Communication Error in Crystal Enterprise 10, cannot display reports

I got this problem in my company recently and some of the reports hit communication error and cannot be displayed. Some of them can be 5 megs or 50 megs reports in .rpt or excel file. The crystal viewer will freeze or drops with an communication error. Can someone help me? Need urgent help here. Thanks a lot.

The Visual Studio 2005 migration wizard usually is really good in migrating existing applications.  In this case, the error refers to the "stdole" file so this may not be related to Crystal Reports.  One thing you can try is to create a new test CR project which will create a new web.config file with the required attributes.  Backup your copy of the web.config and copy the new web.config to see if it resolves the issue.  Then compare the 2 to see what is different.
-MJ

Similar Messages

  • Content Coding Error in Firefox/Internet Explorer cannot display webpage

    I can log into Beehive without any issues. I used to be able to go to Workspaces > All My Workspaces and see all the workspaces I had access to. From this list, I could get to any of these workspaces. Now when I go to the same navigation, I get in 'Content Coding Error' in Firefox 9 and 'Internet Explorer cannot display webpage' in Internet Explorer 7.
    If I find an email that invited me to a specific workspace, I can access that workspace only. I cannot find a way to access all workspaces I have access to within Beehive.
    Please let me know what other information I need to provide for assistance.
    Thanks!

    Hi,
    https://beehiveonline.oracle.com/index.html is a public page with no obvious protection so anyone should be able to see it without any difficulty. If this is the page causing the issue then it suggests a local browser issue.
    If you are getting this after logging into https://beehiveonline.oracle.com/teamcollab then it means your account is not provisioned correctly. Contact us out of the forum with your details and we can check out if we have a provisioning issue. I would need your email address and any group you have been invited to be a member of - send it to [email protected]
    Phil

  • Crystal Reports version 10  error when displaying report

    Hello: New member here, been lurking around for a while. A lot of good information here.
    I do hope this is the right place to ask this first question.  I have a customer that has a Crystal Reports 10 installation and cannot display reports since he upgraded from Crystal report 8 to Crystal reports 10
    The error he gets is pop message:
    CRAXDT error Occurred on Server Error Number: -2147221005 Error description: 006ASP 0177Server
    CreateObject Failed~800401f3
    Connection to the database is good we checked with query using SQL.
    Let me know what you think I should check next.
    I appreciate it.
    Thanks
    Damon

    1212487 - Error: "CRAXDRT Error Occured on Server. Error Number:-2147221005"
    Symptom
    A report is called through the Active Server Pages (ASP) Report Server to be displayed in the Report Viewer for ActiveX. However, the report is displayed with blank pages and when the viewer is switched to the Report Viewer for HTML the following error is displayed:
    "CRAXDRT Error Occurred on Server. Error Number:-2147221005 Error Description: 006ASP 0177 Server.CreateObject Failed~Invalid Class String"
    The same ASP application returns the report correctly when it is called from a client computer with the full version of Crystal Report 8 Developer Edition installed.
    Resolution
    It was found that the file, Emfgen.dll, was not installed and registered on the web server computer during the installation of the Crystal Reports ASP Reports Server. The report could be displayed correctly on the client computer, without Crystal Reports Developer Edition installed, after this file had been installed on the web server computer.
    For more information on installing the Crystal Reports web components please search for and download Scr8_WebManualInstall.zip from our website at:

