Communications errors during activation of Microsoft Office 2007

I get an communication error. when i try to activate the new install off office 2007. I have tried to re install. same result.
It tries to communicate with Microsoft. But stops. And then post an error saying that
there is an communications error. try again in 2 min.
I don't have any problems with my internet. I tryed to fix the key problem. but same result.  
The computer is an lenovo g50-45 with windows 8,1
Help

Kindly go through the following KB Article:
When you try to activate Office programs over the Internet, you receive an error message
S.Sengupta, Windows Entertainment and Connected Home MVP

Similar Messages

  • Activation of Microsoft Office 2007

    I purchased a Satellite P505 and cannot activate the preinstalled Microsoft Office 2007, the product key provided does not work. Any suggestions?

    Which Satellite P505, Federico?
    Which Windows?
    The STOP code error in the blue screen is: STOP: 0x0000001E (0x0000000000000000, 0x0000000000000000, 0x0000000000000000, 0x0000000000000000)
    This is for that one..
    Bug Check 0x1E: KMODE_EXCEPTION_NOT_HANDLED
    Always check for a file name on the blue screen. Sometimes it tells us which driver causes the trouble.
    But the file you attached was for a different blue-screen error, which occurred on 8/26/2010 at 12:53:23 PM and was this..
    Bug Check 0x50: PAGE_FAULT_IN_NONPAGED_AREA
    Unfortunately, the file it mentions is a core system file. See below.
    ==================================================
    Dump File         : 082410-40357-01.dmp
    Crash Time        : 8/26/2010 12:53:23 PM
    Bug Check String  : PAGE_FAULT_IN_NONPAGED_AREA
    Bug Check Code    : 0x00000050
    Parameter 1       : fffffa91`45e0a150
    Parameter 2       : 00000000`00000001
    Parameter 3       : fffff800`02a7ef05
    Parameter 4       : 00000000`00000005
    Caused By Driver  : ntoskrnl.exe
    Caused By Address : ntoskrnl.exe+70740
    File Description  :
    Product Name      :
    Company           :
    File Version      :
    Processor         : x64
    Computer Name     :
    Full Path         : C:\Test\082410-40357-01.dmp
    Processors Count  : 2
    Major Version     : 15
    Minor Version     : 7600
    ==================================================
    -Jerry

  • Wish to fix an error code after upgrading Microsoft Office 2007

    I just recently upgraded to MS Office 2007, but every time I launch Microsoft Outlook, I get this error code: The Add-in "ACT! Extensions" (C:\WINDOWS\system32\Act9Ext.dll) cannot be loaded and has been disabled by Outlook. Then goes on to advise me to contact the Add-in manufacturer for an update or uninstall the add-in.
    I no longer have that specific version of ACT on my computer, but obviously I still have that extension and I am unable to find it.
    I will appreciate if someone is able to help me to correct this error.
    Thank you, 
    Solved!
    Go to Solution.

    I googled your error and this is what came up.
    http://help.lockergnome.com/office/remove-referenc​e-Outlook-Add-ftopict996422.html
    and
    http://help.wugnet.com/office/Add-error-ftopict106​3593.html
    Message Edited by CSX on 11-22-2008 02:05 PM
    Ignorance is no excuse!

  • Microsoft Office 2007

    If i installed Microsoft Office 2007 on my old laptop and just got a new laptop,
    is there any way that I can take it off of my old laptop and put it on the new one?
    Solved!
    Go to Solution.

    Keep in mind that once Microsoft Office has be activated on 1 PC, you will be unable to activate it another PC unless you purchased the 3 user Home & Student Edition.
    Adam
    Best Buy Community - Retail, Americas
    Forum Guidelines | Terms & Conditions | Community Guidelines | Blogging Guidelines
    *Remember to mark your questions solved and click the star under the user's name to show your thanks!

  • Installation of Microsoft Office 2007

    I had microsoft office professional plus 2007. But suddenly it has stopped working. I have tried uninstalling it through control panel but unable to do that with the message that "This product installation is corrupted. Run set up again from the CD,
    DVD or other original installation source." But then when I was trying to run the set up , after the completion of the installation  progress window nothing is coming. I waited for more then 2 hours, but nothing happened, even the computer was not
    showing any error message. So I had to stop the installation. I have then tried to uninstall it with the microsoft fix it tool. But my computer is not letting me to install microsoft fix it tool, with the error message that "another installation in progress.
    You must complete that installation before this one." I have restarted my machine and tried installing the microsoft fix it tool, but still it is showing the same error message.  Since I was not able to install microsoft office 2007, I have tried
    to install microsoft office 2003, but even then my machine is not letting me to install it, with the error message that " error 1500: another installation in progress. You must complete that installation before this one." I have opened the task manager
    to see whether any other program is running or not and it shows only office 2003 is running that I was trying to install. I did not able to figure out  which program is installing. I really need to install office as soon as possible and my research work
    is not progressing because of that. Please help me on this.

