Communication Channel - Integrating with existing iMS52 and iDS52

Hi,
Any one tried integrating Portal Server JES2004Q2 channels with existing iMS52 and iDS52?
How about schema? Did you use the existing Dir for configuration? Please share, as at the moment we are encountering problems even installing it. Anyway that's a different story.
Regards,

Use Runtime Workbench -> Component Monitoring -> Communication channel monitoring
U could not start or stop individual communication channel through Visual Admin. U can start or stop whole adapter through it.
Regards,
Prateek

Similar Messages

SiteMinder integration with the internal and external facing portals

Hi ,
We are in development phase for SiteMinder integration with the internal and external facing portals.The proposed dual authentication scheme which requires both SiteMinder for External facing portal (EFP) and LDAP for Internal portal .is it possible?
and is it possible to main to diff LDAP directories one is external users and one is for internal users.?
If you maintain 2 diff(external & internal) LDAP Directories in Siteminder Policy Server what about external users which are not exit in portal data source .
I appreciate if anyone can help me for my above query .
Regards
Tag

Hey Tag,
We do have a physical external Portal and a physical internal portal. The both the external and internal are connected to 2 LDAP directories.
For example the External Portal is connected to the Employee LDAP Direcotry and the Customer LDAP Directory. The Internal Portal is connected to the US Employee LDAP Direcotry and the EMEA LDAP Directory.
So each one of them is connected to 2 different LDAP Directories.
I believe that the Siteminder Policy is setup such that the Internal portal has a policy and the External portal has a seperate policy on the same Siteminder Server. Then each of the Policies is configured to connect to the approiate LDAP Directories.
You have to maintain the LDAP Directory information in both the portal and Siteminder Policy Server. It is required in the policy server so that it can authenticate the user and it is required in the Portal server so that it can authorize the user and display content based on thier assigned roles.
Hope that helps.
Regards,
Keith

PPDS integration with DP,SNP and GATP

Hi,
Can anybody provide details for integration of PPDS with DP, SNP and GATP
Thanks
suresh

Hi,
Integration with DP
Transfer of PIRs to PPDS
Integration with SNP
This plan should ensure that the required product quantities in your supply chain are available at the right place, at the right time, without overloading bottleneck resources for production and transportation.
Convert SNP receipts into PPDS Receipts
Integration with GATP
CTP and MATP generate Procurement proposals to PPDS
Thanks
sreeni

Communication Channel Error with MDM PI Adapter

Dear Experts,
We had new sever for PI(image copy). In new PI server we are facing problem only with MDM adapterin communication channel monitoring and below error occuring.
*" MDM Adapter listener could not start due to: Can not create repository session '<server=SAPMDMD serverUser=Admin repository=TTSL_Vendor_Dev user=Admin>' caused by: Connection Failed: Cannot create connection to MDM Server 'SAPMDMD' for one of the following reasons: (1) server does not exist, (2) server is not started, or (3) input/output problem while creating connection, error code: UnknownServer "
Any expert please help us to resolve this.
Thanks in advance.
Regards,
Hemu.

Hello Heymanth,
Make sure that connection is fine between systems. Test the RFC's in both systems. Also check the services too.
/people/harrison.holland5/blog/2006/12/20/xi-configuration-for-mdm-integration--sample-scenario
/people/ramesh.gulipalli2/blog/2009/11/16/sap-47-to-mdm-integration-using-pi71-part1
Regards
Pothana

Unity Connection Integration with CS 1000 and Meridian 81 - PIMG

I have a customer who have (2) Nortel Meridian 81 and (1) CS1000 for their 3 locations along with Octal 350 servicing 2500 voicemail users today. Customer also has a Cisco UCM in their network today which is servicing their wireless phone users.
UCM and CS1000 are networked together using Q.Sig trunks today. Customer is looking at replacing their Octal solution with a new Voice mail solution.
I was looking at integration documents for Unity Connection using PIMG.
In this scenario, would I need 3 separate PIMG 's at the three remote sites and integrate it with Unity connection or Can I achieve this using just one PIMG at one of the sites, considering the three sites are trunked together using tie-trunks.
http://www.cisco.com/en/US/partner/docs/voice_ip_comm/connection/7x/integration/pimg/guide/cucintpimg090.html#wp1051831
Appreciate any pointers/ help.

