Communications error when connection my camcorder

I am having trouble downloading my movie tapes to the iMac. I use a canon mvx460 camcorder .When I connect the camcorder to the iMac, it recognises the camcorder. I can make the camcorder play the tape from the imac but does not generate a picture. Then after a few minutes I get 'communications error' displayed. Sometimes i can connect but stops within a few minutes. I removed the imovie plist to another location but still no joy.
On the Macbook pro I have no trouble although it runs on lion but still has imovie 8.
I have just installed iMovie '11 on the iMac as I thought it was iMovie 8 that was giving me trouble with Lion, but it has made no difference.
Help
Llasa

you can try turning the phone on and if u get it to come on this is a reset, *#7370#. if the phone wont turn on. hold these keys while powering up, 3 * green and this will perform a factory reset, you will lose all of the data on the phone. other than that a trip to a nokia service centre will be needed. hope this helps
EmoKid

Similar Messages

Camcorder Panasonic PV-GS300: "Communication Error" when connecting it..?

I have a Panasonic PV-GS300 camcorder, which I have connected to my iMac through a Firewire 4/9pin, but all I get when opening iMovie is "Communication Error" on a blue screen. I believe the Mac does not recognize the camera and I can not import the video images.
Any advice? Do I need a special driver to be able to use my camcorder for my mac and if so where can I download it?
New Mac user here.

Try these steps in this order.
Connect the camera to the Mac with the firewire cable.
Power up the camera and make sure it is in VCR mode.
Power up the Mac. At this stage when Mac fires up you should be able to see the camera recognized in the System Profiler of Mac as part of the firewire tree. If not then there is a basic connection problem somewhere. If YES:
Open iMovie and capture.
If you use Final Cut, the Easy Setup needs to be configured to match your incoming footage from the camera or it probably won't work.
Al

Elph 300 HS shows communication error when connected to computer?

Hello,
When I connect my Elph 300 HS to the computer via USB it shows a communication error and the computer does not seem to register that it is connected. Any thoughts on how to fix this?
Thanks,
MZM

Hi MZM!
To have a better understanding of your issue, please let everyone know what operating system (Windows Vista/7/8 or Mac OS 10.X) you are using. That way, community will be able to assist you with suggestions appropriate for your product.
If this is an urgent support need, please CLICK HERE to reach our friendly Technical Support Team.

Active failed. Communication error when performing integrations.

I actived an activity but the request failed. In the request log,the last rows indicated the reason,but I can't understand and don't know how to solve it. Below show the last rows of the log:
Change request state from SUCCEEDED to FAILED
Error! The following problem(s) occurred during request processing:
Error! Communication error when performing integrations. HTTP protocol error [reason: Parsing of the response body failed [reason: Comment must start with "<!--".]]. Request FAILED.
REQUEST PROCESSING finished at 2010-09-05 03:00:16.468 GMT and took 2 m 36 s 172 ms

