Communication problem with Modbus object in Lookout 3.8

What means the error code 06 besides the following alarm message NO COMMUNICATION RESPONSE FROM MODBUS SECONDARY ? Lookout runtime-express version 3.8 build 7

Greetings,
The alarm message "No Communication response from modbus secondary" means that communication cannot be established between the modbus object and your external device. Verify that you have set up the serial port settings properly and that you have configured the modbus object. Verify that your external device is functioning properly and connected to the PC. If all of these things are ok, you may need to increase the receive gap of the serial port settings and the receive timeout of the modbus object. There is a tutorial on the web which outlines the troubleshooting steps for communication in Lookout.
http://zone.ni.com/devzone/conceptd.nsf/webmain/033CD84BAC7E1E7586256A3300756284?opendocument
I hope this information is helpful. Have a good day!
Patrick R.

Similar Messages

Communication problem with proxy server

We have establish the configuration of an iPad to access the enterprise net, but when trying to access any webpage we get the next message: Safari can not open the page. Error:"There is a communication problem with proxy web server (HTTP)"
The access has no problems with other movile devices.
Ahy help?

Hi,
I am not sure whether you have already solved the problem or not....
Do the following to deploy MobileBIService.war file on tomcat
1.Stop Tomcat Web application server.
2.Copy the file, MobileBIService.war from [Install directory]\Mobile 14\Client to the Tomcat's "Webapps" directory.
In my case, I copied the MobileBIService.war from C:\Program Files (x86)\SAP BusinessObjects\Mobile14\Client to C:\Program Files (x86)\SAP BusinessObjects\Tomcat6\webapps. ( I used BO 4.0 SP02)
3. Start Tomcat.
Restarting Tomcat would automatically deploy war file as a Web App
One folder u201CMobileBiServiceu201D will appear in webapps folder when MobileBIService.war is deployed successfully.
Hope it helps.
Regards,
Ankur

Communication problem with printer when using Parallels

OK, apologies if this has been asked elsewhere but I've been trawling the forum for an hour and have yet to find the exact problem that I'm having!
First of all, I'm a recent convert to Mac (hurrah I hear you all cry), secondly, I've set up Parallels to deal with some PC left-overs, thirdly, I've tried to use my old Dell printer and realised Dell doesn't support Macs (or not my AIO 922 anyway).
So, I thought I'd get round this by installing the drivers for the printer on the Windows partition, which all went well until I actually tried to print something... although the printer is visible and 'on-line', I get the box informing me there's a communation problem with the printer and computer.
It's beginning to wind me up so any info/advice would be greatly appreciated

This is either a Windows or a Parallels problem. For Parallels go to http://forum.parallels.com. For Windows go to the support forums at Microsoft.
There is no support for either product at these Discussions.

Communication problem with Adobe 9.0 and HP Printer when I scan

I'm having a problem getting a .pdf file to come up when I scan from a HP 5610 All-in-one printer. Have uninstalled and reinstalled HP software three times but when I scan and want a pdf file it won't communicate with Adobe 9.0 reader for some reason. Is there a setting in Adobe reader that's a problem?
Thanks.

Thanks...found out that an HP5610xi All-in-One will not completely communicate with Adobe 9.0 Had to go to Adobe 6.0
Date: Thu, 17 Dec 2009 03:19:49 -0700
From: [email protected]
To: [email protected]
Subject: Communication problem with Adobe 9.0 and HP Printer when I scan
May be that the HP software doesn't support Adobe Reader 9.
>

