Communication Channel status successful but file Not Delivered.

Hi All
I have a receiver communication channel which is showing status as SUCCESSFUL but the log says The message status was set to NDLV. Due to which am unable to retrigger it even form Message Monitoring
Its set to FTP & is not received at that side.
Kindly put in your inputs on the possible solution for this issue.
Regards
Soumen!!!

I dont think it is held in queue.....you will get an error (the one which you got) and then the message will go into Error state.
When the channels are stopped and it receives a file it raises an error alert and is set to error state. Later when channel is started the file gets processed(You can try doing it.I did). Here it gave the error message but sets the channel to successful. Thats what is botehring me.
Looks like you are scheduling the receiver channel....why?
Had some requirement...
@ Balaji : Its successful

Similar Messages

Communication Channel Status Is Shwoing RedLed(Error)

Hi,
I used File Adapter in my communication channels that is FTP ... scenario is working fine.. but in the RWB- Communication Channel Monitoring the Communication cHannel is showing RedLed(ERROR Status)
The FTP server was running on UNIX.. that is Bourne Shell ... If the file is there in the source directory it was processing successfully.. even though the remaing all the time it was throwing the following Error Mesage in the RWB-Communication Channel Monitoring..
Could not process file 'SIMS-10.xml: No such file or directory': com.sap.exception.standard.SAPIllegalArgumentException: The parameter "argument" has the value "ftp://10.25.10.6:21./SIMS-10.xml: No such file or directory", so it contains the character "ftp://10.25.10.6:21./SIMS-10*.xml: No such file or directory" which is not allowed
Please Suggest me.
Regards
Jain

Hi ,
We are polling a particular FTP site for files. If file is found communication channel is showing green led with no error message, but when file is not found it is showing red led with an error message in RWB .
My concern :
1. We applied the same approach in other scenarios also , but never came across this type of situation. In other cases if file is not found, communication channel is not showing red led and error message , so this is a metter of real concern to me.
2. I believe that if communication channel is showing red led then definately alerts will get triggered for any error in adapter engine . correct me if wrong ...?
the only difference i found is the shell on which FTP site is configured...We are getting error in bourne shell but no errors in Korn shell ,,,Our XI box is on HP-UX but FTP site is on Solaris 2.8
Is it a bug In PI 7.0 ....?or Something is missing from FTP site ? or some configuration missing at configuration channel level.
Regards

BIC Module Error in Sender Communication channel for EDI to File scenario.

Hi Experts,
We are working on the EDI based scenarion where EDI files come to SAP PI from partner and then through Split 997 Adapter Func Ack is sent back to the Partner . But we are facing a issue in our sender Communication Channel which is a File Adapter Channel and uses BIC Module for the conversion of EDI to XML .Request if any one can provide any guidance on the below issue coming in sender CC.
Error: Error in BICMODULE-module:Temporary error: BIC XI Adapter call failed. Reason: 2 errors occured. First error: EdiSegmentData read(): Edifact Format not correct : segment must end with \"segment delimiter\" (Segment : ISA). DESCRIPTION: EdiSegmentData Error: Your Edifact Format is incorrect the segment must end with \"segment delimiter\". check segment [not specified]. Last error: InhouseDocReader moveNext(): com.seeburger.jucon.dochandler.AnsiX12DocReader, offset[92(read Segment : ISA)]: could not parse segment (wrong format): EdiSegmentData: Edifact Format not correct : segment must end with "segment delimiter" (Segment : ISA) DESCRIPTION: InhouseDocReader Error: [not specified] at position [not specified] could not parse the segment [not specified] Error while reading description - wrong format.
Thanks & Regards,
Abhishek

Hi Abhishek,
Is there any special character present in the EDI file?
the parser is not able to parse the data.
you can check the BIC conversion log for more information.
Regards,
Harish

How to find which communication channel is picking the file

Hi
Can any one tell me, how can i find which communication channel is picking the file from the source directory?
I have a file scenario. File is coming to directory but it disappears even after I STOP the communication channel, I am using for this scenario
I want to find out which communication channel is picking the file.
How can i do it?

