Communication channels are not exist in Runtime workbench

Hi gurus,
I did one file to file scenario. I have two problems.
1. I have created communication channel in the configuration step. I have activated my scenerio too. But when i check the communication channels in the runtime workbench im unable to see my communication channel. My communication channel doesnotexist.
2. How can i create the source directory and target directory
Kindly help me solve this problem.
Regards,
Ramalakshmi.G

Hi
Cache refresh : SXI_CACHE
Creating Source / Target Directory : U can use folder within XI landscape for (NFS)
If u r using FTP create folder in the FTP Server and use those : but select FTP as transport protocol
u will be asked for ftp ip / username / password
rgds
srini

Similar Messages

  • Message Interface and Communication Channel are not getting in RW B

    Hi
    I have created a sceario in which i have created following things
    2 - External Definition of Same XSD
    2 - Data Types
    2 - Message Types
    4 - Message Interfaces
    2 - XSLT mappings
    2 - Interface Mapping
    I have created on two scenario objects in XI ID.
    But In RWB i can see only one sceario message interfaces and communication channels but the for other scenario MIs and Communication channels are not visible in RWB
    I have created all the things in only one Namespace.
    What could be the problem .please help me
    Regards

    Hi,
    Have you activated it?
    Can you see it in SXI_CACHE?
    If one is no please run report SAI_CACHE_REFRESH
    Kind regards,
    Wojciech

  • Communication channel doesn't show in runtime workbench

    Hi,
    In Integration monitoring Runtime Workbench does not show communication channel list in communication channel monitoring. It shows empty but we have created lot of communication channels. This is problem in XI adapter or any other problem? Please can anyone tell the solution for that.
    Regards
    Vijay

    Hi,
    If ur searching for Xi and Receiver IDOC adapter in RWB.U cant find them in RWB then run in IS.try to check ur sender adapter and u can find the complete flow of it.
    Thanks and Regards,
    Phani Kumar

  • "The source and output audio channels are not compatible or a conversion does not exist" - ?

    I'm trying to export from Premiere Pro for a f4v file that matches all source settings except resizing the video. I've done this a million times but today, when I hit EXPORT, I'm getting an error message from Adobe Media Encoder that says "the source and output audio channels are not compatible or a conversion does not exist." I'm using wav, mov and mts files in my audio tracks and everything plays happily in the timeline. Any ideas?
    Thanks for any help!

    Sounds like you unsuccessfully trying to output a 5.1 Master to a stereo or mono file.  Or something along those lines.

  • Comm Channels are not seen in the Communication Channel Monitoring in RWB

    Hello All,
    I am facing a strange Problem. In the RWB i am not able to see the Comm Channels that i have configured in the Integration Directory. In the Adapter Monitoring also I am not able to see the Adapters with Green Status.
    I am on PI 7.0 and SP9. For a simple IDOC to File Scenario, the IDOC is getting sent but the File is not getting written. I have to monitor it for this. As the Comm Channels are not showing so I am not able to Montitor.
    Can anyone please suggest me how to do this montoring and how can I see the Comm Channels that I have created.
    Thanks in Anticipation
    Best Regards
    Chakra and Somnath

    Hi,
    1. Check created the Busieness system to identify your XI System.
      Role of Business system : Integration Server
      Pipleline : http://<hostname>:<ICM Port>/sap/xi/engine?type=entry. 
    2.  In XI Tcode : SXMB_ADM
      Role of Business system : Integration Server
      Pipleline : http://<hostname>:<ICM Port>/sap/xi/engine?type=entry.
    3. Go to SXMB_ADM
       Execute Integration Engine and Configuration
       Click on Check button check the SLD working fine or not.
    Regards,
    Venu.

  • Communication Channels do not appear in the monitor

    I have just created a sender and receiver file adapter and activated them. I tested them in a process by dropping a file into the sender directory with a 10 second poll interval. The file is not being processed.
    If I check the corresponding Integration Server Adapter Engine status, there is a green light, BUT When I select the Communication Channel Monitoring button, there are no channels!
    Also, although I have created parties that use these channels, they also do not appear in the filter drop down list.
    Is there some reason why these channels are not appearing?
    Just for clarification; this is on a new XI installation.
    Kind Regards,
    Tony.

    Hi,
    import SAP basis software component into repository
    as per question:
    3. I can't see my adapters in the adater monitoring after the import of a new SP
    on XI FAQ
    for PI 7.0 - sap basis 7.0 for XI 3.0 sap basis 6.40
    Regards,
    michal
    <a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

  • Communication Channel is not working

    I have moved the design and configuration from quality XI server to product XI server. But when I start the Communication Channel in RWB, the LED is green, and I cannot get the log details at log area. The communication Channel is file adapter for FTP. The ftp file cannot be picked up. In fact, communication Channel is not executed. I have check SLD for product, software, business system and Technical system, no error is found. Anyone can tell me the reason about that?

