaplayer.dll DVA Product 6.0.0
dvatransport.dll DVA Product 6.0.0
dvaunittesting.dll DVA Product 6.0.0
dynamiclink.dll DVA Product 6.0.0
ExtendScript.dll ExtendScript 2011/12/14-15:08:46 66.490082 66.490082
FileInfo.dll Adobe XMP FileInfo 2012/01/17-15:11:19 66.145433 66.145433
filter_graph.dll AIF 3.0 62.490293
hydra_filters.dll AIF 3.0 62.490293
icucnv40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
icudt40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
image_compiler.dll AIF 3.0 62.490293
image_flow.dll AIF 3.0 62.490293
image_runtime.dll AIF 3.0 62.490293
JP2KLib.dll JP2KLib 2011/12/12-16:12:37 66.236923 66.236923
libeay32.dll The OpenSSL Toolkit 0.9.8g
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 10.0
LogSession.dll LogSession 2.1.2.1640
mediacoreif.dll DVA Product 6.0.0
MPS.dll MPS 2012/02/03-10:33:13 66.495174 66.495174
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcp100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcp71.dll Microsoft® Visual Studio .NET 7.10.3077.0
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcr71.dll Microsoft® Visual Studio .NET 7.10.3052.4
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CS6 CS6
Plugin.dll Adobe Photoshop CS6 CS6
PlugPlug.dll Adobe(R) CSXS PlugPlug Standard Dll (32 bit) 3.0.0.383
PSArt.dll Adobe Photoshop CS6 CS6
PSViews.dll Adobe Photoshop CS6 CS6
SCCore.dll ScCore 2011/12/14-15:08:46 66.490082 66.490082
ScriptUIFlex.dll ScriptUIFlex 2011/12/14-15:08:46 66.490082 66.490082
shfolder.dll Microsoft(R) Windows (R) 2000 Operating System 5.50.4027.300
ssleay32.dll The OpenSSL Toolkit 0.9.8g
tbb.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll Kernel 9.3.0.113
TFKGEOM.dll Kernel Geom 9.3.0.113
TFUGEOM.dll Adobe, UGeom© 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 6.0.0.24
WRServices.dll WRServices Friday January 27 2012 13:22:12 Build 0.17112 0.17112
wu3d.dll U3D Writer 9.3.0.113
Required plug-ins:
Accented Edges 13.0
Adaptive Wide Angle 13.0
ADM 3.11x01
Angled Strokes 13.0
Average 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Bas Relief 13.0
BMP 13.0
Camera Raw 7.0
Chalk & Charcoal 13.0
Charcoal 13.0
Chrome 13.0
Cineon 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Clouds 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Collada 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Color Halftone 13.0
Colored Pencil 13.0
CompuServe GIF 13.0
Conté Crayon 13.0
Craquelure 13.0
Crop and Straighten Photos 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Crop and Straighten Photos Filter 13.0
Crosshatch 13.0
Crystallize 13.0
Cutout 13.0
Dark Strokes 13.0
De-Interlace 13.0
Difference Clouds 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Diffuse Glow 13.0
Displace 13.0
Dry Brush 13.0
Eazel Acquire 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Embed Watermark 4.0
Extrude 13.0
FastCore Routines 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Fibers 13.0
Film Grain 13.0
Filter Gallery 13.0
Fresco 13.0
Glass 13.0
Glowing Edges 13.0
Grain 13.0
Graphic Pen 13.0
Halftone Pattern 13.0
HDRMergeUI 13.0
IFF Format 13.0
Ink Outlines 13.0
JPEG 2000 13.0
Lens Blur 13.0
Lens Correction 13.0
Lens Flare 13.0
Liquify 13.0
Matlab Operation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Measurement Core 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Mezzotint 13.0
MMXCore Routines 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Mosaic Tiles 13.0
Multiprocessor Support 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Neon Glow 13.0
Note Paper 13.0
NTSC Colors 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Ocean Ripple 13.0
Oil Paint 13.0
OpenEXR 13.0
Paint Daubs 13.0
Palette Knife 13.0
Patchwork 13.0
Paths to Illustrator 13.0
PCX 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Photocopy 13.0
Photoshop 3D Engine 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Picture Package Filter 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Pinch 13.0
Pixar 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Plaster 13.0
Plastic Wrap 13.0
PNG 13.0
Pointillize 13.0
Polar Coordinates 13.0