I copied SCs' info from http://host:port/sap/monitoring/ComponentInfo below:
Software Components
Vendor Name Version Location Applied
sap.com WD-APPS 7.11 SP3 (1000.7.11.3.0.20090708034600) SAP AG 20100227111730
sap.com WD-FLEX 7.11 SP3 (1000.7.11.3.0.20090708034600) SAP AG 20100227114200
sap.com ENGINEAPI 7.11 SP3 (1000.7.11.3.0.20090707235900) SAP AG 20100227104639
sap.com LM-MODEL-CE 7.11 SP3 (1000.7.11.3.0.20090708100200) SAP AG 20100227110643
sap.com LM-SLD 7.11 SP3 (1000.7.11.3.0.20090708100200) SAP AG 20100227111825
sap.com WD-RUNTIME 7.11 SP3 (1000.7.11.3.0.20090714195600) SAP AG 20100227112212
sap.com WD-ADOBE 7.11 SP3 (1000.7.11.3.0.20090708034600) SAP AG 20100227110000
sap.com EP-MODELING 7.11 SP3 (1000.7.11.3.0.20090708052800) SAP AG 20100227113917
sap.com J2EE-FRMW 7.11 SP3 (1000.7.11.3.0.20090707235900) SAP AG 20100227110242
sap.com ENGFACADE 7.11 SP3 (1000.7.11.3.0.20090707223600) SAP AG 20100227111458
sap.com ESREG-BASIC 7.11 SP3 (1000.7.11.3.1.20090819222300) SAP AG 20100227110634
sap.com CAF 7.11 SP3 (1000.7.11.3.0.20090708030100) SAP AG 20100227114351
sap.com ESF 7.11 SP3 (1000.7.11.3.0.20090716184100) SAP AG 20100227111734
sap.com CORE-TOOLS 7.11 SP3 (1000.7.11.3.0.20090707235900) SAP AG 20100227112432
sap.com EP_BUILDT 7.11 SP3 (1000.7.11.3.0.20090708053700) SAP AG 20100227112608
sap.com APP-LIB 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227105136
sap.com MOIN_BUILDT 7.11 SP3 (1000.7.11.3.0.20090708055000) SAP AG 20100227105811
sap.com LMNWABASICMBEAN 7.11 SP3 (1000.7.11.3.0.20090708100200) SAP AG 20100227112135
sap.com ESCONF_BUILDT 7.11 SP3 (1000.7.11.3.0.20090708053700) SAP AG 20100227110749
sap.com VCFRAMEWORK 7.11 SP3 (1000.7.11.3.0.20090708050100) SAP AG 20100227111401
sap.com LMINTERNALAGENT 7.11 SP3 (1000.7.11.3.0.20090708100200) SAP AG 20100227110251
sap.com APP-LIB-BASIC 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227104638
sap.com ESI-UI 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227112458
sap.com WDEXTENSIONS 7.11 SP3 (1000.7.11.3.0.20090708083400) SAP AG 20100227114257
sap.com LMNWACDP 7.11 SP3 (1000.7.11.3.0.20090708100200) SAP AG 20100227112218
sap.com EP-CONNECTIVITY 7.11 SP3 (1000.7.11.3.0.20090708052800) SAP AG 20100227112502
sap.com LMNWAUIFRMRK 7.11 SP3 (1000.7.11.3.0.20090708100200) SAP AG 20100227114149
sap.com SERVERCORE 7.11 SP3 (1000.7.11.3.0.20090721210400) SAP AG 20100227110257
sap.com CE-RA-EDM 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227110932
sap.com EP-BASIS-API 7.11 SP3 (1000.7.11.3.0.20090708052800) SAP AG 20100227112504
sap.com ESMP_BUILDT 7.11 SP3 (1000.7.11.3.0.20090708055000) SAP AG 20100227110214
sap.com ESREG-SERVICES 7.11 SP3 (1000.7.11.3.2.20091001033900) SAP AG 20100227112210
sap.com ESP_FRAMEWORK 7.11 SP3 (1000.7.11.3.2.20090914172400) SAP AG 20100227112151
sap.com VCKITBI 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227113947
sap.com BI_UDI 7.11 SP3 (1000.7.11.3.0.20090708053700) SAP AG 20100227114349
sap.com VCFREESTYLEKIT 7.11 SP3 (1000.7.11.3.0.20090708050100) SAP AG 20100227114146
sap.com EP-RUNTIME 7.11 SP3 (1000.7.11.3.0.20090715192600) SAP AG 20100227114235
sap.com BI-BASE-S 7.11 SP3 (1000.7.11.3.0.20090708074100) SAP AG 20100227114355
sap.com JSPM 7.11 SP3 (1000.7.11.3.0.20090721210400) SAP AG 20100227110220
sap.com UDDI 7.11 SP3 (1000.7.11.3.1.20090928214200) SAP AG 20100227110233
sap.com WSRM 7.11 SP3 (1000.7.11.3.0.20090708051400) SAP AG 20100227110903
sap.com UMEADMIN 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227112447
sap.com SAP_BUILDT 7.11 SP3 (1000.7.11.3.0.20090708053700) SAP AG 20100227112125
sap.com VTP_BUILDT 7.11 SP3 (1000.7.11.3.0.20090708053700) SAP AG 20100227104841
sap.com J2EE-APPS 7.11 SP3 (1000.7.11.3.0.20090707235900) SAP AG 20100227112629
sap.com MESSAGING 7.11 SP3 (1000.7.11.3.3.20090909003900) SAP AG 20100227114300
sap.com FRAMEWORK 7.11 SP3 (1000.7.11.3.0.20090721210500) SAP AG 20100227114152
sap.com LMNWATOOLS 7.11 SP3 (1000.7.11.3.0.20090708100200) SAP AG 20100227114149
sap.com CAF-MF 7.11 SP3 (1000.7.11.3.0.20090708030100) SAP AG 20100227111731
