Communication problem the web server extension (WGATE) failed to receive a

Hi,
When a user tries to access his timesheet he get the below error:
<b>communication problem the web server extension (WGATE) failed to receive a response from the ITS web service</b>
Only ONE user is getting this error. If everyone get\s the same we can check on the ITS side, but if only ONE user is getting it.
Please help.
Regards,
PK

HI ALL,
Thanks for your time. The issue got resolved however without cheking the logs itself. The problem was with the scripfile. All other users and all other scripts were working, except one. And it got recified.
Regards,
P. Kumaravel.

Similar Messages

  • An error occured while communicating with the web server

    hi Experts
    Im having a problem with bpc when i try to send data in an input schedule
    message error prompt
    "an error occured while communicating with the webserver"
    Any body encounters this?
    Thanks

    Hi,
    I am from support team, so this is the method how I troubleshoot this kind of issue.
    First, I would like to say that this error message in BPC for Excel is a very common error, and it means nothing. Please move on the following steps:
    1. Reproduce the issue again.
    2. Logon to ABAP side, go to RSA1. Enter OBJECT=UJ* and SUBOBJECT=UJQ.
    Note: UJQ means query related. The same, you can use UJD to filter all Data Manager's activity.
    3. Under UJQ, you will find the log, which you reproduced in step 1. It must be shown as Red. Double-click it. See what the error message is.
    4. Besides the error, right-side, you will see a Details button. Click on it, and another window with MDX Statement will show up.
    5. Copy the MDX statement out for next usage.
    6. Go to another T-code MDXTEST (this is a test tool for MDX statement).
    7. Copy the MDX statement into MDXTEST, and run it. (find the run button at above).
    What is the error message?
    Based on my experience, if this is a Time out error, related to MDX Paser, you can try note:
    1032461 MDX parser does not start
    If not, it must be a specific error. Need to check further, accordingly.

  • Safari cannot open the page ~ The error was: "There was a problem communicating with the web proxy server (HTTP)

    Help!  I was cruzing along just fine and went out tonight only to receive the message above:
    Cannot open Page
    Safari cannot open the page
    The error was: "There was a problem communicating with the web proxy server (HTTP)."
    I have had all the Apple iPhone phone.  Have never encountered anything like this. 
    All systems are GO as soon as I log on to wifi. 
    Can anyone help, please. 

    I am also fixed.  I also loaded Onavo, but that was the other day ... this is what I did with the help of online chat with AT&T ...
    I went to:
    Settings
    Wifi
    I selected the network I was working on by hitting the blue arrow located on right side
    At the detail page of that network I scolled down to the bottom to find HTTP Proxy boxes
    I was on Off and changed it to Auto and it worked! 
    I was soo jazzed!!
    Instructions said if it was already on AUTO, to change it to Manual and make your Port = 80 but I didn't have to do that!
    YIPPIE!!  I'm a new man!!
    Go to settings -----> WI-FI  -----> select the network you're using  ------> hit the blue arrow located on the right-side of the network name (ie: show details of that network), this takes you to another page.  
    --------> at the bottom of the page you'll see "HTTP Proxy" boxes (located below the "renew lease" button) ---------------> change the proxy to AUTO.   Note: if you're already at AUTO, change it to "Manual" and make your Port = 80.

  • The form cannot be submitted to the Web server either because your computer is offline or because the host server is currently unavailabl. If this problem persists, contact your network administrator.

    Hi,
    When the page is submitted for approval by using SharePoint OOTB Page Approval Workflow, it takes quite long time and prompt error message as below.
    "The form cannot be submitted to the Web server either because your computer is offline or because the host server is currently unavailable.
    If this problem persists, contact your network administrator."
    It only happens in Internet Explorer version 8 and 9. IE version below 8 is not used in environment.
    But it is working in Firefox.
    Please help me on how to fix this issue.
    Thanks.

    Hi Htet,
    Here are some articles with the same issue message, you can check the setting of Link Translation rule in the ISA from below.
    http://sharepointontop.blogspot.com/2012/06/form-cannot-be-submitted-to-web-server.html
    http://bytelab.blogspot.com/2008/03/problem-submitting-infopath-forms-using.html
    http://social.msdn.microsoft.com/forums/en-IE/sharepointcustomizationprevious/thread/84be34b3-b806-49ce-a5c2-b5ad8a1ff09f
    Thanks
    Daniel Yang
    TechNet Community Support

  • 502 - Web server received an invalid response while acting as a gateway or proxy server. There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream cont

    I am getting error while accessing url of lyncweb.domain.com, dialin.domain.com and meet.domain.com pointing to RP server.
    502 - Web server received an invalid response while acting as a gateway or proxy server.
    There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream content server, it received an invalid response from the content server.
    Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

