Communication channel start

Hi Team,
We with 300+ communication channel in our PI 7.11 with Ehp1 based system.
But during all our downtimes, with one step (select all) we are able to stop all communication channels but while bring them online its been very painful as they don't come online properly if i select all to start. So we are selecting few of them and starting ....and it's so until we finish all of them.
So i am looking for Best Know Methods if there is a way to make it easier.
Regards
Sekhar

Hi Sekhar,
You can follow this link:
/people/deepak.shah/blog/2010/03/29/polling-vs-atp-in-sap-pi
http://help.sap.com/saphelp_nw04/helpdata/en/45/06bd029da31122e10000000a11466f/frameset.htm
Follow these steps:
1.> Channel Monitoring window->Right upper side>Availability Time Planning option exists.
2.>Availability Time --->one-time/daily/weekly/monthly these options are present.You can choose as per your need.
3.>Create>Description>Provide the details required.
4.>Communication channels--->add the channels for which you are specifing the timings.
5.>Donot forget to make it Active.
These steps will help you.
Regards,
Nutan

Similar Messages

Issue with updation of communication channel

Hi Experts,
I have configured a JMS to Proxy scenario in XI system. i have changed the "Queue name" parameter in sender communication channel for the JMS adapter. the new Queue name is not being used by the interface.
when i monitor the messages for the this interface, i found that system is still using the Old Queue name.
can you please suggest a way to resolve this issue.
-Kaushik

Hi,
I am not sure if this resolves the issue.
Stop the channel using RWB>Adapter Engine>Communication Channel Monitoring
Identify your JMS sender Communication channel and stop it.
Go to ID and reedit this channel and activate.
Comeback to previous Communication Channel Monitoring check the status of activated Communication Channel (start it if it is still in stopped mode)
- Gujjeti.

Error ORA-03113: end-of-file on communication channel (while starting db)

Hello everybody! :-)
Looks like a need help with Oracle 11gr2 (RHEL 6 x64). Faced with a problem while starting database:
sqlplus / as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Fri Dec 7 01:43:45 2012
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 2538741760 bytes
Fixed Size 2216024 bytes
Variable Size 1828720552 bytes
Database Buffers 687865856 bytes
Redo Buffers 19939328 bytes
Database mounted.
ORA-03113: end-of-file on communication channel
Process ID: 6601
Session ID: 575 Serial number: 5
This is logfile (/u01/app/oracle/diag/rdbms/orcldocs1/orcldocs1/alert/log.xml):
<msg time='2012-12-07T01:52:22.363+04:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
host_id='localhost.localdomain' host_addr='127.0.0.1' module='[email protected] (TNS V1-V3)'
pid='6881'>
<txt>Errors in file /u01/app/oracle/diag/rdbms/orcldocs1/orcldocs1/trace/orcldocs1_ora_6881.trc:
ORA-19809: limit exceeded for recovery files
ORA-19804: cannot reclaim 28496896 bytes disk space from 5218762752 limit
</txt>
</msg>
<msg time='2012-12-07T01:52:22.363+04:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
host_id='localhost.localdomain' host_addr='127.0.0.1' module='[email protected] (TNS V1-V3)'
pid='6881'>
<txt>ARCH: Error 19809 Creating archive log file to '/u01/app/oracle/flash_recovery_area/ORCLDOCS1/archivelog/2012_12_07/o1_mf_1_249_%u_.arc'
</txt>
</msg>
<msg time='2012-12-07T01:52:22.368+04:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
host_id='localhost.localdomain' host_addr='127.0.0.1' module='[email protected] (TNS V1-V3)'
pid='6881'>
<txt>Errors in file /u01/app/oracle/diag/rdbms/orcldocs1/orcldocs1/trace/orcldocs1_ora_6881.trc:
ORA-16038: log 3 sequence# 249 cannot be archived
ORA-19809: limit exceeded for recovery files
ORA-00312: online log 3 thread 1: '/u01/app/oracle/oradata/orcldocs1/redo03.log'
</txt>
</msg>
<msg time='2012-12-07T01:52:22.368+04:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
host_id='localhost.localdomain' host_addr='127.0.0.1' module='[email protected] (TNS V1-V3)'
pid='6881'>
<txt>USER (ospid: 6881): terminating the instance due to error 16038
</txt>
</msg>
<msg time='2012-12-07T01:52:23.540+04:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
host_id='localhost.localdomain' host_addr='127.0.0.1' module='[email protected] (TNS V1-V3)'
pid='6881'>
<txt>Instance terminated by USER, pid = 6881
</txt>
</msg>
How can I resolve it, please advice. Thank you.
Edited by: user9001403 on 06.12.2012 5:58

Hi,
Looks like your archivelog space is exhausted. Increase the db_recovery_file_dest_size size and check.
SQL> show parameter db_recovery
NAME                                 TYPE        VALUE
db_recovery_file_dest                string      /oracle/flash_recovery_area
db_recovery_file_dest_size           big integer 3882MRegards,
Anand.