sap.com CAF-UI 7.11 SP3 (1000.7.11.3.0.20090708093200) SAP AG 20100227112401
sap.com SAPNWDEMO 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227104638
sap.com MMR_SERVER 7.11 SP3 (1000.7.11.3.0.20090708053700) SAP AG 20100227114353
sap.com DI_CLIENTS 7.11 SP3 (1000.7.11.3.0.20090708053700) SAP AG 20100227112503
sap.com UWLJWF 7.11 SP3 (1000.7.11.3.0.20090708074100) SAP AG 20100227113931
sap.com VCBASE 7.11 SP3 (1000.7.11.3.0.20090708050100) SAP AG 20100227112627
sap.com BI-WDALV 7.11 SP3 (1000.7.11.3.0.20090715032600) SAP AG 20100227111328
sap.com BI-WDEXT 7.11 SP3 (1000.7.11.3.0.20090708083300) SAP AG 20100227114258
sap.com SOAMONBASIC 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227112447
sap.com EP-ADMIN 7.11 SP3 (1000.7.11.3.0.20090726162100) SAP AG 20100227114239
sap.com EP-BASIS 7.11 SP3 (1000.7.11.3.0.20090708052800) SAP AG 20100227112829
sap.com LMNWABASICAPPS 7.11 SP3 (1000.7.11.3.0.20090727232800) SAP AG 20100227114323
sap.com LMNWABASICCOMP 7.11 SP3 (1000.7.11.3.0.20090726191000) SAP AG 20100227112449
sap.com LMCFG 7.11 SP3 (1000.7.11.3.0.20090726191000) SAP AG 20100227112609
sap.com LMCTC 7.11 SP3 (1000.7.11.3.0.20090708100200) SAP AG 20100227114321
sap.com NWTEC 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227112331
sap.com SR-UI 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227112359
sap.com BASETABLES 7.11 SP3 (1000.7.11.3.0.20090707235900) SAP AG 20100227112423
sap.com CFG_ZA_CE 7.11 SP3 (1000.7.11.3.0.20090707235900) SAP AG 20100227105952
sap.com LM-CORE 7.11 SP3 (1000.7.11.3.0.20090707235900) SAP AG 20100227111845
sap.com DI_CBS 7.11 SP3 (1000.7.11.3.0.20090708100200) SAP AG 20100227111119
sap.com BRMS-BUILDT 7.11 SP3 (1000.7.11.3.0.20090708055000) SAP AG 20100227104935
sap.com XI_CNT_SAP_BASIS 7.11 SP1 (1000.7.11.1.0.20081108235600) SAP AG 20100226194653
sap.com BRMS-FACADE 7.11 SP3 (1000.7.11.3.0.20090708055000) SAP AG 20100227105857
sap.com BPEM-CONTENT 7.11 SP3 (1000.7.11.3.0.20090708082900) SAP AG 20100227111116
sap.com ADSSAP 7.11 SP3 (1000.7.11.3.0.20090708053700) SAP AG 20100227104529
sap.com BPEM-PP 7.11 SP3 (1000.7.11.3.0.20090708082900) SAP AG 20100227110939
sap.com BPEM-HIM 7.11 SP3 (1000.7.11.3.0.20090708055000) SAP AG 20100227110948
sap.com DI_DTR 7.11 SP3 (1000.7.11.3.0.20090708100200) SAP AG 20100227110723
sap.com BPEM-CORE 7.11 SP3 (1000.7.11.3.0.20090708055000) SAP AG 20100227112433
sap.com BPEM-FACADE 7.11 SP3 (1000.7.11.3.0.20090708055000) SAP AG 20100227111735
sap.com SAP_XIGUI 7.11 SP3 (1000.7.11.3.2.20090819222300) SAP AG 20100227111517
sap.com SAP_XIESR 7.11 SP3 (1000.7.11.3.3.20091001183900) SAP AG 20100227111819
sap.com SERVICE-COMP 7.11 SP3 (1000.7.11.3.0.20090708055000) SAP AG 20100227112210
sap.com BPEM-WDUI 7.11 SP3 (1000.7.11.3.0.20090708082900) SAP AG 20100227112404
sap.com GP-VC 7.11 SP3 (1000.7.11.3.0.20090708091600) SAP AG 20100227112422
sap.com GP-PP 7.11 SP3 (1000.7.11.3.0.20090708091600) SAP AG 20100227113936
sap.com GP-CORE 7.11 SP3 (1000.7.11.3.0.20090708091600) SAP AG 20100227112606
sap.com DI_CMS 7.11 SP3 (1000.7.11.3.0.20090708100200) SAP AG 20100227114059
sap.com BPEM-MON 7.11 SP3 (1000.7.11.3.0.20090708082900) SAP AG 20100227112502
sap.com VOICERT 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227111455
sap.com BRMS-CORE 7.11 SP3 (1000.7.11.3.0.20090708055000) SAP AG 20100227114147
sap.com IDEUPDSITECE 7.11 SP3 (1000.7.11.3.0.20090708112000) SAP AG 20100227104951
sap.com BPEM-FLEXUI 7.11 SP3 (1000.7.11.3.0.20090708055000) SAP AG 20100227104710
sap.com BPEM-BUILDT 7.11 SP3 (1000.7.11.3.0.20090708055000) SAP AG 20100227104645
sap.com VOICEVC 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227104733
sap.com IDEUPDSITETOOLS 7.11 SP3 (1000.7.11.3.0.20090708053700) SAP AG 20100227112428
test.sap.com HM-WDUIDMKTSCNR 7.11 SP0 (1000.7.11.0.0.1268322642085) Local Workplace 20100324083612
test.sap.com HM-WDUIDMKTCNT 7.11 SP0 (1000.7.11.0.0.1268322933427) Local Workplace 20100324083656
test.sap.com HM-WDUIDMKTCORE 7.11 SP0 (1000.7.11.0.0.1268322880287) Local Workplace 20100324083659