    When i try with https://lyncfrontend.domain.local:4443 and https://lyncfrontend.domain.com:4443 both opens but when i open the external domain name i get certificate .
    ARR version installed is 3.0
    To throw more light on the configuration:
    Lync 2013 implemented, internal domain name is : domain.local and external domain name is : domain.com
    All servers in VMs are with 4 core processor, 24gb ram, 1TB drive.
    Frontend : Windows 2012r2 with Lync 2012 Standard Edition - 1 No (192.168.10.100)
    Edge : Windows 2012 with Lync 2012 Std - 1 No 
    (192.168.11.101 DMZ) in workgroup
    ISS ARR Reverse Proxy 3.0 : Windows 2012 with ARR and IIS configured. (192.168.11.102)
    Certificate : Internal Domain root CA for internal and External (Digicert).
    Internal Network : 192.168.10.x /24
    External Network (DMZ) : 192.168.11.x /24
    Public Firewall NAT to DMZ ip for firewall and RP server. So having two public IP facing external network.
    Edge has : sip.domain.com, webconf.domain.com, av.domain.com
    IIS ARR RP server has : lyncdiscover.domain.com, lyncweb.domain.com, meet.domain.com, dialin.domain.com
    Have created SRV record in public : _sip.tls.domain.com >5061>sip.domain.com, _sipfederationtls._tcp.domain.com>5061>sip.domain.com, _xmpp-server._tcp.domain.com>5269>sip.domain.com
    Installed frontend server using MS Lync server 2013 step by step for anyone by Matt Landis, Lync MVP.
    Internal AD Integrated DNS pointing Front-end
    Type of Record FQDN
    IP Description 
    A sip.domain.com
    192.168.10.100 Address internal Front End  or Director for internal network clients 
    A admin.domain.com
    192.168.10.100 URL Administration pool
    A DialIn.domain.com
    192.168.10.100 URL Access to Dial In 
    A meet.domain.com
    192.168.10.100 URL of Web services meeting
    A lyncdiscoverinternal.domain.com
    192.168.10.100 Register for Lync AutoDiscover service to internal users
    A lyncdiscover.domain.com
    192.168.10.100 Register for Lync AutoDiscover service to external users  
    SRV Service: _sipinternaltls Protocol: _tcp Port: 5061
    sip.domain.com Record pointer services to internal customer connections using TLS 
    External DNS pointing Edge & Proxy
    Type of Record FQDN
    IP Endpoint
    A sip.domain.com
    x.x.x.100 Edge
    A webconf.domain.com
    x.x.x.100 Edge
    A av.domain.com
    x.x.x.100 Edge
    SRV _sip._tls.domain.com
    sip.domain.com: 443 Edge
    SRV _sipfederationtls._tcp.domain.com
    sip.domain.com:5061 Edge
    A Meet.domain.com
    x.x.x.110 Reverse Proxy
    A Dialin.domain.com
    x.x.x.110 Reverse Proxy
    A lyncdiscover.domain.com
    x.x.x.110 Reverse Proxy
    A lyncweb.domain.com
    x.x.x.110 Reverse Proxy
    In IIS ARR proxy server following server farms are added and configured as per link ttp://y0av.me/2013/07/22/lync2013_iisarr/
    In proxy server had setup only following server farm : While running remote connectivity web service test : meet, dialin, lyncdiscover and lyncweb.
    The client inside works fine internally and through vpn. Login with external client also working fine. But we are getting error in MRCA as follows.
    a) While testing remote connectivity for lync getting error : The certificate couldn't be validated because SSL negotiation wasn't successful. This could have occurred as a result of a network error or because of a problem with the certificate installation.
    Certificate was installed properly.
    b) For remote web test under Lync throws error : A Web exception occurred because an HTTP 502 - BadGateway response was received from IIS7.
    HTTP Response Headers:
    Content-Length: 1477
    Content-Type: text/html
    Date: Wed, 14 May 2014 10:03:40 GMT
    Server: Microsoft-IIS/8.0
    Elapsed Time: 1300 ms.
    Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

  • Dreamweaver CS3 fails when publishing to the web server using WebDAV

    Dreamweaver CS3 fails when publishing to the web server using
    WebDAV
    using an earlier version (7.x/8.x) works fine.
    Does anybody know if there is a solution for this.. This is
    urgent..
    Attempting to call the 1-800-833-6687 number fails with:
    recording, music, rings as though someone will finally answer, but
    gets a few dial tones and connection goes silent..
    Thanks
    J.

    If all of your credentials are correct, Server Name/IP Address, Username, Password, Root Directory and it's still not connecting, I would try toggling the Passive FTP checkbox.
    If you still can't connect in DW, try downloading a third party FTP program like Filezilla (free) and uploading there. If the third party app doesn't work either, there is likely a problem with your credentials and you would need to contact your hosting provider to straighten it out.