  • Web Dynpro-layout preview-Error-IE cannot display-service in SICF activated

    Hello,
    By starting a view in web dynpro framework, i have the error in tab layout "page cannot be displayed" from IE.
    Before i make the change in the DNS and system32/../etc, the layout was displayed, but the web dynpro application cannot be started.
    Now after those configurations and activation of services in SICF, i can start the web application only with firefox and not internet exploer, and, that internet explorer is preconfigured for the layout preview, i recieve all times the eror "cannot display" when i start a view in the layout tab.
    1. How can i change settings so that view can be displayed in layout after i actived the (hope the suitables i.e. view designer) services in SICF - Default_host...
    2. Is it possible to change IE to firefox as main browser for layout tab.
    Note: For virtual domain i
    1. add dns "domain.com" in the DNS
    2. add in system32/etc/host file to "127.0.0.1 localhost",    "10.10.0.10 sysserv.domain.com"
    3. and trough tr. rz10 in the instance profil input the icm/.... ....domain.com
    Through this three steps i could get the web dynpro application started,
    but from the other side, the layout preview do not display the view again
    and just send error the message: "THIS PROGRAM CANNOT DISPLAY THE WEBPAGE"
    Many thanks for helping
    arnaud
    Edited by: Arnaud on Jul 15, 2010 4:36 PM
    Edited by: Arnaud on Jul 15, 2010 8:31 PM

    Hi,
    The string is not correctly formed ( a quote and a concatenation ) :
    Your url :
    v_url:=nvl(v_rep_port,'http://'||v_rep_HOST ||':'||v_rep_port||')||'/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server='||v_rep_svr;
    The Correction :
    v_url:=nvl(v_rep_port,'http://'||v_rep_HOST ||':'||v_rep_port)||'/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server='||v_rep_svr;
    Hope it helps
    Mohamed Dadi

  • U2lcom.dll function error on Crystal Xl

    I am getting the following error when i am running my report, i am using a barcode formula from a 3rd part UFL:
    Crystal cannot display report. UFL 'u2lcom.dll' that implements this function is missing. Error in File Manifest {7C6C1024-04DA-4F02-B74C-9E413E7842DC}.rpt:
    Error in formula Barcode:
    'stringVar DataToEncode:= "1234"; '
    UFL 'u2lcom.dll' that implements this function is missing.

    Update to CR XI R2 and test again. See this blog on how to upgrade.
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow us on Twitter
    Got Enhancement ideas? Try the SAP Idea Place
    Share Your Knowledge in SCN Topic Spaces

  • Upgrade from Crystal Enterprise 9 to Crystal Server 2011

    As I know, the latest version is Crystal Server 2011 which is a part of the Business Intelligence platform 4.0.  Is it correct ?
    The manual says that Crystal Enterprise 9 CANNOT upgrade to Crystal Server 2011 directly.  It needs 2 steps.
    Crystal Enterprise 9  -
    >  Business Object XI R2  -
    >  Crystal Server 2011
    But I cannot find any trial version of Business Object XI R2.  How can I test the upgrade?
    Is there other method to upgrade?  E.g. transfer the oracle database to the new system?
    Regards,
    Kelvin

    If you are paying maintenance, you should be able to ask for a key for XIR2 version.

  • Malloc error in Crystal reports

    1. Several reports are receving a Malloc Error in Crystal.
    2. Several reports are receiving Database Connection error or Failed to Open Connection error when scheduled in Business Object but the reports run fine in Crystal.
    3. Several reports run successfully in Business Objects but export no data
    Any advice on any of these issues would be greatly appreciated. Thanks.

    Moved to BOE Admin forum.
    Check the error on the failed object. may give you an indication why other than failed to connect.

  • Cannot display the Crystal Report from BW..very Urgent

    Hello Friends,
    We are executing the Crystal report XI report from BW 3.50 but cannot displaying andgiving the error messgae as follows....
    <b>Service cannot be Reached</b>
    <b>What has happened?
    URL http://sapprodbw.company.com:8112/sap/bw/sap/bw/ce_url call was terminated because the corresponding service is not available.
    Note
    The termination occurred in system I12 with error code 404 and for the reason Not found.
    The selected virtual host was 0 .
    What can I do?
    Please select a valid URL.
    If you do not yet have a user ID, contact your system administrator.
    ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:sapprodbw_I12_12-v:0-s:404-r:Notfound
    HTTP 404 - Not found
    Your SAP Internet Communication Framework Team</b>
    I'm getting the above error could plz help me .. its very urgent task for us..
    Thanks in advance for your valuable time...
    Sreedhar G.