RFC Communication error when doing initial indexing

Hello Everyone,
I have a quick question, when doing the initial index rollup for a BIA index the job is failing with RFC communication error.
We currently have the setting related to " TREXRfcServer threads" set to "Automatic Changes" in order to avoid the RFC Communication errors when loading big loads in BI system.
We currently are on Revision 49.
I also have referred to OSS Note 1138603.
The issue is when I am rolling up the BIA Index the rollup job is failing with RFC Communication errors.
The Global parameters within BIA are:
BATCHPARA - 2
NUMPROC - 5
PKGSIZE - 10000000
SUBPKGSIZE - 20000
We have two app servers with 52 Dialog processes and 25 Background processes.
Any help would be really appreciated.
Thanks
Dharma.

Removing references to systems and ports
Issue:
When the initial indexing is being carried out for an InfoCube to
create the BIA Index and there is more than one application server in
the system the job is failing with the http error.
Hello Everyone,
Thanks for the input, after the automatic changes was configured for concurrent requests the error is different right now.
The error message is,
"Remote communication failure with partner http://<Removed>:<removed>/indexCellTable"
Overview/Background:
When the indexing job is triggered as a background job the failure happens when the S table index is being filled.
In our system where we are trying to do the stress testing we currently have two app servers and one central instance.
When I limit the RFCGROUP in RSDDTREXADMIN table to one App server in terms of logon group the job finishes fine.
Whereas, when I do not limit the RFCGROUP and all app servers are open for access the background job finishes with the error message
Remote communication failure with partner http://<Removed>:<removed>/indexCellTable.
We have looked into the OSS Note 1102652 and our BASIS team confirmed that they were able to ping from BI App servers into BIA blades and vice versa.
We also confirmed if the local gateway was used for connectivity.
The above issue was not in other systems where we only had one server.
We currently are at Revision 49 and SP 13 in BI.
We have E5345 Clowertown blades (2 x 4) 16GB blades.
Please let us know if you need additional information.
Thanks in advance for the input.
Dharma.
Edited by: Arun Varadarajan on Apr 24, 2009 1:36 AM

