Communication structures with same technical name

Hi,
In our BW 3.5 system, we found two communication structures with the same name. Can anyone advice me how could this be possible? Did anyone encounter this kind of scenario before.
Your suggestions will be helpful for my analysis.
Thanks!

Please check the entries in table RSKS for your communication str. Is there any entry with version T?
We had faced this issue for Transfer Str & not for communication str. The reason was we had a copy system & when you do changes to the copied object in dev & try to transport it to the copied system, it fails. The reason being it stores the object in version T in copied system.

Similar Messages

Multiple Infoobject with same technical name

Hi All,
I have a very basic question which confuses me a lot.
I have installed a BI content info cube 0SD_C03(Sales overview) and it is installed in Info Area - ERP Analytics -->sales and distribution analyses. I checked the dimensions of it and 0customer( master data attr) is linked as a dimension. I created a copy of 0SD_C03 and the new Infocube name is ZSD_C03_T. It also has the same 0customer master data attr as a dimension(obviously!).
Now both the infocubes have different technical name(0SD_C03 and ZSD_C03_T) since they will be storing different sets of data(lets say). but the technical name of the master data (0CUSTOMER) is the same for both cubes.
ques 1: Is it since its a master data and contains the same set of master data for both the cubes, it has the same technical name?
If I search the Info provider section for "0CUSTOMER", i get two entries: One within my info area and another within another info area. And also i can keep doing (Right click Info area--> Insert Characteristic as Infoprovider) on every other info area and insert 0CUSTOMER in every other info area.
ques 2: does all the 0CUSTOMER in different info areas, actually contain the same set of data?
ques 3: if i search for 0CUSTOMER in InfoObjects section, i get 5 entries in different infoareas. How can there be diffferent Infoobject with same technical name be present in different info areas?
Sorry if i am too elaborate, I hope i have made my questions clear.

Hi,
ques 1: Is it since its a master data and contains the same set of master data for both the cubes, it has the same technical name?
A. same 0CUSTMER you can use the different places it holds same data.
source is the 0CUST_ATTR -> target is 0CUSTOMER.
ques 2: does all the 0CUSTOMER in different info areas, actually contain the same set of data?
A. it will contain the same set of data.
it has the overwrite function.
ques 3: if i search for 0CUSTOMER in InfoObjects section, i get 5 entries in different infoareas. How can there be diffferent Infoobject with same technical name be present in different info areas?
A. you triggered the 5 times for specif DTP means you will 5 entries for different info areas.
finally i will say you use the 0CUSTOMER no of places where you required and no need to create the ZCUSTOMER.
Thanks,
Phani.

Two query with same technical name in Quality

Hi experts,
I have two queries in Quality with same technical name. I used the program RENAME_DUPLICATE_ELEMENTS to rename the query and its renaming the latest query instead of the old Query. I am in BI 7.0 system and cant find a note that applies to BI 7.0. There are quite a few notes on 3.x system. Has somebody faced the same problem. What did you do. If there is a note for bi 7.0, please let me know so i can resolve with the Basis team.

We had similar issues - this happens when you create a query locally and then transport the same.
The queries have an internal GUID which is generated locally and this causes duplicates.
You can :
1. Delete queries using the GUIDS ( you can find this in RZCOMPDIR or RSRREPDIR tables ) using RZDELETE to delete queries.
identify your older version query and then delete the same and you should be good to go...
also try identifying the same using program
ANALYZE_RSZ_TABLES

2 queries with same technical name

Hi,
I have just opened this <b>QA</b> system. I find that there are two queries with the same technical name. The query definition is also the same. But it shows twice when I search for them.
I thought the system only allows a single technical name to be created once.
Please help me understand how this may have happned? And also how I can delete one of them without effecting the web templates and workbooks where this query is used.
Thanks
NEWBW

You can use the ABAP Program RENAME_DUPLICATE_ELEMENTS to rename the duplicate queries.
The system tracks query objects using the 25 char UID and not the technical name of the query. In some cases you will end up with 2 queries with the same technical name usually with transports from multiple systems.
You can also use the report ANALYZE_RSZ_TABLES to proactiveley analyze these kinds of issues in the system.
Thanks

BW Variables with same Technical Name

I have just come across some variables in our BW system (3.0B) that have the same technical name. I dodn't think this was possible. Could someone please explain this.
Thanks

Hi Ian !
This is possible.
Take a look to the OSS Note 541024 'Duplicate query names in the BW system'.
Hope it helps.
Bye,
Roberto

How to get two fields with same tech name in LIS Extractors?

