Communities not working on c3 using wifi

i bought nokia c3 a week ago and started to use it but i got a problem here browser is working fine using wifi or gprs but in case of communities i want to use facebook but it is not connecting to wifi whereas it is fine in case of gprs..........i have restored factory settings and also have tried to update phone but all in vain.........in case of updating it says no new updates available.................
Kindly help me if there is a solution so i can enjoy chat via facebook plzzzzzzzzzzz............
Thankx in advance

Hi,
 You need to do some settings:
How can i use always WLAN connection on my Nokia C3-00 phone for Internet instead of cellular netwok (GPRS)?  
 Select Menu > Settings > Connectivity > WLAN > Available WLANs > Check the WLAN name you wish to connect.
Select Menu > Settings > Configuration >Personal settings  > Add new > Access Point > Write the name of the WLAN access point you check before.
Select Menu > Settings and Configuration > Preferred access point — View the saved access points and choose the preferred WLAN access point
Menu > Settings > Connectivity > WLAN > Internet Connection :Ask first
you are asked for the connection method every time you open an application that requires an Internet connection such as Browser or Mail.
Br
Mahayv

Similar Messages

  • Communities not work!?

    Communities not work thank you 
    Message was edited by: Hamad137

    Please provide link.
    Provide user name.
    Take a picture and post here.
    There are a lot of bugs in apple support communities, ASC.
    Here is my ASC work flow...
    1) I login.
    2) Start an auto reloader.
    Unless you do something every thirty minutes you get logged out.  The forum software waits to tell you this as long as it can to keep you in suspense  ;-) .
    I use Firefox and ReloadEvery.
    https://addons.mozilla.org/en-US/firefox/addon/reloadevery/
    You need to pick a page that will reload over time without stalling out. It's ASC.  I've found my profile display the best to use. I get my Profile page after some  logins.  It's ASC.  Change rccharles to your apple id.
    https://discussions.apple.com/people/rccharles?view=discussions
    3) I open another window to do my normal ASC browsing.
    4) I have a FireFox bookmark to goto the discussions that I have participated in. I've modified it to add on the content stuff.
             turingtest2 recommends. Change rccharles to your apple id:  
    https://discussions.apple.com/people/rccharles/content?filterID=participated~obj ecttype~objecttype%5Bthread%5D
    5) Use turingtest2's generated links with the /content suffix as browser bookmark to the ASC discussions: 
    Site map of Communities and Categories
    https://discussions.apple.com/docs/DOC-2463
    6) I run with Hiroto's modification to user content.  This is the only way these forums are readable for me.  How to adjust the format and layout of ASC Web Pages:
    https://discussions.apple.com/docs/DOC-7501
    7) Read and answer my old posts.  I kind of memorize the time I last posted. ( It's way bad that apple eliminated the last poster to a thread. )
    8) I use tabbed browsering.  From a list of discussions, hold down the command key then click on the link. You get two tabs this way. The original window will keep where you have been.

  • Ichat is not working.  tried using port 443 and still does not work

    ichat not working.  tried using port 443 and i stay on for about 45 seconds then it disconnects.  Can you help?

    HI,
    Can you tell me the make and model of your routing device.
    The 10 Second error message is caused by a break in the connection.
    This could be the Wifi being dropped (if you are using WiFi) due to interference from other nearby routers.
    It can be dues to setting or features of the router and if the experience has changed that could be due to a speed increase in your internet service.
    If you are using Ethernet and having this issue it is much more likely to be a setting/feature issue.
    Examples.
    Netgears.  These have a separate WAN set up page that lists either DoS or SPI as one of the things that can be Enabled or Disabled.
    Linksys.  If your model has a Security tab and this has  Firewall then DoS and SPI are port of this.
    Netopia devices Tend to have a 4 level Firewall which DoS and SPI are part of the two highest settings.
    DoS = Denial Of Service and is a Threshold based "Protection" Feature.
    it judges whether too much data is being sent to you  (it was designed originally to stop people overloading Web Servers (many people, many refreshes).
    iChat can outstrip the setting with most Internet Connections in most part of the world.  (In fact iChat can send more data than most Video Streaming sites)
    One thing you can do that may get around this is to reduce the Bandwidth used in iChat (iChat Menu > Preferences > Video Section > Bandwidth Limit drop down)
    Try 500kbps
    10:07 PM      Wednesday; November 23, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • I have an ipod touch it is either a second or third edition and i have just had to restore it to factory setting as it was not working and now the wifi on the device is no longer working. Is there anything i can do about this?

    i have an ipod touch it is either a second or third edition and i have just had to restore it to factory setting as it was not working and now the wifi on the device is no longer working. Is there anything i can do about this?

    Is it this:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
    Settings > AirPlane Mode ON, Do Not Disturb ON
    Power down and wait 5-10 minutes
    Power up
    Settings > AirPlane Mode OFF, Do Not Disturb OFF
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar
    Otherwise:
    Does the iOS device connect to other networks?
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • My iPod Touch 3rd gen is screwed up the backlights screwed and the Wifi is not working its showing no wifi! What should i do??

    My iPod Touch 3rd gen is screwed up the backlights screwed and the Wifi is not working its showing no wifi!

    See:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
    Settings > AirPlane Mode ON, Do Not Disturb ON
    Power down and wait 5-10 minutes
    Power up
    Settings > AirPlane Mode OFF, Do Not Disturb OFF
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar
    For backlight
    - Reset the iOS device. Nothing will be lost       
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                  
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.                     
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      

  • Facebook like button is not working, I have used the muse widget and created code from facebook. Does anyone know how to get this to work?