How to correct socket communications error 10054: connection reset by peer

We are running Lookout 5.1 (build 8) reading data through Modbus Ethernet Drivers and we are constantly getting "socket communications error 10054: connection reset by peer" alarms on the server. When I connect to the server file with a client file the client is experiencing communications problems including locking up when editing, trends not showing up, stops updating completely (can only be corrected by restarting server file), and losing symbolic link.
Does anyone know how to stop this alarm from happening and if this could be the cause of my faulty server-client connection or is this strictly a problem between the server and the ethernet radios in the field?
Any response would be appreciated.
Thanks!
Jason
Jason Phillips

DST1,
All I had to do was increase the receive timeout in each driver's properties until the socket errors disappeared. I have them all set to 30000 msec. Communications have been great on this wireless ethernet system ever since.
Sorry for not answering sooner - needed to make time to go back and look at the file and then TS Lee came our way!
Jason Phillips

Error when transferring data; communication error when analyzing

Hi,
When I load the data from the SAP CRM source system. Iam getting the following error.
Error when transferring data; communication error when analyzing
Diagnosis
Data Packets or Info Packets are missing in BW, but there were - as far as can be seen - no processing errors in the source system. It is
therefore probable that an error arose in the data transfer.
With the analysis an attempt was made to read the ALE outbox of the source system, which lead to error .
It is possible that no connection exists to the source system.
Procedure
Check the TRFC overview in the source system.
Check the connection of the source system for errors and check the
authorizations and profiles of the remote user in both the BW and
source systems.
Check th ALE outbox of the source system for IDocs that have not been
Can anyone guide me on this.
Thanks in Advance
Varun

ok here's a development..when i logged in the source system to check the job...it says the job defn is incomplete. The description says:
Definition for job ARFC:SYSLOAD1C800CRMREMOTE is incomplete. Job cannot be released
Can anyone give an insight on it.
Any kind of input will be appreciated.
Regards
Varun

Error when connecting to terminal

Hello,
I have a BB 8100, Desktop manager 4.6.
Synchronization was working correctly 3-4 weeks ago.
Today, when I tried to synchronize, I had this error message:
0 x 80040fb3
I tried to debug this with the procedure of modifying Last name, first name, etc.... with no success
I tried several time to synchronize again but without success.
Now, the situation is even worse!
New message when I connect my BB to my computer. When I launch Desktop manager, I have the following error:
"Error when connecting to terminal. Make sure that your terminal is correctly connected, then try again"
I can not anymore try to synchronize!
This is very strange, it never happened before.
Nevertheless, Desktop Manager recognize my BB, as I can read on the buttom left part of the screen: Terminal connected (code Pin) recognized xxxxxx.
HELLLLP!
Thanks
Solved!
Go to Solution.

Hello RianaZaire,
Unfortunately, I still have the same error Message.
I have not been able to solve the situation.
I reinstall twice the software.
I tried to connect my Blackberry to my computer with a new cable.
I still have the same error message.
I don't know what to do.
Maybe somebody will read our messages, and help us!
Maybe this information has a link with my blackberry problem:
I also have a problem with an another device. (a TOMTOM GPS system), which happened almost at the same time.
Usually, when I connect this device, it will directly open the GPS sofware ( where I can download the new updating stuff). But since this Blackberry problem, I can not do it anymore. Impossible to connect the TOMTOM onto it. It is not recognize onto my computer.
For information, I also do synchronization of my adress book between my phone and TOMTOM.
HELP HELP

Error when connecting to portal from some machines

Hi all,
Can anyone help me with this.
I get this jserver error when connecting to portal from some
client machines.
I works fine from the others. Any ideas?
This is the error I get:
[08/01/2002 17:41:57:618 GMT+00:00] page/Timeout occurred,
label=73 url=http://odeceixe:81/pls/portal30/!
PORTAL30.wwpro_app_provider.execute_portlet time=15828ms
[08/01/2002 17:41:57:618 GMT+00:00] page/ContentFetcher
Unexpected Exception, name=content-fetcher5
java.io.EOFException: Premature EOF encountered
     at HTTPClient.StreamDemultiplexor.read
(StreamDemultiplexor.java, Compiled Code)
     at HTTPClient.RespInputStream.read(RespInputStream.java,
Compiled Code)
     at java.io.InputStream.read(InputStream.java:95)
     at java.io.InputStreamReader.fill
(InputStreamReader.java:163)
     at java.io.InputStreamReader.read
(InputStreamReader.java:239)
     at oracle.webdb.page.ContentFetcher.run
(ContentFetcher.java, Compiled Code)

Did you ever find the cause of this, I am receiving the same message, but as you said, only when connecting to the portal via a certain pc.

