Communication channels restart

Hi,
Is there any way that we can start communication channels automatically.
I mean any way to schedule the restart of channels.

Dear Pradeep
I dont think there is automatic Activation of Communication channel. once it is active it will keep polling the files. But if it is inactive state and you want it active without manual intervention, I dont think it is possible.
Experts suggest any other options to active it automatically.
Thanks Prateek for the link. Good to know this
Best Regards
Praveen
Edited by: Praveen Kurni on Aug 6, 2008 12:07 PM

Similar Messages

All Communication Channels stopped or startet when restart of the SAP-PI

is there any way to control the Communication Channels (to be startet or to be stopped during the next SAP-PI system start) while the SAP-PI is not running.
for a special data migration reason, we have stopped all Communication Channels except one Comm.channel.
after finishing the migration and for a backup, we shut down the SAP-PI system.
for the next SAP-PI system start, all of the Communication Channels should be run again.
is there any way to control (to be startet again for the next SAP-PI system start) the Communication Channels while the SAP-PI system is already shut down
or is the only possible way to start the SAP-PI system, and then manually start the needed Communication Channels.

Hi,
If you bring PI server down then all the channels will automatically stop and you can not control these channels when the server is down.You can again start these channels when the server is up and running.....
Regards,
Naveen

Error while creating Communication Channel- No SLD elements of type SAP_XI

Hi Experts,
I am getting an error when i am tring to create an Communication channel for File Adapter .
Error message:
No SLD elements of type SAP_XI Adapter Framework Found.
Could you let me know how to proceed and fix the issue.
Regards
Kiran Kumar.P

Hi Kiran,
Your Adapter Framework is probably not registered in the SLD.... perform the action as follows:
1. In the J2EE administrator tool in cluster - server - services - deploy
stop the J2EE applications:
a. sap.com/com.sap.aii.af.service.cpa.monitor
b. sap.com/com.sap.aii.af.
2. Restart the sap.com/com.sap.aii.af application.
Refer sapnote in chapter 8.2 for more in the link provided below on Trouble shooting.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/bd5950ff-0701-0010-a5bc-86d45fd52283
Also try stop and start of the Java EE application "com.sap.xi.directory".
for more info refer this thread..
SLDAccess set to true, but not available with PI 7.10 SPS 7
Regds,
Pinangshuk.

Error in communication channel in PI 7.1 Server

PI 7.1gives the error shown below when I check the status of the communication channel in the Run Time Workbench. .
Error: com.sap.engine.interfaces.messaging.api.exception.ConfigException: Some of the IS access information is not available. SLDAccess property may be set to true, but SLD is not available.
This occurs after I restart the system , before the restart everything seems to be working fine . This is a vexing problem which is recurring.
I have tried the sap notes
764176
809420
97860
1031321
1117249
1444430
1506101
That includes
1. creating a BS system for the JAVA AS
2. restarting the rwb/adapter/dir/repository etc components
3. releasing locks
4. delayed start of jco etc .
Can anyone suggest a possible solution . would installaing PI 7.1 EHP1 make the SLD problem go away ?
regards
Rajarshi Muhuri

Hello
It is always recomended to run in the latest EHP. Please refer to the following URL's regarding same:
http://service.sap.com/sp-stacks (SAP Support Package Stack information) and
http://service.sap.com/patches (patch information).
SAP note 19466 will also assist here and following the updates please re-test and reply if further help is necessary.
Regards.

Problem with communication channel on receiver side with file adapter

Hi all,
I m doing a scenario of collection of multiple idocs into a file.When i m testing this scenario,i m getting a flag successfully executed in SXMB_MONI.But,my file isn't created in my directory.When i monitor the communication channel in Runtime workbench,it's showing error :<b>Channel has not been correctly initialized and cannot process messages</b> for my receiver file adapter?I am not able to figure out the error.Anybody having idea about this problem.
Regards,
Anoop

Hi Anoop
Check it - File adapter is active ? try to Re-activate the same.
Also do CPACache Refresh.
Still problem, tyr out by restarting the Adapter Engine
Cheers..
Vasu
<i>
Reward Points if found useful **</i>

Time stamp is not getting updated for File Adapter in communication channel

Hi All,
Since yesterday, I am observing that the time stamp of communication channel for File adapter is not gettingupdated some times.
I had to stop and start the communication channel to update the time stamp.Please let me know if anyone has come across such issue or any useful notes on this.I could not find any related notes on Market place.
Regards,
Dinakar

