Communication Problem in Mitsubushi PLC A2SH with OPC 4.5.1

While communicating with Mitsubushi PLC A2SH thru OPC 4.5.1 , it displays time out error , the settings of the Com port of the system is Baud = 9600, Parity = odd
Data bits = 8 Stop bits = 2, Flow Control = None . The same setting is done in the OPC & Mistubushi PLC Comm protocol. Iam using Labview DSC to communicate with PLC with OPC 4.5.1. How do i solve this Comm Problem in what steps.

You might increase the 'Recieve timeout' from 250ms to some higher values on the object (driver) and you might increase in Options >> Serial Ports... >> Receive Gap from 20 to a bigger value like 50.
Hope it helps.
Roland
PS: I've not tried it with this particular PLC, though.

Similar Messages

Its impossible to redeem my gift card. Is it commun problems like that? Maybe with the pin, or the card number?

I bought a gift card and im not sure why but its impossible to redeem. Maybe the nunber of the card is the problem or the pin.....
Is that commum? How can I solve this problem?
Thanks a lot

as far as I know iTunes gift cards are good for the App store or iTunes.
It could be operator error, typoing a number. It's also possible, for example, if you bought the card just a little bit ago it's possible that they just don't know it was sold yet.

Communication Problem with the second battery

Hello,
In Lenovo Solution Center it says that there is communiction problem with the second battery. I already had this problem some months ago, back then it didn't charge the second battery. I got a new one and it worked again. Now it says the same thing "communication problem", but i can charge the battery and I also can't find any other sign of something not working. But still- it seems weird that the program tells me something is wrong. Can somebody help me?
Thanks Lina

Hi, Lina
What is the machine type and model of your computer? Also, what operating system are you running?
Thanks in advance,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

Communication problem with proxy server

We have establish the configuration of an iPad to access the enterprise net, but when trying to access any webpage we get the next message: Safari can not open the page. Error:"There is a communication problem with proxy web server (HTTP)"
The access has no problems with other movile devices.
Ahy help?

Hi,
I am not sure whether you have already solved the problem or not....
Do the following to deploy MobileBIService.war file on tomcat
1.Stop Tomcat Web application server.
2.Copy the file, MobileBIService.war from [Install directory]\Mobile 14\Client to the Tomcat's "Webapps" directory.
In my case, I copied the MobileBIService.war from C:\Program Files (x86)\SAP BusinessObjects\Mobile14\Client to C:\Program Files (x86)\SAP BusinessObjects\Tomcat6\webapps. ( I used BO 4.0 SP02)
3. Start Tomcat.
Restarting Tomcat would automatically deploy war file as a Web App
One folder u201CMobileBiServiceu201D will appear in webapps folder when MobileBIService.war is deployed successfully.
Hope it helps.
Regards,
Ankur

COMMUNICATION PROBLEM WITH SCANNER TO COMPUTER OF DESKJET 3050 j610

WHEN i TRY TO SCAN USING MY DESKJET 3050 j610 A MESSAGE SHOWS 'COMMUNICATION PROBLEM NOT CONNECTED THEREFORE i AM NOT ABLE TO SCAN.
i HAVE BEEN TRYING TO RESOLVE THIS PROBLEM OVER 8 HOURS AND I' M GETTING SICK. I'VE TRIED EVERYTHING AVAILABLE ON THE SUPPORT PROGRAMS INCLUDING 'PAINT' AND NOTHING WORKS.
I NEED A ANSWER OR I;LL THROW THIS THING OUT

I have the same problem here, i have two PC's both running Windows 7 but only one works printing and scanning wirelessly.
On the PC running Windows 7 32bit wireless printing and scanning works great.
On the PC running windows 7 64bit only wireless printing works. Havent found a solution, but just a work around. Here it is......
1. Got to you printer and hit the Wireless button to find the IP address your router gave it.
2. Open up your Internet browser and input the IP address.
and...BAM!!! if it worked it should take you to the Deskjet 3050 All-in-One J610a Embedded Web Server page and from there you can scan with what looks like all the original options if the thing was working to begin with and save to your PC.

