Communication error has occurred - Canon PIXMA printer

This was driving me nuts! I tried many of the other ideas offered in these discussions, but nothing worked. Sometimes my Canon PIXMA MP640 WiFi printer would work, usually it wouldn't.  I would get "A communication error has occurred" message on my MacBook Pro (Snow Leopard) and the print job would just stay in the queue until I deleted it. Most of the time I needed  to re-enter the network password at the printer BEFORE EVERY PRINT JOB which was a pain because the password was 10 characters long and I could only dial in each letter one at a time.
If you are having similar trouble, before you do anything CHECK THE WIFI SIGNAL STRENGTH USING THE PRINTER MENUS!  On my model, this was done by going from the Home menu to Settings->Device Settings->LAN Settings->Confirm LAN settings->Print LAN Details.  If the signal strength on the printout shows less than 50%, there is too much interference from other electronics in the area (or the printer is too far from the router).  In my case, the printer was in the next room, i.e., not too far from the router so I knew it had to be EM interference.
At first, my signal strength was showing 36%.  Then I moved the printer into the same room as the wifi router, within 7ft and directly in line of sight of it and it went to 62%. I thought it should be much higher, so I moved the printer to within 4ft and it went to 80%.  Then I unplugged the LCD TV (which was NOT turned on at any time) that was on the counter nearby, and it jumped to 90%.
After months of poking at this problem and finally resigning to the idea that the printer was broken, I tried this and now it works perfectly as long as the TV is unplugged.  I plan on moving the router away from the TV so I won't have to unplug it whenever I print.
Hope this helps!

I've wrestled with this off and on with this printer ever since I got it. Just checked and my signal was at 44%. Guess that could be it!... guess I'll do some relocating of the router, boost the signal or run an ethernet line. Never though the signal being that low would cause this many print errors.
I thought is was just happening when the printer would go to sleep... or not used for a few days.
Thanks!

Similar Messages

  • Canon Pixma displays "A communication error has occurred"

    I have a Macbook Pro running 10.6.8 and a Canon Pixma MG 5220. Both are connected to a Linksys E1000 wireless router. I have had a lot of problems getting this printer to connect wirelessly with my MB. I have searched the internet for answers tirelessly and tried the suggestions that I found; however, nothing has seemed to remedy the problem.
    I have set up the printer according to it's directions step-by-step. Using my CiscoConnect application, I added the printer to my network. I have entered in the network name and password into the printer and it tells me that it is connected. I used the CD that came with the printer to install the necessary drivers and add the printer. I have gone into my System Preferences and added the printer that way. Any time I try to print, the error message "A communication error has occurred" comes up in my printer queue. I have the printer added with the USB connection just fine, but it is irritating to have to get up and connect my laptop when this is a wireless printer. Once I have the USB printer added, I cannot add the printer wirelessly. All I see is "Bonjour Scanner." I have checked the signal strength, and it is fine. I have used the Network Utility to ping the IP address and it is fine as well. What is going on with my printer????

    https://discussions.apple.com/message/21003547#21003547

  • Canon MX340 wireless printer no longer connecting over wireless and coming up with "a communications error has occured"

    I have a Canon MX340 wireless printer and have only recently started having trouble printing over the wireless connection. No settings have changed on my MacBook Pro, the printer, the router or the wifi connection and it is strange how it has just stopped working. I have tried things like restarting the laptop and removing the printer from the laptop and re-adding it. It sometimes seems to work for maybe one print but then it goes back to saying "a communications error has occured", when I try to print again.
    Any help would be great. Thanks

    I had the same MX340 problem.  My printer was working fine over WiFi connection to my Airport Extreme for years and then suddenly, about a month ago, it stopped printing after the first print job.  I can print once and then I have to power-cycle the printer to get it to print another time and then I have to repeat the power-cycle.
    The printer seems to be "forgotten" by the network or lose its connection after the first print job.
    On my MacBookPro 10.6.8 I get the error code 300...yadayadayad... On my iMac 10.5.8 it just says :communications error".
    HERE IS THE FIX - I got it off this link - http://www.techsurvivors.net/forums/index.php?showtopic=24681
    You have to connect to the MX340 using the printer cable that came with the printer (or any USB printer cable) and set up a hardwired USB printer queue.  Then print a couple of print jobs - I use TextEdit and type in "1234".  Then try the same thing but select your WiFi print queue - I just type another line on the same sheet of paper with TextEdit.
    The WiFi connection should work again.  I did this a few more times and then disconnected the USB cable and now it continues to work without the USB print queue being used.  I can also print to the WiFi queue with my iMac.
    If you still have problems I suggest you set up the printer again on the WiFi router using the "print cable connection" method.  Here's a link to a webpage someone kindly provided instructions for the process:
    http://machinesaredigging.com/2011/04/08/how-to-install-the-printer-canon-mx340- wi-fi-without-the-cd-on-mac/
    Good luck!