Problem with embedded objects

Hi,
I have problem with embedded objects which contained embedded objects.
When I create an Object in the persistent memory and commit this object I get the following error:
ORA-22805: cannot insert NULL object into object tables or nested tables
In the constructor of my persisten object I create the embedded members in the transient memory:
ATestPersObj::ATestPersObj() : m_count(0), m_lang(NULL), m_cost(NULL) {
m_lang = new AEnumLanguage_OraType();
m_cost = new AAmount_OraType();
}Or when I dereference a reference I get this error:
ORA-00600: internal error code, arguments: [kokeicadd2], [16], [5], [], [], [], [], []
Can somebody give me a hint?
I've defined the following Type:
CREATE OR REPLACE TYPE AENUM_ORATYPE AS OBJECT (
                         VALUE NUMBER(10,0)
                       ) NOT FINAL ;
CREATE OR REPLACE TYPE AENUMLANGUAGE_ORATYPE UNDER AENUM_ORATYPE (
                       ) FINAL " );
CREATE OR REPLACE TYPE ACURRENCY_ORATYPE AS OBJECT (
                         ISONR          NUMBER(5,0)
                       ) FINAL ;
CREATE OR REPLACE TYPE AAMOUNT_ORATYPE AS OBJECT (
                         CCY        ACURRENCY_ORATYPE,
                         LO32BITS   NUMBER(10,0),
                         HI32BITS   NUMBER(10,0)
                       ) NOT FINAL ;
CREATE OR REPLACE TYPE ATESTPERSOBJ AS OBJECT (
                         COUNT    NUMBER(4),
                         LANG     AENUMLANGUAGE_ORATYPE,
                         COST     AAMOUNT_ORATYPE
                       ) FINAL ;
oracle::occi::Ref<ATestPersObj> pObjR = new(c.getConnPtr(), "TTESTPERSOBJ") ATestPersObj();
pObjR->setCount(i+2001);
pObjR->setLang(AEnumLanguage(i+1));
pObjR->setCost(AAmount(ACurrency(), 2.5));
c.commit();
c.execQueryRefs("SELECT REF(a) FROM TTESTPERSOBJ a", persObjListR);
len = persObjListR.size();
{for (int i = 0; i < len; i++) {
oracle::occi::Ref<ATestPersObj> pObjR = persObjListR;
pObjR->getCount();
pObjR->getLang();
c.commit();
With kind regards
Daniel
Message was edited by:
DanielF
Message was edited by:
DanielF

Hi,
I have problem with embedded objects which contained embedded objects.
When I create an Object in the persistent memory and commit this object I get the following error:
ORA-22805: cannot insert NULL object into object tables or nested tables
In the constructor of my persisten object I create the embedded members in the transient memory:
ATestPersObj::ATestPersObj() : m_count(0), m_lang(NULL), m_cost(NULL) {
m_lang = new AEnumLanguage_OraType();
m_cost = new AAmount_OraType();
}Or when I dereference a reference I get this error:
ORA-00600: internal error code, arguments: [kokeicadd2], [16], [5], [], [], [], [], []
Can somebody give me a hint?
I've defined the following Type:
CREATE OR REPLACE TYPE AENUM_ORATYPE AS OBJECT (
                         VALUE NUMBER(10,0)
                       ) NOT FINAL ;
CREATE OR REPLACE TYPE AENUMLANGUAGE_ORATYPE UNDER AENUM_ORATYPE (
                       ) FINAL " );
CREATE OR REPLACE TYPE ACURRENCY_ORATYPE AS OBJECT (
                         ISONR          NUMBER(5,0)
                       ) FINAL ;
CREATE OR REPLACE TYPE AAMOUNT_ORATYPE AS OBJECT (
                         CCY        ACURRENCY_ORATYPE,
                         LO32BITS   NUMBER(10,0),
                         HI32BITS   NUMBER(10,0)
                       ) NOT FINAL ;
CREATE OR REPLACE TYPE ATESTPERSOBJ AS OBJECT (
                         COUNT    NUMBER(4),
                         LANG     AENUMLANGUAGE_ORATYPE,
                         COST     AAMOUNT_ORATYPE
                       ) FINAL ;
oracle::occi::Ref<ATestPersObj> pObjR = new(c.getConnPtr(), "TTESTPERSOBJ") ATestPersObj();
pObjR->setCount(i+2001);
pObjR->setLang(AEnumLanguage(i+1));
pObjR->setCost(AAmount(ACurrency(), 2.5));
c.commit();
c.execQueryRefs("SELECT REF(a) FROM TTESTPERSOBJ a", persObjListR);
len = persObjListR.size();
{for (int i = 0; i < len; i++) {
oracle::occi::Ref<ATestPersObj> pObjR = persObjListR;
pObjR->getCount();
pObjR->getLang();
c.commit();
With kind regards
Daniel
Message was edited by:
DanielF
Message was edited by:
DanielF

