Communication problem between USB MIDI keyboard and logic

Haven't used program in a while, but ready to record a bunch of new stuff and when I started up Logic I cannot get my keyboard to send logic a MIDI signal. I don't ever remember having this happen before. I have always just plugged my keyboard in through the USB port and it works fine but there is no signal at all in the transport window where it says 'no in no out.' Usually whatever chord or note is played is read here as well as note velocity. I thought I could troubleshoot this on my own but I'm stumped. The only thing I can think of that might be the problem is that I have upgraded to 10.5 from 10.4 since the last time I've done any recording. I also have an older version of logic (7) but I don't want to upgrade as I (at one point anyway) was pretty familiar with this version and I have the book to this version. Please help!
Thanks

phudnut wrote:
The only thing I can think of that might be the problem is that I have upgraded to 10.5 from 10.4 since the last time I've done any recording.
That seems like the most likely reason that it doesn't work now - you don't say what kind of keyboard it is, but I'd look on the manufacturer's website to see if there's a 10.5 compatible driver available.

Similar Messages

M-Audio Keystation 49e - USB Midi Keyboard and Motion Midi behavior

Has anyone tried the Motion 2 Midi behavior feature with the
"M-Audio Keystation 49e - USB Midi Keyboard"?
Does it work well?
This is it.
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/71702/wo/Nb2Ohvn QaSox2DPwme2dfhdMs0s/1.0.19.1.0.8.25.7.11.0.3
Thanks!
G5 1.8 GHz Dual Mac OS X (10.4.4)

I forgot to mention that this is the other midi keyboard I am looking at:
http://www.m-audio.com/products/en_us/Oxygen8-main.html
Does anyone have any of these two keyboards to use with motion?

Wireless Communication problem between HP Photosmart C309g and Linksys E2500 router

Hello,
I used C309g connected to DLink Dl-624 router (wireless connection) and everything was working correctly. Now I changed the router to Linksys E2500 (dual band router) and I've got strange problem I cannot fix.
The printer connects to router, obtaint IP address and network report does not indicates any problem. Also HP Print & Scan Doctor does not report any problem.
But when I try to print from my laptop, the pint start and is quickly broken, and I've got the message that printer is diconnected. The printer stops. When I leave it for a coupl of minutes, the printing starts and after few lines stops again with the same message on the laptop.
When I return to DLink router, everything works correctly.
I tried with 4 different laptops, with different operating systems, and i've gor the same issue. But the laptops communicates well, the network does not break..
I enforced router to use IP reserved number for the printer, used the same IP range and number for my network and printer on Linksys and DLink, does not help. I've turn off firewall on the router - does not help. I've change the channel range for 2.4 GHz network to 20MHz only - does not help.
What would be the problem with it? Is there something related to dual-band? Any idea?

Well, I did not install the printer drivers from cd, I did it from the Hp webpage. Looking for the potential problems I reinstall the drivers and it did not helped. I also turn off the firewall router application and it also did not help.
I suspect I have the printer firmware up to date e.g my version is WHM1FN0931BR.
I've made some test with router settings: switch from automatic WPS configuration to manual and tried network mode as wireless b only (default was mixed). This makes the communication between router and printer continuous (no breaks), I could normally scan documents directly to network drive, but could not print at all: the printing option on my laptop pops up, and looks like document was sent to nowhere.. printer did not start to print at all. But other network devices starts to experience connection breaks and performance issues. When I returned to mixed mode, the communication between network devices returns to normal operation, but not with the printer - where I experiences original problems.
My network is quite complex - 4 laptops and 2 TV sets communicates (wireless or LAN 100mbit cable ) via cental router with NAS server (with DLNA) and internet (DSL cable modem). Router also works as DHCP server, where any server type devises (e.g my printer) has reserved IP addresses (based on MAC number). No matter if I try to print from wireless or via LAN cable laptop, no matter what OS is on laptop. I have even tried to connect the printer via LAN (forcing DHCP to give the LAN pronter the same IP as was previously for wireless ), and stil the same: communication is broked and the print starts and suddenly stops.., then starts angain after few minutes - and stops (the same problem as wireless). So I do not understand what the hell is going on. Rest of my network works perfect .. except this printer.. Any other idea, what coul be the issue?