Hi,
This is happening only with one communication channel which is sender in derection.Any reason why it is happening like this?since the restart of the communication channel it is getting update now.I really do not know how to delete/create the communication channels as this was done our PI consultants.Pls guide me.
Regards,
Dinakar

Error in communication channel sender JDBC AS400

The communication channel worked ok, but suddenly they began to give the following error:
Error during database connection to the database URL 'jdbc:as400://10.1.0.254/afildat' using the JDBC driver 'com.ibm.as400.access.AS400JDBCDriver': 'com.sap.aii.adapter.jdbc.sql.DriverManagerException: Cannot establish connection to URL 'jdbc:as400://10.1.0.254/afildat': java.awt.HeadlessException.
The driver was installed again, but error persist.
Thansk

Hi,
This issue is due the Sender JDBC Server got restarted or down, check the server connectivity.
If you found still the issue then Stop & Start the communication channgel once, surely your issue will be resolved immediately.
Regards
Venkat

LMS 3.2 Internal Error in Communication Channel

Hello,
I am having an issue with the DCR in which I get the error "Internal Error in Communication Channel" after trying to edit the credentials of a device.
It started when I tried to add a device to the DCR, with all credentials, and it wouldn't show up in the DCR. I tried this 3x, but no luck. I was eventually able to do so by using the Bulk Import, and having the single device (with all the credentials) in the .csv file.
Now that the device is in the DCR, I need to edit the User Defined Fields - but when I try to, I get the error mentioned above.
I've seen other threads here that talk about multi-server setups, and FQDNs, but I'm not using any of that. I've also noticed that there is a bug ID for it, CSCtd07131, but it says 'release-pending'.
Am I up the creek until an update comes out? (its not just user defined fields, btw, I'm unable to modify any credentials.)
Thanks

When you restart the ciscoworks processes you should always give a couple of minutes and log on when the cpu starts to come down.
If it continues to error when you add or modify you better open a case with the tac.
The bug you mention is only if you have multiple systems with a master and slave DCR
Cheers,
Michel

Ciscoworks -- Intrenal error in communication channel

Hi Netpro Team,
I am getting an error "Intrenal error in communication channel" while editing or adding/deleting snmp credentials
in common services...(LMS-3.x);
We tried restarting the ciscoworks services, but still getting the same problem.
Please help to resolve this problem

Yes, Re-installed should take care of the issue..
However here the links for Patch (CS 3.3 and CS 3.2..apply which ever is applicable)
http://www.cisco.com/cisco/software/cart.html?imageGuId=9EE33249152B32176193349929E47597B46DC3C5&i=rs
http://www.cisco.com/cisco/software/cart.html?imageGuId=0C4F05EB3894563EC7BEC44C3E7D494AC34E9B88&i=rs
Thanks
Afroj

Mail Sender Communication channel not polling

Dear all,
In our PI 7.1 Sever, we have observed a issue.
Sender mail communication channel status is green in RWB-->Channel monitoring but the channel does not pick up any mails form the mailbox.
After we stop and then start the channel, it is picking up the mails.
Any pointers on the root casue for this issue and any resolution steps or any SAP Notes to implement will be of great help.
Regards,
Younus

Hi,
Is it like everytime you have to restart the mail channel again and again?
Sometimes it happens, a quick restart will refresh the adapter cache and the messages are processed.
So, its not a problem.
Regards,
Sushama

Sender Communication Channel Error

Hi all,
iam working on JDBC scenario.For this iam using party and business service.
iam getting following error at jdbc sender communication channel.
Error occurred while sending message: com.sap.aii.af.ra.ms.api.ConfigException: SLDAccess set to true, but not available.
Erlier it worked fine.But now iam getting this problem.
We are having some other channels which r working fine.
any ideas......?
Thanks,
Sreedhar Goud.

1. If you know the user, who having admin rights;
1.Open the VA tool; ex: C:\usr\sap\X67\JC01\j2ee\admin --> click on "go.bat"
2. Click on "New" button ( this is on Logon Dialog box)
3. Enter "Display name"; and select "Direct Connection To a Dispatcher Node".
4. Say "Next"
5. Enter "User Name","Host" and "Port" and Save the data.
6. Select User and click on "Connect"
2. Did you forget the J2EE_ADMIN password? Just follow below steps:
Just follow below steps:
1.Start the Config Tool C:\usr\sap\<SID>\<engine-instance>\j2ee\configtool\configtool.bat
Ex: D:\usr\sap\F02\JC00\j2ee\configtool --> configtool.bat
2. "Switch to configuration mode" for that Click on "Pencil" icon;
3. Click on "Pencil" icon means "Swith to Configuration Edit mode" then say "YES"
4. cluster_data --> server --> cfg --> services -->
click on "Propertysheet com.sap.security.core.ume.service
select properties:
ume.superadmin.activated = True
ume.superadmin.password = <enter password >
then say "OK"
Click on "Pencial ICON.
5. Save & restart Java Engine.
Login with "Administrator"
1. http://<host>:<Port>/useradmin/index.jsp
2. Enter userid / Password as "Administrator / <password>
3. it will ask change password just change it.
Please follow steps one by one. it should resolve your issue.

