Communication user- Interactive & Non interactive login

It is said that for Communication User type logon with SAPGUI is not possible. But whether the system checks for Expired or initial passwords depends upon the logon method(Interactive or Non interactive)
What does Interactive and Non Interactive Logon mean here?

Sheetal Agarwal wrote:
> It is said that for Communication User type logon with SAPGUI is not possible. But whether the system checks for Expired or initial passwords depends upon the logon method(Interactive or Non interactive)
>
> What does Interactive and Non Interactive Logon mean here?
See SAP Note 622464:
Users of type COMMUNICATION are subject of password expiration control but not able to use SAPGUI. Well, in such a case it cannot be guaranteed that a password change dialog is performed.

Similar Messages

Re-image computer with no user interaction at all - SCCM 2012

I have searched many posts and havent found a clear solution for my question.
Basically, I have OSD task sequence ready to go on my SCCM 2012 R2. It is fine to run it as "Available".
If I deploy the OSD through Software Center as "Required" and "ASAP", then I login the client, the client will run OSD task sequence sometime after about 30Min-1 hour later, not sure. And there will be no user interaction needed. However
this means I need remotely log into each computer to let OSD happen.
If I deploy the same TASK Sequence as "Required" and "ASAP" through "PXE", it will first ask PXE Password(Which I set in DP->PXE Panel), then I need hit "Next" again to start the assigned OSD, which means I need
physically go to each computer to do this. (EDIT: If needed, I can remove PXE password and add VB scripts in other Task Sequence, however I want to know if I still need press NEXT to start the OSD).
The clients are not AMT enabled but Lan Wake up enabled and also can be set to LAN WAKE UP Enabled with boot from LAN. I can wake up/shutdown the whole collection with command if needed.
Is there a way that I can Re-image one collection of Computers without any interaction on client side?
The other question is how long to wait for OSD when it is set to "ASAP"?
RockyOZ

Guess I just answered question myself. With PXE Password removed, the OSD runs without user interaction. Thanks. I will add the password in task sequences instead.
RockyOZ

[svn:fx-trunk] 11532: ComboBox user interactions

Revision: 11532
Author:   [email protected]
Date:     2009-11-06 13:32:37 -0800 (Fri, 06 Nov 2009)
Log Message:
ComboBox user interactions
Added support for an improved user interaction. When the user starts typing in the textInput, ComboBox will now update the textInput with the rest of the matching item. It will then select the non-typed text. When using the navigation keys, the textInput will change to the new highlighted item.
QE notes: Tests need updating to account for new user interaction
Doc notes: We should update the docs to describe the user interaction
Bugs: N/A
Reviewer: Glenn
Tests run: DropDownList, ComboBox
Is noteworthy for integration: No
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/ComboBox.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/DropDownList.as

Auto-install updates, with no user interaction?

Due to problems with malware, we can't really trust everyone to be logged on with administrator privileges all the time as it used to be with Windows 2000 and XP. Consequently the installed software can not be modified by staff anymore.
This doesn't affect Windows Updates since those can be configured to install automatically on a schedule without any user interaction or privilege elevation.
Java for Windows however does not detect when a logged in user does not have administrative rights, so it offers updates to everyone who logs on, including people who can not and will not ever be able to install the updates.
One "solution" is to turn off the update checking so that people aren't hassled by useless update notifications, but then this means Windows desktops will gradually fall further and further out of date, opening them up to attack by malware that exploits unpatched bugs in older Java versions.
The proper solution that I really want, is for Java to be capable of auto-update and self-install without any user interaction or privilege elevation at all. However so far I have not found a solution for this.
A hack may be possible using Windows group policy, the Windows Server task scheduler, and a java website screenscraper.
Nightly:
* Screenscrape Java.com for a newer client version
* If new one is found, download, put in global read-access share
* Using a database of machines known to be running Java, flag each candidate that's using an older version
* Wake-on-LAN the machines needing the update
* Schedule a remote install of the update with Administrative privileges
* If update successful, clear flag for that machine in central database
* shut down again for the night.
OR
Java programmers could implement an auto-install mechanism of their own, that can run by itself without user interaction at system startup, shutdown, or on a timed schedule set by the administrator through registry entries (and therefore configurable via group policy applied to desktops).
==========
How are other network administrators handling managed business desktops that need periodic, automatic, and non-interactive Java updates?