Hi there,
Just to add a note to the great tips from Hailey (+5 Hailey!)
We are in the final stages of replacing our "old" Octel with Unity Connection, part of
which is integrated to our CS1000 and CUCM in a "Hybrid" deployment like yours
Centralized Voice Messaging
Cisco Unity Connection supports centralized voice messaging through the phone system, which supports
various inter-phone system networking protocols including proprietary protocols such as Avaya DCS,
Nortel MCDN, or Siemens CorNet, and standards-based protocols such as QSIG or DPNSS. Note that
centralized voice messaging is a function of the phone system and its inter-phone system networking,
not voice mail. Connection will support centralized voice messaging as long as the phone system and its
inter-phone system networking are properly configured.
Setting Up a Nortel Meridian 1 Digital PIMG
Integration with Cisco Unity Connection
Attachments:
cucwithnortel.pdf (308.1 K)
Centralized voice messaging provides voice messaging services to all users in a networked phone system environment. Connection can be hosted on a message center PINX and provide voice messaging services to all users in an enterprise assuming the message center PINX and all user PINX phone systems are properly networked.For a centralized voice messaging configuration to exist, a suitable inter-phone system networking protocol must exist to deliver a minimum level of feature support, such as:•Message waiting indication (MWI).•Transfer, which ensures that the correct calling/called party ID is delivered to the voice messaging system.•Divert, which ensures that the correct calling/called party ID is delivered to the voice messaging system.Other features may be required depending on how the voice messaging system is to be used. For example, if it is also serving as an automated attendant, path-replacement is needed as this feature prevents calls from hair-pinning.
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/design/guide/7xcucdg050.html#wp1053538
Cheers!
Rob

Why is a sender communication channel not required for IDOC and PROXY ?

Hello,
In case of IDOCs, metadata will be available in PI for the IDOCs used both at inbound and outbound.
Why is a sender communication channel is not required in case of IDOC and PROXY outbound scenarios (i.e. IDOC to File or PROXY to file ..) when a receiver channel is required for scenarios like file to IDOC or file to PROXY.
Though this might be a regular question, I am not able to find a proper reason.
Please let me know the reason for the above request.
Thanks & Regards.

You will create RFC destination in ECC , it will have details about PI system details, when ever you send IDoc, ECC will use Port and RFC destination to connect PI Integratiion engine to deliver data to PI.
But when receiver side you will create RFC destination in PI with ECC details, but to call RFC destination and Port we need medium that was the reason we create IDoc communication channel.
Even the same case for Proxy also, but HTTP deastination establish the conection between ECC and PI, but receiver side you have to create XI channel with PI integratioin engine adress to post data.
Regards,
Raj

Problems with existing stock and batch management indicator

Hi,
We would like to set the batch management indicator for a material.
However, there is stock on the material for the given plant.
The different stock categories for the plant/material combination are as follows (according to transaction MMBE):
Unrestricted use 150
Reserved (for production ordeers) 42
Open order qty (incoming PO) 100
"When I try to set the batch management indicator in MM02 I receive the following error message:
Material Master Maintenance
The batch management requirement cannot
be changed for the following reasons:
Stocks already exist at plant level.
Plant SLoc
   PL01 SL01
   PL01 SL02"
Can someone please guide me in how to remove the stock and the reservations, so that we can set the batch management indicator? Does the reservations of stock have any impact (there are reservations for 5 different production orders for this material)?
Thanks in advance,
Lars

in plant A, you have to add 21 in current period (e.g. with 202 movement), then you issue 171 in previous period. with 201. Result: both periods are zero.
plant B, just issue 17 in previous period with 201.
for Plant A   171 with movement 202 back into stock with previous period date, and subsequently 21 goods issue using 201 in current period.
for plant B: 17 with movement 202 and previous period date.

