Communication problem with Zebra printer

Post Author: rafu
CA Forum: .NET
Hi,I'm trying to write bidirectional communication with Zebra printer - e.g. send data to print and receive data read from tags. To send data it's possible to use WritePrinter methods described in internet, however I don't know how to get it?? In producer's manuals there is only example to printer connected by LPT1, my uses usb.Does anyone have any ideas??? Help please!rafu

I would look at XP's port configuration for the printer and then try and use the same protocol on the Mac. If XP is showing it as RAW Port 9100, then that is shown as HP jet Direct - Socket on the Mac. The only issue then is whether the OS X driver is available in the Lexmark list. Sometimes the provided OS X driver is only for direct USB connections, so you have to look at using an alternate driver, such as those offered by Gutenprint.

Similar Messages

Communication problem with network printer

I have a Lexmark X9350 all-in-one printer. It has a built in wireless card and I am trying to print to it from my Powerbook G4. I have an airport extreme network setup in my home, and my PC is able to access the printer just fine. When I installed the printer software on the mac, it recognized the printer on the network and worked at first, but then suddenly couldn't find the printer. When I uninstalled and reinstalled the software it was very strange because when I got to the point where it searches the network for a printer, sometimes the printer shows up, and then if I click to refresh the printer sometimes disappears. It is not an issue with being out of range, because the printer display tells me it has plenty of connection, and as I said the PC can print with no problems. It appears to be something specific with Tiger not being able to consistently detect the printer.

I would look at XP's port configuration for the printer and then try and use the same protocol on the Mac. If XP is showing it as RAW Port 9100, then that is shown as HP jet Direct - Socket on the Mac. The only issue then is whether the OS X driver is available in the Lexmark list. Sometimes the provided OS X driver is only for direct USB connections, so you have to look at using an alternate driver, such as those offered by Gutenprint.

Communication problem with printer when using Parallels

OK, apologies if this has been asked elsewhere but I've been trawling the forum for an hour and have yet to find the exact problem that I'm having!
First of all, I'm a recent convert to Mac (hurrah I hear you all cry), secondly, I've set up Parallels to deal with some PC left-overs, thirdly, I've tried to use my old Dell printer and realised Dell doesn't support Macs (or not my AIO 922 anyway).
So, I thought I'd get round this by installing the drivers for the printer on the Windows partition, which all went well until I actually tried to print something... although the printer is visible and 'on-line', I get the box informing me there's a communation problem with the printer and computer.
It's beginning to wind me up so any info/advice would be greatly appreciated

This is either a Windows or a Parallels problem. For Parallels go to http://forum.parallels.com. For Windows go to the support forums at Microsoft.
There is no support for either product at these Discussions.

Communication problem with Adobe 9.0 and HP Printer when I scan

I'm having a problem getting a .pdf file to come up when I scan from a HP 5610 All-in-one printer. Have uninstalled and reinstalled HP software three times but when I scan and want a pdf file it won't communicate with Adobe 9.0 reader for some reason. Is there a setting in Adobe reader that's a problem?
Thanks.

Thanks...found out that an HP5610xi All-in-One will not completely communicate with Adobe 9.0 Had to go to Adobe 6.0
Date: Thu, 17 Dec 2009 03:19:49 -0700
From: [email protected]
To: [email protected]
Subject: Communication problem with Adobe 9.0 and HP Printer when I scan
May be that the HP software doesn't support Adobe Reader 9.
>

Printing trhough SAPWIN with ZEBRA printer

Hi Gurus
I need your help please since I already spent a lot of time to find a solution and not found any.
I use Smartform to produce labels on ZEBRA printer (output Device Z201, Device Type ZLZEB2:Zebra label printer 203dpi). All fields on my form use HELVE as font. I print my form through Z201 and it works fine.
My requirement now is to print the form to ZEBRA printer locally using SAPWIN (Rel 4.x/SAPlpd 4.09 + ONL:Y) as device type. To do this I created a new output device LCLB, copied the device type SAPWIN into ZWIN and attached to output device LCLB
The problem is when I print the form using LCLB, all my fields with HELV font are printed with COURRIER font.
I went in transaction SE73 and display printer fonts associated with ZWIN and it seems that all fonts (COURCYR, COURIER, OUR_I7, HELVCYR, HELVE, HELV_I7, OCRA, OCRB, TIMECYR, TIMES, TIME_I7) are defined there. Do I miss something? Do I have to redefine the print control in ZWIN with control characters corresponding with ZEBRA printer?
Any feedback would be appreciated
Thank you

