Communication error with Epson 2400
I am trying to use my Epson 2400 printer with my MacBook and my MacPro, both using Leopard (10.5.5) and connecting by FireWire. When I try to print a photo from PS CS2 with the MacPro, I get a dialog box in the printer application stating that there's a communication error, and the job doesn't print. When I restart the printer and the computer, the same job will start to print, but halt partway through, again with a "communication error". If I then try to print again without restarting, the job won't even start to print. I have to restart the computer, with the same results all over again.
Printing works fine from the laptop using PS Elements. I don't have Elements on the MacPro or CS2 on the laptop. I also have not tried connecting the MacPro by USB, but I shouldn't have to do this.
Any guidance?
Thanks,
--howard
I solved this problem! After lots of searching I ended up at http://discussions.apple.com/thread.jspa?messageID=5692363 Printer setup utility in Leopard which gave the tip to reset the printing system... I did, and then somehow the Epson printer showed up as a Bonjour printer (which I had tried to do in the Airport utility but it would not let me because the name was too short or something strange like that). PageSender Fax showed up also and I just printed a document remotely...
Hope this helps someone else.
Similar Messages
-
Communication error with Epson Stylus C63 with Airport Express
I have a brandnew iMac running 10.5.2. Set up my Airport Express and got the wifi to work in the house. Now I am dealing with remote printing. Printer is plugged into the port on the Airport Express, I see it in the Printer tab of Aiport Utility, I see it in the printer dialogue... but whenever I print I get "communication error with printer". I have unplugged the Airport Express, restarted computers, to no avail.
What am I missing?? Thanks in advance for any tips.
-JoannaI solved this problem! After lots of searching I ended up at http://discussions.apple.com/thread.jspa?messageID=5692363 Printer setup utility in Leopard which gave the tip to reset the printing system... I did, and then somehow the Epson printer showed up as a Bonjour printer (which I had tried to do in the Airport utility but it would not let me because the name was too short or something strange like that). PageSender Fax showed up also and I just printed a document remotely...
Hope this helps someone else. -
Communication error with Epson R2880 printer using Snow Leopard 10.6.4
I am having trouble printing with my Epson R2880 printer on my Mac Pro running OS X 10.6.4 with the most recent software updates. The printer prints about a quarter of the print and then quits giving a "Communication error" message. I have tried uninstalling and then reinstalling the printer and downloading the latest driver form Epson. My other printer, a cheap Canon printer, works fine on the computer with 10.6.4 and the R2880 printer works fine with my old G5 running 10.4.11. Any ideas?
Thanks John. I tried deleting the Epson printer folder from the library like you said and then checked for Software Updates. But Apple did not indicate that there were any for my OS (probably because I had installed the latest OS update this morning). So I installed the driver from the Epson site with the printer folder removed. But this did not work because when I tried to print the computer indicated that there were missing files. So, I reinstalled the Epson folder that I had just moved to trash, deleted the new Epson folder, then tried reinstalling the Epson driver with the original folder in place. THIS WORKED! Finally, I am off and printing but with little knowledge gained about the inner workings of my computer.
-
Communication Error with Epson R2400
I have an Intel Mac running Leopard and Photoshop CS3 and despite the latest driver from Epson my printer will start to print a photo and then stop due to a communication error. I checked the cables, tried printing different photos. Sometimes it will stop near the beginning of a print, sometimes halfway through, sometimes near the end. My printer worked fine with my 4 year old laptop running Tiger and stopped a half hour later with my new machine. Anybody else have this and perhaps an answer?
Just finished a 30 minute tech support call with an upper division rep at Epson, we seem to have fixed the problem, I was very skeptical, but so far all is well. This is exactly what we did:
Go to you user account and navigate to:
Library->Preferences. Select everything that starts with "com.apple.print" (I had nine files) Copy these files to a safe place, they contain customization to you r print settings such as paper handling and quality settings.
Now delete the ones from the Library->Preferences folder.
Go to your main hard drive, not your user account, and select "Library->Printers"
Delete "Epson"
Empty Trash
Reboot
Install the latest driver from Epson for your printer.
