Communication with the modem

I need to implement wich listen to calls on modem, and upon call recevid it run another application with the caller number as argument

The below would be a better forum to post this question:
http://forum.java.sun.com/forum.jspa?forumID=8
Here is a link to java communication api:
http://java.sun.com/products/javacomm/

Similar Messages

Communication with PCMCIA-modem card

Hi there,
I have to extend my LabVIEW driven sensor system with a PCMCIA-modem
card (actually a GSM-card) so that my setup can transmit data
automatically via GSM under special circumstances.
Can anyone help me how to communicate with the modem-card and how to use
the AT-commands in LV?
Thanks a lot.
Markus

If a commercial solution is an option, you might consider contacting some of the
NI Alliance Members. I know of one that has a product called "ModemNOW!" that
I've heard good things about. Check out their page on the NI Solutions
Directory page (sorry for the lengthy URL, the company is named Microsys):
http://digital.natinst.com/alliance.nsf/b7d49ea02c8aa32c8625642f007e2ba6/af281fa53d7c4c47862562ca004b5ae2?OpenDocument
There are others out there. Another good site is the VI Market one:
http://vimarket.com/
I haven't run across any particularly complete or general-purpose examples for
modem communications internally at NI.
--John Lum
National Instruments
Markus Buchner wrote:
> GSM means Global System for Mobile Telecommunications. So the problem
is how
> to set up a wireless data connection with LV.
>
> Labview User Name wrote:
>
> > What is GSM?
> >
> > I have used ethernet cards for remote operations with Labview on numerous
> > occasions.
> >
> > It works great and is too easy to program.
> >

"The software required for communicating with the iPod is not installed..."

I realize my explanation of my problem is long-winded, so if you want a shortened version, here it is:
I've followed all the instructions trying nearly everything, and no matter what I do, iTunes gives me the error saying: "The software required for communicating with the iPod is not installed correctly. Please reinstall iTunes to install the iPod's software." My G5 iPod (60GB) works on two other computers (both without any music on them), so I assume there something wrong with my computer and not the iPod itself.
Now for the long-winded story of the last eight hours of my life...
I just got the Generation-5 iPod Video (60GB) a today and I'm having problems already. I followed the instructions and installed the iPod software and then plugged in my iPod (iTunes has been on my computer for a while now). I was expecting iTunes to open after plugging in the iPod, but my device manager only detected and installed "a new device". I manually opened iTunes and got an error saying: "The software required for communicating with the iPod is not installed correctly. Please reinstall iTunes to install the iPod's software."
After re-installing the iPod software and iTunes, and restarting my computer countless times, I came looking for help here. I found this page, which seemed to outline my problem exactly. My computer recognizes the iPod as a drive, but iTunes won't have anything to do with it. I have all the symptoms outlined in the heading, so I hoped to solve my problem there. I followed the instructions step-by-step, and after the final restart, I open iTunes to get the same exact error message.
I decided to determine whether there was a problem with my iPod or if it was my computer. I plugged my iPod into my uncles's powerbook, and got to the point where I can name and configure my iPod. I expected it to work flawlessly on a Mac (which it did) but there is no way for me to continue using a Mac (after tomorrow) for my iPod. This formatted the iPod for a Mac, so I went to another (different from the original) Windows computer, clean of any iTunes and iPod software, and followed the instructions exactly as they're supposed to be followed. After the installations, I plugged in my iPod, and although iTunes didn't open, I was able to format back to Windows and name my iPod (a step in the right direction). I should note that my (anti-iPod) computer is a Windows XP Pro, and the working one is Windows XP Home Edition. This was all well and good, until I remembered there was no music on this computer. So my iPod is completely working there, but there isn't anything I can do with it.
Next, I came back here and browsed around the discussion boards, hoping to find somebody with a similar problem to mine. There seems to be alot of errors concerning iTunes not recognizing the iPod, but none of the solutions I tried worked for me, including changing the drive letter. I get the "iPod Service Error" while trying to restore to factory settings through iPod updater.
Of course, I could transfer all 32GB of music from one computer to another, but the second (working) computer isn't mine and I won't have access to it in a couple months. It would be most convenient if I could get my iPod working on my own computer. Any help would be appreciated, especially from somebody who has solved this problem or know how to solve this problem.
P.S.
Here are some other minor details that my be important, but I didn't feel they were worth including.
- My brother has his iPod mini set up on my computer, under a different user login. He gets the same error once in a while, but re-installing iTunes always solves the problem for him. I had him try solving my problem his way, but nothing worked for him either.
- My computer is an AMD Athlon 64 Processor 3200+, 512MB RAM with Windows XP Pro SP2 installed. My internal hard drive is partitioned, using the letters C, D and H (C being my system files, D used for recovery files and H for my applications and games). My E drive is used as a DVD/CD-ROM Drive, and drives F and G are reserved for virtual drives (none have been running during this entire ordeal). My external hard drive uses the letter I, and I manually set my iPod to use the letter J (I've never used 'J' for anything else before).
- Yes, I have downloaded and installed the latest versions of iTunes and the iPod software.
- I'm assuming there is a problem with my computer and not my iPod, since it worked on both other computers I tried. I'm hoping it's as simple as changing a registry file or cleaning out (yet another) temp directory.

