Communication channel not visible in RWB

Hello everyone,
I am not able to view the communication channel in RWB. This is a HTTP sender . i have imported it but still it is not visible in RWB. what could be the reason ?
Regards,
Ravi

Hi Ravi,
In PI there are basically two types of adapter, adapter engine based and Integration engine based. Integration engine based adapters are HTTP, XI and IDOC. These adapters can be monitored from ABAP stack means from SXI_MONITOR and adapter engine based can be monitored from RWB. Due to this differentiation you HTTP adatper is not visitble in RWB. But you can monitor it from ABAP stack.
Edited by: Rajhans Abhay on Jan 18, 2012 6:06 AM

Similar Messages

Communication channel not listed in RWB

Hi,
I'm facing a strange problem.
Working on File to IDOC scenario. Suddenly my communication channel has stoppped listing in RWB.
It say 0 channel found. Initially it was not so and I was able to monitor my channel.
Any help on this ?
Vikas

Hi Vikas,
-->In the ID deactivate your File sender communication channel and activate it.
-->also refresh the cache.
Thanks

Message processing not visible in RWB Message monitoring

Hi Experts,
There is an issue where messages are visible at ABAP Stack(SXMB_MONI).But same messages are not visible at RWB Message monitoring Integration server(IE and AE) Level.
Previously adapter status for this scenarios was Inactive in integration directory we taught this could be the issue and made adapter status active in Integration Directory. This did not solve the issue.
When payload is taken and processed from test message tab under RWB-Component monitoring-Integration Engine.
Messages are visible in RWB Message monitoring.
Experts could you please help in finding out what could be the issue,Please let me know if any additional information is required,
Thanks in Advacne,
Seshu.K

There is an issue where messages are visible at ABAP Stack(SXMB_MONI).But same messages are not visible at RWB Message monitoring Integration server(IE and AE) Level.
Check if you have chosen the Status filter as ALL and not "Error".
If you are loking for old messages, then you will not be able to see succesful messages beyond a particular period in the past, since all the succesful messages would have been archived.
To see such messages, you have to choose, the option, show message from "Archive" and not "Database".

Adapter Engine not visible in RWB

Hi Guys,
         I coudnt find the Adapter engine in Component Monitoring and Message monitoring in RWB.
while displaying the components of Integration Engine getting the below error. I am using PI 7.1
Kindly let me know where to check if the components are not visible in RWB.
java.lang.NullPointerException:
     at com.sap.aii.mdt.web.MonitorDynPage.setNewComponent(MonitorDynPage.java:635)
     at com.sap.aii.mdt.web.MonitorDynPage.process_go_button(MonitorDynPage.java:496)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.sapportals.htmlb.page.DynPage.doProcessCurrentEvent(DynPage.java:172)
     at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:102)
     at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:62)
     at com.sapportals.htmlb.page.PageProcessorServlet.doPost(PageProcessorServlet.java:22)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:66)
     at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:32)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:431)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:289)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:376)
     at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:85)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:160)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:67)
     at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
     at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
     at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
     at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:295)
     at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.run(Processor.java:222)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:152)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:247)
With Regards
Pradeep N

Check page 129 of this document:
[SAP XI TroubleShooting Guide|https://websmp109.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000659947&_OBJECT=011000358700005909032005E]

CC not visible in RWB-Communication channel monitoring

Hi All,
Communication channel created in the directory is not visible in
Communication channel monitoring of RWB. I refresh ABAP cache, SXI_CACHE,
CPA cache. Still its not visible. Deleted and created again. Still no use.
None of the communication channels newly created are visible in RWB. Could anyone suggest some ideas to resolve this issue.
Thanks
Ricky

Hi
Just to be sure a basic question to start with : You do activate your channels in the ID after creation ?
Dirk

Error in JMS Communication Channel not raising alert

Processing Errors in JMS Communication Channel are not raising alerts.
The settings on the communication channel retires are set at 3 and 5min interval.
In RWB the JMS communication channel shows processing errors but an alert is not raised.
The alert are configured in our system and we even have a catch all alert rule with * (wildcard). Errors in PI message processing are raising alerts but errors in Comm Channel are not raising alerts.
The message in SXI_MONITOR shows as processed successfully but when we check the RWB and Comm. Channel Monitoring we see processing errors "Channel error occured; detailed error description: JMS error: Connection to the server has been terminated; Linked error: Connection reset, Error Code:null"
Are we missing any configuration? How do we get alerts/notifications if there are errors in Comm. Channel without having to login into RWB and watch it periodically?
Any help is greatly appreciated.
RM