Hi Experts,
I need "ERDAT" field from two structures (QMSM & QMFE) in 2LIS_18_IOTASK extractor.
In LBWE first I moved ERDAT from QMSM. When I moved ERDAT from QMFE it gives an error:
"Field with same technical name is already available in the Extract Structure".
I don't want to create Append Structure as we need to write User exit.
Can any one tell me how to get this field added in the extractor from QMSM and QMFE?
Thanks for your help.
Regards,
Sree

this is not possible as the all those fields are put in one structure. per definition you can't put the same field name twice in a structure, table in the data dictionary...
hence, you really need to use an append and fill via user exit
M.

How to delete queries with identical technical name in BEx

Hi everyone,
How do I delete query which is assigned to Roles in BEx.The problem is that there are two queries with the same technical name. And both queries are assigned to the same Role.Can anyone help me out in deleting both those queries.
Thanks in advance.
Regards,
Jayasree.

Hi,
When you do Changes in Dev and do the Transporting to Production, the Same Query which is already exist in Production is not overwritten. For that reason Queries will show as two. Check the note: 541024.
Check with your Basis team also.
You have to identify the UID Component of that Particular Query, which want to delete in production. Check the Queries as Date wise, you will find.
Delete these by using RSZDELETE tcode with UID Component of that particular Query in Production.
Let us know if you still have any issues.
Reg
Pra

How To Create Table View With Same Column name But Different Table?

Hi All,
I have the problem to create a tableview with same column name but in different table.
The Table that i have:-
Table - PAC051MPROFORMA
Column - mrn,visitid
Table - PAC051TPROFORMA
Column - mrn,visitid
Table - PAC052MTRANSBILL
Column - mrn,visitid
Then i want to create a table view to view that table. This is my SQL
CREATE VIEW pacviewproforma (mrn,visitid,mrn,visitid,mrn,visitid)
As Select PAC051MPROFORMA.mrn,PAC051MPROFORMA.visitid,PAC051TPROFORMA.mrn,PAC051TPROFORMA.visitid,PAC052MTRANSBILL.mrn,PAC052MTRANSBILL.visitid
where
*(a.PAC051MPROFORMA.mrn=PAC051TPROFORMA.mrn)*
and
*(a.PAC051TPROFORMA.mrn=PAC052TRANSBILL.mrn)*
That SQL Return this error = ORA-00957: duplicate column name
Then I modify that SQL to
CREATE VIEW pacviewproforma (mrn,visitid)
As Select PAC051MPROFORMA.mrn,PAC051MPROFORMA.visitid,PAC051TPROFORMA.mrn,PAC051TPROFORMA.visitid,PAC052MTRANSBILL.mrn,PAC052MTRANSBILL.visitid
where
*(a.PAC051MPROFORMA.mrn=PAC051TPROFORMA.mrn)*
and
*(a.PAC051TPROFORMA.mrn=PAC052TRANSBILL.mrn)*
This time this error return = ORA-01730: invalid number of column names specified
What should i do?
Thanks...

Hi,
SQL> CREATE VIEW pacviewproforma (mrn,visitid,mrn,visitid,mrn,visitid)
2 As Select
3 PAC051MPROFORMA.mrn,
4 PAC051MPROFORMA.visitid,
5 PAC051TPROFORMA.mrn,
6 PAC051TPROFORMA.visitid,
7 PAC052MTRANSBILL.mrn,
8 PAC052MTRANSBILL.visitid
9 from PAC051MPROFORMA,PAC051TPROFORMA,PAC052MTRANSBILL
10 where
11 (PAC051MPROFORMA.mrn=PAC051TPROFORMA.mrn)
12 and
13 (PAC051TPROFORMA.mrn=PAC052MTRANSBILL.mrn);
CREATE VIEW pacviewproforma (mrn,visitid,mrn,visitid,mrn,visitid)
ERROR at line 1:
ORA-00957: duplicate column namePlease give different names to each column.
Something like this..
SQL> CREATE OR REPLACE VIEW pacviewproforma (MPROFORMA_mrn,MPROFORMA_visitid,TPROFORMA_mrn,TPROFORMA
_visitid,MTRANSBILL_mrn,MTRANSBILL_visitid)
2 As Select
3 PAC051MPROFORMA.mrn,
4 PAC051MPROFORMA.visitid,
5 PAC051TPROFORMA.mrn,
6 PAC051TPROFORMA.visitid,
7 PAC052MTRANSBILL.mrn,
8 PAC052MTRANSBILL.visitid
9 from PAC051MPROFORMA,PAC051TPROFORMA,PAC052MTRANSBILL
10 where
11 (PAC051MPROFORMA.mrn=PAC051TPROFORMA.mrn)
12 and
13 (PAC051TPROFORMA.mrn=PAC052MTRANSBILL.mrn);
View created.
SQL> DESC pacviewproforma;
Name                                      Null?    Type
MPROFORMA_MRN                                      NUMBER
MPROFORMA_VISITID                                  NUMBER
TPROFORMA_MRN                                      NUMBER
TPROFORMA_VISITID                                  NUMBER
MTRANSBILL_MRN                                     NUMBER
MTRANSBILL_VISITID                                 NUMBER
ORA-01730: invalid number of column names specifiedThe list of column nmae you specified during the CREATE VIEW should match with the SELECT list of the view.
Twinkle