  • Problem in starting the web-server after configuring .so on AIX

    I am trying to configure a .so file in iplanet fasttrack web server 4.1 on AIX 4.3. I have build the .so file on IBM AIX 4.3. But while starting the web-server it failed to start.It fails when I include the following in obj.conf "Init fn="test-init" config="ConfigFile". While starting web-server I got the following :
    server terminated (signal 11): watchdog is restarting it
    failure: server initialization failed
    Any pointers on this would be helpful.

    I got similar errors in the past when the web server process was running in the background. Sometimes shutting down WAS does not work.
    Before you start WAS ensure that no java process is running or better try rebooting.

  • How do you failover the web server?

    I have 2 servers running the web server on them. If one of them fails how do I reroute the users requests to the other one, seamlessly to the user? I am new to using the web server so any help, even remedial would help!! Thanks!

    Ya, thats part of the problem. Right now we are using Sun Cluster to provide a network resource that handles which web server is to handle the request. A virtual ip address so to speak. We'd like to stop using Sun Cluster as it's a bit unstable, ie reboots the cluster randomly without error messages or warnings. We'd like to just use the web server/application server clustering capabilities and eleviate the extra layer of complexity with Sun Cluster. I know Sun Cluster has a Web Server agent to do this, but that is why we're trying to not go down that road. It is starting to sound like we may have to though as buying additional hardware isn't an option.

  • IPlanet 7.0.15 on Red Hat - Problems starting web server

    I completed the installation of iPlanet 7.0.15 on Red Hat Linux 5. The Admin server starts fine, however when I attempt to start the web server I get the following error:
    Oracle iPlanet Web Server 7.0.15 B04/19/2012 21:52
    catastropheinfo: CORE3282: stdout: Error occurred during initialization of VM
    info: CORE3282: stdout: Unable to load native library: /opt/Apps/libjava.so: cannot open shared object file: No such file or directory
    : CORE4005: Internal error: unable to create JVM
    failure: server initialization failed
    I am not sure what is causing this error? I selected the default, "Install JDK that is provided with iPlanet" and it is located in directory:
    /opt/Apps/Oracle/webserver7/jdk
    I am not sure why the native library in /opt/Apps/libjava.so is being referenced.
    I have tried several things including installing Java in /usr/bin from a download from Oracle. It appears to work just fine.
    I have installed and reinstalled - same problem.
    Any ideas?

    Okay this one turned out to be fairly simple. It was a permissions issue. One of my top level directories (/opt/Apps/Oracle) did not have world execute permissions. Once I changed the directory permissions the web server came up fine. It only took me 5 days to find this and fix it.

  • VIP Failover at the web server level??

    Oracle10gR2
    RHEL 4 AS 64bit
    Hi,
    I wanted to know is the VIP failover at the web server level also? For example, we are running Apex and that uses Apache/HTTP webserver, if that were to go down on one node, would it failover to the other node? Or is it not at the webserver level?
    Thank you.

    Yes, thank you for the documentation.
    However, I had one question about an action script that is in the following documentation:
    http://www.oracle.com/technology/products/database/clustering/pdf/Using_Oracle_Clusterware_to_protect_Oracle_Application_Server.pdf
    In there in APPENDIX B is a script called webcache_action.scr. I modified this script to use in our environment to start and stop the http_server process. We have been having some problems with it...mainly when it fails over, it shuts down the http server, then brings it back up, then down again. This is happening in a production system so it's a big issue. My question is can you explain to me why that is happening and maybe also explain what the script is doing? Maybe I'm missing something. Do I even need to have the stop part in the script? All we need to do is when it fails over to startup the http server on the node, that's it! Any help would be appreciated.
    #!/bin/bash
    SCRIPT=$0
    ACTION=$1
    # Action (start, stop or check)
    ORA_OWNER=oracle
    # ORACLE installation owner
    ORA_HTTP_HOME=/opt/app/oracle/product/10.2.0/http_1
    # ORACLE_HOME of HTTP Server
    RET1=1
    # Internal return values ( do not change )
    RETVAL=1
    # Script return value
    # Main section of Action Script - starts, stops, or checks an application
    # This script is invoked by CRS when managing the application associated
    # with this script.
    # Argument: $1 - start | stop | check
    # Returns: 0 - successful start, stop, or check
    # 1 - error
    # Start section - start the process and report results
    case $1 in
    'start')
    ulimit -n 65536
    ulimit -u unlimited
    echo "DATE: `date`" >> /tmp/e
    echo "ulimit: `ulimit -n`" >> /tmp/e
    echo "ulimit: `ulimit -u`" >> /tmp/e
    # A) START - HTTP Server:
    $ORA_HTTP_HOME/opmn/bin/opmnctl startproc ias-component=HTTP_Server 1>/dev/null 2>&1
    RET1=$?
    # Prepare return values:
    if [ ${RET1:-0} -eq 0 ]; then
    RETVAL=0
    else
    RETVAL=1
    fi
    # Stop section - stop the process and report results
    'stop')
    # A) STOP - HTTP Server:
    $ORA_HTTP_HOME/opmn/bin/opmnctl stopproc ias-component=HTTP_Server 1>/dev/null 2>&1
    RET1=$?
    # Prepare return values:
    if [ ${RET1:-0} -eq 0 ]; then
    RETVAL=0
    else
    RETVAL=1
    fi
    echo "usage: $0 {start stop}"
    esac
    echo "RETURN: $RETVAL" >> /tmp/e
    # Return value to CRS daemon:
    echo "RETVAL: $RETVAL" >> /tmp/e
    if [ $RETVAL -eq 0 ]; then
    exit 0
    else
    exit 1
    fi
    #exit 0