    Li,
    Things to check:
    1. If you have adopted the file based transportation approach then you will loose  configuration channel related data .
    you need to feed the data.
    2. If you have adopted the CMS transportation approach, then case will be different
    a) Try to ping the FTP server from XI Prod Server, it should ping .
    b) If it is showing green it means it is able to locate the FTP server, kindly check the file name once again....
    Let us know the scenario also and also how the scenario is behaving differently
    Note : File Name is case sensitive 1.xml is different from 1.XML
    Regards,

  • Referenced sales org. AA00 and distribution channel do not exist

    Hiii Driends,
    I have came across a problem while Assigning Sales area to Sales doc type.....
    Steps i have followed:
    1. Created and assigned all Enterprise Structure
    2. Set up Sales area (AA00/A1/A0)
    3. IMG-SD-Sales-Sales Doc -Header-Assign Sale Area to Sales Doc type-Combine Sales Organisation. This is done succesfully.
    But while doing 'Combine Distribution Channel' when I enter Ref Dist Chnl as A1, Error is appearing as "Referenced sales org. AA00 and distribution channel do not exist"
    Can u sugest me any solution???
    Regards,
    Abhi

    Hi Abhi,
    If the referenced distribution channel is not assigned to the sales org of sales line which you are trying to refer....Message will be coming as you said...
    Please check whether you are referencing a distribution channel which you have assigned to your sales organization or not...
    Hope this helps you...
    Reward points.
    Regards
    Guru

  • Error : Interface mapping does not exist in runtime Cache

    Hello Guys
    I have a simple SOAP-To-RFC connection which was working fine until recently. I have not made any changes
    but the data is not getting transfered from one point to another.
    I checked SXMB_MONI and saw the following error:
    Interface mapping http://cincom.com/config AddConfig does not exist in runtime cache
    Then I went and checked SXI_CACHE and it says 'Cache contents are upto date' with a green light.
    Just to be on the safer side, I shutdown and restarted XI server selecting All tasks.
    But still has the same problem.
    Can some one help me with this? I would really appreciate it.
    Thanks
    Ram

    Hi,
    We too faced the same problem.
    Do the following
    1) Delete the Interface mapping and re-create it
    2) First test your Config with test tool
    /people/paul.medaille/blog/2005/06/24/test-your-xi-configuration-with-the-new-test-tool
    I think here you will find the error on Interface mapp or Receiver agreement
    Then delete the interface det and receiver agreement also and re-create those.
    Make sure that u have provided the sample payload which is taken from MONI--Inbound msg--Payload
    Then finally u will get the success
    Regards
    Seshagiri

  • "The selected communication device does not exist"

    Whenever I log on (or come out of sleeping), I get a prompt box from Internet Connnect that says "The selected communication device does not exist. Please verify your setting and try again". I think this started to happen when I stopped using a USB modem to access the internet. Recently I was again using a (different) USB modem, and when I stopped (I now have a wireless router), I now get TWO of the above alerts!
    To be clear - I have no problem accessing and using the internet with the wirelss router I am using.
    Is there a way of deleting historical communication devices I no longer use from Internet Connect that might stop this from happening?
    Thanks in advance.
    G4 iBook   Mac OS X (10.4.8)  

    Hello Dunstan,
    I wonder if this might have something to do with Location and Network settings.
    I'd go to System Preferences/Network and, choosing the location that you are using, select the "modem" tab. On the presumption that, because you are now using wireless router and that your computer is no longer using its built-in modem, I'd delete all settings under "modem".
    Then I'd open Internet Connect and see what crops up when you click on the Modem tab. It should be blank. If it is not, I'd close Intertet Connect, then go to My User Folder/Library/Preferences, and there move the following file to the Desktop: com.apple.internetconnect.plist. Open Internet Connect again.
    There are other things that can be done, especially in the Locations settings. However, I'd try the above first.
    Best of luck,
    Martin
    If you found that this contribution helped to answer your question, please consider the "Helpful" and "Solved" buttons in this message. Why reward points?
    Powerbook 15-inch G4 1GHz   Mac OS X (10.4.8)   Several veterans that go on and on. 40gig, 3rd generation iPod