Hi,
you can try this:
Go to Communication Channel monitoring in Runtime Workbench.
Select all file adapters and check cluster node for each Channel. If the file is picked by the channel you will see processing details or errors related to channel here.
Since as you say the message is not seen in sxmb_moni then the communicaition channel would be red. Files that are picked from directories but not visible in sxmb_moni are usually in error at channel level.
Hope this helps.
Regards,

Problem in Background Job. Job Completed Successfully but data not Posted

Hi All,
There is a problem in Background Job in Production server (600).
The job completed successfully but data not posted.
The same Job was working perfectly till the starting of the May month.
but now it is not working and rebate has not been posted.
Where to check and what to check
Pls suggest.
Regards,
P Kamal

Hi ,
Please first check the status of the Job , ifs successfully completed then debug it (tcode JDBG) and
check out, whether the values passed (might be using Import-export ,set-get parameter Ids) to the Job are getting passed properly or not. These values might not be getting passed properly.
If it has some error in Job Log then let me know the error.
Regards,
Uma

Bootstrap success but Synchronization not worked yet

bootstrap success but Synchronization not worked yet
this is i got in ActiveChgImp.trc
Trace Log Started at Wed Jul 19 12:59:34 EEST 2006
Initialized debug!!
Set retry Count!!
Set Scheduling Interval!!
Initialised src connector
Initialized Src Connector.
TAG FOUND:(INTERFACEDETAILS)
LINE,11:(Package: gsi)
key:(Package)
Value Continuation Not Present
Putting Key into Hash :PACKAGE
LINE,22:(Reader: ActiveChgReader)
key:(Reader)
Value Continuation Not Present
Putting Key into Hash :READER
LINE,31:(SkipErrorToSyncNextChange: false)
key:(SkipErrorToSyncNextChange)
Value Continuation Not Present
Putting Key into Hash :SKIPERRORTOSYNCNEXTCHANGE
LINE,19:(SearchDeltaSize: 500)
key:(SearchDeltaSize)
Value Continuation Not Present
Putting Key into Hash :SEARCHDELTASIZE
SkipErrorToSyncNextchange is set to: false
Search Delta Size set to: 500
Initialized Config Info.
Initialized Provisioning Related Details
Initialized Sync Mode.
Mapping init successful
Initialized Mapping Info.
Initialized Filter Info.
Initialized Execution Cmd.
Initialized Status Attrs.
LDAP URL : (tampro.Twa.com:389 [email protected]
Specifying binary attributes: mpegvideo objectguid objectsid guid usercertificate orclodipcondirlastappliedchgnum
LDAP Connection success
Applied ChangeNum : 1295771Available chg num = 700
Applied ChangeNum : 1295771Available chg num = 1295813
and then run the server but Synchronization not worked yet

hi,
I used ldapmodify to modify "SkipErrorToSyncNextChange=true",but show errors,following:
LDAP URL : (davidliu:11712 cn=Directory Manager
Specifying binary attributes: mpegvideo objectguid objectsid guid usercertificate orclodipcondirlastappliedchgnum
LDAP Connection success
testsunone:Error in Mapping EngineODIException: DIP_GEN_INITIALIZATION_EXCEPTION
ODIException: DIP_GEN_INITIALIZATION_EXCEPTION
     at oracle.ldap.odip.util.DirUtils.getLastChgNum(DirUtils.java:48)
     at oracle.ldap.odip.gsi.LDAPReader.initAvailableChgKey(LDAPReader.java:751)
     at oracle.ldap.odip.gsi.LDAPReader.initialise(LDAPReader.java:235)
     at oracle.ldap.odip.engine.AgentThread.mapInitialise(AgentThread.java:351)
     at oracle.ldap.odip.engine.AgentThread.execMapping(AgentThread.java:277)
     at oracle.ldap.odip.engine.AgentThread.run(AgentThread.java:165)
testsunone:about to Update exec status
Error in proxy connection : java.lang.NullPointerException
so,according to the Solution of way, I used ldapmodify to fix the following one entrie:
dn: orclODIPAgentName=testsunone,cn=subscriber profile, cn=changelog subscriber, cn=oracle internet directory
changetype: modify
replace: orclaci
orclaci: access to attr = (*) by group="cn=odisgroup,cn=odi,cn=oracle
internet directory" (read,write,search,compare)
orclaci: access to entry by group="cn=odisgroup,cn=odi,cn=oracle
internet directory" (browse,proxy)
but it's looks like not success,also show "DIP_GEN_INITIALIZATION_EXCEPTION" error.
why? anybody can help me,please! thank advance.
I used the oracle portal_wireless_101200 and the SunONE Directory Server 5.2.
Regards.
david