Communication problem between external web server and SAP WebAS

Hello Experts,
We are having a serious problem over here where we had one external server is pushing XML string using a HTTP-POST request to our SAP WebAS server (a BSP application is handling this request). We are not able to see the request coming to SAP i.e. SAP-BSP is not receiving XML.
Also we found that, if request is routed through another proxy server (apache tomcat server redireting the request) connected through VPN to our network, it works but if the the same server is inside our network it doesn't. Rather in that case it never hits the Apache-Tomcat server itself.
We tried to identify the network issue but it seems it is not the network or any firewall issue. When we had a small Echo server (itu2019s a small Java server) running on our SAP machine, we could see the request coming in. So it is definitely reaching the SAP server but the SAP Web AS is not picking up. Rather what we found that if the URL is simple e.g. http://<hostname>:<port> it works but if the URL is complex like something generated by SAP incase of BSP application it doesn't.
Any idea what is causing this issue?
I tried to look at SMICM trace files but got nothing. Any idea where would find the trace of incoming HTTP requests to SAP WebAS?
Thanks in advance.
regards
rajeev

Hi Rajeev,
Pelase find the below link. i am not sure this is the exactly one for you. But i hope it'll help you.
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417800)ID0350917650DB11174011760851503410End?blog=/pub/wlg/10285
http://www.sap-img.com/basis/basis-faq.htm
Regards,
CSK.

Looking for a way to get my Product ID and Vendor ID so I can enable my Radium 49 USB MIDI keyboard to work with Labview 7

Looking for the Product ID and Vendor ID for my Radium 49 USB MIDI keyboard to work with Labview 7
Is there a tool to find out the Vendor ID and Product ID for a USB device?
Example: of what I'm looking for
The Product ID for National Instruments DAQPad-6020E is 0x12C0. The
USB vendor ID is 0x3923. This is a 16-bit hexadecimal number(1093)
(that is decimal 4243).
Thanks for all the fast responses this newsgroup RULES!!!!!!!!!!!!

http://digital.ni.com/public.nsf/allkb/335A90747734097886257070006415B9
How To Find The Vendor and Product ID for USB Devices?
Primary Software: Driver Software>>NI-VISA
Primary Software Version: 3.3.1
Primary Software Fixed Version: N/A
Secondary Software: N/A
Problem:
I want to make an NI-VISA driver that requires the vendor and product ID?
Solution:
There is a utility called USBView,
free from Windows, attached below, which you can use to view what is
connected to your computer's USB ports. It is necessary to load this
program and connect the USB device in development. Upon selecting the
device in USBView, one can then look on the right side of the
application window to obtain the Product ID and Vendor ID. This will
allow you to enter in the correct IDs when creating a driver .inf file
when using the VISA Driver Development Wizard. For more information
about how to use the VISA Driver Development Wizard see the related
links below.
Note: It is necessary to keep the hexadecimal
(0x####) format. Do not remove the "0x" hexadecimal format preceding
the ID number.

