Communication of XI with two different networks

I am new to XI.I have a scenario where I need to send message from R/3 to third party system which is on different LAN.XI server and R/3 are on same LAN.Can you please help me regarding the same.Do I require PCK in this case or can this be done using SOAP ADAPTER.

Hi Sheetal,
>>Its a .Net Application.As per my Knowledge
ok..
>>the problem is server is on separate LAN and .NetApplication is on diff LAN.If this could have been done thr http can u please tell me how.Or is it possible thr SOAP
Go for SOAP receiver Adapter..
>>What is the use of PCK??
By using PCK your XI will connect to PCK (small XI server) and the latter will be used for communicating with the receiver system.
Regards
Suraj

Similar Messages

How to use two different network cards on RT?

Hi everyone... I'm currently working on a project where I have to deal with the issue mentioned in the thread's topic: I have a PC with RT LabVIEW that has to be able to establish network connections using two different network cards. One will be used to connect via TCP/IP with a host computer that will show the data transmitted through shared variables; the other will communicate with another PC through Modbus protocol. The key is that each communication is done through a separate network card.
So far I haven't been able to figure out how to configure both things to happen. Does anyone know how to do this? Any tips will help.
For the RT communication I'm using a standard RT project, with the RT PC being given one of the IPs, and for the Modbus part, I created an I/O server with a master and a slave. Separately everything works fine, but when I get them together it simply won't work.
Thanks for your help!
Solved!
Go to Solution.

Sorry it took me so long to answer, I've been busy lately....I've found a solution to the problem I mentioned, and just in case anyone has similar problems in the future, I'll shortly describe what happened.
As Caseyw suggested, it was necessary to enable both network cards through the Measurement and Automation Explorer. The cause of the connections malfunction was actually that I wasn't using the "right" protocol for the Modbus communication, which ran on the secondary adapter. The solution was to use the URL protocol with the correct path on the field, addressing the right IP address. To avoid making this post a mixture of topics, I won't elaborate futher, but I got the gist of it, so if anyone is having similar problems whether it is working with several network cards or with Modbus communication protocols, feel free to contact me, I'll be glad to help.
Thanks

I need to upgrade memory slots on my Mac mid 2010 up to 4 GB module which is currently 2GB with two different 1GB memory slots.Is it compatible and would like to know about the cost?

I need to upgrade memory slots on my Mac mid 2010 up to 4 GB module which is currently 2GB with two different 1GB memory slots.Is it compatible and would like to know about the cost?

this sub forum is about running windows on macs maybe you should try
https://discussions.apple.com/community/notebooks/macbook

How can i pay on the apple store online with two credit cards, with two different billing addresses

I will be greatful if you could answer me this question...
How can i pay on the apple store online with two credit cards, with two different billing addresses?
I know that you can use two credit cards to pay an item but the problem is that i can only put the billing address of just one of the credit cards, and since the two cards are from different people (my parents) i can't do it. They live in the same place so i don't know if i should just put one of the billing address.
Thank you.
PS. I don't know if this is the right community to ask this, sorry if i'm wrong.

On the Apple Store "Payment & Pricing" page it states:
Using more than one payment card
You can also combine payment methods to pay for your purchase. Choose from the following combinations of credit cards and Apple Gift Cards:
Credit card(s) - up to two
Apple Gift Card(s) - up to eight
Apple Gift Card(s) + one credit card
During checkout, if you are paying with a gift card issued by a credit card company, you can combine it with one credit card.

Open the same raw file in PS5 with two different White Balance settings

I'm trying to open the same Raw File in PS5 with two different White Balance settings. One setting "as shot" the other in "daylight", then blend them. The tutorial I'm watching says to "stack" the images. The tutorial shows one White Balance setting as the "Background" layer and the other setting as "Layer 1". I don't know how to do this and the tutorial is not specific. Can anyone either point me to a step by step instruction or offer some assistance?

Also look at the "Snapshots" feature of Camera Raw itself. It allows you non-destructively to keep multiple sets of settings for a single raw file.
Learning about it far exceeds the scope of what can be done in this particular forum. I would recommend this book as essential reading:
http://www.amazon.com/Real-World-Camera-Adobe-Photoshop/dp/0321713095/ref=sr_1_1?ie=UTF8&q id=1313502199&sr=8-1
Additionally, there's a dedicated Adobe Camera Raw forum:
http://forums.adobe.com/community/cameraraw
Wo Tai Lao Le
我太老了

Airport Express wont setup to two different networks

AirPort Utility was unable to find your AirPort wireless device after restarting. I have tried to setup two different Airport Expresses with two different home networks with the same result. It simply wont restart to join the network. I have setup others with luck but these two and not restarting. This router is Netgear, but the other netwrok was Airport Extreme.

