Communigate Pro corrupting file system

I am running CGP 5.0.13 on an Intel XServe 10.4.8 and XRaid
I have replaced the XServe and XRaid 3 times with new systems out of the box. But, everytime the file system gets corrupted and the server panics.
Does any body have any ideas.
Any help would be greatly appreciated.
Sam Carvalho
[email protected]
xserve g5 Mac OS X (10.4.5) g5 tower
xserve g5 Mac OS X (10.4.5) g5 tower
xserve g5 Mac OS X (10.4.5) g5 tower
xserve g5 Mac OS X (10.4.5) g5 tower
xserve g5 Mac OS X (10.4.5) g5 tower

I'm just surprise you say this used to work at all. You should never copy a file INTO another bootable disk, as it immediately messes up the permissions on that disk.
Sharing is fine for accessing files on another mac and copying files FROM that machine back on to the machine you're currently booted into. If you want to send a file to the other machine (the one you're not booted into) you should boot into that machine first, and then copy it FROM the first machine.
The other way to do it is to set up a shared Dropbox folder on each machine and place your files in there, which will update the files on the other machine when you boot into it.
Anything else is going to keep giving you permissions problems, I'm afraid.

Similar Messages

Help! Corrupted file system....

Hi all,
One of the partitions on my external hard drive (Mac OS Extended Journaled) has a corrupted file system. This occurred right after I installed the latest NTFS-3G driver, which allows read/write of NTFS drives (http://macntfs-3g.blogspot.com/). The external HD was accessed via my Airport Extreme (so it was an "Air Drive"). When I connected it directly to my MBP and used Disk Utility to Verify/Repair, I got the following error messages:
*Invalid node structure*
*Invalid B-tree node size*
*Volume check failed.*
*Error: Filesystem verify or repair failed.*
What is going on here and how can I fix it??? I should note that I've already uninstalled NTFS-3G but the problem persists. Also, it's not a physical problem with external HD, since the other two partitions on the disk appear fine.
Any help would be much appreciated!

It would have to have been a pretty big coincidence since it happened immediately afterward...but you're right, I have no way of knowing for sure. I've never had a hard drive do this; I've been a windows user until about a year ago. I thought the HFS+ file system was supposed to be better...Ironically, the good old FAT32 partition on the same drive is still going strong.
Disk Warrior is a $99 purchase. Does anyone have any other suggestions for me to try before I plunk down the cash? BTW, Drive Genius 2 and also failed to repair it.

Recurrent corrupt file system of internal hard disc

Hi,
on my MacBook Pro Late 08 I get some file system corruption over and over again. Normaly I would guess having a defect hard disc but I have already tried three different discs. The problem always comes back.
I recognize the corruption by having multiple crashes of several applications (Firefox, iPhoto, iWorks, ....) having some exception type of EXCBADACCESS. This type seams to indicated that something cannot be read correctly anymore. After repairing the disk everything works fine again.
Is it normal that MacOS filesystem is not that stable and gets corrupt from time to time? I cannot find out any reproduction pattern so far.

I have exchanged the original disc to a larger 500GB/7200 2 month after getting the new MacBook. To narrow down the problem I switched to a 500GB/5400 another 6 month later. I always moved with a SuperDuper Backup from disk to another. My disc usage is about 90%.
I tent do believe it has something to do with the power management of the Mac. Between a healthy file system and a corrupt one is always one or more system sleeps.
But the output of the disk utility is also weird. Three successive runs state at the end:
1)
Invalid node structure
The volume MacBookPro internal could not be verified completely.
Error: This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk.
2)
The volume MacBookPro internal was found corrupt and needs to be repaired.
Error: This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk.
3)
The volume MacBookPro internal appears to be OK.

IMac repeatedly corrupting file system.

Right. This is a REAL head-stractcher I've got on my hands.
I've got a white intel iMac that killed a hard-drive. Replaced that with a new WD disk. Then updated to 10.6.6 (EDIT: this is a known issue with some machines...), that ruined the file system. Did a clean install & updated to 10.6.5, restored user files & clean installed apps. This worked well for a few weeks.
Now... here's the real bugger...
It has gone down again. Similar to what 10.6.6 did. fsck reports 'invalid node structure'. Nothing can repair it, Disk Utility, Tech Tool, Diskwarrior. All failed.
Not a file-recovery issue, I have a TM backup.
TechTool 5 tells me that RAM & HD are fine (extended tests) same with Hardware Test on OSX disk.
I CANNOT FOR THE LIFE OF ME figure out what is going on here. Nothing out of the ordinary happens. Shut it down, come back to it the next day: boots, Apple logo, spinning progress indicator, powers off.
Verbose / single-user show 'invalid node structure'.
My last resort is that it could be the death of the machine: maybe the processor is handing off corrupt commands = ruining the file structure?
Basically, I just don't know. It seems fine for a while, then dies suddenly & mysteriously.
HELP?!
Message was edited by: TAGIT