Open the "Print & Fax" System Preference
While holding down the "control" key, click in the area where the printers are listed (left side bar). You will be presented with a pop-up menu that says: "rest printing system". Select it and your existing printers will disappear.
Add your printer back to the "Printers" list.
Close the "Print & Fax" window
Add your saved "com.apple.print" files back to the User->Library->Preferences folder
Cross your fingers.
James at Epson asked that I not use this number, which I posted earlier for future requests. -
Communication error with epson artisan 1430 printer
I used to be a Windows pc owner, and never had an issue with my Epson Artisan 1430 printer - Now i have a Macbook (OS X Yosemite 10.10.2) and my printer decides to have a communication error 1/3 the way through printing something .... I have used the Reset Printing System, I have deleted and reinstalled all software and drivers ... I don't know what else to do. My Printer is on a network so i can connect wirelessly .... Please if anyone can help I'd greatly appreciate it...
<Email Edited by Host>Most likely, the printer's Wi-Fi interface is malfunctioning or misconfigured, or else there is a bug in the software. Since this is a current-model printer, your next step should be to contact EPSON support.
-
Communication error with Epson printer SX510W
I am getting a communication error when I try to print on my Epson SX510W wrieless printer. How do I correct this? My operating system is OS X Version 10.9.4.
I've tried re-installing the software from the CD-Rom but it won't let me use the Quick Start, It lets me download the print driver and scan driver from the list of software on the disc but that hasn't made any difference. I think it's a problem with the printer and the IP address, how do I correct this. How do I find the correct IP address on the printer?
Sometimes if I turn the printer off and on again, it allows me to print just one page and then stops again.
John MitchellThanks John. I tried deleting the Epson printer folder from the library like you said and then checked for Software Updates. But Apple did not indicate that there were any for my OS (probably because I had installed the latest OS update this morning). So I installed the driver from the Epson site with the printer folder removed. But this did not work because when I tried to print the computer indicated that there were missing files. So, I reinstalled the Epson folder that I had just moved to trash, deleted the new Epson folder, then tried reinstalling the Epson driver with the original folder in place. THIS WORKED! Finally, I am off and printing but with little knowledge gained about the inner workings of my computer.
-
Communication error with epson R24000
I have spent two days trying to network my Epson Photo R2400 to my imac via an airport express.
I upgraded the epson software and have managed to get the printer recognised. However, when I send a print job I get a 'communication error' and the print stops at the first line.
I have tried a couple of fixes including following the advice here - http://docs.info.apple.com/article.html?artnum=107418
I'd appreciate any other help.
ThanksUnfortunately, not all USB printers are compatible with AirPort base stations. In addition, the AirPort's USB port does not support the "advanced" printer functions, like scanning, copying or faxing, of multi-function printers.
To see if your printer is compatible, take a look at the following site: iFelix Unofficial AirPort Printer Compatibility List
If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try. -
Communication Error with Epson 1400 on Airport
Hey all,
I have my Epson Stylus Photo 1400 connected to my Airport and it used to work just fine under Tiger. Now I keep getting communication errors. The printer dialog finds the printer and says, "Printer is now on-line," but then there is a moment of pause and then the message "Communication Error" pops up under "Printer is now on-line."
My Epson R340, also connected to my Airport works just fine (although I did have to re-install it after upgrading to Leopard...thanks Steve).
I have downloaded the latest drivers from the Epson site. I deleted the printer from the print list and added it again.
It didn't work. Any ideas.I, too, have the same problem with Epson Picturemate Deluxe and Leopard. Sorry no solution but maybe more details of the problem will help to find a solution.
USB printing works fine but communication error occurs after a few seconds of printing via airport, almost as if there is an overflow of data. During USB printing, the printer pauses for a fraction of a second after printing about 20% of the file but then continues. It seems to do this in increments of 20% but always reaches the end. This was the same under Tiger. Under airport, it does not seem to continue after the first 20% of the file.