Solution to "Software required for communicating with the iPod is not installed"!
I battled this same problem for about 5 hours. Going through re-installations, the "5 R's", all these discussion boards. Nothing worked.
The problem is that iPodService was repeatedly crashing after minute or so. You can verify this by hitting Ctrl-Alt-Delete and noting that iPodService is missing from the process list (sort by image name), or by right-clicking on My Computer and selecting "Manage", then going to Services and checking out the IPodService service - if it gives you the option to "Start", then it's not running.
Here is what worked.
1. De-install iTunes and iPod (if you have the updater installed) completely by going to Start --> Control Panel --> Add/Remove Programs. Also delete the C:\Program Files\iTunes and c:\Progam Files\iPod\bin directories. (Don't worry, this doesn't affect your saved music files.)
2. Log in as an Administrator
3. Go into the registry (note this is dangerous - you should be careful) and remove the iPod entries that the uninstaller misses.
3.1 Go to Start menu --> Run.
3.2 Type in "regedit".
3.3 Go to HKEYCLASSESROOT --> IPodService.iPodManager.
There are two keys here, iPodManager and iPodManager.1. In my case, I did not have permission to view either of these. I think this is the root cause of the problem. I think the installer can't properly update these because it doesn't have permission. So you need to change the permissions:
3.4 Right-click on IPodService.IPodManager
3.4.1 Select "Permissions..." A warning will appear saying you don't have permission, but that you can change permissions.
3.4.2 On the window that launches, click on "Advanced..."
3.4.3 Click on the "Owner" tab.
3.4.4 Select a valid account (the one you're logged in under) under "Change Owner To".
3.4.5 Hit "OK".
3.4.6 Back on the main Permissions window, hit Add and add the same account as a valid user.
3.4.6.1 Where it says "Enter the object names to select", type in the account name, e.g. "Smith".
3.4.7 Click on the "Allow" checkboxes for "Full Control" and "Read".
3.4.8 Hit "OK".
3.5 Repeat procedure for the "iPodManager.1" key.
3.6 Now right-click and delete both of these keys.
I think that's all that's required, but I also searched through the registry and deleted the following keys.
4. Other keys I deleted:
4.1 HKEYCLASSESROOT --> IPodManager.IPodManagerUI.1
4.2 HKEYLOCALMACHINE --> SOFTWARE --> Apple Computer Inc. --> iPod
I think that's all I deleted, but I'm not positive. I seached for instances of "ipod" using the Find... and Find Next functions under the Edit menu.
5. Exit out of the registry editor.
6. Re-install iTunes. I re-installed iTunes and reconnected the iPod, and everything worked.
I want to repeat that editing the registry can completely mess up your computer if you modify the wrong things, so only do this if you're comfortable, and be extremely careful.
Hopefully this helps!
Apple support people: assuming this works, please add it to your solutions page, and feel free to reimburse me for spending half of Christmas figuring this out.
Mark

There is a problem communicating with the printer.

I have a Lexmark Interpret S405. I am using a MBP laptop with WiFi, running 10.5.8. I have a cabled (non-wifi) Linsys router. I am using an Airport Express.
I was finally able to get the WiFi light on the Lexmark to be static green after reinstalling the Lexmark WiFi setup and reconfiguring my Airport settings so that both the computer and printer see each other.
In fact, I even updated the driver from Lexmark's Web site last night and I watched the WiFi light on the printer blink green indicating that the installation of the driver update was being communicated to the printer.
However, when I print, it opens the print window and says first "Looking for S300-S400", then it says "Printer is now online". Then after about 10 seconds, I get this error: "There is a problem communicating with the printer. Make sure the printer is powered on and connected to the computer. Delete or hold the job and try again."
I've exhausted Lexmark's technical databases and couldn't find the answer here.
I've read that one possible solution was to delete all the printers from the "Print & Fax" system preferences window and re-add. That didn't work.
Lexmark says for: The printer communicating on a network; however, the printer is not responsive. Possible causes could be:
1. Your printer is associated with a network, router, or access point, but it is not your network.
2. A software process is blocked by a system security firewall preventing network communication.
3. You are logged into Virtual Private Network (VPN).
4. You are connected to a network but have decided to switch to a USB connection.
I don't have a VPN and have removed the USB cable, then restarted both printer and computer, and deleted printers in Sys Prefs, restarted, and still no solution.
I can print directly via USB cable, but want to print wirelessly.
Lexmark also says to enter my PIN (which I have pulled out from the print menu screen on the printer) in the System. That tells me a lot...
Network settings on the print window on the printer also tell me Signal strength is 5 (excellent) and that I am on the network my airport is on.
Message was edited by: Macman17