Problem with inherited Objects

Hi,
I have a problem with inherited objects inside Flex using
wsdl as the source of the object. The AS-classes are generated
inside Flex Builder 3.
Inside the wsdl I have 2 complex types:
<complexType abstract="true" name="PersistentObject">
<sequence>
<element name="id" nillable="true" type="xsd:string"/>
<element name="insertTimeStamp" nillable="true"
type="xsd:dateTime"/>
<element name="insertUsername" nillable="true"
type="xsd:string"/>
<element name="updateTimeStamp" nillable="true"
type="xsd:dateTime"/>
<element name="updateUsername" nillable="true"
type="xsd:string"/>
</sequence>
</complexType>
and
<complexType name="Contact">
<complexContent>
<extension base="tns3:PersistentObject">
<sequence>
<element name="birthday" nillable="true"
type="xsd:dateTime"/>
<element name="firstName" nillable="true"
type="xsd:string"/>
<element name="lastName" nillable="true"
type="xsd:string"/>
<element name="middleName" nillable="true"
type="xsd:string"/>
<element name="newPassword" nillable="true"
type="xsd:string"/>
<element name="password" nillable="true"
type="xsd:string"/>
<element name="title" nillable="true"
type="xsd:string"/>
<element name="username" nillable="true"
type="xsd:string"/>
</sequence>
</extension>
</complexContent>
</complexType>
The classes in actionscript seem plausable:
public class PersistentObject
* Constructor, initializes the type class
public function PersistentObject() {}
public var id:String;
public var insertTimeStamp:Date;
public var insertUsername:String;
public var updateTimeStamp:Date;
public var updateUsername:String;
and
public class Contact extends PersistentObject
* Constructor, initializes the type class
public function Contact() {}
public var birthday:Date;
public var firstName:String;
public var lastName:String;
public var middleName:String;
public var newPassword:String;
public var password:String;
public var title:String;
public var username:String;
When I want to retreive an object of type Contact, it seems
that only a couple of entries are filled. While debugging the flex
XMLDecoder, I noticed something strange. It seems, like the decoder
is expecting the result xml data to be in alphabetical order:
birthday, firstname, lastname, etc. But since the object is
inherited, the data that is actually received contains elements
from the parent class: birthday, firstname, id, inserttimestamp,
The resulting object has just birthday and firstname filled,
which is somehow wrong. This seems to be a problem inside the
parser itself. What can I do?

I am having a problem with an extended class as well.
When I step through the code, everything is going fine and the decoder (mx.rpc.xml::XMLDecoder) sees that the class is an extension and wants to get the values for the superclass first. When it gets into getApplicableValues(), it's looking for the values to be in the order of the definition which would be ok if the values collection didn't include the values from the subclass as well! It goes through the whole definition and doesn't find anything for the superclass because the values aren't where it expects them. When it pops back up to the subclass and starts to decode those values, it finds them because the definition order and values order match.
Is this a known issue? Or, am I misunderstanding something?
Thanks,
Chuck

Problem with shared objects synchoronization.

I encountered a small problem with shared objects.
I'm working on a program that creates chat rooms of a fixed
size of 30 users. When the 31th user comes, a new room is created.
The idea is that the client first connects to the first room
and checks if it's full by connecting to shared objects. If it is
full, connection is closed and process is reapeated on a new
instance of the application.
I use a function to connect to an instance, which takes as a
parameter a number (1 for instance room_1, 2 for room_2, etc). The
function itself creates the necessary Netconnection and
sharedObject objects.
If a room is full, Netconnections and sharedObjects are
closed and function is called again with another number.
I have no problem for connecting to the first room, but after
closing the first connection and connecting to the new room, there
seem to be some problems with the shared objects (especially,
OnSync doesn't seem to execute again after the connection to the
shared objects of the new instance).
I was wondering if you had any ideas what could cause this.
Is it the use of the same variable names for connecting at two
different shared objects?
Here is the function :
function initStreams(room) {
client_nc = new NetConnection();
client_nc.connect("rtmp://192.168.0.4/Elearning/room_"+room);
in_ns = new NetStream(client_nc);
in_ns2 = new NetStream(client_nc);
Replay_video.attachVideo(in_ns);
out_ns = new NetStream(client_nc);
out_ns2 = new NetStream(client_nc);
in_ns.play("my_recorded_stream");
users_name = SharedObject.getRemote("users_name",
_root.client_nc.uri, false);
users_name.connect(_root.client_nc);
users_language = SharedObject.getRemote("users_language",
_root.client_nc.uri, false);
users_language.connect(_root.client_nc);
users_picture = SharedObject.getRemote("users_picture",
_root.client_nc.uri, false);
users_picture.connect(_root.client_nc);
users_finger = SharedObject.getRemote("users_finger",
_root.client_nc.uri, false);
users_finger.connect(_root.client_nc);
I you need more info, I can post more of the code on the
forum.
Any help would be really appreciated

I don't see any onStatus events in the code you posted above.
If you're defining the onstatus event outside the function, that's
the problem. When you define the shared object, you also need to
define it's onStatus event handler.
Also, you really should wait for the onStatus event of the
netConnection before you connect your sharedObjects. If you try to
connect the SO before the netConnection is established, the SO will
never connect.