Communication problem between NetBeans and Tomcat

hi!
i got a quite mysterious problem. here is what happens:
- i start NetBeans 5.5.1 (the first time)
- i want to debug my JSF-Project, the Debugger starts
- After a few seconds the debugger waits for tomcat (it sais: "Waiting for Tomcat...") and tomcat starts
- Again after a few seconds the tomcat-debugger-output sais "Tomcat startet in 3333 ms".
okay.
when i enter http://localhost:8084/ in my browser i get the tomcat homepage, so the server has definitely started! But nothing happens in NetBeans and nothing happens with my project....
In the lower-right corner i see this blue working-bar that sais "deploying project" but nothing happens. The Project-Debugger-Output still sais "Waiting for Tomcat..." but nothing happens...
And after something around 3 minutes (i guess it's a timeout) i get the error "Starting of Tomcat failed." But is HAS started, i can login to the Administration-Area in my browser!
so i guess there is a communication problem between netbeans an tomcat. Netbeans waits for a message from tomcat but tomcat doesn't send it..or netbeans doesn't understand it.
But the story goes on:
When i press the debug-button a second time it takes only a few seconds till i get the message: "Tomcat server port 8084 already in use". OF COURSE! Because Tomcat has already startet and can't be stoped by NetBeans.
i'm trying to solve this problem for 4 days now, so i would be very happy if anyone has an idea where to start/continue the search...
thanks,
flo.
some system-info:
- windows vista business 32-bit
- no firewall is running
- AntiVir Personal Edition IS running
- Yahoo Widgets Engine IS running
- no other software is running
and finally the tomcat-log:
Using CATALINA_BASE: C:\Users\Administrator\.netbeans\5.5.1\apache-tomcat-5.5.17_base
Using CATALINA_HOME: C:\Program Files\NetBeans\enterprise3\apache-tomcat-5.5.17
Using CATALINA_TMPDIR: C:\Users\Administrator\.netbeans\5.5.1\apache-tomcat-5.5.17_base\temp
Using JRE_HOME: C:\Program Files\Java\jdk1.5.0_12
Listening for transport dt_shmem at address: tomcat_shared_memory_id
21.09.2007 18:27:50 org.apache.catalina.core.AprLifecycleListener lifecycleEvent
INFO: The Apache Tomcat Native library which allows optimal performance in production environments was not found on the java.library.path: C:\Program Files\Java\jdk1.5.0_12\bin;.;C:\Windows\system32;C:\Windows;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\ThinkPad\ConnectUtilities;C:\Program Files\Common Files\Teleca Shared;C:\Program Files\Common Files\Adobe\AGL;C:\Program Files\MySQL\MySQL Server 5.0\bin;C:\Program Files\cvsnt;
21.09.2007 18:27:50 org.apache.coyote.http11.Http11BaseProtocol init
INFO: Initializing Coyote HTTP/1.1 on http-8084
21.09.2007 18:27:50 org.apache.catalina.startup.Catalina load
INFO: Initialization processed in 1862 ms
21.09.2007 18:27:50 org.apache.catalina.core.StandardService start
INFO: Starting service Catalina
21.09.2007 18:27:50 org.apache.catalina.core.StandardEngine start
INFO: Starting Servlet Engine: Apache Tomcat/5.5.17
21.09.2007 18:27:50 org.apache.catalina.core.StandardHost start
INFO: XML validation disabled
21.09.2007 18:27:53 org.apache.coyote.http11.Http11BaseProtocol start
INFO: Starting Coyote HTTP/1.1 on http-8084
21.09.2007 18:27:54 org.apache.jk.common.ChannelSocket init
INFO: JK: ajp13 listening on /0.0.0.0:8009
21.09.2007 18:27:54 org.apache.jk.server.JkMain start
INFO: Jk running ID=0 time=0/31 config=null
21.09.2007 18:27:54 org.apache.catalina.storeconfig.StoreLoader load
INFO: Find registry server-registry.xml at classpath resource
21.09.2007 18:27:54 org.apache.catalina.startup.Catalina start
INFO: Server startup in 3626 ms

As i wrote before, the same problem occured for me. I have found a solution which is : Go to tools menu and then select options . In the proxy info, select No Proxy.
I hope this help you

I have a problem with my motherboard and my battery of my 2010 macbook pro 13". It was just serviced with a new screen, keyboard, and logic board.

I have a problem with my motherboard and my battery of my 2010 macbook pro 13". It was just serviced with a new screen, keyboard, and logic board. How much will a new battery and motherboard cost and would it be worth it or should I just get a new computer. It was about 300 dollars to get it serviced last week. if it adds up to much past 600 dollars I will just get a new one. THANKS FOR ANY HELP!
P.S During classes today it began beeping in my bag. Like three kind of long steady beeps then a short pause, and when I opened it I couldn't see anything but it was on so I turned it off and back on.