APD - error when activating, problem: 7.0 variable with long technical name

Hello everybody!
I have got the following problem:
I created an APD, with one filter on 0calday using a variable. This variable was created on our own and works without any problems. It's a 7.0 variable with a long description "W_E_M_0CALDAY_WDLAS"
If I try to activate the APD I get an error message "Analysis Process Has Errors, Activation Is Not Possible" and "Variable W_E_M_0CALDAY_WDLAS does not exist actively". But this variable is active!
My colleague told me, that there seems to be a problem with long technical names of variables in APD. I tried to find a SAP note to this topic, but I didn't.
Had anyone else this problem? How was it solved? Or are there any SAP notes I didn't find?
Thanks for your help!
Bettina

In the meantime I copied the variable to a shorter name, but it still doesn't work. I tried it with a 3.x variable and a 7.0 variable. In the exit I first added an OR condition to the when-case, but this didn't also help. Afterwards I copied the whole coding in a separate when-clause.
Stil not successful. Factory calender is OK. The variables also work in a normal query but not in the APD - the result of the last workday is always '00000000'.
Any ideas?
Kind regards,
Bettina

How can OIM provision users with same Display Name in AD?

I can create users with same First Name, Middle Name and Last Name (same Display Name) in OIM if they have different UserId.
But I can not provision two users with same Display Name to one Organization Unit in AD, the resource provisioning shows
Status: Rejected
Response: AD user already exists
Can AD be configured to create users with same Display Name (different UserId) in one OU, or would I have to create logic in OIM to modify the display name so it gets accepted by AD?
Thanks!

Thanks Nitesh. Also, I can create the user with same DN in different OU's, not in same OU.
I agree once we determine that same cn exists in one OU , I can modify the display name by appending a number at the end or something. I understand the logic but I need more details on how to specify this logic in the pre-pop adapter, can you please share more details.
Thanks a lot!

Recreate skype user with same skype name ?

I just deleted 21 skype users, by mistake, in Business Manager, is it possible to recreate them with same skype name ?
/Claus

Hi again,
Hope this helps.
alias_maps = hash:/etc/postfix/aliases,hash:/var/mailman/data/aliases
always_bcc =
command_directory = /usr/sbin
config_directory = /etc/postfix
content_filter = smtp-mailtransport:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
debugpeerlevel = 2
enableserveroptions = yes
inet_interfaces = all
luser_relay =
mail_owner = postfix
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
mapsrbldomains =
messagesizelimit = 10240000
mydestination = $myhostname,localhost.$mydomain,localhost,apm.pt,onlearn.apm.pt,ml.apm.pt,xserv e.apm.pt
mydomain = apm.pt
mydomain_fallback = localhost
myhostname = mail.apm.pt
mynetworks = 127.0.0.1/32,195.23.139.104/29
mynetworks_style = host
newaliases_path = /usr/bin/newaliases
ownerrequestspecial = no
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
recipient_delimiter = +
relayhost =
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = postdrop
smtpdclientrestrictions = hash:/etc/postfix/smtpdreject
smtpddelayreject = yes
smtpdenforcetls = no
smtpdhelorequired = yes
smtpdhelorestrictions = permitsasl_authenticated,permitmynetworks, checkheloaccess hash:/etc/postfix/heloaccess,reject_non_fqdn_hostname,reject_invalidhostname,permit
smtpdpw_server_securityoptions = login
smtpdrecipientrestrictions = permitsasl_authenticated,permit_mynetworks,reject_unauthdestination,permit
smtpdsasl_authenable = yes
smtpdsenderrestrictions = permitsasl_authenticated,permit_mynetworks,reject_non_fqdn_sender,reject_unknown_sende rdomain,permit
smtpdtlsCAfile =
smtpdtls_certfile =
smtpdtls_keyfile = $smtpdtls_certfile
smtpdtlsloglevel = 0
smtpduse_pwserver = yes
smtpdusetls = no
unknownlocal_recipient_rejectcode = 550
virtualaliasmaps = hash:/var/mailman/data/virtual-mailman
João.