    Facebook like button is not working, I have used the muse widget and created code from facebook. Does anyone know how to get this to work?

    Hi connally25,
    Below is a link to a video tutorial on how to add a Facebook Log button, please check if you have followed the same steps to add the video.
    http://tv.adobe.com/watch/learn-adobe-muse-cc/adding-a-facebook-like-button/
    If you have followed the steps correctly and the button still does not work; here is a link to a forum thread which might help solving the issue:
    Facebook Follow Widget not working
    Regards
    Sonam

  • I have a generation 1 ipod touch my wifi is not working, under setting the wifi says no wifi and is gray.  i have tried resetting it and its not workin. what should i do, please help. thanks

    i have a generation 1 ipod touch my wifi is not working, under setting the wifi says no wifi and is gray.  i have tried resetting it and its not workin. what should i do, please help. thanks

    If a restore did not fix it, you have a hardware issue--possible bad wi-fi radio.
    Basic troubleshooting steps. 
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 

  • Hello, I am a user of the iPhone is not the place for bi çıkıcak turkey apple brand products and product support and equipment does not work as it used to fix and send back waiting for your help. Please support me in this regard quit

    Hello, I am a user of the iPhone is not the place for bi çıkıcak turkey apple brand products and product support and equipment does not work as it used to fix and send back waiting for your help. Please support me in this regard quit

    We are all iphone users just like you.
    Do you have a question for fellow iphone users?

  • Tried to restore my mac pro, now it`s not working, can i use the time machine backups?

    Tried to restore my mac pro, now it`s not working, can i use the time machine backups?

    Yes.

  • What has happened to the iPad 2 finger select and drag technique? Since upgrading to iOS7 it does not work? I used this all the time to select multple images, approx 75  from an SD card containing 1000  images. Its painful indvidually selecting the images

    What has happened to the iPad 2 finger select and drag technique?
    Since upgrading to iOS7 it does not work?
    I used this all the time to select multple images, approx 75  from an SD card containing 1000  images. Its painful indvidually selecting the images

    What would you like us to tell you? If it doesn't work, there is nothing that we users can do about it.
    Please submit your feature request to Apple at this link: http://www.apple.com/feedback

  • "access restrictions" did not work sometimes when using 3-tier DeskI.

    My customer found that "access restrictions" did not work sometimes when using 3-tier DeskI.
    But this issue can be solved by logging on from another machine, or restarting the DeskI.
    For I can reproduce this issue, so I just want to know that:
    1.What is it probably related to?
    2.If this issue happens again, what can I suggest my customer for tracking it?
      For example, get some log files from servers etc.
    Thanks!

    Hi Sarah,
    Also you can try the following solution.
    1. Import the universe.
    2. Go to manage access restrictions
    3. Remove the restriction .
    4. Again create the rescrition and unchecked the " limit size of result set to"
    5. Now assign it to the unlimited results group ( this is the name of
    the group we have given to those users who should be able to retrieve
    more than X rows)
    6. Now we save the universe. (Dont export the universe).
    I hope this will help you.
    Regards,
    Sarbhjeet Kaur

  • My snapchat won`t work if i use wifi, its only working when im useing 3g

    my snapchat won`t work if i use wifi, its only working when im useing 3g

    Since this is an app-related issue, you may get better results solving your problem by contacting the app developer, or searching their help/FAQ pages.

  • My lap top name is hp pavilion dv 600. and my micriophon is not working . i am using windows 7.

    My lap top name is hp pavilion dv 600. and my micriophon is not working . i am using windows 7.  before that i was using widows vista. in the cotorl panel in the hardware and sound section . in the sound section  in the recording tab it is written that  microphone is not plugged in while i have microphone in front of my screen . could any one help me.?????

    Try to disable transparency in Windows, see:
    *[[/questions/804050]]
    Right click in a free space on your desktop.<br />
    Left click on Personalization.<br />
    There are four options at the bottom of the screen, choose "Window Color and Appearance".<br />
    Select a border color<br />
    Uncheck: "Enable transparency"<br />
    Try to disable hardware acceleration in Firefox.
    *Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
    *https://hacks.mozilla.org/2010/09/hardware-acceleration/
    *https://support.mozilla.org/kb/how-do-i-upgrade-my-graphics-drivers

  • Hyphen search in Adobe XI (11) not working as it used to in Adobe 10

    Yet to see a reply to this or googled a search outside Adobe
    a search for geo‐political in AR11 does not work if you use a keyboard dash - this has happened with several pdf documents - it always worked with AR10
    It WILL work if you copy and paste `geo-political' into a search box
    Pasting geo-political into Wordpad gives `geo ‐ political' and I paste into another program I use I get `geo
    Obviously there is some strange coding that AR11 is using - IS there a solution to searching for terms with dashes (other than pasting in the dash each time from the pdf
    Thanks

    Also, what is your Reader XI version?
    P.S. to share a file: https://forums.adobe.com/thread/1408375

  • HT4623 i can no longer access Safari.  It's not the phone because Apple just sent a new one and it still does not work.  I use the same computer to sync my ipodtouch5 and it has Safari.  My iphone4 does not.  What is the problem?

    I can no longer access Safari.  It's not the phone because Apple just sent a new one and it  (Safari) still does not work.  I use the same computer to sync my ipodtouch5 and Safari is operable.   However, Safari on my iphone is not.  What is the problem?

    That is the way it works. It designed to do that.
    In addition to everything else you have to this other person's computer you would have to move your complete iTunes library over also. Only then will it recognize youriTouch.
    Allan

Maybe you are looking for