Portal integration with E-Business and Discoverer 10g

Hello Everyone,
We have a R12 integrated with SSO/OID. We also have a standalone Oracle BI Discoverer 10g. We want to implement Oracle Portal here. One of the requirements of this project is to have a common home page for both E-Business Suite login as well Discoverer access. Right now E-Business Suite login is seperate and Discoverer home page is seperate (because it comes from a Standalone installation)
1) What are the benefits of having AS Portal 10g for end users ?
2) To begin with, we would like to go with the minimum portlets.
3) Is it possible to have a common home page for both E-Biz access and the Discoverer acess after Portal integration ?
4) Do you have some screenshots of how things look after Portal integration
-Thanks
Srinivas

Hi,
take a look in metalink Note:313418.1. :
"Using Discoverer 10.1.2 with Oracle E-Business Suite 11i"
Look in section 6 - post installation.
Follow the steps and have a very good luck.

Communication channels are not exist in Runtime workbench

Hi gurus,
I did one file to file scenario. I have two problems.
1. I have created communication channel in the configuration step. I have activated my scenerio too. But when i check the communication channels in the runtime workbench im unable to see my communication channel. My communication channel doesnotexist.
2. How can i create the source directory and target directory
Kindly help me solve this problem.
Regards,
Ramalakshmi.G

Hi
Cache refresh : SXI_CACHE
Creating Source / Target Directory : U can use folder within XI landscape for (NFS)
If u r using FTP create folder in the FTP Server and use those : but select FTP as transport protocol
u will be asked for ftp ip / username / password
rgds
srini

Integration with ECC 6 and Xcelsius

Hi,
I would like to know if its possible to integrate Xcelsius directly with an ECC report.
For example, take the ALV data and 'send' it to Xcelsius in order to have an Xcelsius report.
I know that Xcelsius has (now), built in integration with BW queries, but wonder if that is proprietary with BW, or can the concept of integrating a report from BW work in ECC?
Please advise.
Thanks.
JP

Hi,
in case you would like to build an Xcelsius dashboard on top of ERP data you can use Crystal REports to connect to the ERP system (see here: /people/ingo.hilgefort/blog/2008/03/23/businessobjects-and-sap-part-4) and then you can use Live Office to connect Xcelsius to a Crystal REports objects. see here:
XC, CR and LO Part 1 of 4
/people/ingo.hilgefort/blog/2008/10/03/businessobjects-and-sap-part-1-of-4--creating-a-xcelsius-dashboard-on-top-of-sap-bi
XC, CR and LO Part 2 of 4
/people/ingo.hilgefort/blog/2008/10/07/businessobjects-and-sap-part-2-of-4--creating-a-xcelsius-dashboard-on-top-of-sap-bi
XC, CR and LO Part 3 of 4
/people/ingo.hilgefort/blog/2008/10/07/businessobjects-and-sap-part-3-of-4--creating-a-xcelsius-dashboard-on-top-of-sap-bi
XC, CR and LO Part 4 of 4
/people/ingo.hilgefort/blog/2008/10/10/businessobjects-and-sap-part-4-of-4--creating-a-xcelsius-dashboard-on-top-of-sap-bi
In regards to an ALV - there will be an integration with Crystal Reports but not for Xcelsius and keep in mind that an ALV is a push model and is only available when the transaction is been executed.
Ingo

Integrating with existing DB

Hi,
I'm investigating Kodo, and how easy it would be to integrate with
existing tables (relational obviously). I didn't find reference to this
in the documentation.
Specifically, I want some tables to have BLOB/CLOB columns, but I don't
want KODO to touch/manage/even think about them. Is this possible? Can
I have control over the field name/column name mapping, and the DB table
name mappings?
I also have a requirement of having a composite primary key for just
about everything. (The first part of the key indicates the company
using the database, and provides extra protection against invalid access
of data in a multi-customer setup). I have read all sorts of nasty
things about having to map my keys to Strings and back again. Is this
going to be an issue/performance issue?
Thanks
Q