  • I cannot print to my wireless Canon printer.  A communication error has occurred.

    I have had no problems printing to my wireless Canon printer until yesterday.  Now when I try to print the icon at the bottom shows a printing job has been started but nothing ever prints.  When I open the print cache it tells me that "A communication error has occurred."  I've checked the printer and it is still set up properly.  I have unplugged my wireless router and modem to reset, but this has not interrupted my ability to access internet nor has it reset the printer to a different setting.  I am at a loss as to why I can't print any longer.  Since we bought the mac in July I haven't had any problems and this really has thrown me for a loop as to why it is occuring.  Any thoughts would be greatly appreciated.

    Perhaps one of the printer drivers is corrupt. Go to http://www.canon.com.au/en-AU/Support-Services/Drivers-and-Downloads (or other country download).

  • Cannon mp990  a communication error has occurred

    Hi all,
    I have been having a major problem withh my Cannon mp990 printer. When I try to print ,it keeps on coming up with "a communication error has occurred".
    It's driving me mad !!!!!  HELP PLEASE !!!!!
    thanks
    Speedwell7

    Mac OS X: About the Reset Printing System feature ...
    http://support.apple.com/kb/HT1341?viewlocale=en_US
    10.5/10.6/10.7/10.8 instructions...
    In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
    if you hold option and click the "-" tab it resets the printing system.
    http://www.macosxhints.com/article.php?story=20031215144430486
    Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
    Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
    Resetting the printing system in Mac OS X 10.5.x+++
        1.    To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
        2.    Choose System Preferences from the Apple menu.
        3.    Choose Print & Fax from the View menu.
        4.    Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..." 
   
  As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
    http://support.apple.com/kb/ht1341
    Reboot.

  • A communication error has occurred while invoking commands in SharePoint host process

    Hi All,
    I am using Virtual box to connect to Sharepoint 2013 VPC. Due to an unexpected sutdown of my machine the VPC got some issue. Now I restored it using my bak up file. But after this when I deploy my sharepoint 2013 farm solution Iam getting the following error.
    Error occurred in deployment step 'Recycle IIS Application Pool': A communication error has occurred while invoking commands in SharePoint host process: The server did not provide a meaningful reply; this might be caused by a contract mismatch, a premature
    session shutdown or an internal server error.
    What could be the issue? Any suggestions ?
    Thanks in advance...
    Regards
    Nimisha
    [email protected]

    Hi Nimisha,
    Seems that the original issue of communication error has been solved, for this new issue, it is recommended that you open a new thread which can make others easier
    to focus on one issue in one single thread.
    Best regards,
    Patrick
    Patrick Liang
    TechNet Community Support

  • A communication error has occurred: An XML element was malformed

    Hi all,
    I have trasported an VC model to the production enviroment.  While executing it i am getting the error
    "A communication error has occurred: An XML element was malformed"
    When i search SDN i got to know the details from the Note 979583 as : its a  known limitation of Visual Composer, as the flex is unable to handle the large amount of data been fetched.
    Please let me know whether there is a work around to this problem.  Can this problem be resolved by using Visual composer 7.1 ?
    Thanks in advance.
    Jeswin

    Hi Jeswin,
    Can you please check whether the alias you use in your DEV system is the same as you use in your PROD system? If not, you might also get this error.
    Natty

  • A communication error has occurred:An XML element was malformed(call to SP)

    Hello experts,
    Visual Composer tells me in a pop up, that:
    "A communication error has occurred:An XML element was malformed"
    when it tries to call a Stored Procedure (SP). This is s.th. that happens only sporadically, i.e. I can trigger the SP many times and see that it executed correctly. Then, suddenly it doesn't work anymore, but when I keep clicking it starts working again after a while.
    I checked that nobody has opened or locked my model, because I read that this can cause this behaviour in another thread.
    What is the cause for this? What can I do?
    I'm looking forward to your replies and will reward with points,
    Sincerely,
    Florian