Hi Valter,
did you figured it out why do you had a problem with that printer?
tks
best regards,
Pedro

Communication error with Epson printer SX510W

I am getting a communication error when I try to print on my Epson SX510W wrieless printer. How do I correct this? My operating system is OS X Version 10.9.4.
I've tried re-installing the software from the CD-Rom but it won't let me use the Quick Start, It lets me download the print driver and scan driver from the list of software on the disc but that hasn't made any difference. I think it's a problem with the printer and the IP address, how do I correct this. How do I find the correct IP address on the printer?
Sometimes if I turn the printer off and on again, it allows me to print just one page and then stops again.
John Mitchell

Thanks John. I tried deleting the Epson printer folder from the library like you said and then checked for Software Updates. But Apple did not indicate that there were any for my OS (probably because I had installed the latest OS update this morning). So I installed the driver from the Epson site with the printer folder removed. But this did not work because when I tried to print the computer indicated that there were missing files. So, I reinstalled the Epson folder that I had just moved to trash, deleted the new Epson folder, then tried reinstalling the Epson driver with the original folder in place. THIS WORKED! Finally, I am off and printing but with little knowledge gained about the inner workings of my computer.

Problem with HP Printer Utility and Mac OSX 10.5.4

I have a problem with HP printer Utility. When a standard user adds a new paper profile HP Printer Utility asks to type an administrator's name and password to allow HP printer Utility to make changes. Is it possible to avoid this? Otherwise I have to give admin rights to every user because they have to be able to add new papers. HP printer Utility sharing and permisssions are set to read and write to everyone.
HP designjet Z3200
MacOSX 10.5.4 (Mac pro intel)
HP printer utility 3.6.0.

Just found an email HP Support sent to me back in January 2008, about this issue
"Hello Hunter,
Thank you for contacting HP Total Care.
There currently is not proper driver for 10.5, so it is surprising that the printer is printing correctly on your Mac from any application.
Your issue cannot be resolved until the 10.5 driver is developed and released.
To sign up for an update as soon as it is available ...click on the link below:
HP's subscriber's choice is a free service where you can select to receive timely email notifications ranging from software and driver updates to creative ways to do more with your HP products.
http://h71036.www7.hp.com/hho/html/3618-0-0-225-121.html
If you need further assistance, please reply to this message and we will be happy to assist you further.
You may receive an e-mail survey regarding your e-mail support experience. We would appreciate your feedback.
For information on keeping your HP and Compaq products up and running, please visit our Web site
at:
http://www.hp.com/go/totalcare
Sincerely,
Dave
HP Total Care"
I just sent them an email today on any updates regarding a release date on the Leopard driver for P1005, i'll post any info i receive.

Communication problem with proxy server

We have establish the configuration of an iPad to access the enterprise net, but when trying to access any webpage we get the next message: Safari can not open the page. Error:"There is a communication problem with proxy web server (HTTP)"
The access has no problems with other movile devices.
Ahy help?

Hi,
I am not sure whether you have already solved the problem or not....
Do the following to deploy MobileBIService.war file on tomcat
1.Stop Tomcat Web application server.
2.Copy the file, MobileBIService.war from [Install directory]\Mobile 14\Client to the Tomcat's "Webapps" directory.
In my case, I copied the MobileBIService.war from C:\Program Files (x86)\SAP BusinessObjects\Mobile14\Client to C:\Program Files (x86)\SAP BusinessObjects\Tomcat6\webapps. ( I used BO 4.0 SP02)
3. Start Tomcat.
Restarting Tomcat would automatically deploy war file as a Web App
One folder u201CMobileBiServiceu201D will appear in webapps folder when MobileBIService.war is deployed successfully.
Hope it helps.
Regards,
Ankur

T.code FBL5N: a problem with the print of the output list

Hi All,
with reference to the t.code FBL5N, I have a problem with the print of the output list of the report.
When I execute the print, I obtain one customer for each page printed.
I wonder if is possible to obtain more customers for each page printed.
Could anyone help me?
Thanks
Gandalf
Edited by: Umberto Gandalf on Dec 21, 2008 10:36 PM

Hi,
Though personally i havent tried this option, check the same
Go to Menu: Settings >> Switch List
This will make the value displayed in ALV format and then try taking print outs.
Regards,
Sridevi