I have downloaded the latest Adobe Flash - it says successful but will not work. It says to 'Manage Plug-ins but the Plug-in says it is enabled but it will not work at all. I have tried disabling and then enabling - no success.

I have downloaded the latest Adobe Flash - it says successful but will not work. It says to 'Manage Plug-ins but the Plug-in says it is enabled but it will not work at all. I have tried disabling and then enabling - no success. Please help!

There's two different versions of Flash. The ActiveX version for IE, and the Plugin version for other browsers. Did you install the correct version? This forum's software doesn't thing that Flash is installed for Firefox or the Plugin is disabled.
1.Download the Flash setup file from here: 
[http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe Adobe Flash - Plugin version]. 
Save it to your Desktop. 
2. Close Firefox using File > Exit 
then check the Task Manager > Processes tab to make sure '''firefox.exe''' is closed, 
{XP: Ctrl+Alt+Del, Vista: Shift+Ctrl+ESC = Processes tab}
3. Then run the Flash setup file from your Desktop.
4. Start Firefox and test your installation here: https://www.adobe.com/software/flash/about/
* On Vista and Windows 7 you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). 
See this: 
[http://vistasupport.mvps.org/run_as_administrator.htm]

When i try to send a message to more than 1 person it tries to go out and comes up in the blue box but is not delivered?

When I try to send a message to more than one person it tries to go out and comes up in the blue box but is not delivered. I phone 4s?

Hello blee136,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Troubleshooting Messages
http://support.apple.com/kb/TS2755
Best of luck,
Mario

XI Communication Channel Status sent to email/ccms

Hi,
We need to get an alert via email/sms whenever our XI Communication Channel Status got an errors (RED) or got inactive (YELLOW). Please shed some light on this. Thanks.
Regards,
Raquel

Hi Raquel,
Let me try to clear out some things in this thread . First of all you do your alert configuration which you say you have already done. Thats good . Now you ask that you want only to monitor the communication channels and you want specific guide . Here is the specific guide.
If you have configured alerts you will know that when you create an alert rule you have the option to choose radio button where did the error occur it could be no restriction , integration engine or adapter engine. You need to choose adapter engine.
Now whenever the colour of the lights change to red. You will get your alerts.
Regards
joel
Edited by: joel trinidade on Apr 9, 2009 9:41 AM

TS2755 iMessage but will not deliver!?

I have my iMessage is turned on in settings, I am signed into my Apple ID, I am connected to 3g network or wifi, however iMessage will start sending, but will not deliver.. ever, it will just keep 'sending' but won't deliver.... need help!!?

iOS: Troubleshooting Messages
Have you tried when connected to another network?

Mail Activity but mail not delivered

Mail 5.0, Lion
I see Mail Activity (10 messages) but mail not delivered. This repeats at check mail intervals.
It was working fine - and now it doesn't.
Any thoughts?
Kind Regards
Hugh

Me too suddenly stop sending or recieving any of yahoo messeges first on my Macbook pro then i enabled the keychain for sync in my mobileMe then it comes to my iMac ,,,, same issue,

App testing phase: Push notifications are not getting delivered to certain devices (iphone 4S/ios7.0.4 and ios7.0.3 - Push never worked for these two devices for this app). Received OK responses from Apple PUSH services, but notifications not delivered