I won't try to help you with that Netgear router, but are both the AirPort Express and the AirPort Extreme 802.11n-capable? Is the AirPort Extreme configured to "Allow this network to be extended"? How did you try to configure the AirPort Express?

How to enter invoice with two different tax codes in one line?

Dear friends,
I have this PO for which I enter the invoice.
I recieve later a subsequent debit for this PO from the transporter. This subsequent invoice has got extra debits, one with 21% VAT and one with 19% VAT, which means two items with two different tax codes.
I want to enter this subsequent debit for each item of the PO, and I want to enter both debits in every item of the PO.
How can I enter in one row in MIRO a debit with two different tax codes.
Thank you.

I want in the same line item to enter two tax codes.
Do you Know if there is any way to do this?
It is a subsequent debit and it has two items with two different tax codes. I want to enter the subsequent debit for a PO with many items and enter the value of the whole subsequent invoice. So there is the need to enter one line item with two tax codes.
How can this be done?
Thank you?

One MIRO document with two different vendors for two different line items

Can it possible to make MIRO for a PO which is having two conditions(Basic price+Freight) with two different vendors.
MIRO document needs:
GR/IR Clearing    Dr.
Freight Clearing Dr.
Vendor RM(X)         Cr.
Vendor Freight(Y)   Cr.
Is it possible to post the above document at a time not individually for each condition.

Hi,
Yes, It is possible to post Material and delivery cost in one document.where in material supplier is different than the Frieght vendor.
Itm PK BusA Acct no.   Description                    Tx     Amount in   USD
001 89       130001     Stock-Ingredients               244 0            880.00
002 96       320001     GR/IR Account - Ing.            244 0          1,200.00-
003 86       520002     Ingredients - PPV               244 0          3,297.87
004 50       320008     GR/IR Account - Duty            244 0            797.87-
005 50       320009     GR/IR Account - Fre.            244 0          2,180.00-
Thanks
Dinabandhu

One Material with two Different In-House Production Days

Dear Experts,
We have 1 semi-finished material (HALB) that is common to two different locations (production version) with two different in-house Production days. How can we separate the 2 different in- house prod. days for this specific material? Could we setup in the production version? if not, could you give us an advice.
Ex:
JDXZ011111 with Prod. version I000 = 3 days
JDXZ011111 with Prod. version X000 = 1 day
We are hoping for your help..
Thank you.
Regards,
Marnelli

Dear Mamelli,
1.You cannot maintain the in-house production time in the production version.
2.In-house production time in days can be maintained in MRP2 view.
3.If Lead time scheduling is carried out at the time of MRP run then the system uses the in-house time for the calcualtion onf basic
start and end dates.Based on the routing data the system proposes the production start and end time.
4.Generally exception messages 64 Production finish after order finish
63 Production start before order start are shown after MRP run.
5.If basic scheduling is carried out then the system proposes only the basic dates.
Regards
S Mangalraj

How to process reports with two different date fields

Morning all,
This question is somewhat similar to what I asked few days back. I created two different reports for two different departments (Credit Control and Free of Charge Control).
These two reports pull data from two different date fields and has different status check ups.
Few days back my director requested me if he can have both reports in one report. That is when I asked question from all of you regarding two reports.
Anyhow, that was created by implementing two sub reports however, the director asked me to combine the two different reports into one in such a way that the output records should be added up with each other hence one single report with all combined data of Credit Control and Free of Charges (not two sub reports in one report).
The problem here which I am getting is that, both reports uses two different date fields. I can live with two different statuses as that can be easily done within formula/RT however how to create a report with Report Selection Formula condition which looks in both date fields and produces results accordingly?
I have tried this by not putting any condition in report selection formula and ran the report, it produced total results from past 6 years.
Any ideas how to produce combined report which has two different date fields?
Many thanks in advance
Regards
Jehanzeb
What I

Charliy,
No the both dates are from two different databases, tables and fields. The Credit date field is from KLAB database under max table where as the FOC date field is from SAE database under maxmast table. Klab date is under credit2 table where as foc date is under order header table.
So its more like this:
Klab->Max-Credit2--->Credit_date
Sae->Maxmast->Order_header---Date entered.
two dates totally different tables, dbs
however, I will try your idea too and see if that works.
Regards
Jehanzeb