Portable Bit Map 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Poster Edges 13.0
Radial Blur 13.0
Radiance 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Read Watermark 4.0
Reticulation 13.0
Ripple 13.0
Rough Pastels 13.0
Save for Web 13.0
ScriptingSupport 13.0
Shear 13.0
Smart Blur 13.0
Smudge Stick 13.0
Solarize 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Spatter 13.0
Spherize 13.0
Sponge 13.0
Sprayed Strokes 13.0
Stained Glass 13.0
Stamp 13.0
Sumi-e 13.0
Targa 13.0
Texturizer 13.0
Tiles 13.0
Torn Edges 13.0
Twirl 13.0
Underpainting 13.0
Vanishing Point 13.0
Variations 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Water Paper 13.0
Watercolor 13.0
Wave 13.0
WIA Support 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Wind 13.0
Wireless Bitmap 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
ZigZag 13.0
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
Mini Bridge
Kuler
Installed TWAIN devices: NONE
Thank you both for the interest! -
Communication Channel Monitoring not showing up Communication Channels
Hi All,
PI 7.1 : I have created Communication Channel using File Adapter in ID and activated it. Adapter engine is Central Adapter Engine. But in Runtime Workbench I am not able to see communication channels created under Component Monitoring -> Adapter Engine -> Communication channel Monitoring. Please let me know what is the problem.
And in ID I am getting below warning message for that Communication Channel.
Message: Unable to Check Whether Communication Channel is compatible with selected Adapter Engine since version information for Adapter Engine is missing in SLD.
Any idea? I appreciate your quick help.
Thanks,
CarlHi Abhishek,
I have selected inID , File dapater software component SAP BASIS 7.11 name space http://sap.com/xi/XI/System, adapter "file " is in that name space in ESR. In ESR there is only one BASIS Software Component SAP BASIS 7.11.
Thanks,
Carl -
FILE SENDER COMMUNICATION CHANNEL DOESN'T GET FILE
Hi,
I have create a new sender communication channel with ftp file configuration. Server parameter and source directory are correct.
I have also checked file and directory permission (chmod 777)
Poll interval is 600 secs.
There is no error in communication channel monitor (returned log: CC is correctly configured and started).
Process started every poll interval, but no file is picked up.
Why?
CarmeHi,
What type of file are you processing. Check whether the file type is binary or text mode.
Also check whether the file name you have specified in the CC and the exact file in the directory are the same.
Also check the file processing mode, whether it is read only, delete or in test mode.
If the file is in read only mode when the file first processed, then once the file was processed it would be in read only mode, so if you place the new file it should process, so try deleting the existing file in the directory and place a new file with exact file name along with the correct extension and try to process it.
Also I would suggest you check the exact file extension, by unchecking the radio button in the folder option under the menu tools> Folder options> view-->hide extension for file type.
Regards,
Nithiyanandam -
ServerRuntimes doesn't show ALL runtimes
Folks,
In wlst; I connect to the admin server of a cluster of two managed servers (of which one is co-hosted with the admin (on the same machine)). Then,
runtime()
cd('ServerRuntimes')shows ONLY the server runtimes of admin and of the managed server co-hosted with the admin, but not of the other/second managed server.
What I'm trying to do is convert a weblogic.Admin ... -adminurl ... get -mtype ServerRuntime, which returns ALL runtimes.
Any ideas?
TIAHello sorge,
Is the managed server alive? wlst will show only server runtimes for all the servers that are running, or atleast the servers that Admin server can connect to or accessible to AS.
Thanks,
-satya -
Hi,
we have problems in our xi system (PI 7.0, SPS10). The adapter engine can only be monitored in the communication channel monitoring, available in the runtime workbench!