I bet this is too late but...
Are you trying to print through the airport express wirelessly or the built in wireless of the lexmark? If you want to use the airport express, there is no need to mess with the wireless printing on the lexmark at all. The airport express will be easy to set up, all the wireless setups through the printers are a pain.

SOLUTION to "Software required for communicating with the iPod is not insta

Folks, I can not take credit for this.....you should send your checks to MarkinMadison. I've included his post in it's entirety. For me, this was the Holy Grail !!
My only comment is make sure when you are in the registry that you hit the "apply" button to change and add things.
This probably won't solve everyone's problem but it clearly solved mine (and I tried all other "solutions"), as well as Mark's.
Apple: please find out who MarkinMadison is and either cut him a big check or offer him free Ipods for life.
"Solution to "Software required for communicating with the iPod is not installed"!
I battled this same problem for about 5 hours. Going through re-installations, the "5 R's", all these discussion boards. Nothing worked.
The problem is that iPodService was repeatedly crashing after minute or so. You can verify this by hitting Ctrl-Alt-Delete and noting that iPodService is missing from the process list (sort by image name), or by right-clicking on My Computer and selecting "Manage", then going to Services and checking out the IPodService service - if it gives you the option to "Start", then it's not running.
Here is what worked.
1. De-install iTunes and iPod (if you have the updater installed) completely by going to Start --> Control Panel --> Add/Remove Programs. Also delete the C:\Program Files\iTunes and c:\Progam Files\iPod\bin directories. (Don't worry, this doesn't affect your saved music files.)
2. Log in as an Administrator
3. Go into the registry (note this is dangerous - you should be careful) and remove the iPod entries that the uninstaller misses.
3.1 Go to Start menu --> Run.
3.2 Type in "regedit".
3.3 Go to HKEYCLASSESROOT --> IPodService.iPodManager.
There are two keys here, iPodManager and iPodManager.1. In my case, I did not have permission to view either of these. I think this is the root cause of the problem. I think the installer can't properly update these because it doesn't have permission. So you need to change the permissions:
3.4 Right-click on IPodService.IPodManager
3.4.1 Select "Permissions..." A warning will appear saying you don't have permission, but that you can change permissions.
3.4.2 On the window that launches, click on "Advanced..."
3.4.3 Click on the "Owner" tab.
3.4.4 Select a valid account (the one you're logged in under) under "Change Owner To".
3.4.5 Click the checkbox that says: "Replace owner on subcontainers and objects."
3.4.5 Hit "OK".
3.4.6 Back on the main Permissions window, hit Add and add the same account as a valid user.
3.4.6.1 Where it says "Enter the object names to select", type in the account name, e.g. "Smith".
3.4.7 Click on the "Allow" checkboxes for "Full Control" and "Read".
3.4.8 Hit "OK".
3.5 Repeat procedure for the "iPodManager.1" key.
3.6 Now right-click and delete both of these keys.
3.7 If you can't delete, you might need to open up the keys and repeat the procedure on the sub-keys.
4. Exit out of the registry editor.
5. Re-install iTunes. I re-installed iTunes and reconnected the iPod, and everything worked.
I want to repeat that editing the registry can completely mess up your computer if you modify the wrong things, so only do this if you're comfortable, and be extremely careful.
Hopefully this helps!
Apple support people: assuming this works, please add it to your solutions page, and feel free to reimburse me for spending half of Christmas figuring this out.
Mark"
Dimension 4600 Windows XP

I have also posted the same question, earlier today. I purchased two for my children and cannot get the iPod to communicate with the computer. I have the iTunes software on my system, but during the installation process I cannot click the NEXT button, once I plug the iPod cable in. The computer does not detect it. I have tried all 6 USB 2.0 ports. I even removed the Dell Jukebox and MusicMatch programs. I am not a computer savvy person - just a mom who wants to give these to my children for Christmas. This is the first "chat" site I have even registered on. I am so very frustrated. Hopefully, this can be resolved.