Set up itunes account with two different credit cards

Is it possible to set up an existing iTunes Store Account with two different credit cards?
I am currently registered with a personal card but wish to make one purchase for work (Lion OS) using a company credit card.
many other sites let you choose what card to pay from, multiple addresses, etc. but I don't see any options from apple site.
for this purchase I am considering:
1. going into the "edit payment information".
2. editing all the info related to the company card and address.
3. completing the purchase and download
4. going back to the payment info and putting back my original personal informaton.
there must be an easier way -- or is this the only apple offering.
any advice appeciated. TIA.

the_0ne wrote:
but this discussion is clearly for people that have multiple accounts because they have multiple credit cards.
This is incorrect.
It is very clearly for people with a single iTunes account and they want to use multiple credit cards for purchases on that single iTunes account.
If I had one iTunes account with multiple credit cards registered (which again, is what this discussion is in reference to),
Huh? You just wrote it was NOT that.
I bought Lion through my company, which means I logged into the App Store with my company's credentials, of which I have my company credit card registered.
You mean your company paid for it. You are simply the one who did the purchasing using company funds.
I now have a new iMac of which I want to install Lion. Apple allows you to install this same install multiple times on your own personal machines. I had to remember which account I bought Lion on so that I logged into the App Store correctly. If I would have logged into my new iMac with my personal account, I would have then bought Lion again, of which I didn't want to do.
But you did not purchase Lion with your personal account. It was purchased on your business account.
If you want Lion on your persona/home computers, you will need to purchase it.
I also wanted to install iPhoto. I bought iPhoto on my personal account. I had to then log out of the app store from my company account and log back in using my personal account to install iPhoto or I would have just bought iPhoto with my company's credit card, of which I would have been in a good amount of trouble.
Imagine if I bought 3 or 4 apps a week and these apps were scattered across my business account and my personal account. Each time I wanted to install these apps on one of my multiple machines in my house, I would have to remember which account I bought the app on. or go to my purchases or which there could possibly be dozens of apps in each account.
I would hope that your company requires you to track purchases you have made with their money.
And I would think that you would want to keep track of all business purchases so you can get reimbursed (for the purchases you made on their behalf). If/when you leave the company, they can get company owned software that you purchased with their funds.

HT204053 If I have set up my Mac with two different users, can I use two different Apple IDs on the same Mac?

If I have set up my Mac with two different users, can I use two different Apple IDs on the same Mac?

Each user account may have its own Apple ID.

I have two different 5s's with two different phone numbers but they are both using the same iCloud/apple account. After upgrading to iOS8 when I get a phone call on one phone both phones ring.

I have two different 5s's with two different phone numbers but they are both using the same iCloud/apple account. After upgrading to iOS8 when I get a phone call on one phone both phones ring. One phone is for work and one is for private and I don't need both phones to ring from one call. It's bizarre.......is this supposed to be like this? If so where can I turn it off?? And while we are at it iOS8 has installed iBooks on both of my phones and iTunes won't let me uninstall it. I don't need or want iBooks on my phones.

Hi,
There are two easy fixes to this.
One, you can set up Family Sharing, in which you can have two different iCloud Accounts, yet still share the same apps, music, media etc.
Two, go to Settings and turn-off "Handoff". This can be found under the General page.
Hope this helps!

How do I sync two ipods with two different IDs on the same computer?

How do I sync two ipods with two different IDs on the same computer?

Simply connect them. One computer with one iTunes can manage multiple devices. They're tracked by S/N but you might wish to assign them unique names so that you can track them yourself.
The only minor issue is app updating and purchases while on the computer. It's necessary to log out and back in to the "correct" ID. Much easier to do these things from the iPods.

How do I use Home Sharing with two different apple accounts?

How do I use Home Sharing with two different apple accounts?

Morning Saintine,
Thanks for using Apple Support Communities.
Home Sharing enables you to stream or transfer music, movies, TV shows, apps, and more among up to five authorized computers in your household. To do so, you will need to Turn on Home Sharing on each computer using the same Apple ID.
Understanding Home Sharing
http://support.apple.com/kb/HT3819
Hope this helps,
Mario

Communication of XI with two different networks

Similar Messages

Maybe you are looking for