Error when connecting to MDM from different lan

Hi,
I got "Image Server Login Error" when connecting with client to server from different LAN, server is up, and i can connect to it when i in the same LAN. Ports 20003, 20004, 20005 for MDM server discovering and repository port 2345 is accessible through router. Running SP2 5.5.24.06.
Rem: it's not a port problem, when port 2345 is closed i got "WinSock error on connect"
PS: When I used MDM SP1 i connected to him properly in the same case.

Hi Dmitry,
If your repository is set to port 2345, then 4 subsequent ports should be openned also, i.e. 2346-2349.
Regards, Lev

Error When connecting proxy

Hi,
When I try to connect proxy in application, it is not connecting instead when I check whether it is going through proxy or not it is telling that it is establishing direct connection only. Here I have posted part of the coding. Please If any error give me a hint.
            System.setProperty("ProxySet", "true");
            SocketAddress addr = new InetSocketAddress("webcache.mydomain.com",80);
            proxy=new Proxy(Proxy.Type.HTTP,addr);here in this code part I am checking whether is connecting with proxy or not.
URL u = new URL(url);
URLConnection uu=u.openConnection(ScrapperInterface.proxy);
try
                URI uuu = uu.getURL().toURI();
                List l=ProxySelector.getDefault().select(uuu);
                for (Iterator iter = l.iterator(); iter.hasNext(); )
                     Proxy proxy = (Proxy) iter.next();
                     System.out.println("proxy hostname : " +proxy.type());
                     InetSocketAddress add = (InetSocketAddress)proxy.address();
                     if(add == null)
                         System.out.println("No Proxy");
                     else
                         System.out.println("proxy hostname : " +add.getHostName());
                         System.out.println("proxy port : " +add.getPort());
catch (URISyntaxException ex)
                Logger.getLogger(StartThread.class.getName()).log(Level.SEVERE, null, ex);
}Output is:
proxy hostname : DIRECT
No Proxy

Re: Error When connecting proxy You didn't get any error when you created the connection. Your title is misleading. Probably you are misleading yourself - see below.
System.setProperty("ProxySet", "true");That does nothing. There is no such property, contrary to widespread belief.
SocketAddress addr = new InetSocketAddress("webcache.mydomain.com",80);
proxy=new Proxy(Proxy.Type.HTTP,addr);... and using java.net.Proxy has nothing to do with system properties in any case.
URLConnection uu=u.openConnection(ScrapperInterface.proxy);Here you are opening a URLConnection via the proxy. As you got output from the code further down it is clear that this step must have succeeded. So all the code below is pointless.
URI uuu = uu.getURL().toURI();Here you are getting the URI you created the connection for.
List l=ProxySelector.getDefault().select(uuu);Here you are getting the Proxies the default ProxySelector would have given you for that URI. Nothing to do with the URLConnection you created, and nothing to do with the Proxy you created either.
InetSocketAddress add = (InetSocketAddress)proxy.address();So here you are testing the proxy address for the system's default proxy for that URI. Again, nothing to do with what you did above.
What you should be doing here is using the URLConnection you have already created. Not testing an address.