  • ColdFusion 8 Web Server Config tool fails

    The Web Server Configuration tool has worked in the past on
    my dev server under Sun ONE Java System Server, but it fails when I
    try to start the tool. The message returned is:
    exception in thread main java.lang.unsatisfiedlinkerror:
    sun.awt.windows.wcanvaspeer
    I've Googled this message and see that a few others have
    encountered the same issue, but did not see any resolution. Any
    help would be greatly appreciated.

    I am having this same problem. I have uninstalled Windows
    Defender and disabled Windows Firewall and no matter what I do, the
    wsconfig utility does not find any servers on localhost. I do get
    the Add/Exit buttons, but when I click Add, I don't get anything.
    I've modified C:/CFusionMX7/runtime/lib/security.properties
    to include:
    jrun.trusted.hosts=localhost,127.0.0.1
    Which jndi.properties should I look at?
    C:\CFusionMX7\runtime\lib\client\CLIENT-INF or
    C:\CFusionMX7\runtime\servers\coldfusion\SERVER-INF
    Should either of these files be modified?
    Restarting Coldfusion has not made a difference.

  • How can you display a dynamically loaded vi to the Web Server?

    I am working with LabView 6.1 and the Web Server. I can call a subvi and have it display on a remote machine using a browser with no problem. But what I would like to do is dynamically load and run a vi and have it display on the remote computer using only a browser. I have tried a small example of a front panel that invokes the run vi method (and fp.open prop) on another vi when a button is pressed, but the invoked vi is displayed only on the local computer. Is there any way of viewing dynamically loaded vi's on a remote machine without having a copy of LabView running on it?

    If i understand your question correctly, you want to monitor vi that are dynamically loaded on a remote machine without having LabVIEW installed on the machine from witch you want the monitor. I don't think it's possible how ever a good reference book would be Internet applications in LabVIEW. You can find it on BARNES&NOBLE.
    Hope i could help

  • How can I make the web server work on port 80 and not 443. I can only access my website using https.

    On a Mac Mini server with OS X Lion 10.7.2, I am unalbe to get the web server working on port 80. It switches automatically to port 443 (https).
    This situation complicates the access to FileMaker Web publishing, as I don't want my clients having to use https.
    How can I change that? Does anyone know?
    Thanks for any reply

    in the server: I checked the SSL certificate. Tried several configuration.
    Well, that's a problem for a start.
    Your port 80 connection should NOT use SSL. Port 80 is the standard HTTP port, not HTTPS and most applications that connect to port 80 will not expect to use SSL
    If you want to run a site under both HTTP and HTTPS then you create two sites, one on port 80 without SSL and one on port 443 with SSL

  • "An error occurred in the communication with the BW server"

    Hi, when I open BEx Analyzer and try to connect to my BW server to run a query, I get this message, "An error occurred in the communication with the BW server".
    Can someone help me.
    thanks
    Pat.

    If it's happening consistently, it could be a problem with your local m/cs  MS office and/or SAP GUI.
    If it was working before:
    1) Uninstall  SAP GUI and  MS office.
    2) Install  MS Office and SAP GUI...then try to connect to BW.
    Good luck, BB

  • Imp:How to find out whether client authentication Enabled on the Web Server

    Hi,
    I am trying to find out whether the Client Authentication Enabled on the Web Server or not.
    Reason for doing this, if we have two certificates in the key store which will authenticate the Web Server, JSSE Authentication will always take the first cert from the keystore. If the first Certificate is Expired, it will fail while doing the HandShake.
    So if I can find out whether Client Authentication is Enabled or not, then I can prompt a dialog for the user to select the Certificate for the Hand Shake.
    Thanks in advance for any Response,
    Krish.

    AUTH_TYPE will tell you only if it SSL or not. It won't say whether the Client Certificates Required for SSL Connection.
    Also, AUTH_TYPE is not part of the Http Headers.
    If there is any other solution, greatly appreciated.
    Thanks
    Krish.

Maybe you are looking for