Sender communication channel stopped after error "Connection Timed Out"

Hi experts,
in our scenario we have an asyncronous sender communication channel with polling every 6 seconds to an external FTP server.
Yesterday evening a "Connection Timed Out" error came.
After this error the polling stopped but channel in communication channel monitoring still remains green.
So status green but no polling.
To solve this problem we stopped and then restarted channel from CC monitoring.
The channel is configured "manually".
The question is: Is it possible to avoid this problem? Maybe there's a parameter in configuration to set?
After a time out error the channel must go on polling, it should not stop. Or it must shows red status.
Thanks
Fabio Boni

HI,
I think PI level is "SAP J2EE Engine 7.00 PatchLevel 109886.44"
Thanks
Fabio

File sender communication channel stop working

Hi Guru,
I have a file sender communication channel. It usually works good. But sometimes it just stop working. And In RWB, it shows no error. If I stop it and restart it in RWB, it immediately works again. This happens once a while. Any ideas?
Thanks,
Meiying

Hi,
option 1--
Do some dummy changes and activate channel and try and perform cache refresh.
If still not working then stop and restart SFTP service,if still no luck then restart JAVA stack
option 2
try to put timeout value in the channel.
Regards.
Mastan

Problem with ORA -03113 End of Communication Channel

Hello,
Oracle Database 10g Release 10.2.0.1.0 - Production
Windows Server 2003 Version V5.2 Service Pack 2
Im having this problem when executing an stored procedure that executes a SQL statement wich has uses db links... I get this end of communication channel error.. so I thought it was a network issue, but all connections are fine.
The thing is that the procedure works fine, but just out of the nothing starts to give that problem, shutting down the database would not correct the problem, only restarting the server will fix the issue temporarily. I checked the dump file related to the process am running and I found this, I think it might be like a memory problem but not sure
Windows thread id: 5632, image: ORACLE.EXE (J002)
*** ACTION NAME:() 2010-09-01 09:18:59.490
*** MODULE NAME:() 2010-09-01 09:18:59.490
*** SERVICE NAME:(SYS$USERS) 2010-09-01 09:18:59.490
*** SESSION ID:(545.34045) 2010-09-01 09:18:59.490
*** 2010-09-01 09:18:59.490
ksedmp: internal or fatal error
ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [_kghalf+478] [PC:0x603BEB04] [ADDR:0x61E26AE8] [UNABLE_TO_WRITE] []
No current SQL statement being executed.
what do you recommend me to try here?

Hi Ogan,
I agree ! Of course we are often obliged to compose with minimal downtime, testing resources, editors, management, time etc.
I have the same problems but keeping the base version is a pain and if you consider 10.2.0.5 you won't have to install many patchsets after this one on the 10gR2 homes/databases. It's a "good" investment if you have to keep the 10gR2 for several years (going to 11g is more difficult than installing a patchset !)
Oracle patchsets are great and well tested and if you pay your Oracle license you pay for that ! The patchsets, patchset updates, support make the difference with the versions you can download "freely" on OTN.
Best regards
Phil

Communication channel not present in Communication channel monitoring

Hi All,
We have the communication channel in Integration builder and it is active state. but we are not able to see it in C.C monitoring. and we are not sure whether the channels are started.
how can we check whether the channels are started?
and why the communication channel is not visible in C.C monitoring.
It works fine in DEV and QA. but we are facing this issue in PRD

Hi Ravi,
in the cache connectivity test, all the components are in GREEN color (Enterprise Service Repository, Integration directory, Integration server - ABAP, , mapping runtime on central adapter engine, adapter engine, mapping runtime) . Only central adapter engine is in yellow color and the message says:
Apr 19, 2010 6:16:28 AM - Cache notification from Integration Directory received successfully
Attempt to fetch cache data from Integration Directory not yet started or still in process.
Restarting the server also did not work.

Communication channels restart

Similar Messages

Maybe you are looking for