We are testing an app at work and Push notifications are not getting delivered to certain devices (iphone 4S/ios7.0.4 and ios7.0.3 - Push never worked for these two devices for this app). Received OK responses from Apple PUSH services, but notifications not delivered to these tow devices.
PUSH notification were delivered to some of the other iOS devices: (iPhone5 / iOS 6.1.4 and iPhone5 / iOS 7.0.3)

Sounds like you have a battry issue but don't want to believe it.
If a car was running fine on one tank of gas, then you filled it up with another tank of gas and it began to run funny, one might suspect that tank of gas. But let's just say coincidence blew a valve-- would you think the new tank of gas was the culprit?
BUT WAIT!! It just might have been! The gas could have been of higher octane and put more more strain on the valves; you know, like going from 87 octane (OS6) to 93 octane (OS7) and showing you the engine was on the edge of compromise.
Sometimes you have to go with common sense. If everything else is ruled out, it must be the battery. And if it runs fine one moment in OS6 but immediately ***** in OS7, I'd believe my battery was suspect-- though comfy-- in OS6 but the OS7 showed its true power.
Moreover, if you had the answer-- or didn't want to believe someone's more competent advice-- why did you even call? You've already shown that you don't know much when you asked if you could go backwards after setting up the new OS as a new phone.
Additonally, if you're such the know-it-all, but yourself the $29 battery and put it in yourself. It's a piece of cake.
<Edited By Host>

Mail to File Integration(Mail Sender Communication channel status RED)

Hi all,
I am doing Email to File Integration Scenario, XI is reading mails from an particular exchange server mail id & putting it in to a file. now all IR & ID configuration is done.
But in RuntimeW Bench -> Adapter Monitreing The Sender Mail Communication Channel is RED with error occured: exception caught during processing mail message; java.io.IOException: invalid IMAP status response; not finding * STATUS, but 00KC NO The requested item could not be found

We check the Exchange Server login Acess through TELNET ,as suggested from SAP Service marketplace
and login is successfull, with details available of Inbox
but in TENET when we try to execute the IMAP Status command error message comes
" expected space not found" .
Since XI is not able to read the inbox mail, so Sxmb_moni is blank.....
can any body suggest that this issus is related to that IMAP Status..........or some thing else..
our URL is correct.
Regards,
Ashutosh

the URL path was wrong...
it should end with .......exchange/Inbox/
the sender channel was having error RED ,but it was showing green status intially because delay update .....
Regards
Ashutosh

Communication Channel in SXI_CACHE but not in RWB

Hi Gurus,
Created a simple file to file scenario. While testing the scenario, i've got the following error while looking at the SXMB_MONI.
"com.sap.aii.af.ra.ms.api.ConfigException: ConfigException in XI protocol handler. Failed to get a receiver channel from the agreement for the given message. Root cause: com.sap.aii.af.service.cpa.impl.exception.CPALookupException: Channel object with Id Channel:ca8f9060afd235e7b77958ffc1bb2096 not available in CPA Cache"
Did an initial investigation and found that the communication channel exist in SXI_CACHE. Proceed to do a Complete Cache Refresh. However, I still get the same error.
Went to RWB to check on the Communication Channel under Adapter Tab and realised that the Communcation Channel created cannot be found in the list. I suspect that might be causing the error and Im really puzzled by the mis-match between SXI_CACHE and RWB. Is there a way to refresh the list of Communcation Channels in RWB.
Thanks

Hi Jason,
For this kind of problem i think better restart the XI server then check out .
I hope it would get resolve .
regards
ashwin

OS command working but file not moved

HI All,
I am facing an issue with receiver File adapter OS command.
OS command will move file from folder A to B and after remove
It was working previously fine.But now it is not moving file.
In CC logs it is showing as successfull ececution of OS command.
I have checked the folder authorisations and they have not changed....
Any inputs regarding this issue??
Regards.

Hi kiran,
although you ave checke authorization, I gues it has something to to with this.
Is the user in communication channel still autorized?
Try to logOn with an FTP-Client an this user an PW on the relevant folders.
Or could it be that a file with the same filename already extist an the folder is not allowed to overwrite?
Regards
Mario

Communication Channel status successful but file Not Delivered.

Similar Messages

Maybe you are looking for