I have an existing application that I'm trying to switch from Poet to Kodo.
class A {
private int a;
class B extends A {
private int b;
TABLE A (int A_OID, int a);
TABLE B (int B_OID, int a, int b);
Object identifiers (IODs) are globally unique (actually intercorporate
for us).
If one object of A and one object of B exist, then there will be one row
in each table.
Is it possible to map Kodo like that? It appears that attribute a must
be stored in the table A.
Thanks,
Joe Batt
Abe White wrote:
Kodo lets you completely control the mapping process if you want to. Given
that you have an existing schema, you might want to try our reverse
mapping tool, discussed here:
http://www.solarmetric.com/Software/Documentation/latest/docs/ref_guide_pc_reverse.html
That can give you a good starting point. If you already have your
classes, though, then see the metadata section for how to control how
those classes map to tables via metadata extensions:
http://www.solarmetric.com/Software/Documentation/latest/docs/ref_guide_meta.html
The end of that chapter includes examples for mapping some classes to some
tables. If you don't want Kodo to touch some columns, then just don't map
them to any fields.
As far as transferring values to/from strings, Kodo includes the built-in
StringificationMapping (see the "factory" and "externalizer" metadata
extensions), or you can manage that process yourself. Kodo handles
compound primary keys without any problems or performance penalties.

Integration with Peoplesoft HRMS and Payroll

Hi ,
Could you please give me some steps to do a integration of Oracle Apps R12 with Peoplesoft HRMS and Payroll.
whether it is a easy work to integrate within 2months?
else it will take more time for the integration?.
Thanks,
Karthick M

hi,
Cau you please provide some document for the integration between Peoplesoft HRMS & Oracle apps HRMS.
Since i am new to this,the document will be very helpful for me to proceed further.
Thanks,
Karthick M

Aperture remove integration with address book and faces

Is there a way to remove the Faces integration with address book?
Reason I ask is because there seems to be not a good way to integrate the faces with the address book unless there is? For example, in faces I probably have about 20 that are family and close friends. In my address book, I have maybe 200 contacts. When I face people in pictures, I don't want to choose from a list of 200. Plus I notice if I have a friend tagged already, they show up as my friend John, but show up in the list from address book as John B, so who do I pick? How can I just make it one? There are many people that I would want nicknames in faces for or like "Dad" instead of my dad's full name like I have in the address book.
Is anyone else having these issues? How to best integrate with address book or how do I remove the integration?

Even if I attempt to integrate the faces with address book by typing in the full name in the faces after click "i" in the face, then it combines it, but then the address book face disappears to blank with no picture.
very odd behavior, how are you guys dealing with this? Seems like some setting needs to be set otherwise I would think this issue would have been taken care of a long time ago by apple?

Reader X integration with Windows Explorer and protected mode

Hello all.
I'm having some problems with Adobe Reader X under Windows 7 and it seems that I need to disable protected mode. I disabled it by unchecking the related option in edit-preferences, also I created the registry key for the local user (bProtectedMode = 0).
After doing that, the protected mode seems to be disables when I open pdf documents with Reader X, but it's still enabled when previewing documents thumbnails in windows explorer. The issue is that when I open a folder containing pdf files and left click or right click them, two AcroRd32.exe processes spawn and it seems to me that it's a protected mode behaviour (broker process + sandboxed renderer process).
I'd like to know if it's possible to fully disable protected mode so that it remains disabled even when I'm navigating directories with Windows Explorer and documents are previewed. My current Adobe Reader version is 10.1.3.
Thank you very much.

Hi Fernando,
Here's a statement that hopefully helps or at least solves your mystery:
While Protected Mode can be disabled for PDFs viewed with the product, Adobe continues to protect you when 3rd party software invokes a Reader process; that is, Protected Mode sandboxing cannot be disabled for shell extensions. For example, when you use Windows Explorer to preview a PDF in the Preview Pane, it starts a Reader process to display the preview. In such cases, Task Manager shows that two AcroRd32.exe processes spawn and that the operation is occurring with Protected Mode enabled.
Ben

SunONE Portal integration with webseal , Tivoli and Oblix

Hi ,
Can anyone pls explain me the integartion details of SunONEPS 6 with Tivoli , Oblix and Webseal.
I basically would like to know how handshakeing happens between all these.
regards
Arun

Hi ,
Can anyone pls explain me the integartion details of SunONEPS 6 with Tivoli , Oblix and Webseal.
I basically would like to know how handshakeing happens between all these.
regards
Arun

Communication Channel - Integrating with existing iMS52 and iDS52

Similar Messages

Maybe you are looking for