Problems with my printer HP Officejet pro 8600 Plus + Yosemite

Hi got problems with my printer HP Officejet pro 8600 Plus till I installed Yosemite it is not recognized so what can I do now.. No new drivers found by HP

Thanks for this AnnRT!
I've spent the best part of a day trying to figure this out. Everything was fine and then one day nothing worked! I have narrowed the issue down to Bonjour via WiFi as everything worked fine via USB, and via IP over WiFi.
I've now set a static IP for the printer and things seem to be working fine again
Thanks!
Chris

Problem with pdf-printing in Adobe Acrobat Pro

Hi,
I have Adobe Acrobat Pro 9.4.3.
PDF-printing has always worked great but suddenly there is some kind of problem.
After printing a excel-document from "Print to pdf" built-in function in MacOS OR Adobes Printer I have corruptet pdf-files when showing them in Adobe Reader/Acrobat, but the MacOS Preview-software shows them correct.
So, there cannot be any problem with the printing, but the local preview on my computer using Reader or Acrobat. I dont even use the Myriad font in the document, I use Verdana.

You say you're using Verdana but you're not. The error message clearly shows you're using MyriadPro Bold.
You probably recently installed the Mac OS X 10.6.7 update which has a bug with OpenType PostScript fonts like MyriadPro Bold. Either use Verdana or another TrueType or PostScript font, or revert to Mac OS X 10.6.6.
Read about the problem here: http://www.tidbits.com/article/12078

HP Officejet Pro 8600+ "There is a problem with the printer or ink system..."

I have an HP Officejet Pro 8600+ that is coming up with an error message. This just happened out of the blue yesterday. The printer is just over a year old.
It says:
"There is a problem with the printer or ink system. Print head missing not detected incorectly installed or incompatable"
I have removed and reinstalled ink cartridges, the head, unplugged, cleaned, etc. etc.
HP Officejet Pro 8600+
Product Number CM750A
Serial Number {Content Removed}
Not under warranty
Please advise.
This question was solved.
View Solution.

Sorry that you are experiencing this problem. Here is a link that may assist you with the ink system.
http://goo.gl/BXDFf
It seems to be a bad print head, or it needs manually cleaned with lint free cloth and water. If these steps do not resolve the issue, contact HP Support (1800-474-6836).
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

Problem with the printer or ink system code 0x610000f6 HP model 6700 premium

Hello, I have recieved an alert for the second time in a week stating that there is a problem with the printer or ink system. The alert prompts me to turn off, then on the printer. If problem persists, contact HP. 0x610000f6. What could be the cause for this type of alert to appear?

'0x610000f6' error message appears if there is a 'Paper Jam' or a 'Carriage Jam' in the printer.
You can experience following issues:
The product won't print.
The print job stops unexpectedly.
To resolve Error code '0x610000f6' follow methods provided in below mentioned link
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c01620497

Problems with HP printer and PSE 11 (was bill v)

When using my HP 7020e photosmart printer and Adobe photoshop elements 11, I get a very small white border on the prints. I have set for borderless printing. Adobe says the print size is 4.2 x 6.18 instead of 4 x 6. Any suggestions?

I had already set it to borderless but it still prints a very small white
border. HP had no solution. I am ready to send the printer back to them.
In a message dated 1/14/2014 5:47:22 A.M. Eastern Standard Time,
[email protected] writes:
Re: Problems with HP printer and PSE 11 (was bill v)
created by hyadav (http://forums.adobe.com/people/hyadav) in Photoshop
Elements - View the full discussion
(http://forums.adobe.com/message/6010537#6010537)

Problem with my printer "sorry not recognised"

Dispite posting the problem i had after MUCH hard work and searching for how to do this, i never got a reply (i thought this was a support forum), i hate to say it but support from HP has seriously gone down hill, i have a problem with my printer which is in warrenty can i send and email NOOOOOOO cos i have to put S/N and product number i put them in but i get "sorry not recognised" How the hell are you meant to get any support when they make 99% impossible to to post and email them i am sorry HP but your support is a shambles, your heads should be hung in shame.

Same problem and the same printer, Yosemite not recognize the printer (which I think is incredible, Windows was better in these areas to get a new OS).
Some advice from those who have been mentioned here and do not solve the problem?
If I had known I stay with Snow Leopard, worked best on Imac mid-2010.
Very unhappy with Apple, had understood that they were more serious and respectful to customers.

Communication problem with Zebra printer

Similar Messages

Maybe you are looking for