Epson claims Leopard comes with updated drivers. They are also available for download from Epson Europe (v. 3.09 for Picturemate but Picturemate Deluxe is not indicated) -
Communication error with the LOCAL_EXEC Function BAPI_PTMGREXTATTABS_CHECK
Hello,
We use timesheet (CATS) in a separate SAP system from the SAP system in which HR resides.
I found out how the loosely coupled scenario with CATS works with a SAP HR system. We transfer the workschedule and absence data with report RPTIMEOVERVIEW_REPLICATE to the SAP system in which CATS is used. This data is then available in the PTIMEOV1 table to perform time checks in CATS. The distribution model for ALE takes care of the fact that the data is posted into table PTIMEOV1. With BD97 I set up that the BAPI: PTMGREXTATTABS.CHECK has RFCdestination for synchronous calls = LOCAL_EXEC.
When I want to record on an attendance code without clock times then the above works fine. The SAP system in which CATS resides looks into table PTIMEOV1. So far so good.
However, when I want to record hours WITH clock times then I cannot save the data. The error message HRTIM00CATS667 shows up:
"Communication error with the LOCAL_EXEC Function BAPI_PTMGREXTATTABS_CHECK is no t available system"
Diagnosis
An error has occured during communication with the HR System. The HR data in the time sheet cannot be validated.
From the error message description it seems that it wants to check the SAP HR system instead of looking for the check in the SAP system in which CATS resides.....
When I change the value from LOCAL_EXEC to the system in which HR resides then the error disappears, but then it really checks into the SAP HR system (synchronous check with that SAP HR system) and that is not what the customer wants. The check should be local on the PTIMEOV1 table (in case the SAP HR system is down).
I did not find any OSS notes on the topic....or other info on SDN.
Can anyone help me out concerning this starnge error message, at least for me?
Thanks very much in advance,
Kind regards,
Mirko"A point to add"
I just noticed that following message is being continously receiving in the database alert_log:
Sat Oct 9 16:04:52 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:05:32 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:06:30 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:07:10 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:09:35 2010
Incremental checkpoint up to RBA [0x1d.1f9928.0], current log tail at RBA [0x1d.1f9a79.0]
Sat Oct 9 16:11:52 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:29:40 2010
Incremental checkpoint up to RBA [0x1d.1f9b87.0], current log tail at RBA [0x1d.1f9bf4.0]
~
Please help. -
I have a cluster of 2 IIS web servers on Windows Server 2008 R2. They had been running on CF10 for over a year (if not two) with no problems. I upgraded one server to CF11 and now that server is crashing while the CF10 servers is still running fine.
In the Windows event log I'm seeing 4 instances of this error:
"A process serving application pool '******' suffered a fatal communication error with the Windows Process Activation Service. The process id was '4652'. The data field contains the error number."
Then finally:
"Application pool '******' is being automatically disabled due to a series of failures in the process(es) serving that application pool.".
Looking at the application pool in the IIS admin it is stopped. Restarting will resolve but it will eventually crash.
What could be the issue?