Hi,
What is the staus of Communication channel in RWB when it fails, RED ??if yes then it should genarate alert.
create one more alert for specific to JMS interface and check it out.
Regards,
Raj

Mail Sender Communication channel not polling

Dear all,
In our PI 7.1 Sever, we have observed a issue.
Sender mail communication channel status is green in RWB-->Channel monitoring but the channel does not pick up any mails form the mailbox.
After we stop and then start the channel, it is picking up the mails.
Any pointers on the root casue for this issue and any resolution steps or any SAP Notes to implement will be of great help.
Regards,
Younus

Hi,
Is it like everytime you have to restart the mail channel again and again?
Sometimes it happens, a quick restart will refresh the adapter cache and the messages are processed.
So, its not a problem.
Regards,
Sushama

Communication channel not present in Communication channel monitoring

Hi All,
We have the communication channel in Integration builder and it is active state. but we are not able to see it in C.C monitoring. and we are not sure whether the channels are started.
how can we check whether the channels are started?
and why the communication channel is not visible in C.C monitoring.
It works fine in DEV and QA. but we are facing this issue in PRD

Hi Ravi,
in the cache connectivity test, all the components are in GREEN color (Enterprise Service Repository, Integration directory, Integration server - ABAP, , mapping runtime on central adapter engine, adapter engine, mapping runtime) . Only central adapter engine is in yellow color and the message says:
Apr 19, 2010 6:16:28 AM - Cache notification from Integration Directory received successfully
Attempt to fetch cache data from Integration Directory not yet started or still in process.
Restarting the server also did not work.

Communication channel not working -- No Adapter Registered for this channel

Hi Experts,
I see the status of one of my Communication Channels (In RWB Communication Channel Monitoring) as
"No Adapter Registered for this channel".
I saw one of the threads related to this but could not fins a suitable reason for it as our issue seems to be different here.
We have recently deployed the SFTP adapter and PI team is testing this communication channel and they got this error.
I checked and found that SFTP adapter (in the JAVA EE applications) was not working and when I tried to start ,its giving error
failed to start.
additional status message as
Status Details: Cannot load class "com.advantco.pi.af.adapter.sftp.SPIManagedConnectionFactory". Possible reasons: 1) class file cannot be found in the JARs located in the RAR file,
2) class file cannot be found in referenced loaders,
3) failed to initialize some static block(due to unhandled exception),
4) failed to load or there is incompatibility with some native parts, or
5) cannot load a class related to it, due to some reasons above.
Could you guys suggest from where exactly is it trying to pick up the files.
is it u201Cu2026/j2ee/cluster/apps/xxxxxxx/SFTP Adapteru201D ????
Can anyone suggest the possible reasons and the root cause of it
Regards,
Yogi

Hi Yogi,
i am glad you solved the problem.
If you have any issue with the Advantco SFTP adapter, best is to send an email to "support at advantco.com" directly.
Peter Ha * SAP NetWeaver PI Architect * Advantco International LLC
www.advantco.com

Communication channels not shown in adapter monitoring

Hello everybody,
we got several communication channels running on the same file-adapter.
But in adapter monitoring only ONE communication channels is shown.
The other communication channels are not shown although we expected them at least with an error.
Any ideas?
Thanks a lot
Regards Mario

Hi,
I think, you have chosen the selection criteria only for the Correct one in the Page.. Check with All information in adapter monitoring screen.
Following will be looked once you don't have any adapters are visible..
Check SAP BASIS Content is imported in the IR or not.
Check this thread also-
Problems in adapter monitoring
Regards,
Moorthy
Message was edited by: Krishna Moorthy P
Message was edited by: Krishna Moorthy P