"An error occurred in the communication with the BW server"

Hi, when I open BEx Analyzer and try to connect to my BW server to run a query, I get this message, "An error occurred in the communication with the BW server".
Can someone help me.
thanks
Pat.

If it's happening consistently, it could be a problem with your local m/cs MS office and/or SAP GUI.
If it was working before:
1) Uninstall SAP GUI and MS office.
2) Install MS Office and SAP GUI...then try to connect to BW.
Good luck, BB

"Error intitializing communications with the LMS" in Captivate 8.0.1

After updating to 8.0.1.242 and publishing projects as SCORM 1.2 in html5, I get the error message "Error intitializing communications with the LMS" both in the LMS we use and in ScormCloud. This happens in IE 10.0.9200. I am pretty sure we have not had this message before. I had a colleague generate the same project for me using 8.00.145 and I get no error message. Any input on what causes this would be appreciated.

Can you share your project on id: [email protected]
we will try to investigate this at our end. Also please send the exact steps how you are able to get this error.
Regards
Shriyansh
Adobe Engineering Team

My iWork (pages and keynote) are not communicating with the iCloud. I haven't changed anything and all of the sudden there is no sync happening. My iCloud account is fine as i can create documents on my iPad and they appear on iCloud.

my iWork (pages and keynote) are not communicating with the iCloud. I haven't changed anything and all of the sudden there is no sync happening. My iCloud account is fine as i can create documents on my iPad and they appear on iCloud. However, when i change documents on my mac (documents that are supposed to be in the iCloud), the changes do not sync with my other devices nor with iCloud. Even when i create new documents on my mac and save them to iCloud, all seems okay and i can access them from my mac, however they do not show up in the iCloud and i can't access them with my other devices.
Most recent version of mountain lion updated over a month ago. New iPad in use for over a month.
thanks

The same thing is happening to me, Mail was fine about an hour ago and now is rejecting correct password. Typical when today I'm waiting some important emails!

Lost communication with the scanner of my LaserJet Pro CM1415 fnw color MFP with Windows 8.1

I have just upgraded my PC to Windows 8.1 (it came with Windows 8), and now I have "lost communication" with the scanner element of the CM1415...... The printer part is working fine!
I have read various fixes for other printers for 8.1, but does anyone have any experience with this particular model and this particular problem?
PS. The latest HP driver available for the CM1415 states that it is the same as the one delivered in the box.......

Hi RTB2014,
Welcome to the HP Forums, I hope you enjoy your experience!
I understand you are unable to scan after updating the computer to Win 8.1.
I will be happy to help you.
Did you uninstall the printer software and reinstall the downloaded drivers?
If you didn't then I would uninstall and reinstall the downloaded drivers.
I have provided a URL to uninstall the printer software.
Fully uninstall the printer in Win 8.
You can download the newest drivers from this link. Select the operating system and click next.
HP LaserJet Pro CM1415fnw Color Multifunction Printer Drivers.
If you are still having issues I would download and run the Print and Scan Doctor since it might resolve the issue
automatically. Find and Fix Common Printer Problems Using HP Diagnostic Tools for Windows.
I believe that this will provide a resolution to your issue. Thank you.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

I connected my iPod to my PC and got a message 'The software for communicating with the iPod is not installed correctly.

I connected my iPod to my PC and received a message box that read "The software for communicating with the iPod is not installed correctly. Please reinstall the iPod's software." Not sure what I need to do. I did uninstall all of my iTunes and related software components and then reinstalled the latest version of iTunes but that did not correct the problem and I now can't access my iTunes library at all.

Another thing is that iPod Touch shows up fine...I've tried every other ipod from older 4gig Nanos to 120gb Classics and none of them work..this is really annoying!

Safari cannot open the page ~ The error was: "There was a problem communicating with the web proxy server (HTTP)

Help! I was cruzing along just fine and went out tonight only to receive the message above:
Cannot open Page
Safari cannot open the page
The error was: "There was a problem communicating with the web proxy server (HTTP)."
I have had all the Apple iPhone phone. Have never encountered anything like this.
All systems are GO as soon as I log on to wifi.
Can anyone help, please.

