Communication error via USB to Mitsubishi Outlander sport with iPhone 4 4.2

I just bought a brand new 2011 Mitsubishi Outlander Sport with all the bells and whistles. I tried connecting my iPhone 4 running firmware 4.2.1 and it gives me a communication error. We have 3 iPhone 4 at home and all the same problem. When we used an iPod nano it worked fine, do what's the deal with the iPhone 4? Very disappointing, any ideas?

Gonna try this fix with my Mitsubishi outlander !!! 2011 !!! "FUSE System allows you to update your system software and new software is now available. It will allow you to enjoy USB audio connection with an iPod /iPhone with operating software of 4.0 or above." from this website                                                                             http://www.mitsubishifuse.com/support.taf?p=7&n=1
booked an appointment to get this firmware update
will report back after it is done
Lets hope this works !

Similar Messages

  • Using USB to connect to itunes with iphone. Getting error OXE8000084 with pulsating tone. Have reset passowrd, authorized computer, & repaired itunes when reinstalled. Any suggestions on how to successfully connect?

    Using USB to connect to itunes with iphone.  Getting error OXE8000084 with pulsating tone. Have reset password, authorized computer, & repaired itunes when reinstalled it. Any suggestions on how to successfully connect to itunes and what this error message means?  Thanks

    0X is a Windows Error. Take the time to look over on the right under the "More Like This" and look for ones that have the green checkmark as being solved. You should find answers there.

  • Iphone 4s not getting detected in macbook after connecting via usb cable, also photos taken in iPhone not showing in macbook pro

    iphone 4s not getting detected in macbook after connecting via usb cable, also photos taken in iPhone not showing in macbook pro    

    Thanks. I realises that i will hv to go to iphoto to see the photo. Its now working !!!!!

  • Communication error via HTTPS

    Hello,
    I have Flash AIR application, that communicates with server via HTTPS  protocol. On MAC I install requested certificate and it works fine, but  unfortunently on Windows 7 and XP I have this error:
    "[IOErrorEvent type="ioError" bubbles=false cancelable=false eventPhase=2 text="Error #2032" errorID=2032]"
    I aasume its something wrong with system configuration, but anyone know how to fix this?

    Gonna try this fix with my Mitsubishi outlander !!! 2011 !!! "FUSE System allows you to update your system software and new software is now available. It will allow you to enjoy USB audio connection with an iPod /iPhone with operating software of 4.0 or above." from this website                                                                             http://www.mitsubishifuse.com/support.taf?p=7&n=1
    booked an appointment to get this firmware update
    will report back after it is done
    Lets hope this works !

  • When i plug in my iPhone via USB iTunes dose not reconize my iphone

    i just got a new computer (with windows 8) and i downloaded the latest version of apple i have a iphone 5 with ios 7.0.4 when i plug in my phone via USB to my laptop an auto play pops up that gives me the options to: organize and edit my photos (adobe elements organizer 11.0), open device to view files (file explorer),import photos and videos and or take no action but itunes does not open and on my iphone when i unlock it (i dont have a password) it also has a popup that askes if i want to trust my computer "your settings and data will be accessible from this computer when connected."then says trust or dont trust and it does every time i plug my phone into my computer when i open itunes my iphone is not reconized itunes dose not even reconize that there is a devive plugged in for that matter. and i have looked at previous problems and they all say to press on the device button. but there is no button when i go into prefrences ctrl+ and press devices all that it says is device backups (witch is empty) then "prevent ipods,ipads and iphones from sycing automatially witch is not marked off    then warn when _____ of the data on this computer will be changed i selected any theit says itunes is not paired with any remotes then reset sync history
    my questions are how do i get itunes to reconize my device and the trust my compter thing to turn off how do i sync my device with my computer

    Go through this support doc:
    OS: Device not recognised in iTunes
    Windows: http://support.apple.com/kb/TS1538