There sometimes errors disappear. At the moment these errors accumulate!
Is it possible to view these errors/ alerts in the ccms (rz20) monitoring?
So we don't look all the time in the communication channel monitoring!
Have anybody an idea?
Regards,
matthias isenburgHave u seen the discussion
Re: How do I configure an auto-email alert for Adapter engine errors
Regards,
Prateek -
File Structure - Sender Communication Channel
Hi All,
My Sender flat file structure is below like this
Filed1|Field2|Field3|Field4|Field5|Field6
Filed1|Field2|Field3|Field4|Field5|Field6
Filed1|Field2|Field3|Field4|Field5|Field6
Filed1|Field2|Field3|Field4|Field5|Field6
Filed1|Field2|Field3|Field4|Field5|Field6
Filed1|Field2|Field3|Field4|Field5|Field6
I did the Sender Communication Channel configuration - Content Conversion
Document Name : XXX
Document NameSpace: XXXX
Recordset Structure: MT_Test,*
Recordset Sequence: Ascending
Key field Type: String Case-Sensitvie
MT_Test.fieldNames: Filed1,Field2,Field3,Field4,Field5,Field6
MT_Test.fieldSeparator: '|'
MT_Test.additionalLastFileds: ignore
MT_Test.endSeparator : 'nl'
ignoreRecordsetName: true.
But its pick the file, In SXMB_Moni show Currect...
But in Runtime workbench, in Communication Channel moni, it show below like this,
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_Test xmlns:ns0="http://XXXXX">
<JOBS />
</ns0:MT_Test>
What is the Issue, where i missed some thing, In message mapping, its correct..
Thanks.
SRSR,
I am still little confused with your below statement.
But its pick the file, In SXMB_Moni show Currect...
But in Runtime workbench, in Communication Channel moni, it show below like this,
>
> <?xml version="1.0" encoding="UTF-8" ?>
> - <ns0:MT_Test xmlns:ns0="http://XXXXX">
> <JOBS />
> </ns0:MT_Test>
You mean to say that in MONI, the mapping output is fine, but when you check the output at RWB -> CC Monitoring for the Sender Channel, then you get the above mentioned XML?
This means that there is nothing wrong with your source CC settings. If the entry in RWB -> Sender CC is wrong, your MONI entry will never be right. So, this is really weird.
What is the source structure that you have defined in DT?
Regards,
Neetesh
Edited by: Neetesh Raj on Sep 29, 2009 2:31 PM -
XI communication channel missing in communication channel monitoring
Hello partners,
I have a problem with communication channel monitoring.
I have defined a communication channel of Adapter Type = "XI" in the integration directory.
I have also sent messages successfully via this communication channel.
But the communication does not appear in the list of available channels in the selection list of the communication channel monitoring.
Can someone tell me how I can get monitoring info of an "XI" communication channel?Hi,
From SP17, you have a new feature
http://help.sap.com/saphelp_nw04/helpdata/en/44/46d1a56faf52d3e10000000a1553f6/content.htm
<i>The Runtime Workbench has the following new functions:
● Component monitoring: Communication channel monitor
In component monitoring, you can use the new communication channel monitor to call information about the status of your communication channels and the corresponding adapters. You can also administrate your communication channels.
Unlike the adapter monitor, the communication channel monitor also provides current runtime information about the communication channels of individual adapters, as long as they are registered for communication channel monitoring.
To monitor adapters that do not provide runtime information to communication channel monitoring, continue to use the adapter monitor.</i>
Regards,
Bhavesh -
Communication Channel marked all files as being read on FTP
The Mailbox FTP has all the files flagged as being read when a single file is read through a communication channel. I manually unflagged the status field so all files had a status of N so none were pulled. I had 14 files for this test flagged as N. I turned off all our CCu2019s. I activated one that was pulling the last file in the list based on the Service Ref# which is unique file name. I refreshed the dir of the FTP several times as the CC was running. One by one as the flag was changed to Y (file read) from top to bottom. It only took a second for each one until it got to three very large files and the status stopped while it was reading the file. After a minute it continued to change the flag until it read the last one. All 14 files on the ftp now had the status flag changed to Y. It appears it actually read the file content one by one and set the flag until it was done. Do you have any ideas why it would do this? From a dos prompt I donu2019t have any of these issues so Iu2019m guessing itu2019s something unique in the SAP FTP adapter that is doing it?