Communication problem with printer when using Parallels

OK, apologies if this has been asked elsewhere but I've been trawling the forum for an hour and have yet to find the exact problem that I'm having!
First of all, I'm a recent convert to Mac (hurrah I hear you all cry), secondly, I've set up Parallels to deal with some PC left-overs, thirdly, I've tried to use my old Dell printer and realised Dell doesn't support Macs (or not my AIO 922 anyway).
So, I thought I'd get round this by installing the drivers for the printer on the Windows partition, which all went well until I actually tried to print something... although the printer is visible and 'on-line', I get the box informing me there's a communation problem with the printer and computer.
It's beginning to wind me up so any info/advice would be greatly appreciated

This is either a Windows or a Parallels problem. For Parallels go to http://forum.parallels.com. For Windows go to the support forums at Microsoft.
There is no support for either product at these Discussions.

Communication problem with Adobe 9.0 and HP Printer when I scan

I'm having a problem getting a .pdf file to come up when I scan from a HP 5610 All-in-one printer. Have uninstalled and reinstalled HP software three times but when I scan and want a pdf file it won't communicate with Adobe 9.0 reader for some reason. Is there a setting in Adobe reader that's a problem?
Thanks.

Thanks...found out that an HP5610xi All-in-One will not completely communicate with Adobe 9.0 Had to go to Adobe 6.0
Date: Thu, 17 Dec 2009 03:19:49 -0700
From: [email protected]
To: [email protected]
Subject: Communication problem with Adobe 9.0 and HP Printer when I scan
May be that the HP software doesn't support Adobe Reader 9.
>

Hello!!!how can I control an omron plc (sysmac cqm1)with an OPC server?I want to adquire a signal controlling its amplitude and frecuency.How can it be done with OPC server?I already have the NI CD of OPC drivers.Thank you

Hello!!!how can I control an omron plc (sysmac cqm1)with an OPC server?I want to adquire a signal controlling its amplitude and frecuency.How can it be done with OPC server?I already have the NI CD of OPC drivers.Thank you

Hola Jose David, que OPC estas utilizando?, Si tienes comunicación entre tu computadora y PLC pero falla la comunicación entre el OPC y el PLC? La configuración y direcciones entre los dos es correcta? La comunicación es por cable serial?
Espero tus respuestas
Saludos
Benjamin C
Senior Systems Engineer // CLA // CLED // CTD

What can I do with this message: unable to download, Error getting license, License Sever Communication Problem

I am trying to download a library book (Epub ebook) into my Mac laptop. I have updated my Adobe Edition to 4.0. I keep getting this message
Unable to download, error getting License, License server communication Problem E_ACT_NOT_READY
I have gotten in touch with the library. They advised me to do the following:
Mac OS
Open Adobe Digital ! Editions.
Press Command+Shift+D to deauthorize Adobe Digital Editions.
Select Erase Authorization.
Click OK and Quit Adobe Digital Editions.
Navigate to /Users//Library/Application Support/Adobe/Digital Editions and drag the activation.dat file to the trash.
I am stuck on Erase Authorization. After I choose erase authorization another message pops up: Unable to Erase Authorization. Please try again after some time. I tried all day in fact I even went to the Apple Store where a staff member was also unable to get any further!!

Hi dagmar
See my answer at:
https://forums.adobe.com/thread/1716726
I think the problem is version 4!!
Adobe should solve the problem!!