Depends on what options your Apple store offers - if they can do a depot repair (where they send it out), that's around $300 for all parts & labor.
If the store doesn't have that option, a logicboard is around $600, battery $80-$100, from what I've seen.
If they JUST replaced the logicboard, you absolutely should NOT have to pay for another replacement - the replacement is covered by a warranty. If they want you to pay for it, make sure you have a copy of the receipt for the work that was recently completed so you can show it to them. They have no reason to charge you for another logicboard.
~Lyssa

IMac won't recognise USB MIDI keyboard in Audio MIDI Setup

I upgraded earlier in the week from a G4 eMac to a new Intel iMac. All appeared well until I tried to use my Evolution MK-361 USB midi keyboard from inside Logic. No midi events were coming through the system.
After some fiddling around I found the Audio MIDI Setup utility and the keyboard is not listed as a device in there. However, if I open System Profiler and select the USB information I can see that the keyboard is connected. According to the E-Magic web site this model of keyboard is class compliant and so shouldn't need a driver installed.
Originally I had the keyboard plugged into a USB hub. I've tried restarting the machine, restarting the machine with the cable plugged into different USB ports and different USB cables plugged into different USB ports. I've also downloaded all the latest OS / firmware / application updates and installed them.
I reconnected the keyboard to my old eMac and it shows up on there so I know it's not a fault in the keyboard itself.
The only other bits of gear connected to the machine are a Lacie external hard drive and my Saffire but these are firewire device so I wouldn't expect them to cause a problem (they certainly didn't on the eMac).
If anyone has any ideas I would seriously appreciate the help. As you can imagine I'm pretty gutted having forked out a grand for the machine.
Cheers
Jon
iMac (Intel) Mac OS X (10.4.8)

Hi Jon
So much for plug and play
Yeah, it's great isn't it?
I emailed M-Audio tech support about it and apparently it's a known problem in 10.4.8 and they're waiting for a fix from Apple. I guess I'll just have to keep my eyes peeled for OS updates and go rummaging under the stairs for a midi cable instead.
Ho hum.
Jon

How do you connect a USB MIDI keyboard to iPad Air?

Hello,
I can't get my USB keyboards to connect to my iPad Air. I used to use the camera connection kit with my 1st gen iPad and it worked perfectly. Now when trying to connect using my camera connector plugged into a lightning to 30 pin adapter with the iPad Air I get no response when trying to use my keyboards with Garageband, etc. This seems like a step backwards!!!
Can anyone advise on how to use a USB MIDI keyboard with the iPad Air?
Thanks,
Richard

Same problem here...
I just read on another forum that someone managed to connect a midi device using a simple converter.
I have a digital piano with the square type USB connector, bought an adapter to convert the iPad Air's ligtning USB cable's USB end to that square connector, plugged it in, GarageBand did not respond to the Midi input.
on a macbook pro it works ok, but would be nice to use the iPad now that I bought it...

Help needed in connecting two midi keyboards to Logic Pro.

Hey there, I would like to connect two midi keyboards to Logic Pro and enable each keyboard to trigger separate software instruments each. For example, one keyboard has guitar and the other has strings.
I realise this must have something to do with midi channels or ports, however my knowledge is limited.
At current, I just have the two keyboards connected via usb straight to the computer. Is it possible I need a multi input or output interface, so that Logic can recognise different ports, or channels? Perhaps there is simply something I need to do in Logic itself? the keyboards are basic M-Audio midi controllers, just a usb port - thats it, no other connections. Any help would be great, Brad.

Hey Brad,
yes you need also to change the out midi of the keyboards.
in my case I have the Keysation 61 es, it's done this way:
"Channel
MIDI data from the keyboard can be sent on any of 16 MIDI Channels. However, certain MIDI devices and MIDI software applications require
the keyboard to send data on a speciﬁed channel. If this is the case, you can change the channel the data is sent using the following
method:
< Press the Advanced Functions button to engage Edit Mode.
< Press one of the 16 Channel keys from D1 to E3, according to the Channel that you need.
For example, if a device speciﬁes that you need to send data on Channel 10, press the Advanced Functions button, and then key F2 to select
Channel 10.
The Channel can also be assigned to the Octave “+” and “-” buttons. Once assigned, pressing “+” or “-” will increase or decrease the channel
incrementally. When Channel 16 is reached and “+” is pressed, Channel 1 will be selected. If the Octave “+” and “-” keys are selected to vary
the Channel, the lights above the buttons will not change, since it is not possible to have a Channel with a negative value. Pressing both the
“+” and “-” buttons together will recall Channel 1."
Can you please tell me what keyboards do you have?
this is for two players having a go on completely 2 different parts.
In case you want to record 2 tracks with the same content say a piano and a pad,
all you need to do is open the tracks and rec enable both and you have piano pad.
Anyway I believe you need to have two separate sounds for two players?
Give us some more input of what you want, there must have one or more solutions to what you need.
Cheers mate,
Jorge