Addendum to my last post (I was in somewhat of a hurry):
If you will take a look at this:
http://www.alsoft.com/diskwarrior/details.html
The last time I ran it on my current iMac, the directory was 36% out of order. That appears strange - I have a 1 TB hard disk and so far, only about 100 GB data on it. So, my non-techie take on it is that it will simply write all over the place - wherever there is room - and that is how you wind up with messed up directories. My suggestion is that if you use your machine heavily to run it occasionally.
Note that 1) you cannot run it from the boot disk and 2) the current version of DW is unable to boot the new iMacs. Since booting from the DW disk is a pain anyway, the simple solution is to install it on your internal and then create a bootable clone of your system (which will obviously include DW) on an external. Then, when you want to run it, simply boot from the external, run it and when done, choose to restart from your internal. Done and all is well with your hard disk.

Logic Pro Corrupt Files? Begging for Help!

Hello all,
I am having a real problem here. Every new file I create in logic pro eventually turns corrupt, including the backup projects automatically generated in the project folder. When I go to open the project file I've been working on, a prompt pops up either saying that the file is unreadable, damaged, unrecognized or even sometimes it says my audio files are in an unreadable 8 bit format () So it seems to be corrupting the audio files as well... Some serious problem is going on. I am running all latest versions of all my software and hardware. Leopard 10.5.5, Logic 8.02 and my MOTU Interface has the latest firmware.
I have tried dumping my preferences in the library, and I even did a full reinstall of Logic, and the problem continues. Is it a hardrive issue? I have verified and repaired disk permissions several times with no problems. I tried to call phone support and was surprised to be treated indifferently and would not be helped unless I consented to an expensive user agreement. I thought my $3,000 computer and $500 software purchase would be adequate enough. I guess not.
Sorry for the rant, this has been most troubling seeing as I have lost a project due to this crazy glitch. So I turn to you, online community! Am I alone is this problem? From online investigation it seems no one has had much of a problem with this. Does anyone have advice for me? Anything will be GREATLY appreciated!!!!!!
BTW, DP projects and Garageband projects seem unaffected, which makes me wonder if it's a Logic Pro issue after all. Oh and I'm running the same Logic Pro software on an older Powerbook G4 w/ Tiger and everything runs fine.

dsermon wrote:
As far as other hardware, it's only the ultralite and a oxygen 61 keyboard
Yes these corrupt files work ok on G4 unless the audio has already been corrupted by my macbook pro
*I will definitely try out all of your suggestions* and see where it leads me. I'm glad other people are experiencing this problem. Well, not glad, but you know what I mean... Just thought I was going crazy.
Elith- does your exported audio come back as garbled audio sometimes? Mine either make a TERRIBLE hiss, garbled, or are not readable at all. Really sad stuff....
Are you connected to the internet via wireless or ethernet cable?
If so disable and see if it makes a difference.
pancenter

Time Machine corrupting file system

I've been using Time Machine on an external hard drive for a long time with success. Recently the volume got corrupted and I could not repair it from disk utility. After formatting the drive I did backups for a few more days and it happened again. I used diagnostic tools from the disk manufacturer and they did not indicate any physical failure in the equipment.
Has anyone had a similar experience?
Thanks in advance!

That misbehavior is typical of a failing disk, diagnostics or not. Replace it.

RAC using templates /u01 corrupt file system

Hi,
newbie to the forum - please be gentle ;o)
Trying to install RAC using virtualbox and templated. Get to the point of just before first boot interview when vnc'd into the virtual machines. But the boot fails with a corrupt /u01. ANyone had corrupt /u01 before ? How to stop it happening ? I tried to continue by using "fsck -a" but it would not allow automatic fix. So I tried manually going through each error ( but there are thousands ). Also tried taking /u01 out of fstab to get first interview. But then the installed failed after doing buildcluster.sh due to same issue ( corrupt /u01 ).
Have tried creating new VMs - always getting corrupt /u01.
Any thoughts / ideas welcome.
Thanks.