We use Altiris Software Delivery solution to deploy our Java updates but you could also use similar solutions such as Microsoft System Center Configuration Manager.
The problem is that these are both options that cost money and require investment and training.
Altiris allows you to create a collection based on the text string held in the Add/Remove Programs list (as well as other fields) - so you can easily create a collection of computers that do not have the required version of Java.
You can then create a software delivery task to silently install Java with admin rights and target it towards the collection that needs updating.
The collection updates dynamically. As the computers get Java they drop out of the collection and are no longer targetted for upgrade. This used to work well for me - as I could update about 500 machines in about 2-3 days.
The problem is that the Java installer doesn't work consistently as you mentioned since JRE 6u25 - the installer doesn't always behave as expected and the switches to do silent installs keep changing. You also have a problem if you try to update Java and the person has their web browser open... Yes, I do my updates during working hours as well.
In a constantly changing environment in terms of security - you'd think Oracle would have sorted the deployment options out by now?

Error in Installation of Aqualogic User Interaction 6.5

Hi,
I have installed Aqualogic User Interaction 6.5, with Weblogic 9.2, Apache 2.0.63, Oracle 10g.
Portal Diagnostic is running successfully.
But while i am trying to start the weblogic server it is throwing me the following error-
Task 'InitPortalObjects' failed on startup
Task #1 <InitPortalObjects) Step#3
OpenKernal Initialization Failure(Java)
Recommendation:Review the detailed exception listed below for specific analysis. Check that pthome.xml is in the correct place,check that the PT_HOME environment variables points to it, and check that your database settings by runing ptconfig. Check that your database settings by running ptconfig. check that the portalconfig.xml file is accessible by the web application server.
My pthome is in the correct place, also the PT_HOME is pointing at the correct place.
Also the weblogic is pointing to the other machine. Is this the reason for the above error?
Thanks in Advance!

Hi Patel,
Thanks for your update.
Regards,
Hari.

How to print a pdf without user interaction (With C#)

My boss assigned me a task that to get the ImagePreview of 1st page of PDF.
My thought is to print the 1st page of PDF to file(virtual print to file), and get the image source, but there comes the problem:
How can print a pdf without user interaction(With C#),question are these:
1. I can use the ShellExcute but cannot assign the destination of output file.
2. User interface is unwanted, I don't want show anyone the Acrobat Reader interface who click the file just want to get a preview.
3. No place to put those parameters in.
This problem confused me a lot of days, I wish someone can give some hints.
Thank you very much!
(Maybe you will tell me to use Acrobat SDK, please don't, I'm afraid we cannot afford that)

>I have not read the document yet
This is the first step. There are many documents, but start with the
introductory/getting started material.
> with a index.pdx
A PDX is a search database to allow you to do fast searching in
Acrobat.
>
>About the relationship between Adobe Reader and Acrobat, as far as I know is that, the previous one is just the reading tool for PDF document, instead, Acrobat can modify and resave the PDF doc. Is it right?
Effectively, yes. But the Acrobat SDK is mainly for working with
Acrobat. It's very important to keep this clear, since you have said
you only have the free Reader, so 95% of what is in the SDK cannot
work for you.
>
>Simply my questions,
>1. I don't know which dll to refer in the .Net project to print with. Is the ActiveX folder in product folder?
Simply, there is no point asking these questions, yet, because you
have not started on the documentation.
But let's continue in the SDK forum, where I have posed what seems to
be a very important question about why print to file at all.
Aandi Inston

How to get the User Id from the user interactive task?

If I need to get the user id or whoever process the user interactive task and save this information to the database, how can I get the user identity who process the interactive task? I tried the owner, creator on the execdata, but it doesn't work.
Thank you

try using
Participant.id or Participant.name
in the interactivity and update this value in the database.
HTH
Narasimha
Edited by: Narasimha on Mar 6, 2011 9:42 PM

Is user interaction possible??

Hi...
just like passing parameters to the report... can we have user interaction possible with xml publisher??
I mean can I specify something like this on the report...
if(user clicked at some point)
{ show table if table not shown
hide table if table already shown }
Want to know if this kind of interaction is possible....if yes, how?

