Communication Channel Monitoring not showing up Communication Channels

Hi All,
PI 7.1 : I have created Communication Channel using File Adapter in ID and activated it. Adapter engine is Central Adapter Engine. But in Runtime Workbench I am not able to see communication channels created under Component Monitoring -> Adapter Engine -> Communication channel Monitoring. Please let me know what is the problem.
And in ID I am getting below warning message for that Communication Channel.
Message: Unable to Check Whether Communication Channel is compatible with selected Adapter Engine since version information for Adapter Engine is missing in SLD.
Any idea? I appreciate your quick help.
Thanks,
Carl

Hi Abhishek,
I have selected inID , File dapater software component SAP BASIS 7.11 name space http://sap.com/xi/XI/System, adapter "file " is in that name space in ESR. In ESR there is only one BASIS Software Component SAP BASIS 7.11.
Thanks,
Carl

Similar Messages

VL06I Inbound delivery monitor not showing correct results

Dears,
We are creating inbound deliveries on the basis of POs and creating GR via MIGO after eliminating movement type in line item catageory by using SPRO. For monitoring we would like to use VL06I but its not showing correct results.
Can anyone guid me ?
Regards,
FR

You can list all Inbound Deliveries by selecting "List Inbound Deliveries" Tab in VL06I
May be if you can little elaborate the issue

DS Job Monitor not showing executed .BAT job -did in DI 11.5

When I kick off a job, in Data Services 3.1, through a bat file the job does not appear in the monitor tab of Designer. The job does execute, however you can only tell through Task Manager is that al_engine appears and there is a log file created. Now only way to kill executed job is ending the al_engine process.
The exact same BAT file and corresponding job worked fine in Data Integrator 11.5, only when we upgraded to DS did the monitor stop working. Monitor does show Designer executed jobs though.
My question: Does anyone know how I can view BAT executions through the monitor tab in DS Designer? Note: I do have the "Open monitor on job execution" checked in Tools>Options>Designer>General.

Hi Kevin,
Thx for the reply..
Yes, there table comparison and parallel processing. and also, the volume of the data is huge.
I mean, some of the tables has 130 million row records. It occurs when processing large loads.
the strange thing at this point is; within old version there is no problem. The flows are the same..
thx
omer

Activity Monitor not showing all RAM

I just upgraded to 10.6.3 and then 10.6.8 on my Mac Mini. With 10.6.3 Activity Monitor started showing total of 3 GB of RAM instead of 4 GB as System Profile does show. I ran Rember and all tests passed. It showed 4 GB total memory and 1690 MB available memory which seems consistent with AM's Free memory.
Any ideas why the system seems to "see" (System Profiler) all the memory but not be using it (AM)?
Stephen

WZZZ wrote:
I have a related question about the pie chart.
I have 12GB installed. Free at 9.72 + Used at 2.28 adds up to 12GB.
But adding up Wired at 957.4MB, Active at 754.1MB, and Inactive at 632.4MB comes to 2.3GB (rounded). Adding that to the pie chart figure of 11.75 gives a total of 14.05GB, which isn't possible. What does the pie chart figure at 11.75GB represent? It can't be the 12GB minus the Wired, Active and Inactive either, since that would be much less than 11.75. And if it's supposed to be the total of installed Memory, why the missing .25GB?
Wired+Active+Inactive = Used. Thus, 9.72+2.28 ≃ 9.7.2+2.3 ≃ 12. The 11.75 is a mucked up AM reading. Check the memory via About this Mac->More info. Mine shows exactly 12 GB.

Activity monitor not showing all memory

I just upgraded to 10.7.4 on my Mac Mini from a fresh install of 10.6.3. Activity Monitor shows 3 GB available, while System Profiler shows 4GB:
But when I boot back into 10.5.8, all 4GB are there usable in AM.
When I upgraded from 10.5.8, with 10.6.3 Activity Monitor started showing total of 3 GB of RAM instead of 4 GB as System Profile does show. I ran Rember and all tests passed. It showed 4 GB total memory and 1690 MB available memory which seems about consistent with AM's Free memory.
I use Virtual PC and it has a slider bar to set the RAM for the PC. It shows a little more than 3.5 GB available though above 3 GB it is highlighted in yellow, as if caution about trying to use it. So I set it to a little more than 3GB, started V PC and watched its usage climb in Activity Monitor. When it reached about 3GB the whole Mac OSX locked.
So, then I tried a fresh install of 10.6.3 and it has the same behavior and upgrade to 10.7.4 still the same.
Any ideas why the system seems to "see" (System Profiler) all the memory but not be using it (AM)?
Here is a related issue and the poster's solution was to switch the riser cards around:
https://discussions.apple.com/message/11022205?tstart=0#11022205
Maybe I need to swap my memory cards around.