  • Samsung SCN-4826FN Scanning error via USB cable

    When scanning from the Multifunction Printer(MFP) user interface selecting Scan to PC the scanner is not able to properly connect with the computer. An error message comes up on the screen and says there was a scanning error. I can scan to a USB memory stick via the front panel USB interface and then plug that into the Mac and use the PDF as usual but this adds an extra step!
    The MFP works fine with my older MacBook Pro even with the upgrade to Snow Leopard OS.
    I've reinstalled the Samsung printer/scanner software several times and am at my wits end.
    I've put an email in to Samsung describing the problem, but I have a suspicion that the Latest Snow Leopard OS-X 10.6.5 is to blame.
    any suggestions would be helpful

    When scanning from the Multifunction Printer(MFP) user interface selecting Scan to PC the scanner is not able to properly connect with the computer. An error message comes up on the screen and says there was a scanning error. I can scan to a USB memory stick via the front panel USB interface and then plug that into the Mac and use the PDF as usual but this adds an extra step!
    The MFP works fine with my older MacBook Pro even with the upgrade to Snow Leopard OS.
    I've reinstalled the Samsung printer/scanner software several times and am at my wits end.
    I've put an email in to Samsung describing the problem, but I have a suspicion that the Latest Snow Leopard OS-X 10.6.5 is to blame.
    any suggestions would be helpful

  • GPIB and serial port communication errors via an executalbe file.

    I have a data acquisition program that communicates with instruments via the serial port and GPIB bus. When I create an executable file and run it on another PC I get GPIB and serial port errors when the program tries to initialize these ports. Are there additional vi's I need to include when I build the executable?

    When you installed the GPIB board on the other pc, did you install just NI-GPIB? Did you configure the GPIB board? You also need NI-VISA if your're using VISA calls in your program. You can either install the full NI-VISA or just the run-time version.

  • HP 4250 Photosmart via USB port of Airport Express with OS10.6.8

    I cannot see the printer as a network printer.  I have updated the appropriate drivers for this printer for OS10.6.x.  I have gone through the Airport Express Utility troubleshooting such as restarting printer and Airport, deleting and re-adding printer, updating Airport firmware, etc.  Printer works fine with direct connection to same computer.  How do I get my system to recognize the printer location and connect via the Airport?

    I know this is an older post, but wanted to provide some assistance if still needed.
    It looks like this should work.  Review the steps in this document from HP just in case anything may have been missed.  
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Cannot back up iphone error message " session could not be started with iphone

    I cannot back up my iphone.  Keep getting an error message "a session could not be started with the iphone"  Need help.

    See Here
    Troubleshooting Backup Issues
    http://support.apple.com/kb/ts2529

  • An error occurred while loading this content - only with iPhone not iPad

    I know this issue has been discussed to death with no real solution in sight but my case is slightly different:
    1.  On my new iPad, I select AppleTV (not mirroring), open Safari, then to YouTube and play any HD video. Immediately, the video will be streamed to the AppleTV with no hassle.
    2.  I do the same on my iPhone 4, 4S or 5 and all I get is "An error occurred while loading this content. Try again later". This occurs without fail.
    If I use Jasmine YouTube client, streaming will work perfectly but alas, this app is prone to the error message "Youtube has restricted feeds for this video" and thus, I can't use this.
    If I use the new google youTube app, only the audio gets streamed to the AppleTV. I have to use mirroring and the video does not fill the TV screen but leaving a dark border all round. The streaming is not smooth either. The previous youTube app by Apple works perfectly - never had an issue. As soon as iOS6 came along, I end up with all these problems.
    Is there a solution to all this? Currently, I use only my iPad for streaming YouTube videos but I really want to use my spanking new iPhone 5 but can't.
    I am so sad.
    Can anyone help or am I doomed to use only my iPad for this? I am soooo disappointed with the iPhone 5 due to this.

    Has any other fixes been found.  Since I updated to the latest iOS I've been having a similar problem.  It doesn't matter what I stream through either.  I bought I ATV2 when they first came out and have been using it perfectly fine, however after the last update I haven't been able to stream my movies, tv or even Netflix. 
    I've also been having issues with my ATV2 connecting to my windows 7 desktop where I store all of my movies and TV shows.  I have to deauthorize home sharing and turn it back on for my ATV2 to recognize that it is even on.  Frustrating to say the least.

  • Ipad 1 suddenly does not appear in iTunes and down not load via usb

    All of a sudden my ipad1 is not recognised by itunes.
    Also no loading activity via usb.
    I use Imac with lion.
    My ipad3 runs prefectly.