End-of-file on communication channel error when starting database

Hi All,
I have small problem, when we specify at startup without any pfile, it will go to read spfile,in our case it gives error end-of-file on communication channel.
Can anyone please help me to resolve this issue?
Thank you
Chirag

Oracle unable to spawn job slave processes should not prevent the instance from starting - these are not critical system processes and the instance can function without them (as it can when the job queue is set to zero processes).
The o/s failure message also does not make much sense.. overlapped I/O is Microsoft Windows term for async I/O. This can be used at file I/O level, but is also supported for any other file handle like sockets - thus applicable at the network layer too.
I'm a bit confused to how a PFILE versus a SPFILE startup can cause this. If that is the case, then surely there are something different ito init instance settings that triggers this error?
Can you copy and paste the actual SQL*Plus session (as already requested). Show us startup command (and params) used in SQL*Plus and the resulting messages (and errors displayed) in response to the startup.

Processing Started in JDBC communication Channel?

Dear Friends,
in JDBC Sender Channel i am facing one issue, i.e the data coming from DB but in PI/PO 7.4 data is not reached and channel is showing Green color and log is showing processing started. But as per my experience may the data is locked in server level. PI 7.0 for this type of issues we are deleted the locks in adapter level in visual admin. but 7.4 version is not having Visual Administrator. Please suggest how to resolve this issue in sap pi 7.4?
Note: Previously it is working fine.
please find the screen shots for your reference.
Regards,
Kiran Polani

Dear Friends,
i seen ur answers, but if it is production that is not possible to take restart ther server, for this visual administrator -->adapter locks i deleted db locks previously in pi 7.0 but i need solution for 7.4.
2) http://hostname:port/nwa/locks as suggested by naveeen, for this type of issue dblocks are not available in this url location.
and i have check this also no use and stoped communication channel and started so many times no use and maintained DIsconnect from Database after processing each message in channel level
Regards,
Kiran Polani

Start and stop the Communication channel from Java Mapping

How to start and stop the Communication channel from Java Mapping in XI 3.0
Scenario PI - > MQ -> Third Party web application
Web application is down and then Communication channels are stop manually .
We need to automate this process,
MQ Solution - Trigger will be set in MQ which will be called when web application is stopped
Trigger will send u201CSTOP u201C message to PI
How to configure PI scenario to stop different com channels when this message received ?

check this link: http://help.sap.com/saphelp_nw04/helpdata/EN/45/0c86aab4d14dece10000000a11466f/frameset.htm
make sure that MQ send http request to PI. i dont think a configuration scenario is required in PI. Only roles should be enabled with proper user provided to MQ team.
However, for security reasons, you can configure a scenario if you dont want to expose PI infrastructure directly to 3rd parties.

Communication Channel Stop and Start

Hello everyone,
We are using XI along with MQ for queing messages to our 3rd party logistics. Due to some issues happened in the past, it is decided to stop and restart the MQ channels every weekend. Now the problem is, when the MQ is down, some of the XI communication channels will go down, and will not start automatically, when the MQ bounces back. Now this had created a manual activity every weekend to stop and start all communication channels.
Question is, is there any way we can schedule it as a job to stop and start the channels, at a specific time ?