Well, I finally decided to go on and search for the specs on my Mini, even though all 4 GB work under 10.5.8. Here it is:
http://support.apple.com/kb/SP7
"1GB of 667MHz DDR2 SDRAM (PC2-5300) on two SO-DIMMs; supports up to 2GB"
I bought it in 10/2007. Even for that long ago, it seems like 2GB would have been quite limiting. I upgraded to 4GB soon after I got it. So, I suppose that I get anything above 2GB is a bonus.
Seems strange and sad to me but I suppose it is true.
Still will try swapping the cards around... maybe I can still get the newer OS and all 4GB back by some quirk as before.

Monitors not showing me the full image

Why are my source and program monitors only showing the bottom half of my images? This just started last night.

http://forums.adobe.com/thread/1251905?tstart=0

Bridges monitoring not showing the newly configured Bridges

Hi all,
We have two WebLogic JMS- WebLogic JMS bridges to configure, we did with the appropriate XA based bridges with QoS as "Exactly-once". Both Source and Target Message destinations are defined as per the definitions and also configured Connection Factory separately configured for XA based messages. it is assigned to respective source and target connection factories. After doing every step that required for configuration of Bridges. When we clicked the monitoring tab these 2 bridges are not visible in the list. Strange thing!
Wehave configured another 8 bridges to MQ Series, the are visible in the monitoring tab but they are showing Warn messge "unable to connect to target".
WebLogic 10.3.5.0 version (11g)
Operating environment: Oracle Enterprise Linux 5
Anyone have such experiance in bridge configuration?
Please suggest what we are missing in the configuration? is there any bug? Security concern?

Hi,
Ideally if configuration is proper and connectivity to source and target destination available it should appear in monitoring tab.
Did you checked is bridge is started? You can check if " JMS Bridge > Configuration [General] > Started " is checked or not.
Thanks,
Ranjan

Activity monitor not showing activity

recently upgraded to 10.4.9, tho not sure that is the issue. When I open Activity Monitor there are no processes listed regardless of what I ask it to list (my processes, admin proc., etc.) I trashed the plist and repaired permissions without effect. AM will still show me CPU usage and disk activity in the lower 1/2 of its window, but nothing about memory and nothing at all in the upper 1/2 of the window. Any ideas?
thanks
Steve
Core 2 Duo iMac Mac OS X (10.4.9)

Thanks, Baltwo and Ferd II. I just restarted from a clone backup I did prior to updating to 10.4.9. It was 10.4.8 and the same problem was there with AM. (I don't use AM that often so it could have been there even longer.) Also, the v. of AM was the same as on the drive with 10.4.9— 1.0(19). So, I don't know that reinstalling the combo will install a new AM. (And, since things are otherwise working great, I'd rather not mess with the system.)
Is there a way of downloading a new AM from somewhere. Couldn't find it on the Apple downloads. Or can it be individually restored from my original disks? (Knock on wood, I've never had to restore in all the years I've had macs.)
BTW, Baltwo, this v. of AM's menu bar reads: AM, File, Edit, Monitor, Process, Window, Help. A difference with Intel app vs. your G4, Baltwo?
thanks
Steve

Activity Monitor not showing any processes

See picture: http://bostonwebstudio.com/picture1.png
Hello all, my activity monitor opens as it should, the bottom section works as it should, but the Processes list fails to appear, not matter which list I choose to show (My Processes, All Processes, etc.)
Here's what I've done:
- Booted from install disk and completed a permissions repair.
- Booted from install disk and completed a disk repair.
- Restarted the computer.
- Slept on it.
Nothing has worked; any ideas?

Hi, Marc.
Delete the word "Local" from the search field in Activity Monitor's tool bar: click the (X) next to "Local" in the search field and all should be well. There are no processes matching that search term, hence none are shown!
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

W540 + Ultradock: External monitors not showing correct maximum resolution

I have three 20" LCD monitors and the Ultra Dock. I am connecting them as: 1 with VGA, 1 with DisplayPort to DVI cable and 1 with DVI cable.
The ones one the DisplayPort and one with DVI both show a max resolution of 1280x1024 even though the monitor has a native resolution of 1600x1200. The VGA connected monitor shows the correct maximum resolution.
When I connect the DVI cable to into the mini-displayport connection on the laptop itself, that same monitor shows the proper 1600x1200 resolution.
Is there some limitation here preventing me from using the full 1600x1200 resolution through the dock?
Solved!
Go to Solution.