I am also fixed. I also loaded Onavo, but that was the other day ... this is what I did with the help of online chat with AT&T ...
I went to:
Settings
Wifi
I selected the network I was working on by hitting the blue arrow located on right side
At the detail page of that network I scolled down to the bottom to find HTTP Proxy boxes
I was on Off and changed it to Auto and it worked!
I was soo jazzed!!
Instructions said if it was already on AUTO, to change it to Manual and make your Port = 80 but I didn't have to do that!
YIPPIE!! I'm a new man!!
Go to settings -----> WI-FI -----> select the network you're using ------> hit the blue arrow located on the right-side of the network name (ie: show details of that network), this takes you to another page.
--------> at the bottom of the page you'll see "HTTP Proxy" boxes (located below the "renew lease" button) ---------------> change the proxy to AUTO. Note: if you're already at AUTO, change it to "Manual" and make your Port = 80.

Need urgent help with communicating with the HP 4155B analyser with Labview

i folks,
I'm currently trying to communicate with our HP 4155B semiconductor pamaremter analyser. I do not have experience with GPIB yet. I have installed the NI VISA.
I was wondering if anyone could help with getting me started on how to start communicating with the device using Labview.
I'm not certain where to start.
Kind regards
Rob

Hi,
Thanks for the help. I now have communication with the instrument.
I was wondering if it's possible to to setup a data measurement (I-V Sweep) and be able to read the measurement data in realtime as it is being measured. So I basically see the graph updating itself on the PC during the measurement.
Is this possible? Could anyone give advice on how I can go about this or are there any examples that can help me understand how to do this?
I'm not completely sure how to initialise the instruemnt for communication and handle VISA WRITEs and READs. within LabView
Best regards
Rob

Getting a "Your network preferences prevent us from communicating with the server" error in dw 5.5

Hello, lately i noticed dw 5.5 can't seem to use browserlab, it says "Your network preferences prevent us from communicating with the server"
I can connect to BC and other ftp servers no problem, I've also turned off my firewall to be sure and it still won;t connect.
The only info I found on this error is a tip on how to turn off browserlab, which in turn gets this error, Not sure why you would wnat to shut the feature off, but no tip to turn it on. The tip on editing the registry doesn;t help because itsyays to change the registry key to 0 and all communication of adobe products will be turned off, however the key does exist and is set to 1, so I can;t even try that tip in reverse to enable, itshould be communication already.
Any help would be appreciated, I am just competinga site and was about to check it in all the browsers, an incredibly useful and time saving feature, but I can't now.
Rich

Phil, the only screenshot I've seen from you is the error message (and I can't seem to view the others you just posted), so apologies if I told you something you'd already tried. We still think there should be a solution to this, it's just that debugging issues this way can be a little difficult, so please bear with us.
At this point our best guess is that there is a registry setting that got changed that is causing the issue for both of you. We have been able to repro the issue on Windows XP by setting the following 32-bit registry entry to 0. The issue was fixed by changing it back to 1. We've also tested on Windows 7 and verified the same thing with the 64-bit registry entry. Apologies if I'm suggesting something that any of you has already tried, but no details were provided about which registry entry you checked or what article you were looking at.
From the CSLive team:
"To my knowledge the only way to get that error message is to disable CSLive in the registry. The Customer does not mention the exact article or reg value that he is looking at in his post but it should be:
For 32-bit systems: HKEY_LOCAL_MACHINE\SOFTWARE\Adobe\AdobeOnlineDefault.
For 64-bit systems: HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Adobe\AdobeOnlineDefault
http://kb2.adobe.com/cps/846/cpsid_84665.html
He should delete the AdobeOnlineDefault entry in the registry and try again. (he may need to stop and restart CS55Services Manager or reboot machine)."
Let us know if this fixes the issue for you or not. As with any change to the registry we recommend you make a backup first and proceed carefully.
Thanks,
Mark

Scanning Device not Communicating with the Computer

Can anyone help? I go to launch my Hp Director software to scan a document and an error message appears that says "An error occurred communicating with the scanning device. Please ensure that the scanning device is connected properly and try again." This has happened before but I can't remember the steps performed on the Menu of the scanner. Does anyone know how to get the computer and Laserjet 2840 to communicate?
Thanks

AlmostThere wrote:
If the error message appears on the computer while scanning from a networked product, click this link: http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=au&product=3204785&docname=c00897542. If with USB, click this link: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00040499&cc=au&lc=en&dlc=en&product=3204785
Regards,
AlmostThere
your link @ http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=au&product=3204785&docname=c00897542 doesn't work

Captivate 8 Tin Can - problem communicating with the learning record store

When publishing a course to Tin Can format, what should I enter in the 'Identifier' field?
If I publish with the default 'Course_ID1' text, I get an error when launching the course on our LMS. Errors says "There was a problem communicating with the learning record store."

Hello,
Welcome to Adobe Forums.
Please share your contact information via [email protected]
Thanks,
Vikram Gaur
Adobe Support

Communication with the modem

Similar Messages

Maybe you are looking for