    Hello,
    The TechNet Wiki Forum is a place for the TechNet Wiki Community to engage, question, organize, debate, help, influence and foster the TechNet Wiki content, platform and Community.
    Please note that this forum exists to discuss TechNet Wiki as a technology/application.
    As it's off-topic here, I am moving the question to the
    Where is the forum for... forum.
    Karl
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
    My Blog: Unlock PowerShell
    My Book:
    Windows PowerShell 2.0 Bible
    My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

  • Mac Office and Microsoft Office 2007

    How do you open the Microsoft Office 2007 .docx in Office 2004 for Mac (Professional edition)?

    Has anyone else had any similar problems?
    Apparently the converter is really bad! MacFixit published this article on their own experiences:
    OOXML Word 2007 converter (#3): Failure and mild success
    Last week reported on the release of and misfortune with a newly released Mac OS X-compatible drag-and-drop OOXML converter (which can convert Word 2007 for Windows and Word 2008 for Mac OS X [when released]) documents to RTF (rich-text-format) documents, readable by Word 2004, Word v.X and other applications.
    Our experience to the converter was poor, with a relatively simple Word 2007 document failing to convert at all with the error messages "There was an error opening the file. Conversion Failed."
    Reader experience was somewhat mixed, with some reporting mild success but most sharing in our dismay.
    Fails to convert at all One camp of users -- like our in-house trial -- is unable to convert files at all, receiving only error messages.
    One user writes:
    "Sadly for me, this doesn't seem to work at all on my computer. I get an error message every time I try to convert a file."
    Converts some files Another group of users has success with some files but not others.
    A reader writes:
    "I tried it with a couple of different word .docx files and it worked on 3 out 8; not the best result, but then it's only a beta so perhaps it will get better in the future."
    Success, or something like it Finally, some users had success converting files, though in nearly every case, there was some flaw apparent in the resultant file.
    MacFixIt reader Neal Pann writes:
    "I had recently received a docx file via email (in Mail) and saved that file to the desktop. After dragging and dropping the file on the converter, it quickly converted the file and everything looked exactly like the original with the exception that one of the graphics didn't convert. A 'block' taking up the same space of the graphic was there, just no graphic. I believe that is something that is noted in the notes that some graphics might not convert correctly."
    MacFixIt reader Marcus adds:
    "Install went smoothly on a MacBook Core Duo, 1G RAM, 10.4.9. Tested using a '.docx' document emailed from a 'Windows friend.' Document was very small and contained only one paragraph of less than 200 words. Worked whether double-clicking on document or dragging into OOXML window."
    Alternatives Note that there are a number of alternatives to the official Microsoft Word 2007 converter that might provide better results for some documents. These include:
    docXconverter
    manual extraction
    the built-in translators offered by NeoOffice

  • Microsoft Office 2007 compatibility with SAP Business One 2005B

    Hi Everyone,
    I want to know that is Office 2007 completely compatible with SAP business One 2005B. I am using SAP Business One SP 00 with Patch Level 32.
    Please also let me now whether XL Reporter is compatible with Office 2007 as when I installed Office 2007 and trying to install the XL Reporter Add-on during the installation it is showing that Microsoft Excel not found but in my PC excel 2007 is already present.
    Kindly help me in this regard.

    Hello,
    Based on this link:
    https://websmp210.sap-ag.de/smb/sbo/platforms
    that I copied for you:
    Desktop System Platforms      addon 2005 SP1 2005 B      2007 A
    Microsoft® Office 2000 SP3
    - Standard & Professional
    Edition                                                      
    Microsoft® Office XP SP2
    - Professional Edition                                           X               X
    Microsoft® Office 2003 SP1
    - Standard & Professional Edition                          X                  X
    Microsoft® Office 2007
    - Standard & Professional Edition             X(1)      X               X (2)
    (1) XL Reporter 2005 does support Microsoft® Office 2007 as of XL Reporter 2005 SP01 PL29.
    (2) XL Reporter 2007 currently does not support Microsoft® Office 2007. Planned to be supported in Q3/2007.
    x sign means it is okay with the version. The version is in the header/top. You can understand and have solution for your problem after read it.
    Rgds,