Problem with activeX objects

hi all,
i am having a problem with activeX objects.
my activeX ( Tree View) is wrking fine with windows2000
but when i am trying the same code with XP its saying dll missing.
do these activeX depends on OS also..
plz help me.

hey Vishwas!
did you register the .dll?
do you work with vb.net?
which ServicePack do you have in Windows XP?
greetz
Matthias

What is the problem with converting objects with gradients to gradient mesh?

What is the problem with converting objects with gradients to gradient mesh?

slange,
There may arise some smaller corruption states that may be cured by what you did, as you can see in the list. Sometimes, restarting thrice is needed.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save curent artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

I have too many problems with UserKeyMD Object

Hi everybody!!!......
I've too many problems with UserKeyMD object, this don't work, I have a Application which create the DataBase structure, but when try it for create the user key on "x" field in "ABC" table (x field is present on table, is db_Alpha with 8 chars, subtype is st_None) is raised the problem.
I try to create this way the key (VB example):
Dim oUserKeysMD As SAPbobsCOM.UserKeysMD
Set oUserKeysMD = oCompany.GetBusinessObject(oUserKeys)
oUserKeysMD.TableName = sTableName
oUserKeysMD.KeyName = sKeyName
oUserKeysMD.Unique = BoYesNoEnum.tYES
oUserKeysMD.Elements.ColumnAlias = sFieldName
oUserKeysMD.Add '<- here problem is raised
System.Runtime.InteropServices.Marshal.ReleaseComObject(oUserKeysMD)
I'm work in Delphi .Net and translate the source code of my function to VB.
P.D.:this source code at least work 2 times, but does not use it until today, I do not know because no longer it works now but.
excuse my ingles is very bad
thanks
regards
Francisco Troncoso
Chile.
Message was edited by: Francisco Troncoso

Hi, I using this names for my tables, fields and keys.
the table name is:
AOTI
the fields names are:
codigo alpha editsize 8
decrip alpha editsize 40
tipo alpha editsize 1 - valid values W, C - Default Value C
grupo1 alpha editsize 1 - valid values Y, N - Default Value N
grupo2 alpha editsize 1 - valid values Y, N - Default Value N
grupo3 alpha editsize 1 - valid values Y, N - Default Value N
grupo4 alpha editsize 1 - valid values Y, N - Default Value N
grupo5 alpha editsize 1 - valid values Y, N - Default Value N
grupo6 alpha editsize 1 - valid values Y, N - Default Value N
grupo7 alpha editsize 1 - valid values Y, N - Default Value N
grupo8 alpha editsize 1 - valid values Y, N - Default Value N
all fields have subtype none and the key name is :
AOPK1
ColumnAlias is codigo, when I try to create the table, fields and key with MetaDataOperatios example I have not problems but I try to create with my application I have the error.
Regards,
Franciso.

Problems with Modbus OMNI driver

Lookout version 5.1 (build 8)
I am using the Modbus OMNI driver to communicate with 6 OMNI 6000 flow computers at 56K (Hardwired) with a poll rate of every 20 seconds, receive gap 270 bytes and a failure of 1000mS.
The problem I have is that when scanning the OMNI, not only are they slow to respond hence the long delays between scans, but I am also finding that the OMNI data for handling digital outputs is being corrupted causing?? them to fire faster than the period I have set in the OMNI. i.e. if I set a pulse output to occur when 1m3 of fluid has past I should get one pulse from the digital output. What is happening is that the outputs slowly start firing much quicker than this until we lose control of the signal and have to reconfigure the flow computer.
Is there a possibility that Lookout is corrupting some of the memory areas within the OMNI and causing this.
I see from other users that they are having problem with slow responses from this driver.
Any advice you have on this matter would be useful
Derek

Lookout version 5.1 (build 8)
I am using the Modbus OMNI driver to communicate with 6 OMNI 6000 flow computers at 56K (Hardwired) with a poll rate of every 20 seconds, receive gap 270 bytes and a failure of 1000mS.
The problem I have is that when scanning the OMNI, not only are they slow to respond hence the long delays between scans, but I am also finding that the OMNI data for handling digital outputs is being corrupted causing?? them to fire faster than the period I have set in the OMNI. i.e. if I set a pulse output to occur when 1m3 of fluid has past I should get one pulse from the digital output. What is happening is that the outputs slowly start firing much quicker than this until we lose control of the signal and have to reconfigure the flow computer.
Is there a possibility that Lookout is corrupting some of the memory areas within the OMNI and causing this.
I see from other users that they are having problem with slow responses from this driver.
Any advice you have on this matter would be useful
Derek