From a dos prompt I can successfully do a get 003520827870964903 c:data.txt and it will only update that ST flag for that one file as being read. I can also do a get %EDT39A22%W_Z1JI4960 c:data.txt and it will only flag the four files as being read that have that Mailbox/APRF value. Now I'm trying to get my CC to do the same but no matter what I try it marks all six files as being read. I have in my source directory %EDT39A22%W_Z1JI4960 and * for a file name and this will mark all files as being read when activated. I have entered 003520827870964903 for a file name to further qualify and it still marks all files as being read. It seems to be getting the file I want cause when I view the communication channel monitor it shows the right data in the payload but it always refers to another file for the archive / delete / test option from the processing tab. There are no problems having a CC write a file out using similar parms for Mailbox/APRF, but trying to read a single file using the Service Ref # or a collection of files using a Mailbox/APRF mask seem to update the status for all files as being read. Any suggestions are welcome.
Mailbox ID St APRF SNRF Service Ref. #
CMS N CCR_GRIEF filekh5LhC0000 003520599937481654
CMS N CLAIM_STLMNTS fileza2TBr0004 003520769829611413
EDT39A22 N W_Z1JI4960 ileh3s0e60000 003520827846664146
EDT39A22 N W_Z1JI4960 fileUfXjR 003520827868994913
EDT39A22 N W_Z1JI4960 filePDFfKP0000 003520827870124419
EDT39A22 N W_Z1JI4960 fileQ7RFdR0000 003520827870964903
Edited by: Kenbrown on Jul 28, 2011 9:10 PM
Edited by: Kenbrown on Jul 28, 2011 9:13 PMHave you installed any apps that auto display the emails when they come in? If so the auto read feature may be triggering this, I had a app at one time that showed my emails in the preview window and it made the emails be listed as read... I would check your apps and make sure you are not using something like this unknowingly.
-
Communication Channel Status Is Shwoing RedLed(Error)
Hi,
I used File Adapter in my communication channels that is FTP ... scenario is working fine.. but in the RWB- Communication Channel Monitoring the Communication cHannel is showing RedLed(ERROR Status)
The FTP server was running on UNIX.. that is Bourne Shell ... If the file is there in the source directory it was processing successfully.. even though the remaing all the time it was throwing the following Error Mesage in the RWB-Communication Channel Monitoring..
Could not process file 'SIMS-10.xml: No such file or directory': com.sap.exception.standard.SAPIllegalArgumentException: The parameter "argument" has the value "ftp://10.25.10.6:21./SIMS-10.xml: No such file or directory", so it contains the character "ftp://10.25.10.6:21./SIMS-10*.xml: No such file or directory" which is not allowed
Please Suggest me.
Regards
JainHi ,
We are polling a particular FTP site for files. If file is found communication channel is showing green led with no error message, but when file is not found it is showing red led with an error message in RWB .
My concern :
1. We applied the same approach in other scenarios also , but never came across this type of situation. In other cases if file is not found, communication channel is not showing red led and error message , so this is a metter of real concern to me.
2. I believe that if communication channel is showing red led then definately alerts will get triggered for any error in adapter engine . correct me if wrong ...?
the only difference i found is the shell on which FTP site is configured...We are getting error in bourne shell but no errors in Korn shell ,,,Our XI box is on HP-UX but FTP site is on Solaris 2.8
Is it a bug In PI 7.0 ....?or Something is missing from FTP site ? or some configuration missing at configuration channel level.