  • Where is form of Microsoft Office 2007?

    http://social.msdn.microsoft.com/Forums/en-US/6e3406a3-94eb-4531-b35e-ec28a0ddfeaa/where-is-form-of-microsoft-office-2007?forum=vsto
    Please reply...
    Thank you :)

    Hi,
    I have read the thread, please see Luna's explain about your issue. As Luna said, if you want to get the interfaces of Ribbon objects, Microsoft Office did not provide it.
    Then, here is a forum to discuss questions and feedback for Microsoft Excel(not a develop forum), your question is more related to develop, I suggest we stay in MSDN forum, there maybe
    other familiar
    communicators can shed some light on it or provide a workaround.
    Thanks for your understanding.
    George Zhao
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • If i download any file which is prepare on microsoft office 2007 . The file have been download without extension of the prog. Means if files name is "1,docx" when i download from firefox it download in that form "1". after download i have to rename and gi

    If i download any file which is prepare on microsoft office 2007 . The file have been download without extension of the prog. Means if files name is "1,docx" when i download from firefox it download in that form "1". after download i have to rename and give the extension name is plz tell me the way that office files are compatible with it.
    == This happened ==
    Every time Firefox opened
    == when i download the office files

    In Firefox Options / Privacy be sure "Remember download history" is checked. To see all of the options on that panel, "Firefox will" must be set to "Use custom settings for history".
    To find your OS information, on your Windows desktop, right-click the My Computer icon, choose Properties, under System on that small window is info about your OS.
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

  • My iPhoto won't open keeps on giving me an error message and my microsoft office two

    my iPhoto won't open keeps on giving me an error message and my microsoft office two

    There are 9 different versions of iPhoto and they run on seven different versions of the Operating System. The tricks and tips for dealing with issues vary from version to version and OS to OS. So before anyone can help, they need information to work with. Basic stuff:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. What were you doing when the problem arose?
    - Did it ever work properly?
    - Are there error messages?
    - What steps have you tried already to solve the issue.
    Anything else you can think of that might allow someone else to understand your issue.
    With this kind of information somebody can develop a starting point for troubleshooting the issue.
    Posts that consist of "iPhoto doesn't work. Help" or "iPhoto won't print" or "Suddenly I have no photos!!!!!!!!!!" mean that any helper is simply guessing. More information means you get better assistance. (And no, more exclamation marks do not get help faster or make your issue seem urgent. They just make it seem like you have a stuck key )

  • New Mac User Needs help opening Microsoft office 2007 files on a Mac!!!

    I just got a used ibook G4. I had an old Pentium upgrade IBM before. I love my Mac, but I need my old school files form my IBM. I have OpenOffice.org 2.2 for Mac OS X 10.4.11 and I have a file converter program called X 11 that opens with a huge list of options for converting files, but it dose not say Microsoft offices 2007 it says the version numbers. I tryed the latest version and It wouldn't open in OpenOffice.org. Should I use Apple Script instead? I don't have Apple Works do I need it? I just want to look at the files. Why is there not a office viewer for Mac?

    You have Tiger. Tiger=10.4.x; Panther=10.3.x; Leopard=10.5.x.
    If you are trying with OpenOffice 2.2, it might be worth updating. I have version 2.4, which is the latest. Since 2.4 fixes a security issue, you should update if you plan to use the application anyway.
    NeoOffice, as a previous poster pointed out, should be able to open Office 2007 documents.
    See the discussion at http://user.services.openoffice.org/en/forum/viewtopic.php?f=5&t=4542 for the main OpenOffice thread discussing this issue. It discusses the ODF converter at sourceforge which NeoOffice uses to open Office 2007 documents. Apparently, you can use it with regular OpenOffice, too, but if 2.4 doesn't come with it (and maybe it does - I haven't checked), it might be easier to use NeoOffice for now.
    X11 is not a file converter, by the way. It is the traditional unix GUI. Apple provides a version of this for OS X which enables you to run applications which haven't been ported to the native OS X environment. OpenOffice for Mac OS X uses X11 as do some other applications, such as GIMP, which you may have heard of/used. NeoOffice is a version of OpenOffice ported to the native OS X environment (i.e. it doesn't have to use X11). I haven't used it in a long time - I always use OpenOffice on X11 - but it is supposed to be very good now and should seem very familiar if you're used to OpenOffice. If you can't get OpenOffice to work with your files, you should definitely try NeoOffice before buying MS Office - unless, of course, you especially want to send MS a few hundred of your preferred currency.
    The other thing you can try, if you've still got Office on your IBM machine is converting the files there by opening them and choosing "save as...". That should allow you to select an earlier version of Word/Excel/... which OpenOffice should have fewer problems with. Since you may lose formatting this way, try the other options first. (Also, if you have a lot of files, this option will be very annoying to implement.)
    I do not think AppleWorks is likely to help. (I'm not sure if AppleWorks is even still available... somebody?) There are some suggestions Pages might help, but I would personally try the other solutions first. (On the other hand, I have a very old version of Pages.)
    AppleScript is almost certainly not what you want. It has nothing to do with AppleWorks. It is a scripting language.
    Good luck,
    cfr