-PhilI'm seeing in the CF logs leading up to the crash:
Jun 04, 2014 11:11:31 AM org.apache.coyote.ajp.AjpProcessor getRealPathFromServer
SEVERE: Error in getRealPathFromConn
java.net.SocketException: Connection reset by peer: socket write error
at java.net.SocketOutputStream.socketWrite0(Native Method)
at java.net.SocketOutputStream.socketWrite(Unknown Source)
at java.net.SocketOutputStream.write(Unknown Source)
at org.apache.coyote.ajp.AjpProcessor.getRealPathFromServer(AjpProcessor.java:402)
at org.apache.coyote.ajp.AbstractAjpProcessor.getRealPath(AbstractAjpProcessor.java:1276)
at org.apache.naming.resources.FileDirContext.doGetRealPath(FileDirContext.java:202)
at org.apache.naming.resources.BaseDirContext.getRealPath(BaseDirContext.java:424)
at org.apache.catalina.core.StandardContext.getRealPath(StandardContext.java:4660)
at org.apache.catalina.core.ApplicationContext.getRealPath(ApplicationContext.java:432)
at org.apache.catalina.core.ApplicationContextFacade.getRealPath(ApplicationContextFacade.ja va:333)
at coldfusion.runtime.ServletContextWrapper.doGetRealPath(ServletContextWrapper.java:184)
at coldfusion.runtime.ServletContextWrapper._doGetRealPath(ServletContextWrapper.java:116)
at coldfusion.runtime.ServletContextWrapper.getRealPath(ServletContextWrapper.java:98)
at coldfusion.filter.FusionContext.getRealPath(FusionContext.java:999)
at coldfusion.filter.FusionContext.getRealPath(FusionContext.java:937)
at coldfusion.runtime.RuntimeServiceImpl.resolveTemplatePath(RuntimeServiceImpl.java:866)
at coldfusion.tagext.lang.IncludeTag.setTemplate(IncludeTag.java:420)
at cfApplication2ecfc1835967654.runPage(C:\Data\http\domain\apps\Application.cfc:3)
at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:246)
at coldfusion.filter.SilentFilter.invoke(SilentFilter.java:47)
at coldfusion.runtime.TemplateProxyFactory.resolveComponentHelper(TemplateProxyFactory.java: 538)
at coldfusion.runtime.TemplateProxyFactory.resolveName(TemplateProxyFactory.java:248)
at coldfusion.runtime.TemplateProxyFactory.resolveName(TemplateProxyFactory.java:159)
at coldfusion.runtime.TemplateProxyFactory.resolveFile(TemplateProxyFactory.java:120)
at coldfusion.cfc.CFCProxy.<init>(CFCProxy.java:138)
at coldfusion.cfc.CFCProxy.<init>(CFCProxy.java:84)
at coldfusion.runtime.AppEventInvoker.<init>(AppEventInvoker.java:64)
at coldfusion.filter.PathFilter.resolveApplicationScope(PathFilter.java:195)
at coldfusion.filter.PathFilter.invoke(PathFilter.java:124)
at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:94)
at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8)
at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38)
at coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:58)
at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38)
at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
at coldfusion.filter.CachingFilter.invoke(CachingFilter.java:62)
at coldfusion.CfmServlet.service(CfmServlet.java:219)
at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:303)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:208)
at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42 )
at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:241)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:208)
at sun.reflect.GeneratedMethodAccessor118.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.intergral.fusionreactor.j2ee.filterchain.WrappedFilterChain.doFilter(WrappedFilterCha in.java:97)
at com.intergral.fusionreactor.j2ee.filter.FusionReactorRequestHandler.doNext(FusionReactorR equestHandler.java:472)
at com.intergral.fusionreactor.j2ee.filter.FusionReactorRequestHandler.doHttpServletRequest( FusionReactorRequestHandler.java:312)
at com.intergral.fusionreactor.j2ee.filter.FusionReactorRequestHandler.doFusionRequest(Fusio nReactorRequestHandler.java:192)
at com.intergral.fusionreactor.j2ee.filter.FusionReactorRequestHandler.handle(FusionReactorR equestHandler.java:507)
at com.intergral.fusionreactor.j2ee.filter.FusionReactorCoreFilter.doFilter(FusionReactorCor eFilter.java:36)
at sun.reflect.GeneratedMethodAccessor117.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.intergral.fusionreactor.j2ee.filterchain.WrappedFilterChain.doFilter(WrappedFilterCha in.java:79)
at sun.reflect.GeneratedMethodAccessor116.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.intergral.fusionreactor.agent.filter.FusionReactorStaticFilter.doFilter(FusionReactor StaticFilter.java:53)
at com.intergral.fusionreactor.agent.pointcuts.NewFilterChainPointCut$1.invoke(NewFilterChai nPointCut.java:41)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:220)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:122)
at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:501)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:170)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:98)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:116)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:422)
at org.apache.coyote.ajp.AjpProcessor.process(AjpProcessor.java:198)
at org.apache.coyote.AbstractProtocol$AbstractConnectionHandler.process(AbstractProtocol.jav a:607)
at org.apache.tomcat.util.net.JIoEndpoint$SocketProcessor.run(JIoEndpoint.java:313)
at java.util.concurrent.ThreadPoolExecutor.runWorker(Unknown Source)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
at java.lang.Thread.run(Unknown Source) -
Communication error with the opmn server local port
Working on 64-bit R12.0.6 on AIX 5L
Application services are not being started properly. They are being started with status 2(sometimes with 4).