Arf,
I am new to RAC. I analyzed Alejandro's script. He is main connection is to the first instance; then through sql*plus, he gets connected to the second instance. he exits the second instance and starts with RMAN backup to the database . Therefore the backup to the database is done from the first instance.
I do not see where he setenv again to change to the second instance to run RMAN to backup the second instance. It looks to me that the backup is only done to the first instance, but not to the second instance. I may be wrong, but I do not see the second instance backup.
Kindly, I request your assistance on the steps/connection to backup the second instance. Thank you so much!! Terry

Memory Management, Crit Structure Corrupt, Bad Pool Caller, ntfs file system error

So after freshly installing Win 8.1 I was happy, untill I started to play some games that I previously played on Win 7, I've started to get a whole heap of errors, I did have more written down but have lost the bit of paper they were written on.
Here are the list of errors I can remember.
Memory Management, Crit Structure Corrupt, Bad Pool Caller, ntfs file system error
Specs:
Operating System
Windows 8.1 Pro 64-bit
CPU
AMD Athlon II X2 250
35 °C
Regor 45nm Technology
RAM
6.00GB Dual-Channel DDR2 @ 400MHz (5-5-5-18)
Motherboard
ASUSTeK Computer INC. M3N-H/HDMI (Socket AM2 )
40 °C
Graphics
SyncMaster (1440x900@60Hz)
SAMSUNG (1440x900@60Hz)
ATI Radeon HD 4800 Series (Microsoft Corporation - WDDM v1.1) (Sapphire/PCPartner)
Storage
698GB Western Digital WDC WD7500AAKS-00RBA0 ATA Device (SATA)

Adam
These are Related to
atikmdag.sys ATI Radeon Kernel Mode Driver. Yours is 2+ years old. I would update to the newest driver available.
Microsoft (R) Windows Debugger Version 6.3.9600.16384 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Ken\Desktop\A040614-65203-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*H:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*H:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9600 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9600.16384.amd64fre.winblue_rtm.130821-1623
Machine Name:
Kernel base = 0xfffff803`be013000 PsLoadedModuleList = 0xfffff803`be2da9b0
Debug session time: Mon Apr 7 00:35:03.785 2014 (UTC - 4:00)
System Uptime: 0 days 0:08:48.334
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck 3B, {c0000005, fffff80001cf7d73, ffffd0002305c470, 0}
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
Probably caused by : atikmdag.sys ( atikmdag+70d73 )
Followup: MachineOwner
0: kd> !analyze -v
* Bugcheck Analysis *
SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff80001cf7d73, Address of the instruction which caused the bugcheck
Arg3: ffffd0002305c470, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.
Debugging Details:
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
FAULTING_IP:
atikmdag+70d73
fffff800`01cf7d73 8a040a mov al,byte ptr [rdx+rcx]
CONTEXT: ffffd0002305c470 -- (.cxr 0xffffd0002305c470;r)
rax=0000000000000000 rbx=ffffcf80021783a0 rcx=ffffcf8002334ff5
rdx=0000307ffdccb010 rsi=ffffcf8004734470 rdi=ffffcf80021783a0
rip=fffff80001cf7d73 rsp=ffffd0002305cea8 rbp=ffffd0002305cf00
r8=0000000000000006 r9=0000000000000000 r10=0000000000000384
r11=ffffcf8002334ff0 r12=0000000000000001 r13=ffffcf8004734470
r14=0000000000000000 r15=ffffcf8004734470
iopl=0 nv up ei ng nz na po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010286
atikmdag+0x70d73:
fffff800`01cf7d73 8a040a mov al,byte ptr [rdx+rcx] ds:002b:00000000`00000005=??
Last set context:
rax=0000000000000000 rbx=ffffcf80021783a0 rcx=ffffcf8002334ff5
rdx=0000307ffdccb010 rsi=ffffcf8004734470 rdi=ffffcf80021783a0
rip=fffff80001cf7d73 rsp=ffffd0002305cea8 rbp=ffffd0002305cf00
r8=0000000000000006 r9=0000000000000000 r10=0000000000000384
r11=ffffcf8002334ff0 r12=0000000000000001 r13=ffffcf8004734470
r14=0000000000000000 r15=ffffcf8004734470
iopl=0 nv up ei ng nz na po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010286
atikmdag+0x70d73:
fffff800`01cf7d73 8a040a mov al,byte ptr [rdx+rcx] ds:002b:00000000`00000005=??
Resetting default scope
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP
BUGCHECK_STR: 0x3B
PROCESS_NAME: csrss.exe
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre
LAST_CONTROL_TRANSFER: from fffff800025cf3d7 to fffff80001cf7d73
STACK_TEXT:
ffffd000`2305cea8 fffff800`025cf3d7 : ffffcf80`04734470 ffffcf80`04734470 00000000`00000000 ffffcf80`01f52450 : atikmdag+0x70d73
ffffd000`2305ceb0 ffffcf80`04734470 : ffffcf80`04734470 00000000`00000000 ffffcf80`01f52450 ffffd000`2305cf00 : atikmdag+0x9483d7
ffffd000`2305ceb8 ffffcf80`04734470 : 00000000`00000000 ffffcf80`01f52450 ffffd000`2305cf00 fffff800`025f48d3 : 0xffffcf80`04734470
ffffd000`2305cec0 00000000`00000000 : ffffcf80`01f52450 ffffd000`2305cf00 fffff800`025f48d3 ffffcf80`04734470 : 0xffffcf80`04734470
FOLLOWUP_IP:
atikmdag+70d73
fffff800`01cf7d73 8a040a mov al,byte ptr [rdx+rcx]
SYMBOL_STACK_INDEX: 0
SYMBOL_NAME: atikmdag+70d73
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: atikmdag
IMAGE_NAME: atikmdag.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 4fdf9bbd
STACK_COMMAND: .cxr 0xffffd0002305c470 ; kb
FAILURE_BUCKET_ID: 0x3B_VRF_atikmdag+70d73
BUCKET_ID: 0x3B_VRF_atikmdag+70d73
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:0x3b_vrf_atikmdag+70d73
FAILURE_ID_HASH: {1ec4cdaf-008d-03dd-4ca9-ade1993441da}
Followup: MachineOwner
Wanikiya and Dyami--Team Zigzag