Lightning to USB midi keyboard

Hi
Do I need the official apple lightning to female USB connector (or camera connector) or can I just plug in the cable that comes with the ipad 4 and iphone 5 straight into the USB midi keyboard...?
The latter doesn't work - any ideas why not?
Rgds,
Gary

I need to know the exact same thing. I'm planning to buy an iPhone 5 exactly to use it as a sound generator module (Garage Band alike). If it doesn't work, I'll have to find another solution. Android, maybe.

Audio Output Corruption when using USB MIDI keyboard controller

recently, i'm getting intermittent corrupted audio output (short blips of distortion) while playing through my usb midi keyboard. i thought maybe some data got corrupted on the disk over time so i wiped the drive, reinstalled osx, installed all updates, hooked up usb keyboard and all worked fine. today, i plugged in the keyboard and the distortions have reappeared. i unplugged the keyboard and played with the Musical Typing- still distorted. i rebooted and tried Musical Typing- still distorted. I removed the usb midi keyboard device from Audio MIDI Setup, rebooted, and the distortions have disappeared when using Musical Typing. Connecting the keyboard causes the distortions to reappear. I'm at a loss.
Any ideas?
environment:
macbook pro
osx 10.4.11
gb 4.1.2
studiologic vmk188 plus

UPDATE:
I decided to try going through an Firewire Audio Interface instead. Keyboard-(MIDI)->MOTU Traveler-(Firewire)->MacBook Pro.
Same corruption/hiccups/choppy playback.

Communication problem with Adobe 9.0 and HP Printer when I scan

I'm having a problem getting a .pdf file to come up when I scan from a HP 5610 All-in-one printer. Have uninstalled and reinstalled HP software three times but when I scan and want a pdf file it won't communicate with Adobe 9.0 reader for some reason. Is there a setting in Adobe reader that's a problem?
Thanks.

Thanks...found out that an HP5610xi All-in-One will not completely communicate with Adobe 9.0 Had to go to Adobe 6.0
Date: Thu, 17 Dec 2009 03:19:49 -0700
From: [email protected]
To: [email protected]
Subject: Communication problem with Adobe 9.0 and HP Printer when I scan
May be that the HP software doesn't support Adobe Reader 9.
>

I have connection problems between the mini ipad and my powerbook g4, you are not allowed to see or share applications.

I have connection problems between the mini ipad and my powerbook g4, you are not allowed to see or share applications.

That is not possible.

2 Problems with the Ipad Air...midi keyboard and usb microphone

IN SHORT:
2 Problems with the Ipad Air...what midi keyboard will connect to the lightning camera connector and what microphone as well? There seems to be issues with the ipad air not being able to power them. Has anyone got any devices to work yet?
IN DEPTH:
I have a yeti microphone that when I plug in it says its using too much power. A little samsung go mic I have plugs in find and works but isnt quite what im looking for. My midi keyboard is not reading...its probably 15yrs old (didnt expect it to work). I have ordered a usb powered keyboard but im now nervous it may not work if it requires too much power. Has anyone had any success with a particular model of keybaord? I saw a youtube video of the CME Xkey in which it was plugged into an ipad that uses the lightning jack, but was unsure if it was the air or a different model.
Any help is appreciated on this...I love my ipad air and hoping to make it my fully functional music recording device.
By the way I mostly use garageband

hey mate
Yes what I ended up doing is buying a powered usb hub. They are about 10 dollars or so on amazon.com. There are tons to choose from. I use a yeti micrphone now with no issues and a midi keyboard. You will need the lightning usb adapter too. You plug the lightning adapter into the ipad and the hub into the adapter then plug all your accessories into the powered hub. So it works well you just gotta buy an extra piece of equipment.

Communication problem between USB MIDI keyboard and logic

Similar Messages

Maybe you are looking for