  • Interface mapping Object does not exist in runtime cache

    I am getting the following error after importing IR into our test system (PI7.0 SP10).
    Interface mapping Object ID 19C3AC9D13B03787AEEB85169D0B6900 Software Component 8C51B2209F3C11DB94CEEB180DDF0074 does not exist in runtime cache Exception of class CX_XMS_SYSERR_MAPPING
    You want to execute interface mapping Object ID 19C3AC9D13B03787AEEB85169D0B6900 Software Component 8C51B2209F3C11DB94CEEB180DDF0074 .     However,the data of this interface mapping is missing in the runtime cache. Activate the interface mapping in the Integration Repository.
    I cannot change the mapping and reactivate - as this cannot be changed.
    I have run SXI_Cache, Cleared SLD caches on IR and ID and run cacherefresh=full, but no luck!
    The mapping is there and I can test it in the IR.
    Any thoughts?

    I had this problem today, maybe this helps someone when searching about this (at least this is the first hit at a very big search engine when searching for interface mapping does not exist...)
    I have a RFC => PI => File scenario. I was aware that this would need to be asynchronous so I set up the message interface (service interface for PI > 7.0) as asynchronous inbound. This is the file receiver part of the interface.
    Hints on the error: Audit Log in message details of RWB showed a line like this: RFC adapter received sRFC for ZMY_FM from <sender SID>/<sender client>. Attempting to send message synchronously. This of course could not work as file is asynchronous by default.
    Bottom line however was, to make the call of the sender RFC asynchronous by using "in background task" like so:
    CALL FUNCTION 'ZMY_FM'
       IN BACKGROUND TASK
       DESTINATION 'PI_DEST'
       EXPORTING
         t_file = lt_file.
    COMMIT WORK.
    Don't forget the commit work here.
    Hope this helps.
    Cheers
    Jens

  • Spool numbers are not exist in TBTCP table but can be visible at SP01 trans

    HI folks,
                    I could see four spool errors in SP01 transaction .But i couldn't able to find which job/program had generated that spool. I have checked TBTCP table also..but those spool numbers are not exist in that table.
    Can any one please help me on this.

    Hi Manj,
    There is no error in SP01 tcode.
    You need to check the tables TSP01 and so on and find the sppol numbers and then the user name and the times generated.
    It works with a different mechanism.it's a RDBMS Concept and normalisation.
    you can even use the FM RSPO_FIND_SPOOL_REQUESTS. or look for FMS RSPO* and explore.

  • Procedure require in DB:i want insert records in temp table(if that records are not exist in temptable)

    i have one "LOGTABLE"  having 3000 records, in this table daily 3-4 records will be inserted.this table have 11colums no primary key columns.
    i created another temp table as "LOGTABLEMONITOR". (copied from "LOGTABLE" having 3000 records)
    i am expecting which are inserting daily 3-4 records in "LOGTABLE" will be inserting temp table "LOGTABLEMONITOR" (if that 3-4 records are not exist in "LOGTABLEMONITOR")

    SELECT <columns>
    FROM LOGTABLE
    EXCEPT
    SELECT <columns>
    FROM LOGTABLEMONITOR;
    Best Regards,Uri Dimant SQL Server MVP,
    http://sqlblog.com/blogs/uri_dimant/
    MS SQL optimization: MS SQL Development and Optimization
    MS SQL Consulting:
    Large scale of database and data cleansing
    Remote DBA Services:
    Improves MS SQL Database Performance
    SQL Server Integration Services:
    Business Intelligence

  • XI Communication Channels does not poll

    Hi All,
    XI Communication Channels does not poll
    Does anyone know how to troubleshoot this?
    Actually they should pick the stuff from the SQL server, convert it to Idoc and send it to production BOX.
    Shavali

    Hi,
    Is it a problem with the JDBC adapter?
    If yes, make sure that the channel is active and that it has been started.
    ALso , make sure that the sender JDBC adapter Select Query has some valid data and actually returns some rows!
    Regards
    Bhavesh

  • Interface Mapping does not exist in runtime cache

    Hi,
    I have a scenario of RFC to SOAP, when I do the test I get the error message "Interface mapping http://sapxi.xxx.co.za/XXXXXX/ InterfaceMapping_Name does not exist in runtime cache"
    Regards
    Scharlotte

    Hi...
    Try to re-create the Interface mapping.
    And also test your Configuration with test tool where you can find the error on which step.
    if the error found in interface mapping.. do re-create the interface determination step and receiver agreement.
    Provide the payload which is taken from sxmb_moni --> Inbound msg --> Payload
    u can follow this blog for how to test configuration part:
    Test Your XI Configuration With The New Test Tool
    Regards,
    Parvathy

Maybe you are looking for