Sparsebundle corrupt- Unknown File System

I'm trying to restore from backup using Time Machine. I'm getting an error that either my password is incorrect or the file is corrupt. Pretty sure about the password, so...
I dragged the Sparsebundle into Disk Repair and hit Verify. I got "Verify Failed, Unknown File System".
It there a way to fix this??
Thanks for comments

Not as far as I am aware. If the image mounts but cannot be repaired I suppose you could try using recovery software but it would probably be easier to erase your TM drive and start from scratch.
General File Recovery
If you stop using the drive it's possible to recover deleted files that have not been overwritten with recovery software such as Data Rescue II, File Salvage or TechTool Pro. Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive.
The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
Also visit The XLab FAQs and read the FAQ on Data Recovery.

My Macbook Pro can't detect or read my CDFS file system external HDD

My Macbook Pro can't detect or read my CDFS file system external HDD

Open Disk Utility and see if the USB drives show in there. If they don't then it is a USB port or bus problem. If they do show in disk utility are they formatted in either Mac extended or a Windows format?

Disk problem in MacBook Pro (hardware or corrupted files?)

I am running Mac OS X 10.6.8 on a 15" MBP 2.33 GHz Intel Core 2 Duo with 3 GB RAM (added 1 to the original setup.)
A few months ago I replaced the original 120 GB hard drive, as it was getting full and making my computer slower. The new one is a 350 GB 5400 rpm Western Digital drive. I did this myself, following the instructions in ifixit.com, as I have done it in the past with other machines, including my wife's MBP, that is working fine.
In the first OS install I used migration assistant and recreated the original user exactly as in the old disk. After a couple of months of use the computer started to get slower and presented permission problems that didn't seem serious (used Disk Utility to check). After a while, there was also a report of problems on disk verification, that at one point couldn't be repaired with Disk Utility. I was able to get rid of the problem for a while using Disk Warrior, but at some point the disk problems appeared again and I had to do a new OS install from zero.
This time I formatted the hard drive writing zeros to correct possible physical errors and did a clean install. Used migration assistant to copy only my user's documents and library. After a couple of weeks of running the laptop without problems, I am having again reports of disk errors that Disk Utility can't repair. Disk Warrior can't access the drive and Tech Tool Pro reports 72 bad sectors.
My question is:
Is this definitely a hardware problem that will be solved by replacing the hard drive again, or is it possible that this is being the result of some corrupt files on my user's library (as the problem only appears after a while)?

ign wrote:
Is it normal that the drve appears to be OK after an OS install and that the physical problem only appears after a while?
If you zero it, yes. That's exactly what zeroing does, "mapping" the HD so bad sectors/blocks are not used. But if a HD is dying, more bad areas will show up. It's time to replace the HD.