    Hi Dinesh,
    I started all the services and i checked the Test service of ICF its giving the same above  error and service cannot be rezched...BASIS is also workin on the same issue but getting ...
    Any help...
    Message was edited by: sreedhar Gunda

  • Oracle Database 11gR1 Enterprise Manager Console Cannot Display in Browser

    Folks,
    Hello. I am running Oracle Database 11gR1 with Operaing System Oracle Linux 5. I have some issues regarding EM connects with the Database Server as below:
    First, the default listener is LISTENER with standard port number 1521 and protocol TCP/IP.
    Its corresponding service naming S1 is with port 1521 and protocol TCP/IP and hostname localhost.localdomain.
    I run this listener in the following way:
    Step 1: [user@localhost bin]./lsnrctl start LISTENER (This command runs sucessfully.)
    Step 2: [user@localhost bin] ./sqlplus SYS/SYS as sysdba (This command starts sqlplus sucessfully.)
    Step 3: [user@localhost sqldeveloper] ./sqldeveloper.sh (This command invokes SQL Developer sucessfully.)
    But when start Enterprise Manager Console, it cannot connect with the Database. I do it in this way:
    [user@localhost bin] ./emctl start dbconsole
    The above command's output is:
    https://localhost.localdomain:1158/em/console/aboutApplication
    Starting Oracle Enterprise Manager 11g Database Control ... ...
    When open the link https://localhost.localdomain:1158/em/console/aboutApplication in browser, this message comes up:
    The connection to localhost.localdomain: 1158 cannot be established.
    Thus, I add Port Number 1158 into both LISTENER and Service Naming S1. I run ./emctl start dbconsole again and get this message:
    The connection to localhost.localdomain:1158 was interrupted while the page was loading.
    In order to solve the above issue, I create another listener LISTENER2 and another Service Naming S2 with Port Number 1158 and protocol TCP/IP because
    in my point of view, each listener only can have one Port Number(1521 or 1158) and its corresponding Service Naming (S1 or S2) need to have the same Port Number and Protocol (TCP/IP).
    But when I run [user@localhost bin]./lsnrctl start LISTENER2, this message comes up: the listener supports no service.
    From the message, it seems that LISTENER2 cannot work with its corresponding Service Naming S2 with Port 1158.
    EM with Port 1158 cannot display in Browser.
    My questions are :
    First, Is there any relationship needed to be established between listener(LISTENER2) and Service Naming(S2) in order to display EM in Browser ?
    Second, how do folks display EM in browser ?
    Thanks.

    Folks,
    Hello. Thanks a lot for replying. I do the following command: [user@localhost bin]$ wget http://localhost.localdomain:1158/em
    The command returns the message:
    --11:36:33-- http://localhost.localdomain:1158/em
    Resolving localhost.localdomain... 127.0.0.1
    Connecting to localhost.localdomain|127.0.0.1|:1158... connected.
    HTTP request sent, awaiting response... 200 No headers, assuming HTTP/0.9
    Length: unspecified
    Saving to: `em'
    [ <=>                                                                                                              ] 7 --.-K/s in 0.002s
    11:36:33 (4.15 KB/s) - Read error at byte 7 (Connection reset by peer).Retrying.
    --11:36:34-- (try: 2) http://localhost.localdomain:1158/em
    Connecting to localhost.localdomain|127.0.0.1|:1158... connected.
    HTTP request sent, awaiting response... 200 No headers, assuming HTTP/0.9
    Length: unspecified
    Saving to: `em.1'
    100%[=================================================================================================================>] 7 --.-K/s in 0s
    11:36:34 (16.8 KB/s) - Read error at byte 7 (Connection reset by peer).Retrying.
    The above message repeats again and again until finally returns the following message:
    11:39:02 (40.2 KB/s) - Read error at byte 7 (Connection reset by peer).Giving up.
    In browser, http://localhost.localdomain:1158/em cannot display and pop up a Windows with the message: You have chosen to open whicn is BIN file from http://localhost.localdomain:1158 What sholud FireFox do with this file ? Save to Disk ?
    My question is:
    I don't know how to display http://localhost.localdomain:1158/em in Browser. How to solve the issue ?
    Thanks.