Hi!
It is possible in scheduling the messages in XI...
1. But before doing this make sure that at what time you want to be schedule ?
2. Is that time will be uniform for every week or else is it may varies ?
3. If Uniform please make schedule or else if it is varying note the difference between those timings I mean
     If your Messages are flowing for every Tuesday and also every Thursday...., etc..
4. You can schedule what ever may be the time it is suppose if those timings are varying weekly once a
     day but in that single day or next day if it was more than once..then better scheduling the
      communication channels to be start for and to be process for that particular 2 days and remaining days
      it wont work I mean stopping Cc
5. Now when come to process...in scheduling...
a) Click RWB>Component Monitoring>Communication Channel monitoiing
b) Right side u can check Availability TIme planning option click that..a seperate window will opens
    THere u can observe these options..
c) also u can see the log
I hope it will be useful to you...
Availability plan--> ONCE /DIALY / WEEKLY/ MONTHLY based on your req select any one...
Create: to create the scheduling...
change: to change the existing one
Save: to save
Reset if u want toreset alll
Delete and copy also as u know these..
While creating you can again see these options 3 main TABS
details: --> Corresponding details
CC: select ur chanel
OPTION 2
In XI 3.O you can directly do scheduling there after selecting the radio button of any Comunication channel and there adjacent to Audit log u can see availability time plan other than rt side top corder..
I hope it will be useful to u
Regards
Amar Srinivas Eli

Scheduled Stop and Start all PI communication channels

Hi,
Is there a way to Schedule Stop all PI communication channels at perticular time and start back at pertuclar date and time?
or is it only a munual way? stop all sender communication channels? if so, how do i keep track of the channels proprties details? like automatic control, external control off etc?
Thanks.
Prema

Hi Prema,
You may try the below steps to start and start the channels automatically.
1> Open page http://<<hostname>>:<<portnumber>>/mdt/channelmonitorservlet
2> click on "Availability Time Planning" on right top of your page.
3> click on create. Fill up the requied details. Please note the below example is for the channel for which I want to be up only from Monday to Saturday and for only one hour on these days from 11AM to 12PM.
Go to "communication channels" tab enter the channel name as below and it will select the channels for which you want this schedule to work.
Activate this and in communication channel make sure that these channels are in "automatic control". You may do further trial on this and it should serve your purpose if your system has fixed start downtime and fixed start up time.

Stop and Start Communication Channels

Hi All,
I am finding some peculiar entries in my application log which has made my scenario go awry.
I have an AS2 to Proxy scenario. I am receiving the AS2 message successfully and i have to send a synchronous signed MDN back to the sender. I have done the necessary configurations for this and all certificates are loaded and verified.
The strange part is, once i receive the AS2 message and convert it to XML using content conversion, the communication channel is stopped and again restarted. This messages i could find in application log Log entries. This makes the MDN Asynchronous as the existing HTTPS connection with AS2 sender is lost and so the MDN is not delivered as ASYNC MDN method is not set up.
I need to know what are the system processes that can start and stop a communication channel. I am sure i have not set up any availability time planning for these comm channels and also, they are scheduled manually!
Thanks,
Rashmi.

Hi Debashish,
I am using Advantco AS2 Adapter, and they say it is one of the system processes and not anything with their AS2 Adapter.
Thats why this question. Are there any system processes that can start/stop a communication channel? Atleast I have not come across anything like that.
Thanks for your reply,
Rashmi.

Starting/Stoping Communication Channel programmatically

Hello Experts,
is there a way to stop/start PI communication channels programmatically?
maybe sending a message to a special interface or smth?
Best Regards,
Artsiom Anichenka

Hello,
You can use Availability Time Planning Tool to schedule a start&stop of desired channels.
http://help.sap.com/saphelp_nw04/helpdata/en/45/06bd029da31122e10000000a11466f/content.htm

Start/stop communication channel

hello,
does anyone know, if there is a way to stop and start a communication channel, other than setting it inactive or active in the integration builder ?
thanks,
Peter

Have to admit I am not much of a ABAP'er not a ABAP WD guy, but my way of building a solution would be;
1. Create a Webservice or ABAP report that can trigger the call to this URL.
2. The URL hit can be a HTTP Post / Get and hence this should be possible both from the ABAP world and from the java world.
I cannot give you the exact means to do it as my knowledge is limited but I don't see any reason as to why this should not be possible, as you just need to trigger a call to this url using Plain HTTP Get / Post.
Regards
Bhavesh

Disabling all communication channels before starting XI

We are mirroring our XI system for DR purposes and I need to work out how to stop XI from retrieving and delivering messages when I start it up. I want to be able start up the DR system on the same network to check that it looks OK, but with all communication channels disabled (or stopped!).
Does anybody know how to do this?
Regards,
Jason