Brett
Thanks for your reply.
Actually my requirement is that I need to have a drill down of data like when I click on something, its details must be shown...
So from your reply, I understood that it could'nt be done.
And as you said , i tried embedding java script . but I am getting an exception saying-element script is not supported yet.
So my doubt is ,is the syntax same as <script>my js code</script> or do we have any different syntax to follow?
Thanks again!!

File Download Without User Interaction

Hello,
basically i want to transfer a file from one server to the
other. I have a fixed source URL and a ready file handler .jsp at
the destination server.
In the past I did a lot with FileReference and their Browse()
and Download() methods. Now i want to replace those points of user
interaction and more or less stream the download file into the
upload handler. Any ideas how i could achieve that?
Thanks and GzG
Nerun

http://forum.java.sun.com/thread.jspa?messageID=3578246&#3578246
Common sence would have told you that a <input type=file ... cannot be set with script.
Since this input can be set to hidden you might unwantingly submit files on every page
you visit.

Hi i want to execute 3 reports at one click without user interaction

hi Friends,
Hi i want to execute 3 reports with one click ie by putting radio button when we click on this this wants to execute all 3 reports with out user interaction pls try to understand and provide the solution pls
Thanks & Regards
Mohan Reddy

Hello,
To achieve this you can use the SUBMIT command after an user action.
Example
The program report1 has a stand-alone selection screen with the screen number 1100. In the program report2, an internal table with row type RSPARAMS and a ranges table are filled for this selection screen. These are transferred at SUBMIT together with a single condition.
Program accessed
REPORT report1.
DATA text TYPE c LENGTH 10.
SELECTION-SCREEN BEGIN OF SCREEN 1100.
SELECT-OPTIONS: selcrit1 FOR text,
                  selcrit2 FOR text.
SELECTION-SCREEN END OF SCREEN 1100.
Calling program
REPORT report2.
DATA: text       TYPE c LENGTH 10,
      rspar_tab TYPE TABLE OF rsparams,
      rspar_line LIKE LINE OF rspar_tab,
      range_tab LIKE RANGE OF text,
      range_line LIKE LINE OF range_tab.
rspar_line-selname = 'SELCRIT1'.
rspar_line-kind    = 'S'.
rspar_line-sign    = 'I'.
rspar_line-option = 'EQ'.
rspar_line-low     = 'ABAP'.
APPEND rspar_line TO rspar_tab.
range_line-sign   = 'E'.
range_line-option = 'EQ'.
range_line-low    = 'H'.
APPEND range_line TO range_tab.
range_line-sign   = 'E'.
range_line-option = 'EQ'.
range_line-low    = 'K'.
APPEND range_line TO range_tab.
SUBMIT report1 USING SELECTION-SCREEN '1100'
               WITH SELECTION-TABLE rspar_tab
               WITH selcrit2 BETWEEN 'H' AND 'K'
               WITH selcrit2 IN range_tab
               AND RETURN.
Regards.

Is it possible to remove user interaction in a eventListener ?

Hi,
I am working on two scripts that both need to deal with the user interaction.
This following script works just fine. The only matter is that Indesign alerts me that the script prevented the UI dialog from opening.
What if I don't want any alert ?
#targetengine "newdialog"
Application.prototype.main = function(){
     //app.addEventListener ("beforeNew", preventMe, false);
     var myMenuAction = app.menuActions.item("$ID/Document...");
     myMenuAction.addEventListener ("beforeInvoke", preventMe, false)
function preventMe(myEvent){
     //alert(myEvent.cancelable);
     myEvent.stopPropagation();
     myEvent.preventDefault();
app.main();
I thought about userInteractionLevel but I tried to use it recently and I couldn't get it working. My intention was to get an automated update of my modified links when opening a file.
It's like
app.scriptPreferences.userInteractionLevel
couldn't be set once the script has been launched.
#targetengine "autolinkupdate"
main();
function main(){
     var myMenuAction = app.menuActions.item("$ID/kPMOpenDocTextKey");
     myMenuAction.addEventListener("beforeInvoke",removeInteraction,false);
     //app.addEventListener("beforeOpen",removeInteraction, false);
     app.addEventListener("afterOpen",updatelinks, false);
function updatelinks(myEvent){
     var doc=myEvent.parent;
     var lk = doc.links;
     for(var i=0; i<lk.length; i++){
          try{
               lk[i].update();
          catch(e){}
     app.scriptPreferences.userInteractionLevel = UserInteractionLevels.INTERACT_WITH_ALL;
function removeInteraction(myEvent){
     app.scriptPreferences.userInteractionLevel = UserInteractionLevels.NEVER_INTERACT;
So my question is : Is it possible to remove user interaction in a eventListener ?
Thanks,
Loic

Assuiming NHTEST is a database link to the remote database connecting with SCOTT, use user_Tab_cols@NHTESTNicolas.