  • "SharePoint Designer cannot display the item" error when edit workflow

    Hi
    I create workflow for sharepoint list in version 2007. Then upgrade sharepoint form version 2007 to 2010. Now when I want to edit this workflow, get this error:
    “SharePoint Designer cannot display the item.
    What you can try:
    Click the Refresh button or press F5 to refresh the content from your site.
    Go back to the previous page
    Most likely causes:
    The file has been deleted from the site.
    The site is encountering problems.”
    What is the problem?
    Thanks.

    Hi,
    Have you used custom activity in your workflow? We may come across this issue when we use custom activity. A workaournd is to modify the Workflows XOML file, and remove custom activity reference from it. And restart your SharePoint designer. See below blog.
    http://saiabhilash.blogspot.com/2011/11/sharepoint-designer-cannot-display-item.html
    Or a quick workaround is recreate the workflow in SharePoint Designer 2010.
    Thanks & Regards,
    Emir
    Emir Liu
    TechNet Community Support

  • Printer communication error and cannot add a new printer

    I was happily using my Epson Artisan 810 printer this morning, connected wirelessly to my iMac.  All of a sudden I cannot print, get "Communication Error".  Checked Epson's website, no luck there.  Re-checked my wireless settings on the printer itself and re-confirmed them, it will print test pages from the printer, but still not communicating with the iMac.  I thought that removing the printer and then adding it back in might help, but now I cannot add any printer at all.
    I resorted to my MacBook Pro, and now have the same problem with this as well.
    Any ideas please?  What else can I check.  My internet and so on are fine.  The printer itself shows the wireless icon and says the reception is excellent on the printout it produced.
    Thanks so much!
    L.

    It would be unusual for only Bonjour to stop working in the printer. The more likely is that the printer is set to a different network subnet to that for your Mac or, as you mentioned, something like a firewall is blocking it.
    The IP addressing is the most common cause. If there is a process to view or print the network settings for the Epson, then this will show what IP address range it has, which should be the same as your Mac. With the IP address, there will be four sets of numbers. For a typical home network, the first three sets are known as the IP subnet, while the last set is the network address. For example, a device with an IP address of 10.0.1.5, has an IP subnet of 10.0.1 and a network address of 5. For your Mac to 'see' the printer, both devices would need the same IP subnet, while having a different network address. So if you can check what IP address the Epson has, you may find it is using a different IP subnet to your Mac.

  • Cannot display custom error message in CRM_MKTLIST_BADI

    We did implement the following BADI BADI Name: CRM_MKTLIST_BADI
    Interface: IF_EX_CRM_MKTLIST_BADI Method: MAP_AND_CONVERT_DATA
    This enhancement is for suport the extension field for create new BP in
    external list management (transaction CRMD_MKTLIST). The BP creation
    process work properly but we cannot display our custom error message,
    only SAP standard error message is shown. We did try using the export
    parameter ET_MKTLIST_E but it does not work as expected, custom message
    still cannot display.
    How we can be show the custome error message ?
    Thanks in advance.
    Supreeya K.

    Hello Supreeya,
    have you tried to post this question in the SAP CRM: Webclient UI - Framework forum?
    Regards
    Gregor

  • Error message "This program cannot display the webpage when uploading images to Cafe Press