Hello All,
Sorry for opening a topic that is very old but every google search ends up here.
Run the script to set the channels to “STOPPED” state:
update [<SID>].[SAP<SID>DB].[XI_AF_ADM_STATE] set ACTIVATION_STATE = 'STOPPED';
This the script below will set the History of the communication channels to STOPPED:
update [<SID>].[SAP<SID>DB].[XI_AF_ADM_STATEHIS] set ACTIVATION_STATE = 'STOPPED';
This will set the automatic scheduled communication channels schedule to disabled:
update [<SID>].[SAP<SID>DB].[[XI_AF_ADM_SCHEDULE] set ENABLED = '0';
Next for disabling new incoming messages. Disable the Integration Engine (Set ENTRY LOCK to 1):
if exists (select * from <SID>.<sid>.[SXMSCONFVL] where CLIENT = '200' and AREA = 'RUNTIME' and PARAM = 'ENTRY_LOCK')
update <SID>.<sid>.[SXMSCONFVL] set VALUE = '0' where CLIENT = '200' and AREA = 'RUNTIME' and PARAM = 'ENTRY_LOCK';
else
insert into <SID>.<sid>.[SXMSCONFVL] (CLIENT, AREA, PARAM, SUBPARAM, GENERIC, VALUE, CHGTSTAMP, CHGUSER)
VALUES ('200', 'RUNTIME', 'ENTRY_LOCK', '', '0', '1', '20131206011316.8280000', 'DDIC');
The following will disable the abap RFC's:
update [SID].[sid].[RFCDES] set RFCOPTIONS = REPLACE(RFCOPTIONS,'N=','N=#') where RFCTYPE = 'T';
update [SID].[sid].[RFCDES] set RFCOPTIONS = REPLACE(RFCOPTIONS,'H=','H=#') where RFCTYPE = '3';
Replace <SID> with the sap<sid>.
Keep in mind that the mail is still being send out when you start SAP.
To active the Integration Server for incoming messages:
f you have locked the Integration Server for incoming messages, open it by calling the transaction Integration Engine - Administration (SXMB_ADM) and choosing Integration Engine Configuration Specific Configuration Change New Entries . Select the category RUNTIME and then the parameter ENTRY LOCK: Set the current value to 0 (NOT LOCKED) and choose Save
The message in the queues are still being processed.
For the full Start/Stop procedure check:
Starting and Stopping - Administering PI (Process Integration) - SAP Library
Greets,
Stan

Is Activation required after Starting communication channels.

HI Guys,
this is the scenario, i stoped some <b>active</b> communication channels from RWB due to some maintanance issues. after some time i need to start them again, now do i need to activate the communication channels again in ID..?
as there are many communication channels involved activating all of them would take more time than the given time so iam bit bothered.
please advice..
Regards,
Raj

Hi,
>>>this is the scenario, i stoped some active communication channels from RWB due to some maintanance issues. after some time i need to start them again, now do i need to activate the communication channels again in ID..?
NO
Regards
Agasthuri Doss

Open and close communication channel in one link

Hello,
I implement with successful the scenario that described in this blog:
Control Communication Channels Externally without using RWB
Right now I use with this link to start the CC
http://aaaa:50000/AdapterFramework/ChannelAdminServlet?party=*&service=Open_Friday_Service_Sender&channel=Open_Friday_Sender&action=start
And with this link to stop the CC
http://aaaa:50000/AdapterFramework/ChannelAdminServlet?party=*&service=Open_Friday_Service_Sender&channel=Open_Friday_Sender&action=stop
I looking for the way to start and stop the communication channel in one link.
Elad

hi elan
i think you need to write an abap program and schedule it..
abap program will call this HTTP link as The URL has no dependency on where it is called.
regards
kummari

One communication channel with 2 cluster node functioning at the same time

Hi Gurus,
We have PI 7.1 installed in a HA environment, which includes two servers.
server A: ASCSSCSDBERSAAS
server B: ERS + PAS
and we can see a jdbc channel in the communication channel monitoring, and along with the CC there are two cluster ID available,both of which are showing green -- functioning.
now the issue is the process is actually not started because there is no processing details, and when we stop the CC and then start, nothing happens, but there are still 2 green nights, seems very strange.
does any one have such experience and how can make these two nodes work well?
Thanks.

Probably they use an older version of alsa that doesn't have dmix enabled by default.
Have a read through: http://gentoo-wiki.com/HOWTO_ALSA_Compl … ix%29#dmix
Perhaps it will help.

Communication channel start

Similar Messages

Maybe you are looking for