Siemens S7 300 PLC Communicationnd with Labview

hi;
I'm trying to connect my PLC s300 with labview in my PC .
How can I proceed ?
what is the easiest way to do the communication knowing that I did the simulation using TCP/IP protocol with OPC server.
I have SIMATIC net station and CPU 315 2-DP
any suggestion?
I want to use OPC server with MPI can I do so ? amI supposed to add materials and what are those materials ?
Thanking in anticipation.

sivaramkumar wrote:
Hi.I am using a CP-343 communications processor
to connect the S7 300 to industrial ethernet. Now can I commnicate
directly from Labview to the PLC?We are plan to use ethernet communication (our TCP VI's).
Which type of command we need to ues. whether we need to form a MODBUS protocol command.
Siemens S7 supports all kinds of protocols. Some are built in from start and are usually Siemens specific protocols whose specs are not always easy to come by, others can be purchased and installed on the communication processor seperately such as Modbus. Once you have the Modbus library installed on your S7 you can simply use the Modbus VIs downloadable from the NI site to communicate with your S7 datablocks.
It is a strict IO access meaning you can read and write IO registers and memory datablocks, but not interfere with the actual programm on the S7 in other ways.
Using Modbus is simply and hard at the same time, since Modbus uses various datatypes with different address ranges that are mapped in some way to the items in the target hardware. This mapping can be tedious to work out correctly since the documentation of devices is sometimes quite a bit unclear about how exactly that has been done by the manufacturer.
There are many other Ethernet protocols that are available or can be installed on a S7 such as Profibus Ethernet, EtherCat, Industrial Ethernet, etc. Most of these while technically possible to be implemented on top of the native TCP LabVIEW nodes are rather complicated and therefore anything but trivial to create a VI library for.
Your best bet really is to either use Modbus or an OPC Server that implements the native access to the PLC.
Rolf Kalbermatter
Message Edited by rolfk on 03-12-2009 09:07 AM
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Communication problem between NetBeans and Tomcat

hi!
i got a quite mysterious problem. here is what happens:
- i start NetBeans 5.5.1 (the first time)
- i want to debug my JSF-Project, the Debugger starts
- After a few seconds the debugger waits for tomcat (it sais: "Waiting for Tomcat...") and tomcat starts
- Again after a few seconds the tomcat-debugger-output sais "Tomcat startet in 3333 ms".
okay.
when i enter http://localhost:8084/ in my browser i get the tomcat homepage, so the server has definitely started! But nothing happens in NetBeans and nothing happens with my project....
In the lower-right corner i see this blue working-bar that sais "deploying project" but nothing happens. The Project-Debugger-Output still sais "Waiting for Tomcat..." but nothing happens...
And after something around 3 minutes (i guess it's a timeout) i get the error "Starting of Tomcat failed." But is HAS started, i can login to the Administration-Area in my browser!
so i guess there is a communication problem between netbeans an tomcat. Netbeans waits for a message from tomcat but tomcat doesn't send it..or netbeans doesn't understand it.
But the story goes on:
When i press the debug-button a second time it takes only a few seconds till i get the message: "Tomcat server port 8084 already in use". OF COURSE! Because Tomcat has already startet and can't be stoped by NetBeans.
i'm trying to solve this problem for 4 days now, so i would be very happy if anyone has an idea where to start/continue the search...
thanks,
flo.
some system-info:
- windows vista business 32-bit
- no firewall is running
- AntiVir Personal Edition IS running
- Yahoo Widgets Engine IS running
- no other software is running
and finally the tomcat-log:
Using CATALINA_BASE: C:\Users\Administrator\.netbeans\5.5.1\apache-tomcat-5.5.17_base
Using CATALINA_HOME: C:\Program Files\NetBeans\enterprise3\apache-tomcat-5.5.17
Using CATALINA_TMPDIR: C:\Users\Administrator\.netbeans\5.5.1\apache-tomcat-5.5.17_base\temp
Using JRE_HOME: C:\Program Files\Java\jdk1.5.0_12
Listening for transport dt_shmem at address: tomcat_shared_memory_id
21.09.2007 18:27:50 org.apache.catalina.core.AprLifecycleListener lifecycleEvent
INFO: The Apache Tomcat Native library which allows optimal performance in production environments was not found on the java.library.path: C:\Program Files\Java\jdk1.5.0_12\bin;.;C:\Windows\system32;C:\Windows;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\ThinkPad\ConnectUtilities;C:\Program Files\Common Files\Teleca Shared;C:\Program Files\Common Files\Adobe\AGL;C:\Program Files\MySQL\MySQL Server 5.0\bin;C:\Program Files\cvsnt;
21.09.2007 18:27:50 org.apache.coyote.http11.Http11BaseProtocol init
INFO: Initializing Coyote HTTP/1.1 on http-8084
21.09.2007 18:27:50 org.apache.catalina.startup.Catalina load
INFO: Initialization processed in 1862 ms
21.09.2007 18:27:50 org.apache.catalina.core.StandardService start
INFO: Starting service Catalina
21.09.2007 18:27:50 org.apache.catalina.core.StandardEngine start
INFO: Starting Servlet Engine: Apache Tomcat/5.5.17
21.09.2007 18:27:50 org.apache.catalina.core.StandardHost start
INFO: XML validation disabled
21.09.2007 18:27:53 org.apache.coyote.http11.Http11BaseProtocol start
INFO: Starting Coyote HTTP/1.1 on http-8084
21.09.2007 18:27:54 org.apache.jk.common.ChannelSocket init
INFO: JK: ajp13 listening on /0.0.0.0:8009
21.09.2007 18:27:54 org.apache.jk.server.JkMain start
INFO: Jk running ID=0 time=0/31 config=null
21.09.2007 18:27:54 org.apache.catalina.storeconfig.StoreLoader load
INFO: Find registry server-registry.xml at classpath resource
21.09.2007 18:27:54 org.apache.catalina.startup.Catalina start
INFO: Server startup in 3626 ms