    I have had a Café Press shop for five years and except for sometimes being slow, no problems uploading images. Now, suddenly for 3 days I get the message "This program cannot display the webpage
    Most likely causes:
    • You are not connected to the Internet.
    • The website is encountering problems.
    • There might be a typing error in the address.
    What you can try:
    Check your Internet connection. Try visiting another website to make sure you are connected.
    Retype the address."
    I got the messsage about half way through the uploading of an image. People suggested using "firefox" instead of IE so I now get a similar error message from Firefox. I signed in, clicked on the image I wanted to upload and hit "upload" and get message as follows:
    Server not found
    Firefox can't find the server at members.cafepress.com.
    * Check the address for typing errors such as
    ww.example.com instead of
    [url=http://www.example.com]www.example.com[/url]
    * If you are unable to load any pages, check your computer's network connection.
    * If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
    None of this makes sense because I WAS connected to the internet (obviously) or I wouldn't have been able to sign in, go to my media basket, browse for the image and click "upload" and watch as the progress bar showed percentage of upload such as 20%, etc. and even went to 100% at times before giving me the error message. Plus I couldn't make a typing error since I wasn't typing anything but uploading an image. Any suggestions?
    Whatever your suggestion, I need step by step instructions as I am totally computer illiterate. I don't even know what a "proxy" is and don't know if I have a "firewall" as the message suggests. I have "Comodo" security and am using Windows XP.
    I contacted CP which was no help at all. All they did was tell me to clear my cache which I do after every session. Thanks
    Nancy
    http://www.cafepress.com/calendarflr

    Sounds like your desktop application is in fact running from
    a server. CHMs were identified as a security risk by Microsoft and
    are best suited to the user's PC.
    Click
    here for more information.

  • Error message from Adobe Reader. cannot extract the embedded font 'LICCMC+MyriadPro-Light'. some characters may not display or print correctly. Print looks like gibberish

    Trying to view/print PDF documents from website. Print looks like gibberish and is unreadable. Problem is with the embedded fonts. Error message from Adobe says cannot extract the embedded font 'LICCMC+MyriadPro-Light'. some characters may not display or print correctly.

    Try Adobe support, that's not a Firefox support issue. <br />
    http://forums.adobe.com/index.jspa

  • Getting Communication failure error in crystal reports

    Hi All,
    We are using Crystal reports for our business as a report tool. We are getting Communication error failure message. Please help us to resolve this issue. We are using Multihomed server.
    If we can resolve this problem by coming Monday morning EST it will be great help for us.
    Contact numbers are Surya : (1) 609-439-6786 (mob) and (1)  408-689-7221 (home)
                                      Venkat: (91) 9444704889 (mob)
    Waiting for your call.
    With Regards,
    Venkat.

    Hi,
    The error messages occur because there are multiple network cards or name resolution issues on the server.
    To resolve the error, specify an available port for an IP address
    1. Open the Crystal Configuration Manager (CCM).
    2. Stop the CMS.
    3. Define an available port number on the command line of the CMS for the IP address (for example, - Port <IP Address>:<port number>). Verify that the port number is not in use.
    4. Start the CMS.
    Now Logging on to the CMS from the applications will now occur successfully.

Maybe you are looking for

  • How to make something default in File Info..

    Hi All, i would like to know that do we have any settings where we can set the custom panel as the default panel while loading the "File->File Info..." ? any possiblility for calling the "File->File Info..." from the plugin and setting the custom pan

  • Why is it  type in Photoshop  CS4 and I get Photoshop FxG extension for my search?

    I'm using Photoshop CS4 on my Imac Intel computer printing on my Epson Pro 4000 printer. I just started using Colormunki calibration software to make ICC profiles for my printing papers on the Epson 4000 printer. I;m a little pissed due a month of wo

  • 9ias and forms 9i

    Hour Glass being displayed when moving in and out of fields even in a simple form. not a problem in an intranet environment but cringe at the effect on a dial up 56k modem connection using a low spec browser client PC Please confirm that each time a

  • Question about using net time

    I am trying to synchronize the time of my machine with another machine (target) on the local network by using "net time" command and found something strange for me. If I change the local time on my machine and then use "net time" to read or synchroni

  • I want my old firefox back before I updated to 6.0. My plugins don't work

    My Roboform and My Norton 360 Identity toolbars aren't showing