The Em Key is not configured properly or is corrupted in the file system and doe s not exist in the Management Repository.

I'm getting this error and is there any way to resolve this without re-creating the service/s again, etc. Just curious if there are any suggestions/steps I may have missed, if not, I'll drop and recreate the services again
Anyway, I have a backup of the emkey.ora and put it in the sysman/config directory, but still doesn't work... please see below...
C:\Documents and Settings\abigail>emctl status emkey
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
Please enter repository password:
The Em Key is not configured properly or is corrupted in the file system and doe
s not exist in the Management Repository. To correct the problem:
1) Copy the emkey.ora file from another OMS or backup machine to the OH/sysman/c
onfig directory.
2) Configure the emkey.ora file by running "emctl config emkey -emkeyfile <emkey
.ora file location>".
C:\Documents and Settings\abigail>emctl config emkey -emkeyfile E:\app\abigail\p
roduct\11.2.0\dbhome_1\sysman\config
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
Please enter repository password:
The Em Key is already configured. To override the current configuration, run "em
ctl config emkey <options> -force".
C:\Documents and Settings\abigail>emctl config emkey -emkeyfile E:\app\abigail\p
roduct\11.2.0\dbhome_1\sysman\config -force -sysman_pwd ********
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
The Em Key could not be configured. Unable to access file E:\app\abigail\product
\11.2.0\dbhome_1\sysman\config.
C:\Documents and Settings\abigail>emctl secure dbconsole -sysman_pwd ********
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
http://ABIGAIL:5501/em/console/aboutApplication
DBCONSOLE already stopped...   Done.
Agent is already stopped...   Done.
Securing dbconsole...   Started.
Please enter repository schema password:
Securing dbconsole...   Failed.
EMKey is misconfigured.

Sorry but I'll have to ignore your suggestion, and don't worry about how I spend my time
AND OHMYGODD IT WORKSS!!! For future reference, this is how I solved it based on my searches, actually based on one particular search:
http://franjv.blogspot.com/2013/08/emkey-problems-in-oracle-rac-11gr2.html
Thank youuu whoever wrote that and... is it the same "Fran" who helped me the last time?!? Coincidence??
ANyway, thank youuuu

Oracle vm 3.1.1 server pool file system corruption

Hi
I have a small lab environment composed by 2 Oracle VM Servers and SAN access.
This morning somehow the OCFS2 Server Pool File System (the 12GB one) corrupted and the Server Pool seems dead. How can I recover from this error? I looked in the documentation and MOS but found nothing
Thank you

I know it would be a lot of work in such a scenerio. I don't know what you're using for storage but you could snapshot or replicate the pool storage to create a backup that can be restored.
I do wish they would let you select more than one VM guest in the VM Manager. Would be really nice to have such. Seems like it would be a rather easy feature to implement.

I can't download the new java update for my macbook pro. I get a corrupt file message. Help!

I can't download the new java update for my macbook pro. I get a corrupt file message. Help!

"The new java Version 7 Update 13 is not exactly helpful in macbook pro.
try the version 11 or 12 they should work perfectly."
The OP is running 10.6.8 so Java 6 is his option at this point.
For the OP try here:
http://support.apple.com/kb/DL1573

Foxfire downloaded an up-date last night (10 20/2010) at 5:30 PM EDST and it crashed the compter on re-start with an error message... Missing or Corrupt File ... WINNT\system32\config\SYSTEM

Foxfire downloaded an up-date last night (10/20/2010) at 5:30 PM EDST when I started Firefox, and it crashed the compter on re-start with an error message... Missing or Corrupt File ... WINNT\system32\config\SYSTEM. This machine is Windows 2000 Professional on Dell computer and Foxfire 3.6 or 4 not sure computer is stuck at the error message.

Hi there,
You're running an old version of Safari. Before troubleshooting, try updating it to the latest version: 6.0. You can do this by clicking the Apple logo in the top left, then clicking Software update.
You can also update to the latest version of OS X, 10.8 Mountain Lion, from the Mac App Store for $19.99, which will automatically install Safari 6 as well, but this isn't essential, only reccomended.
Thanks, let me know if the update helps,
Nathan

Communigate Pro corrupting file system

Similar Messages

Maybe you are looking for