As i wrote before, the same problem occured for me. I have found a solution which is : Go to tools menu and then select options . In the proxy info, select No Proxy.
I hope this help you

Communication problem the web server extension (WGATE) failed to receive a

Hi,
When a user tries to access his timesheet he get the below error:
<b>communication problem the web server extension (WGATE) failed to receive a response from the ITS web service</b>
Only ONE user is getting this error. If everyone get\s the same we can check on the ITS side, but if only ONE user is getting it.
Please help.
Regards,
PK

HI ALL,
Thanks for your time. The issue got resolved however without cheking the logs itself. The problem was with the scripfile. All other users and all other scripts were working, except one. And it got recified.
Regards,
P. Kumaravel.

Communication problem

Hi, I think I have a communication problem between the servers in a cluster,
          I attached a picture of the administration console where it seems that one
          server in the cluster cant communicate with the other.
          (one server is running on Windows and the other on Linux)
          Any ideas to solve this problems?
          Thanks
          [console.jpg]


Using multicastTest I found that the messages that the windows machine
          produces are lost. Nobody receives that messages.
          I don't know what might be happening
          cheers
          "Campot" <[email protected]> escribió en el mensaje
          news:[email protected]..
          > Hi, I think I have a communication problem between the servers in a
          cluster,
          > I attached a picture of the administration console where it seems that one
          > server in the cluster cant communicate with the other.
          > (one server is running on Windows and the other on Linux)
          >
          > Any ideas to solve this problems?
          > Thanks
          >
          >
          >

Communication problem, deskjet 920c

I received a note for a repair to a communications problem for my printer. When I tried to download it, I got to a "dot4 scrubber" which stalled everything. I had to reboot my computer to get rid of the note.

Hi robincom2,
Thank you for joining the HP Support forums. I understand that you received a message about a communications issue with your printer.
I have included a document with the trouble shooting steps you need to take to resolve the issue. I know that you weren't installing the printer when you received the error, but it's the trouble shooting steps that are important. Please follow the instructions for Steps one and two, as the software is already installed you shouldn't need to follow Step three.
Software Installation Stops Without Warning and With No Error Message
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

My apple tv mirroring is slow. So slow it shuts off. Any thoughts on cause? I use this device in my office for presentations without a problem. In my home with a stronger wifi router, I'm having issues.

My apple tv mirroring is slow. So slow it shuts off. Any thoughts on cause? I use this device in my office for presentations without a problem. In my home with a stronger wifi router, I'm having issues.

Welcome to the Apple Community.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

Communication Problem in Mitsubushi PLC A2SH with OPC 4.5.1

Similar Messages

Maybe you are looking for