Multiple MovieClips with same instance name

I'm following a tower defence tutorial and part of the code is set up so I can build towers on the "grass" movie clip. I wanted to add more patches of "grass" and gave them all the same instance name so I can be able to place towers on them, but I have the problem that I can only place towers on the first item I placed and has the instance name of "grass". I can't seem to place towers on the other patches of grass.
I removed the instance name of the first patch of grass and it let me build towers on the second patch, but the second patch only.
I was following this tutorial: http://www.goofballgames.com/2010/01/31/how-to-build-a-tower-defense-f lash-game-part-2-placing-towers/
Here is the code for it I believe:
onClipEvent (load)
    active = 0;
onClipEvent (enterFrame)
    if (active == 1)
        setProperty("", _x, int((_root._xmouse - 10) / 20) * 20 + 20);
        setProperty("", _y, int((_root._ymouse - 10) / 20) * 20 + 20);
hitTestOnGrassMovieClip = _root.grass.hitTest(_x, _y, 1);
        if (hitTestOnGrassMovieClip) {
            gotoAndStop(1);
   _root.ranger.gotoAndStop(1);
        else {
            gotoAndStop(2);
   _root.ranger.gotoAndStop(2);
        _root.ranger._x = _x;
        _root.ranger._y = _y;
        _root.ranger._width = _root["tower_" + tower].range * 2;
        _root.ranger._height = _root["tower_" + tower].range * 2;
on (press)
hitTestOnGrassMovieClip = _root.grass.hitTest(_x, _y, 1);
hitTestOnDeSelectMovieClip = _root.deselect.hitTest(_x, _y, 1);
    if (hitTestOnGrassMovieClip || hitTestOnDeSelectMovieClip) {
        if (hitTestOnGrassMovieClip) {
   ++_root.towerCount;
   _root["tower_" + tower].duplicateMovieClip("t" + _root.towerCount, 500 + _root.towerCount);
   a = _root["t" + _root.towerCount];
   a._x = _x;
   a._y = _y;
   a.active = 1;
active = 0;
setProperty("", _x, 1000);
_root.selectedTower = "";
_root.ranger._x = 1000;
_root.ranger._width = 10;
_root.ranger._height = 10;
}

1. You cannot use the same instance names for different objects and expect more than one to be targeted. You need to assign unique names, or you can store references to them in an array and use the array to target them.
2. You are posting AS2 code in the AS3 forum. You should repost in the AS2 forum. http://forums.adobe.com/community/flash/flash_actionscript

Getting old site off the 'net without appropriate files. (to start over with same domain name)

As a complete novice, I'm not even sure how to start this question...but, I have tried everything and I think I have "lost" my website in terms of bringing in back into DW and changing/updating it. My backup files on my computer have disappeared and the appropriate files through my cPanel to bring it back to in order make changes aren't there. The website still functions, but it is outdated for my business needs.
So, at this point, my question is this; how can I gain control over the domain and start over from scratch. I don't want what is out there anymore, but without control through the above mentioned devices, is it even possible to build a new website and get the old one off the 'net as it is and still keep the original www.name.com?
I'm clueless at this point. Thanks.

Chazmonk wrote:
So, at this point, I don't know what is really going on. My main goal was to get my existing website off the net and put something updated on with the same domain name. I was successful with what JTANNA suggested, but I don't know what I'm doing with a mirrored site in terms of what my needs are. I am not against changing the domain name and just leaving this one out there, though I did put a great deal of time into building it. I would take some further help if anyone has more suggestions, but I'm about ready to move one.
Thanks for trying to help.
You will need to sort out the FTP issues because when you have edited your site, you will need to upload it and so FTP details will be required.
Your first port-of-call to sort this out is to contact your host who can reset the password for you so that you can start all over again. The alternative, is to give your password/login details to Murray (PRIVATELY) so that he can try from his machine. When this is done, you can always change the password for your own security.
hth

"Accounting-Start" and "Accounting-Stop" with same "user name" and "session Id" recorded in different RADIUS servers.