How to run eCATT in dialog mode(foreground) without user interaction(Enter)

Hi,
As part of performance testing using eCATT we want to execute a test script in dialog mode(foreground) without user interaction like pressing enter at end of each screen. The reason behind this is we want to run a test script 1000 times in dialog mode to analyze the performance of that particular transaction code. Hence its not practical to keep pressing enter at end of each screen. We do not want to execute this in background as that does not simulate the real time transaction processing and give the exact performance analysis.
We have a test script with VA01 recording and are able to execute it perfectly in background as well as foreground (by pressing enter at end of each screen).
I would like to know if there are any settings to be made to execute the test script in dialog mode without pressing enter. I have referred the below link which has not solved my purpose.
ECATT - Running in Foreground (Enter Key)
Thank You.

Gopi,
I never used this transaction before, but my approach would be as below. You may want to try and let me know how it works.
Before running this script from ST30, first try to run from SECATT for one iteration to make sure the script and target system RFCs are working. Then try again in ST30. Still if you have the issue, ask your basis to take a look when you kick off from ST30 in the target system whether ST30 were able to successfully make the RFC call to that system.
thanks
Venkat

Web view / Allow User Interaction always brings up Menu Bar

Hi,
I have recognized that a web view on the page which allows user interaction (for example animations with buttons) always causes the menu/navigation bar to pop up which is quite a pain. All other interactive elements don't do it so why would the web view need to cause this.
mulitstates on top of it or fake buttons obviously don't work since the are needs to be touch sensitive.
Any suggestions?
Cheers,
Alex

It depends on how the event listeners in the web view are written. for example simple <a href="link.html"></a> elements don't activate the DPS menu. The same is true for touchstart and click elements.
Try to implement your click/touch events differently. I haven't found the pattern which caused the menu to open, yet. But if you test around a little with different ways of aproch, I'm sure you can find a solutio (e.g. in one case I could solve it by not using event.preventDefault() in another case the touch event was bound within a javascript variable, which also caused the menu to show. etc. pp.)
Good Luck!

User interaction on VI and subVI running simultaneously

By using labview6.1 how can i create an application which hav some buttons on the vi (say parent VI) & on clicking on any of these buttons will pop another VI(say child VI) to execute.
NOTE :: Any child VI's(subVI) "Diagram" is in a while loop i.e. it will not return and has to wait for the user interaction.
PROBLEM :: Initially if i clicks on any button present on parent VI then
the corresponding childVI pops up and start executing,thats fine...., but
now if i clicks another button present on parent VI then the click event doesnt works i.e. one more child VI doen't comes up.
The conclusion is that the Graphical user Interaction can be only on called
SubVI(while in execution) but not on the main VI si
multaneously.
I hav searched examples for the similar kind of problem but didnt found any. Kindly help me for rectifying the above problem.

You have partially answered the question yourself;
"NOTE :: Any child VI's(subVI) "Diagram" is in a while loop i.e. it will not return and has to wait for the user interaction."
The fact that the parent is halted until the sub-vi returns is in other words as it is supposed to be; it's data flow controlled execution...However you can put the sub-vi in another loop (that way only that loop will halt), or you can call it dynamically using an invoke node with the wait until finished set to false.
MTO

Dowloading an XML file in Webdynpro without User Interaction

Hi Experts,
My Requirment is i need to download an XML file in Cdrive Request folder. This should be done without any UI elements or User interaction. Download should be done in background. Are their any function modules or classes.
Thanks,
Sandy.

In continuation:
Hi Lukas,
Thanks for Reply, I Used this approach already but it's showing a dump file could not be open.
Thanks,
Sandy.
can you please post your entire code here?
EDIT: also post the dump please
regards, Lukas
Edited by: Lukas Weigelt on May 27, 2011 11:12 AM

Communication user- Interactive & Non interactive login

Similar Messages

Maybe you are looking for