Error when connecting to system

Hi,
I have been off topic for quite a while and when I wanted to pick up today, I couldn't connect to the HANA server anymore. I haven't changed any settings since last setup, all I get is the "Error when connecting to system" in the Quick Lauch of the infornation modeler.
Any suggestions?
THX
Markus

Hello,
did you connect since upgrade to SP03?
You might be looking for this thread.
SAP In-Memory Developer Center - planned downtime 2011-11-15, 10-11am PST
Tomas

"no ocijdbc11 in java.library.path" error when connecting a TNS database co

Hi
"no ocijdbc11 in java.library.path" error when connecting a TNS database connection
I have the same problem 'error code' when testing the connection to a database although I have an APEX db that connects without a problem.
I have re downloaded jre & SQL Developer just to ensure all files are where they should be with no luck.
I've also tried most of the suggestions in various threads.
Does anyone know what exactly causes this error?
eg; should I be looking for a file called 'ocijdbc11' & put it into the 'java.library.path' path?
Can anyone explain to a newbie at db connections what I should do?
I'm using the 'thin' client as the checkbox is clear & I don't know what path to enter into the correct file to make this work??
This is & needs to connect as a TNS connection & was working fine until recently, the only change I can think of is a move of files from the 'C' drive but I thought redownloading SQL Developer would slove this.
Thanks

When you reinstalled SQL Developer, did you install into a new directory (ie rename or delete the old directory first)?
I don't know if system setup contains directory references (which might be invalid after moving the location of SQL Developer). Does renaming your system2.1.1.64.45 directory (in C:\Documents and Settings\username\Application Data\SQL Developer) help? Note that your connections are in the connections.xml file in the o.jdeveloper.db.connection.11.1.1.2.36.55.30 subdirectory of system2.1.1.64.45 - you will either need to export connections before renaming and then import again after or copy this file to test if you can connect.
Finally, the TNS Names directory preference is just a way of telling SQL Developer where to look for the tnsnames.ora file, rather than just assuming it will pick the right one. If you go to create a new connection, do you get the right list of TNS aliases? If not, then set this preference to the directory where the right tnsnames.ora file lives.
theFurryOne

When the system status says icloud is OK but it reports "encountered an error when connecting to the server", where do you report the problem, or how do you connect?

When the system status says icloud is OK but logon reports "encountered an error when connecting to the server", where do you report the problem, or how do you connect?

Yes i am hoping staff here will look into things, even if i can not get the speeds back what i previously had for near 6 months it would be nice to know why i can not and why the download has dropped by around 10Mb and why my upload is now inconsistant.
Ironically the post concerned got edited because i actually posted the full rather silly reply the Indian call centre made babbling on about down rates rather than the uprate i queried with them.
Bit of a shambles really no real way on BTs web site to contact anyone with regards to broadband issues.
The form which you kindly suggested and i appreciated your help ended up in the hands of someone who either did not bother to read the query or just had such a poor grasp of English they did not understand the query.
Pretty pathetic really when BT are the largest telco in the UK. I think ill be taking my broadband business elsewhere regardless at the end of my 18 month contract, while im sure staff here are wonderful and may even yet help me, i do not particularly want to go through the almost like pulling teeth pain of getting any future issue looked at.
They are great at quickly fixing voice line problems and have a great test on their site. Broadband side of things and support for that though seems a shambles.