Communication Problem with the second battery

Hello,
In Lenovo Solution Center it says that there is communiction problem with the second battery. I already had this problem some months ago, back then it didn't charge the second battery. I got a new one and it worked again. Now it says the same thing "communication problem", but i can charge the battery and I also can't find any other sign of something not working. But still- it seems weird that the program tells me something is wrong. Can somebody help me?
Thanks Lina

Hi, Lina
What is the machine type and model of your computer? Also, what operating system are you running?
Thanks in advance,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

COMMUNICATION PROBLEM WITH SCANNER TO COMPUTER OF DESKJET 3050 j610

WHEN i TRY TO SCAN USING MY DESKJET 3050 j610 A MESSAGE SHOWS 'COMMUNICATION PROBLEM NOT CONNECTED THEREFORE i AM NOT ABLE TO SCAN.
i HAVE BEEN TRYING TO RESOLVE THIS PROBLEM OVER 8 HOURS AND I' M GETTING SICK. I'VE TRIED EVERYTHING AVAILABLE ON THE SUPPORT PROGRAMS INCLUDING 'PAINT' AND NOTHING WORKS.
I NEED A ANSWER OR I;LL THROW THIS THING OUT

I have the same problem here, i have two PC's both running Windows 7 but only one works printing and scanning wirelessly.
On the PC running Windows 7 32bit wireless printing and scanning works great.
On the PC running windows 7 64bit only wireless printing works. Havent found a solution, but just a work around. Here it is......
1. Got to you printer and hit the Wireless button to find the IP address your router gave it.
2. Open up your Internet browser and input the IP address.
and...BAM!!! if it worked it should take you to the Deskjet 3050 All-in-One J610a Embedded Web Server page and from there you can scan with what looks like all the original options if the thing was working to begin with and save to your PC.

Communication problem with FP-2000 and Labview 7.1

I am using the FP-2000, DO-403 and TC-120 modules with Labview 7.1, being run on a host computer via an ethernet connection. The setup has operated flawlessly for ~2 years; recently, I have noticed that while a VI is running on my PC, connection to the FP module ceases. There is no pop-up "connection error" in my VI, and the all the power and status LEDs on the FP modules are normal. I can still interact with the VI on the front panel while it is running, but nothing is passed to the FP module. I have tried communicating with MAX when this occurs and receive a "no connection" message. Is there a simple solution here, such as rebooting the FP module? Or is it time to invest in new hardware?
Justin

I am having a very similar problem with my cFP-1804 and Labview 7.0. I have no problem initiating communication over ethernet, and the vi will run perfectly for hours or even days. Inevitably, however, at some point there is no longer communication with the cFP-1804. Data is no longer being passed either to or from the cFP-1804, and MAX will show that the device is not connected. I also will not see any pop-up error message that says the connection has been lost, either from Windows or from Labview. The vi will just continue to run as if nothing has happened. Turning the power to the cFP-1804 off and then on will always resolve this problem. Since I am using the cFP-1804 primarily for data logging, however, this behavior is particularly problematic as the system will record nothing but zeroes until I discover that the communication has been severed and perform the manual power cycling.
I have been unable thus far to determine the cause of this problem. Any help would be greatly appreciated.
Thanks,
Derrick

Problem With Business Object and printing job

Hello,
We are encountering a problem with the application "Business Objects FINANCE", and we would need your help quickly.
In the application , itu2019s impossible to print Consolidated Subsidiaries nor the Securities Held. If we try so, the application freezes and we can't do anything but killing the application via the task manager.
Though, other states can be printed without problem.
We tried on several different PCs, and the problem occured equally on each one.
The version installed is 10.5, and we can do any tests that you think would be useful to diagnose problem.
Our society is AUBAY SA, and our credential to enter in your support website are : S0005386617
In attachment youu2019ll find a screenshot of the event viewer from the server where the application is install.
Thanks in advance for your answer,
best regards.

check the export parameters of the event triggering workflow.
If there is a problem, try instantiating the object in your wf based on the key.
Also check if the wf is able to import the data.
regards,
Sandeep Josyula

Communication problem with Modbus object in Lookout 3.8

Similar Messages

Maybe you are looking for