    Try something very simple .... quit iTunes, reboot the iPad and then restart the Mac and try again.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • Problems with sharing internet connection via usb

    I have been sharing the internet connection on my iPhone 5 via usb to a PC for a few years. When updating to iOS 8.3 and iTunes to 12.1 (from iOS 6 if I remember correctly) the internet sharing through usb stopped working. Sharing through wifi works and settings are the same as when usb internet share did work. Any idea on how to solve this except downgrading?
    For my troubleshooting, has anyone been able to share internet via usb to PC (or Mac) with iOS 8 / iTunes 12.
    PS I have unliited cellular data and iPhone is my only internet connection at home,

    Mark,
    There is a excellent book that teaches you how to do this (and other things) called Mac OS X Tiger: The Missing Manual (others of course)
    If I remember correctly (book is on loan)
    1: System Preferences>Network>Show>network port configurations (click unlock)
    2: Click>Built in Firewire and drag to the top of the list (why I forget why)
    3: System Preferences>Sharing>Internet>Share your connection from: Built in Ethernet (or what your using for your connection in) >To computers using: Built in Firewire>Start
    4: Mac #2>Hook up Firewire 400 cable>System Preferences>Network>Location>New Location
    5: Show>Network Port Configurations>Drag Built in Firewire to top of list and enable.
    6: I also think you have to enable Personal Web Sharing on the Mac hosting the internet.
    anyway play with it, you'll figure it out. if someone doesn't get to you.

  • How connect iPhone to TV (Philips) via USB?

    How connect iPhone to TV (Philips) via USB, because TV does't recognize iPhone.

    http://support.apple.com/kb/ht4108
    http://support.apple.com/kb/HT1454

  • 1102w won't print via USB

    We have a 1102w that is currently being used via USB.  This works perfectly with my wife's macbook and my windows 7 laptop.
    I have a macbook pro with OSC v 10.9.5 and have gone through the add printer routine, but when i print I can see that the document goes to the print queue, the print queue empties but the printer does not print the document, the blue light flashes but no printing....   any help in getting this fixed would be much appreciated.
    This question was solved.
    View Solution.

    Hi @richardskelt ,
    I see by your post that you are unable to print over a USB connection on the 10.9 computer, but you can print on the Macbook and the Windows 7 laptop. I will do my best to assist you with this issue.
    Connect the printer directly to the Mac by the USB cable and run the Apple Updates to install the printer.
    Check to make sure the correct driver for the printer name is listed.
    Click the Apple menu and then click System Preferences. Click Printers & Scanners, highlight the printer name on the left side and on the right side of the screen it should show the printer's name. (P1102w)
    If the full printer name isn't listed correctly, delete it and add the printer name back in from the list. Click the - sign to delete the driver and then click the + sign to add the driver, might have to click the drop down to select the printer's name to add it in.
    Test the printer.
    If you are still having issues, please do the following:
    Repair the Disk Permissions on the Mac:
    Close all applications.
    On the Apple menu bar, click Go, click Applications and then click Utilities.
    Double-click Disk Utility.
    Highlight your hard drive/partition on the left.
    Click Verify and then Repair Disk Permissions.
    Restart the computer..
    Reset the Printing System:
    Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
    Click the Apple icon ( ), and then click System Preferences.
    Click Printers & Scanners.
    Right-click (or Ctrl +click) in the left white side panel, then click Reset printing system.
    Click OK to confirm the reset.
    Type the correct Name and Password.
    Click OK to reset the printing system.
    Then click the + sign to add the driver, you might have to click the drop down to select the printer's name, then click on the Add button.
    Test the printer again.
    If you need further assistance, just let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • How connect to device that sends Midi-Signals via USB?

    Hello,
    does anybody know how to communicate with a device that sends Midi-Signals via USB? I am working with Windows XP. I would appreciate any kind of hint.

    rothencharl wrote:
    Hello,
    does anybody know how to communicate with a device that sends Midi-Signals via USB? I am working with Windows XP. I would appreciate any kind of hint.You need a bit of hardware that converts USB to ordinary RS232; you can use RXTX then to get the data in; there you can do with it whatever you want.
    kind regards,
    Jos

Maybe you are looking for