Regards -
Hi...All,
i am trying to do some changes in my receiver communication channel, it was showing is already locked in another change list by user XXXXX If necessary, you can reassign the other user's change list to yourself.
but i am not found any locks in my system
how can i solve this error, pls suggest me..
regards,
Pasi.Hi,
Go to administration in this url
http://<host name>:<port name>/rep/support/admin/index.html
In administration of locks and caches click on lock overview
U can select your object and click on remove selected locks push button.
Regards,
Pradeep A. -
Communication Channel status successful but file Not Delivered.
Hi All
I have a receiver communication channel which is showing status as SUCCESSFUL but the log says The message status was set to NDLV. Due to which am unable to retrigger it even form Message Monitoring
Its set to FTP & is not received at that side.
Kindly put in your inputs on the possible solution for this issue.
Regards
Soumen!!!I dont think it is held in queue.....you will get an error (the one which you got) and then the message will go into Error state.
When the channels are stopped and it receives a file it raises an error alert and is set to error state. Later when channel is started the file gets processed(You can try doing it.I did). Here it gave the error message but sets the channel to successful. Thats what is botehring me.
Looks like you are scheduling the receiver channel....why?
Had some requirement...
@ Balaji : Its successful -
Communication channel Inactive
Hi All,
Right now I'm working in RFC<->SOAP scnario. After creating the receiver communication channel with soap adpter I tried to execute the scenario. but when i start the communication channel in communication channel monitoring it shows "Channel started but inactive" . is there any issues in that or shall i continue working with this one.?hari,
SOAP channel gets active when some data is sent through it.
1)
Did you change any configuration in the SOAP channel, then check your Adapter configuration.
check message interface and action
2) If it is not active, you have to check correct message is coming to the SOAP adapter. check in the SXMB_MONI call adapter pipeline payload.
if any problem here, you have to check your mapping(before that try re-importing WSDL)
-If you made any changes in Message Interfaces after you executed the scenario, you need to clear the cache.
Go to SXI_CACHE and do delta cache refresh & complete cache refresh
let me know the status
regards,
nikhil -
Receiver determination is not showing communication channel
HI, I am working on file adpater scenario. I have created communication channel and later deleted it. Then created new communication channel and completed other steps like - creating- receiver determination and interface determination. But when I am trying to create Receiver agreement , I am not getting the new communication channel in selection list. Its showing old communication channel that i created and deleted. There are no entries to activate in Change list and cache refresh also working fine.
Please let me know why its showing old comunication channel, instead of new one.Dear rajaram,
I found two chances to have the above mentioned situation.
[1]. You have deleted the channel from the scenarios and Change lists, But you may find the same in the Objects Tab[between the Change LIst tab and Scenarios Tab].
[2]. The second chance is that you may created the channel with the conflict on the 'Sender' or 'Receiver'. Check the second one. I believe the second one made this probelm
regards
Neo
<i>reward me, if found useful</i>
Maybe you are looking for
-
Hi Experts, while creating Billing Doc in Logistics with deliveryNo as reference i am getting error that no accounting document generated. can u suggest me why this occured thanks in advance
-
Camera Roll Photos does not sync to Ipad2 using icloud
Icloud camera roll photos will not download my camera roll to my ipad 2, only will download the phonestream photos. Can someone tell me how to get the camera roll photos to sync on ipad.
-
Amazon Store Packaged App Question - Web Service
Hi! I was very excited when I saw the Amazon Store packaged app! It's exactly what I need for a venture of mine, but unfortunately the packaged app is not working. I get the following error: <?xml version="1.0"?> <SOAP-ENV:Envelope xmlns:SOAP-ENV="ht
-
DC CS4 "Bluetooth not available"
I am trying to link to a Nokia E71 in a project in Device Central CS4. In the "New Project" dialog box, I am able to select the phone and the resource file (swf file). However, when I select a new task- "Send to Bluetooth Device" and click the "Searc
-
Reversing iTunes organized file structure
Help! I just imported my entire music library and had checked "keep iTunes music folders organized" under preferences. In my "my music" folder I had my songs named artist - title (Johnny Cash - Ring of Fire)and now iTunes renamed all the songs by tra