URGENT - INTERNAL SERVER ERROR when connecting to site

i'm getting INTERNAL SERVER ERROR when connecting to site. everything was ok till yesterday night but since today morning, nobody has been able to log in the site.
i looked at the Apache Listener log files in IAS_HOME/Apache/Apache/logs
the error_log file contained the following :-
[Fri Jan 26 08:32:04 2001] [error] [client 127.0.0.1] Invalid method in request ^A
[Fri Jan 26 08:32:05 2001] [error] [client 10.32.12.219] malformed header from script. Bad header=<!DOCTYPE HTML PUBLIC "-//IETF: /servlet/p
age
[Fri Jan 26 08:32:58 2001] [error] [client 127.0.0.1] Invalid method in request ^A
[Fri Jan 26 08:32:58 2001] [error] [client 10.32.12.219] malformed header from script. Bad header=<!DOCTYPE HTML PUBLIC "-//IETF: /servlet/I
sItWorking
[Fri Jan 26 08:33:13 2001] [error] [client 127.0.0.1] Invalid method in request ^A
[Fri Jan 26 08:33:13 2001] [error] [client 10.32.12.219] malformed header from script. Bad header=<!DOCTYPE HTML PUBLIC "-//IETF: /servlet/page
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
then i tried to kill all the httpd processes and restart the apache and the error log was populated with the following :-
[Fri Jan 26 09:35:48 2001] [warn] child process 16269 still did not exit, sending a SIGTERM
[Fri Jan 26 09:35:49 2001] [warn] child process 16270 still did not exit, sending a SIGTERM
[Fri Jan 26 09:35:49 2001] [warn] child process 16271 still did not exit, sending a SIGTERM
[Fri Jan 26 09:35:49 2001] [warn] child process 16272 still did not exit, sending a SIGTERM
[Fri Jan 26 09:35:49 2001] [warn] child process 16273 still did not exit, sending a SIGTERM
[Fri Jan 26 09:35:49 2001] [warn] child process 16274 still did not exit, sending a SIGTERM
[Fri Jan 26 09:35:49 2001] [warn] child process 16275 still did not exit, sending a SIGTERM
[Fri Jan 26 09:35:49 2001] [warn] child process 16276 still did not exit, sending a SIGTERM
[Fri Jan 26 09:35:49 2001] [warn] child process 16277 still did not exit, sending a SIGTERM
,same messages continue for different
,process ids followed by
Assertion failed: wwwctx->alloctotal == 0, file wwcepl.c, line 559
Assertion failed: wwwctx->alloctotal == 0, file wwcepl.c, line 559
Assertion failed: wwwctx->alloctotal == 0, file wwcepl.c, line 559
Attempt to free unreferenced scalar.
Attempt to free unreferenced scalar.
Assertion failed: wwwctx->alloctotal == 0, file wwcepl.c, line 559
Assertion failed: wwwctx->alloctotal == 0, file wwcepl.c, line 559
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
[Fri Jan 26 09:35:53 2001] [error] child process 16269 still did not exit, sending a SIGKILL
[Fri Jan 26 09:35:53 2001] [error] child process 16270 still did not exit, sending a SIGKILL
[Fri Jan 26 09:35:53 2001] [error] child process 16271 still did not exit, sending a SIGKILL
[Fri Jan 26 09:35:53 2001] [error] child process 16272 still did not exit, sending a SIGKILL
[Fri Jan 26 09:35:54 2001] [error] could not make child process 16269 exit, attempting to continue anyway
[Fri Jan 26 09:35:54 2001] [error] could not make child process 16270 exit, attempting to continue anyway
[Fri Jan 26 09:35:54 2001] [error] could not make child process 16271 exit, attempting to continue anyway
[Fri Jan 26 09:35:54 2001] [error] could not make child process 16272 exit, attempting to continue anyway
[Fri Jan 26 09:35:54 2001] [error] could not make child process 16273 exit, attempting to continue anyway
[Fri Jan 26 09:35:54 2001] [error] could not make child process 16274 exit, attempting to continue anyway
[Fri Jan 26 09:35:54 2001] [notice] caught SIGTERM, shutting down
[Fri Jan 26 09:38:10 2001] [notice] Apache/1.3.12 (Unix) ApacheJServ/1.1 mod_perl/1.22 configured -- resuming normal operations
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
[Fri Jan 26 09:38:44 2001] [error] [client 127.0.0.1] Invalid method in request ^A
[Fri Jan 26 09:38:44 2001] [error] [client 10.32.1.81] malformed header from script. Bad header=<!DOCTYPE HTML PUBLIC "-//IETF: /servlet/pag
e
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
[Fri Jan 26 09:39:06 2001] [notice] caught SIGTERM, shutting down
[Fri Jan 26 09:39:30 2001] [notice] Apache/1.3.12 (Unix) ApacheJServ/1.1 mod_perl/1.22 configured -- resuming normal operations
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
[Fri Jan 26 09:42:17 2001] [error] [client 127.0.0.1] Invalid method in request ^A
[Fri Jan 26 09:42:17 2001] [error] [client 10.32.1.81] malformed header from script. Bad header=<!DOCTYPE HTML PUBLIC "-//IETF: /servlet/pag
e
Any ideas or suggestions anyone ....??
what could have possibly changed since yesterday to effect the site ??
any help would be greatly appreciated ...
null

A couple of questions:
1) Did you try shutting down apache with the sript?
2) When killing the httpd processes did you also kill the associated java processes?
null

Communications error when connection my camcorder

Similar Messages

Maybe you are looking for