PI 7.1 RFC Communication Channel not found

Hello,
We have recently upgraded to PI 7.1 and I am having a problem getting my RFC adapter to work. This is the error message:
Error when calling an adapter by using the communication channel CC_UDF_RFC_CALL_TO_PI_ABAP (Party: , Service: IS_D06, Object ID: 5873a160602e3be5866ab820596b752c) The channel with object ID 5873a160602e3be5866ab820596b752c could not be found in the Integration Server Java Cache. Check if the channel exists in the Integration Builder Directory and execute a refresh of the Java Cache
I went to SXI_CACHE and refreshed (Delta nad Complete). I can see that the CC exists in integration builder.
How can I determine what is causing this error?
Thanks,
Matt

Also check the cache notification after activating the Comm channel in ID whether cache is properly updating for the changes in the comm channel.
Menu--> Environment --> Cache Notification
If cache notification is proper thentry to refresh CPA cache using following URL and execute ur scenario.
[http://<host>:<port>/CPACache/refresh?mode=full]
Edited by: Samiullah Qureshi on May 14, 2009 8:36 AM

Error in communication channel " not initialized"

Hi All,
I'm working in FIle to mail scenario. In this scenario whenever i upload a text file to the R/3 application server. that file should be sent (as a attachment with a mail) to any email id. I did all the required configuration in IR. but i'm verymuch confused in ID configuration. I have created both sender and receiver communication channel in the same business system which refers a sender (R/3) System.sender communication channel is working fine. but when i activate the receiver communication channel it shows an error "not initialized".
So kindly let me know,
1. Should i use business system for my receiver end?,If so how do i create it?
2. is receiver agreement, receiver determination, interface mapping necessary? If so, how do i configure it? because i'm not using any recever service since i'm sending mail to my mail box.
note:
It would be very helpful if u refer any link to find out the recever determination and interface determination configuration for this type of scenario.
Thanks & Regards,
hari.

Provide us the XML formed after mapping.
make sure that the msg type name is Mail and the name space name is http://sap.com/xi/XI/Mail/30.
regards
krishna

PI sender communication channel not reading files from NFS directory

Hello,
I have a sender communication channel configured to read file from NFS directory which is on ECC server. A program in ECC generates the file and puts it on the ECC server in the output directory. PI sender communication channel is supposed to pickup this file and process it. If I give the NFS path as the source directory, I am getting error: Configured source directory '//Server/DIR/OUT' does not exist. I tried putting '
Server\DIR\OUT' too but same error. Do I have to add the NFS path of ECC into PI as logical path?
Any suggestions?
Thanks,
Sangita

Hello Sangita,
Your ECC server is an external system, therefore you need to activate FTP service in that system and use the transport protocol FTP:
http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
You can use NFS protocol when you have a local directory in XI server.
Best Regards,
.Luis Bernal.

Communication channel not selectable in monitoring

Dear experts,
From SAP 4.6c, I want to send data to XI via RFC adapter. I did the following:
- create an RFC on sap 4.6 with no coding, only parameters;
- import the RFC in the integration repository;
- did the message- and interfacemapping to my outputstructure there;
- configured everything in the integration directory, so comm.channel, send/receiv determination etc.
- on the SAP system, created an abap that fills the parameters for the RFC and calls RFC with destination = XI system.
I created a Sender Comm.channel (from SAP to XI) with adaptertype RFC and set it to Active.
Now, when I look in the Communication Channel Monitoring in the Runtime Workbench, I can not select the CC. I'just does not appear when I press "input help" button. I must e forgetting something but I have no idea what...
Can anybody please help?
Thanks in advance
William

Hi JWD,
Check in your change list whether it is activated or not. If activated you should be able to see.
Regards,
---Satish

Sender JMS Synchronous communication channel not picking up files from JMS

Hello,
One of our Sender JMS synchronous communication channel (used Sync/Async bridge in the module section to make it Synchronous) is not picking up files from JMS system though the channel looks to be active (greeen).
When I am trying to stop the channel, it is giving error as "1 of 1 administered and selected channels have not been stopped", and after this when I start the cannel again it shows green but not picking up any files.
if anyone is haivng any solution for this, please reply back.
Thanks in advance.

Messages available in JMS system? please check queue's if message were there and it is not picking up then some thing wrong with cc.
simple solution create new communication channel with same details and try to use the same.

Communication channel not visible in RWB

Similar Messages

Maybe you are looking for