    Hi ,
    wht ever u said is absolute correct
    xml error , 32k span error , portal request failed errors are usually cmng in vc
    sometimes it will work and sometimes it wont work tht tine we have to reimplement our task .
    can please help any one thse error in vc7.1
    Regards ,
    venkat

  • My MP560 canon printer says: error has occurred, B200. Unplug power cord and contact canon

    my MP560 canon printer says: error has occurred, B200. Unplug power cord and contact canon

    Hi hthpggy,
    To try and resolve the issue, please remove the power cord from the back of the printer and leave it out for at least 10 minutes, then plug it back in and turn it back on.  If the error persists, the printer will require servicing to resolve the issue. 
    Please drop us a line by clicking on the Contact Us link to start the process!

  • Trying to print from My Image Garden; get msg "An internal error has occurred"

    I can't print from My Image Garden (v2.0.1),  I either get "An internal error has occurred" or the program hangs.  I run WIndows 7 64 bit.  I can print to the Pixma Pro-100 from other programs.

    I get the same intermittent problem when I try to scan via Image Garden. The whole thing freezes and I have to reboot to try again.

  • Trying to print from My Image Garden; get msg "An internal error has occured

    I am running from MX922. Trying to print from My Image Garden; get msg "An internal error has occurred" I have updated from the Canon website, but still  it freezes up.

    Hi tthaas30,
    If you temporarily disable any antivirus or firewall software that is on your computer and then attempt to print again, do you still experience the same issue?
    If this is a time-sensitive matter, additional support options are available at Contact Us.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • I have a new MX922. All of a sudden I get Support Code C000 printer error has occurred

    I have a fairly new MX922.  All of a sudden I get Support Code C000 which says printer error has occurred.  There is nothing in the print cue.  I have restarted my computer.  I have turned the printer on and off. I have turned the printer off, unplugged the printer, plugged it back in again, and turned on.  The same message and flashing light for the error is still there.  I can't operated my printer. Can anyone help me?
    Thanks,
    Kathy

    Hi Soot!
    So that the Community can help you better, we will need to know the computer operating system you're using (Windows XP/Vista/7/8 or Mac 10.x). Any other error messages or details you'd like to give will also help the Community better understand your issue.
    Thanks and have a great day!

  • LED message Printer error has occurred. Contact the service center.

    I have an MP 490 Printer.  I keep getting an LED message Printer error has occurred.  Contact the service center.  HELP

    Hi Bea!
    So that the Community can help you better, we will need to know what Computer Operating System you're using. (Windows XP/Vista/7/8 or Mac 10.x) 
    Any other details you'd like to give will only help the Community better understand your issue!
    If this is an urgent support need, please CLICK HERE to reach our friendly Technical Support Team by phone or email.
    Thanks and have a great day!

  • When printing I get notation:"An error has occurred in the script on this page"

    when printing I get notation:"An error has occurred in the script on this page", error 1791-Char 1- error invalid argument-Code 01-Can print Word, but not Web pages. Have Windows 7, Home and Internet Explore 10. Please help

    Sorry that you are having a problem with the script error. 
    Try to clear your CACHE and COOKIES on your internet. 
    Are you able to print from another program, such as Firefox, Google chrome, etc?
    Let me know if it prints. 
    **Click the KUDOS star on the left to say 'Thanks'**
    Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

  • I have Maverick 10.9.1 installed I scanned a photo on my HA D 110 series but it won't let me print or save it: An error has occurred saving the file because it could not be written to.  Check the properties for the file to make sure it is not read-only.

    I have Maverick 10.9.1 installed I scanned a photo on my HP D 110 series but it won't let me print or save it: An error has occurred saving the file because it could not be written to.  Check the properties for the file to make sure it is not read-only.

    Read the user manual that came w/the scanner and/or contact HP Support.
    http://support.apple.com/kb/PH14141 OS X Mavericks: Reset the printing system 
    http://support.apple.com/kb/HT3669 Printer and scanner software available for download 
    A scanner driver you may wish to consider:  VueScan Scanner Software

Maybe you are looking for