Autocinfig is being successfully completed.
Please help me how I can get rid of this error. Following are some of the environment setting details:
ons.conf
nodes=appaix02.us.oracle.com:15007
opmn.xml
<opmn xmlns="http://www.oracle.com/ias-instance">
<notification-server>
<port local="15006" remote="15007" request="15005"/>
opmn.log
OPMN worker process exited with status 4. Restarting
OPMN worker process exited with status 4. Restarting
OPMN worker process exited with status 4. Restarting
OPMN worker process exited with status 4. Restarting
OPMN worker process exited with status 4. Restarting
OPMN worker process exited with status 4. Restarting
ons.log
07/01/11 13:12:02 [4] ONS server initiated
07/01/11 13:12:52 [4] Logging disabled
07/01/11 13:12:53 [4] ONS server initiated
07/01/11 13:13:04 [4] Logging disabled
07/01/11 13:13:04 [4] ONS server initiated
07/01/11 13:13:17 [4] Logging disabled
07/01/11 13:13:28 [4] ONS server initiated
07/01/11 13:13:40 [4] Logging disabled
07/01/11 13:13:41 [4] ONS server initiated
07/01/11 13:14:20 [4] Logging disabled
07/01/11 13:14:21 [4] ONS server initiated
07/01/11 13:14:29 [4] Logging disabled
07/01/11 13:14:29 [4] ONS server initiated
07/01/11 13:14:34 [4] Logging disabled
07/01/11 13:14:34 [4] ONS server initiated
07/01/11 13:15:53 [4] Logging disabled
adopmnctl.txt
10/08/10-23:30:43 :: adopmnctl.sh version 120.4.12000000.3
10/08/10-23:30:43 :: adopmnctl.sh: Stopping Oracle Process Manager (OPMN) and t
he managed processes
opmnctl: stopping opmn and all managed processes...
10/09/10-11:13:41 :: adopmnctl.sh version 120.4.12000000.3
10/09/10-11:13:41 :: adopmnctl.sh: Starting Oracle Process Manager (OPMN)
opmnctl: opmn start failed.
10/09/10-11:15:09 :: adopmnctl.sh: exiting with status 2
adformsctl.txt
opmnctl: stopping opmn managed processes...
10/09/10-11:18:11 :: adformsctl.sh version 120.12.12000000.5
10/09/10-11:18:11 :: adformsctl.sh: starting OPMN if it is not running
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
opmnctl: opmn start failed.
Please help."A point to add"
I just noticed that following message is being continously receiving in the database alert_log:
Sat Oct 9 16:04:52 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:05:32 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:06:30 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:07:10 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:09:35 2010
Incremental checkpoint up to RBA [0x1d.1f9928.0], current log tail at RBA [0x1d.1f9a79.0]
Sat Oct 9 16:11:52 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:29:40 2010
Incremental checkpoint up to RBA [0x1d.1f9b87.0], current log tail at RBA [0x1d.1f9bf4.0]
~
Please help. -
I am using form based Sharepoint servers and received below error. Is there any way to solve this?
Sharepoint 2010 in Windows 2008 R2 Server.
A process serving application pool 'Sharepoint-2' suffered a fatal communication error with the Windows Process Activation Service. The process id was '11516'. The data field contains the error number.I don't see any number provided in the event log. I got this through Sharepoint diagnostic tool. below is the log.