Solved!
My dock already had the same version as the update file. Plus, the description of item fixed did not match my issue. I had no blinking or missing screens, I had too low of resolution.
...But I have found the solution on my own.
Surprisingly I have not see it discussed anywhere on this forum. I found the answer here:
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/gjde49ww.txt
It contains the following information:
In Standard mode, all dock displays uses Integrated Graphics as display output
and is limited to a maximum of 3 displays including Computer's LCD.
While in Advanced mode, all dock displays uses Discrete Graphics as display
output and it increases the maximum number of displays to 6 including Computer's LCD.
Also:
ThinkPad W540 (Standard Mode)
Intel HD Graphics
- (Computer's LCD)
- Computer's analog VGA connector
- Computer's DisplayPort connector
- Docking Station's analog VGA connector
- Docking Station's DVI connector(s)
- Docking Station's DisplayPort connector(s)
- Docking Station's HDMI connector
NVIDIA Quadro K2100M or NVIDIA Quadro K1100M
- No display is connected to this display adapter.
ThinkPad W540 (Advanced Mode)
Intel HD Graphics Family
- (Computer's LCD)
- Computer's analog VGA connector
- Computer's DisplayPort connector
NVIDIA Quadro K2100M or NVIDIA Quadro K1100M
- Docking Station's analog VGA connector
- Docking Station's DVI connector(s)
- Docking Station's DisplayPort connector(s)
- Docking Station's HDMI connector
Something about this really prevents the resolution I wanted.
I switched to advanced mode in the BIOS as such:
The procedure below allows user to select "Standard mode" or "Advanced mode"
1. Power off the computer.
2. Power on the computer.
3. While the "To interrupt normal startup, press Enter" message is displayed
at the lower-left area or lower-center area of the screen, press the F1 key.
The ThinkPad Setup menu will be displayed.
4. Choose "Config" then "Display" to show the menu.
5. Select "Video Mode on Dock" and press Enter.
6. Select "Standard" or "Advanced" for your preference
7. Press F10 key and select "Yes" to save and exit from Setup menu. Then the
computer is restarted.
After a few reboots, I have proper resolution on all displays.
Not sure if there are any downsides to advanced mode, but it certainly feels like it is my solution. This gets me back to what just worked fine with the W530 I had before this.

External monitor not showing up

Hi,
I recently bought a Macbook pro 2.4 gHz OS 10.6.4. I am trying to use an external monitor with it. I bought a Mini display to dvi connector. When I connect it, it sees the monitor as my Dell ST2010, but won't display. I now about mirroring and stuff. I'm thinking it might be a bad mini display adaptor, but it sees the monitor name as the Dell. So not sure.
any suggestions?
thanks, Jason

Hi Jason,
First, run all the updates in Software Update and repair permissions.
If that doesn't do it, try an SMC reset:
http://support.apple.com/kb/HT3964

External Monitor not showing.

Good Day All,
I seem to be having problems with setting up my external monitor...
I have a JVC tape deck, I forgot the model, and a SONY TV(forgot the model).
What I did was I used a firewire plugged it to the back of my g5 then onto my tape deck. From my tape deck to my TV.
Then I set my stuff all up in FCP.
1. VIEW> Using FIREWIRED DV PAL
(As a note my FCP recognizes the FIREWIRE becoz when I unplug the firewire the FCP notices and gives a warning)
2. VIEW> Set to ALL FRAMES.
3. Mirrored on Desktop.
And when I Log and Capture I see the footage on the TV and on my monitor and yes I closed the Log and Capture window before i do anything.
I also turned on the tv and the tape deck then i turn on the FCP and it recognizes it.
These equipment I've used before and WAS working, but the office moved so the stuff was moved. But now, nothing i do works...PLS I NEED HELP. I'm Making a presentation so I need my monitor.
Pls and TNX!!!
If it helps... I also have 2 CPU monitors attached to my G5(my secondary and primary).When I set my playback to Digital Main/Secondary they work. I've also tried disconnecting the other monitor incase that hampers the process.
Thank you very much!