  • Error During Activation of Web services

    When I try to create a web services using RFC and try to complete the steps in the wizard. I am getting error message as "Error during Activation of web services". and also when configure service in wizard, im getting only two profiles as "Basic Authorization: SOAP PROFILE" and "Secure SOAP PROFILE". Kindly do the needful.
    Moderator message: please do more research before asking, show what you have done yourself when asking.
    Edited by: Thomas Zloch on Aug 8, 2011 1:33 PM

    Olivier, thank you so much
    SOAMANAGER does not exist in my system (sp level 8), so node "/sap/bc/soap/rfc" should be active. Actually, it is active.
    I think the problem is related to user rights/profiles.
    I have tried to create another WS after assigning role SAP_BC_WEBSERVICE_ADMIN. The same error when trying to activate it, but now, I can see this WS in SE80 (under "Enterprise Services->Service Definition"). It is not active there and if I try to activate it, a success message appears indicating that user "is not authorized to use function netzwerkadministration". I cannot see any new services in SICF...
    Probably the new entry in SICF will be created after activating WS in SE80...
    Do u know what user profile should I add in order to properly activate the WS in SE80?
    Thank you very much!
    Vicente

  • Error during activation of ExternalWebServiceIntegration

    Hi All,
    Has anyone got the following error during activation of ExternalWebServiceIntegration?
    I am trying to create an ExternalWebServiceIntegration for a SOAP based ERP web service. I am able to create the ExternalWebServiceIntegration using the required WSDL file. But when I try to activate it, I get this error message.
    Any idea on what could be causing this?
    Thanks,
    Sanat

    Did you perform a "Check" and see if something's thrown at Output window?
    If you don't have enough info to debug, then I suggest you raise an incident.

  • Error during activation of ODS data

    Hi all,
    I am getting error during activation of ODS data.
    Error: Error occur during activation.
    How to check , where that error exactly occurs.
    Appreciating any response.

    Hi Santosh,
    SM37 is mainly for monitoring the back ground jobs...... both in R/3 side and BW side this is same.. just for monitoring the background jobs... fisrt by using SM36 basis people will schedule in background.. and we just identify.. which are completed and which are not completed... in SM37.
    there are various status they are
    PLANNED
    RELEASED
    CANCELLED
    ACTIVE
    FINISHED
    READY
    Check this link
    http://help.sap.com/saphelp_nw04/helpdata/en/c4/3a8016505211d189550000e829fbbd/frameset.htm
    In Sm37 u can see the different options for background jobs, like Scheduled, released, ready,active, finished, canceled.. If u want to know the Status of the current running job, U just type the job name, user name then click execute(F8).
    hope this helps
    regards
    Karthik
    Assign points if helpful

  • Error during activation a message mapping

    Hi,
    I get this error during activation a message mapping:
    source code has an syntax error:
    D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Mapf1f9db20a78a11dac004000f1ff80130/source/com/sap/xi/tf/_Source2Target_.java:2: package com.sap.aii.mappingtool.tfapi does not exist import com.sap.aii.mapping.api.; import com.sap.aii.mappingtool.tfapi.; ^ 1 error
    Can anybody help me please??
    Thanks.
    Regards
    Stefan

    Hi Michal,
    I do not have deleted some libraries in the XI-Installation.
    I have some customer functions in other mappings but no message mapping without or with customer function can I activate, now.
    The mappings are in serveral software components but it is no chance to activate a message mapping.
    Regards,
    Stefan

Maybe you are looking for