Log Name: System
Source: Microsoft-Windows-WAS
Date: 12/17/2013 5:16:34 AM
Event ID: 5011
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: 525531-WEB03.dfw.intensive.int
Description:
A process serving application pool 'Sharepoint-2' suffered a fatal communication error with the Windows Process Activation Service. The process id was '8180'. The data field contains the error number.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-WAS" Guid="{524B5D04-133C-4A62-8362-64E8EDB9CE40}" EventSourceName="WAS" />
<EventID Qualifiers="32768">5011</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-12-17T10:16:34.000000000Z" />
<EventRecordID>23515</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>System</Channel>
<Computer>525531-WEB03.dfw.intensive.int</Computer>
<Security />
</System>
<EventData>
<Data Name="AppPoolID">Sharepoint-2</Data>
<Data Name="ProcessID">8180</Data>
<Binary>6D000780</Binary>
</EventData>
</Event> -
Communication error with external system ( VERTEX )
Hi Folks,
While creation the Credit memo request or Sales order /invoice system giving the error message " COmmunication error with external system ( VERTEX ) " and stopping to proceed further and even not able to post the accounting document.
Please help me out here.
Answers will be appreciated and rewared.
Regards,
Ram.Hi,
check this below thread
Communication error with the external tax system (VERTEX_MS0018)
OR
Remove V from the Extrernal System at the location IMG->financial Accounting->Financial Accounting Global Settings->Tax on Sales/Purchases->Basic Settings->External Tax Calculation->Activate External Tax Calculation
Reg,
JJ
Edited by: Jagsap on Mar 5, 2010 1:15 PM -
Getting Communication error with the external tax system(VERTEX_MS0018)
Hi All,
I am a new SAP HCM self learner. I am practicing it on company's sandbox system. When I am trying to create a company and saving the address, it is returning Communication error with the external tax system(VERTEX_MS0018). I have already tried to solve is issue by going thru previous related to same issue like
Communication error with the external tax system (VERTEX_MS0018) ...Urgent
but coudn't solve the issue.
Please help. Is this issue coming as I am using a training environment? any alternate approach?Hi Ravi,
To disable the connection to Vertex:
Goto tcode SPRO > Cross Application Components > Transaction Tax Engine >
Technical Settings> Define External Tax System
Here an RFC would be defined. Remove it and try again.
Also in SPRO > Cross Application Components > Tax Determination based on Jurisdiction Codes > External Tax Jurisdiction > Activate External Tax Jurisdiction.
Remove the entry 'V' here.
Regards,
Srikishan -
COMMUNICATION ERROR WITH EXTERNAL TAXATION SYSTEM - VERTEX_MS0018
When I copied US company code 3000 to my org using USD as currency code with a a view to simulate US scenarios it threw an error as under.
The error occurred when I was trying to fill in the address tab after copying the company code.
<b>
COMMUNICATION ERROR WITH EXTERNAL TAXATION SYSTEM - VERTEX_MS0018</b>.
Thank you and regards,
RamHi Ram Shiva,
Deactivate External tax
Path:SPRO>Financial Accounting>Financial Accounting Global Settings>Tax on Sales/Purchases>Basic Settings>External Tax Calculation>Activate External Tax Calculation
Hope this will solve
Best Regards
Ashish Jain
Maybe you are looking for
-
I have been using this printer for the past year now and now today all of a sudden it will not print. When I try to print it says there is one job in the print queue but when I check the queue it says error. I cannot print anything! What should I d
-
How do you lock the name of a hard drive?
I have looked quite a bit through the forums and cannot find an exact answer concerning locking the HD name not the entire drive, just its name. Over the years I have several times, I quess parked the cursor over the name of the hard drive and some h
-
Is it ok that the new Mac IOS update take a long time?
Guys, I have more than one hour waiting for the new Mac IOS update. Is it normal? The screen is only with the Apple and 1/4 of progress. Thanks! Ricardo.
-
Double-byte Chinese characters between Flash Media Server and WebLogic 9.2
i have installed a FMS (Flash Media Server 4.0 developer edition) and a weblogic server on linux. The two servers communicate with each other via WebService (Axis2 on Weblogic 9.2). i can send some XML message from FMS to the Weblogic server and rece
-
having then uninstalled 4.0 it wiped out all my bookmarks from 3.16 and passwords as well. Rebuilding those along. I should have backed them up. (I do know better.) 4.0 will not not play nicely on Pogo. The game action suffers great delays in followi