Shane's Stock Answer #8: External Monitor Viewing
If you are working with DV, this is simple. First connect your computer to a camera or deck via firewire, Then connect the camera/deck to your TV/Monitor via RCA or S-Video.
Then start up your camera and tv, then open fcp.
Go to the View Menu, choose > External video > all frames
VIEW>Video playback should be Apple firewire NTSC (If you are using an NTSC set)
VIEW>Audio playback should be Audio follows Video
Techinially, this should send synched video to your TV
If for some reason you can't view your timeline on your external monitor, there are a few things to try:
1) Make sure that the camera/deck is connected and powered on BEFORE you open FCP.
2) In the Final Cut Pro menu select AUDIO/VIDEO Preferences and make sure your signal is being sent out thru Firewire DV.
3) Go to the menu and select VIEW>EXTERNAL>ALL FRAMES.
4) Click in the % box above the image and select FIT TO WINDOW.
5) Go to VIEW->refresh A/V devices
6) Make sure the Log & Capture window is closed
If you want it to play in both the canvas and the external monitor you need to go to the FINAL CUT PRO menu and select AUDIO/VIDIO settings and make sure MIRROR ON DESKTOP is selected under the PLAYBACK OUTPUT section.
If you are working with HDV footage, FCP 6 allows you to view this via firewire, but ONLY as downconverted DV. It won't look the best, but you can see it. To do this,
If you need to view any format other than DV at full resolution, then you need to look into capture cards. Several standard definition and high definition models are available from www.aja.com and www.decklink.com. With these options you'll need a proper monitor to view full broadcast colors, but all models allow for realtime standard definition downconvert, allowing you to view HD on an SD monitor.
The Matrox MXO is another option that is output only, but allows you to view your footage on an Apple Cinema Display at full broadcast quality.
Shane

Develop Mode 2nd Monitor not showing edit adjustments

I am using Lightroom 4.1 RC2 on a Windows 7 64 bit system with dual monitors. When I am in the develop mode and make edit adjustments on any setting the 2nd monitor does not update. If I move to another image then come back the image is updated but it does not work in real time. I have never had this problem before and it worked fine in Lightroom V4.0

It's a bug in LR4.1 RC2.
The workaround seems to be to increase the size of the Standard Preview setting (File Handling tab of the Catalog Settings)....go up at least one setting (e.g. if it's currently 1024 change it to 1440 or 1680). No need to recreate your previews, just increasing the setting seems to work in most cases.
You might also, without realising it, be suffering a fairly dramatic memory leak which is also stopped by changing the settings.
For a longer answer, see here:
http://www.lightroomforums.net/showthread.php?15591-Interesting-Problem-with-LR4-1-RC2

Online Monitoring not showing the graph

We are having an issue in online monitoring. In the summary tab, we don't see the Graph's now.
Last week we updated the Hotfix 7.0.6.3 in SAP BCM 7.0. Not sure because of this its causing the issue.
Please provide suggestion to get this resolved?

Hello.
The solution could be again in Client Workstation installation guide
The Scalable Vector Graphics (SVG) plug-in is required for viewing certain reports of the BCM Online Monitoring application.
For IE versions 8.0 and earlier, download the plug-in from the Adobe web site. You may need to restart your browser before viewing SVG graphics.
IE versions 9.0 and 10 include a SVG viewer, and no separate installation is required, but to enable the viewer, make sure that the monitoring site is not in the compatibility mode. Most cases can be corrected by choosing in IE ToolsCompatibility View Settings, and remove the selection Display Intranet Sites in Compatibility View.
Make sure that the mctabuff component is installed on the computer, see Installation of BCM Terminal Components

My 2nd Monitor not showing up as a Video Device in P Pro Preferences- Playback

I'm on P Pro CC (Windows) and want to add my 2nd monitor (a Samsung HDTV via HDMI) for editing. It's all connected, but when I go into Edit->Preferences->Playback, I just see one video device and that's the Adobe TV. It doesn't show a 2nd device. Any ideas on how to get this going so I can use the 2nd monitor to display the program monitor separately? Thanks. (BTW, the computer itself is able to recognize the monitor, because it mirrors the computers display.)

Yeah, you were on the right track. Finally figured it out, and I had my computer display settings for mirror. I changed those to some other setting (can't remember), and then Premiere recognized it as a 2nd monitor. As soon as it worked, I was smacked with the image of video on the new monitor...and that monitor's quality was horrible. So time to return the monitor, and leave dual monitor setup for another day when I have time to research and get a good monitor. Plus all audio got piped into monitors **** speakers...so I will have to sort the audio out when I sort the new monitor out. Another day. Thanks for the reply. Editing that feature I was prepping the last time we spoke on audio quality, 24/96 etc, so thought dual display would give me some more real estate when dealing with clips in the timeline. Next feature, we'll definitely set up editing station properly ahead of time.

Communication Channel Monitoring not showing up Communication Channels

Similar Messages

Maybe you are looking for