Hi,
I have questions about "Accounting-Start" and "Accounting-Stop".
1.If a NAS configured to have a primary and a backup RADIUS server. To start with all the “Accounting-Start” records will be in the primary RADIUS server. Later on the primary server goes down (Primary server won’t tell the NAS?). When sessions stop, the NAS sends the “Accounting-Stop” to the secondary. I understand the “Start-Stop” record with the same “user name” and “session-id” ideally should be recorded in the same server. If this situation happens what should both the NAS and RADIUS server do?
2.A NAS configured to have a primary and backup RADIUS server. To start with all the “Accounting-Start” records will be in the primary RADIUS server. Later on the administrator decided to change the primary server (as there are problems with the previous primary). sessions stop, the NAS sends the “Accounting-Stop” to the new primary. This ends up the “Accounting-Start” and “Accounting-Stop” with the same “user name” and “session Id” in two RADIUS servers.
To summarize, how to avoid the ”start-stop” pair ends up in different servers ? If it does, is it an issue for RADIUS application ?
Cheers,
1.If a NAS configured to have a primary and a backup RADIUS server. To start with all the “Accounting-Start” records will be in the primary RADIUS server. Later on the primary server goes down (Primary server won’t tell the NAS?). When sessions stop, the NAS sends the “Accounting-Stop” to the secondary. I understand the “Start-Stop” record with the same “user name” and “session-id” ideally should be recorded in the same server. If this situation happens what should both the NAS and RADIUS server do?
2.A NAS configured to have a primary and backup RADIUS server. To start with all the “Accounting-Start” records will be in the primary RADIUS server. Later on the administrator decided to change the primary server (as there are problems with the previous primary). sessions stop, the NAS sends the “Accounting-Stop” to the new primary. This ends up the “Accounting-Start” and “Accounting-Stop” with the same “user name” and “session Id” in two RADIUS servers.
To summarize, how to avoid the ”start-stop” pair ends up in different servers ? If it does, is it an issue for RADIUS application ?
Cheers,

vignesh and BalusC,
following is the code in front controller's doFilter method. is this not thread safe?
        HttpServletRequest req = (HttpServletRequest) request;
        HttpServletResponse res = (HttpServletResponse) response;
        HttpSession session = req.getSession();
        somepackage.User user;
        if(session.getAttribute("user") == null){
            user = new somepackage.User();
            session.setAttribute("user", user);
        }else{
            user = (somepackage.User) session.getAttribute("user");
        }user object maintains all information about a user. if it is in session scope, everything should work fine.
another observation is after some time of usage, both people in different systems are getting same session.getId()
in my logout page i am using
session.invalidate();
thanks,
moses

Combine Files into a Single PDF with Same File Name

I have one PDF form that I have to fill in some data and a Microsoft Word Document. Sometimes I wait a few days so I need to complete the same PDF form. When I combine them, I get warning that PDF forms with the same name will be the same - if I do not want this, I should create a PDF portfolio. The portfolio does not see like I want. It combines the PDFs into some else.
I could change the names of the fields that I need, but I am sometimes afraid that I missed something.
Is there a way to get away with this issue so the combination is good? I have to fax the documents in once created and the portfolio does not seem like I can do that.
Adobe Acobat XI Pro and Windows 8.1
Thank you!
Corey

So I think I found it - you go to File - Save As Other - Discard and then check Flatten form fields. The fields can be changed (but that is fine, I am faxing the pages).
So I guess I am trying to verify, is this the correct way?
I ask because I found Eight Free Acrobat XI Actions for Legal Pros that leads me to down a .sequ file extension.
If the first one is correct, and I have a PDF page that needs to be used twice in the combination, this will work? And that data field (say 9ROW OF SERVICE) the first page can have 01/22/2014 and the second will have 01/23/2014? I just want to make sure because before when I reviewed the Binder, if I entered 01/23/2014, then the other PDF page has the incorrect date of 01/23/2014 instead of 01/22/2014. I ask this as well because sometimes I might have to change the date or something else in a field with the same field name, and that other PDF file will update.
Thank you!
Corey

Communication structures with same technical name

Similar Messages

Maybe you are looking for