Community boards notification problem.

Didn't quite know where to post this, hope here is okay!
Although I have all the various options for notifications by email selected in the board preferences, I am not getting any sent through, the email address is correct. Any one else having this problem and/or know how to rectify the problem?
Cheers.

Thank you, Andrew.
I have reported the matter to the hosts. As you will understand, they operate in their own way and we cannot guarantee they will reply. But my experience is they are very helpful and usually resolve matters like this.

Similar Messages

Why can't I post on the community boards

Cannot post or view anything on the community boards even though I have a working account.

Also, the main problem that I am trying to solve by accessing the community boards is controlling of a unipolar stepper motor that is connected to an arduino duemilanove. I have the LIFA tool kit which is the tool kit designed specifically for the arduino to interface with lab view. Ideally I want to be able to use lab view in conjunction with the arduino to turn the stepper motor 90 degrees by pushing a button on the block diagram and stop. Then, when I push another button on the block diagram the stepper motor will return to the orignal position and stop. This is to simulate the opening and closing of a garage door. If you can offer any help on the community board question or the stepper motor code it would be greatly appreciated. Thank you

Is there an iPad Games community/board?

I looked at the list of communities/boards, but I didn't see one for iPad games. Is there one?

This is from page 252 of the iPad user guide BOOK that is available as a free download in the iBooks store. I may have misled you as to this being a community board per se. However is is a social gaming experience where I believe that you can post messages to friends, receive notifications and things of that nature.
The iPad user guide would certainly come in handy and as stated you can download the book in iBooks, it is available as a bookmark in Safari and here is the link to the PDF version.
http://manuals.info.apple.com/en_US/ipad_2_user_guide.pdf
About Game Center
You can discover new games and share your game experiences with friends around the world in Game Center.
Invite your friends to play, or use auto-match to find other equally-matched opponents. Check leaderboards to see who the best players are. Earn bonus points by achieving specific accomplishments in a game.
Note: Game Center may not be available in all countries or regions, and the available games may vary by country or region.

Entire JDBC communication stopped if problem with one single JDBC interface

Hello,
Will the entire JDBC communication stopped if problem with one single JDBC interface?
Thanks,
Soorya.

hi surya,
this will happend if u use maintain order at runtime at interface determination.
just uncheck this option if u dont neet EOIO.
if you are getting the problem if u r going for EO then the problem might be using same JDBC channel for all interfaces.
if each interface is expected with a high load then it better to go for dedicated channels for interfaces.
like INTERFACE A should use JDBC A channel and INTERFACE B should use JDBC B channel.
Thanks & Regards,
Rama krishna

JDBC communication stopped if problem with one single JDBC interface

Hello,
Can you please explain this phrase
"JDBC communication stopped if problem with one single JDBC interface"
THanks,
Soorya

If you are having a problem with a JDBC interface (lets consider this to be a communication channel) then the communication is stopped (via that channel) (only in the case of EOIO).
Hope this clarifies.
Cheers,
Sarath
Award if helpful.

I reset my iPhone 4 Network settings to fix the push notification problem, but I lost my internet connection. How do I fix it?

I tried to solve the "connect to iTunes to receive push notifications"-problem by resetting my network settings, but it only caused me to lose my internet connection when using 3G. Now I can't do anything with this stupid phone. How do I fix it? I don't want to reset anything anymore, I'm sick of this new iOs update, it seriously messed up my phone and I can't do anything properly anymore. Any help?
And btw, I would also like to get the push notifications back on. Connecting to iTunes did absolutely nothing. Resetting the network settings only made my situation worse. Help please!

Hi there Julia,
Ahh The iPhone isn't "stupid" it's been called "stupid" because you are frustrated at the situation , but try
Load iTunes. Backup your phone. Make sure it is backed up !! Run restore. This will get rid of the error! And please what ever you do , do not skip the back up!
Thanks,

Lenovov S960 / Vibe X LED Notification Problem after Official Upgrade to Kitkat

hello Lenovo,
after i updated my phone to kitkat i found so many problems (bugs). like the contact manager crashes, no name in incoming call and the LED notification. before i updated my phone to kitkat the LED notification always blink when i recieved emails, messages, missed calls, bbm, whatsapp, and line.
but now with kitkat running my phone, the LED notifciation doesn't blink anymore everytime i recieved notifications. i already turned on the LED notification in phone settings and apps setting. am i the only one who's facing this problem or there is anybody else that facing the same problem?
please help me anybody how to solve this problem?
and i have one more question. how to keep apps running on background? apps like bbm, line and whatsapp are closed everytime i clean up the ram and never come back on again until i open the apps again. and again i face this problem after i updated my phone to kitkat.
any kind of help is very appreciated.
my build number is S960_ROW_S210_140529

Hi, I found there are other issue apart from contact manager crash issue after upgrade from Jelly bean to KitKat 1. in the same way google chrome is also crashing after trying to open gmail and start enetering username2. caller name is not displaying while getting incoming or outgoing calls3. I found some suggestion in the same community website that first take a backup, delete all the contacts, and them import it back to solve the issue. But why we need to do these, why this issue is happening after upgrade4. however I deleted contacts and tried export from the storage. While doing so, Contacts->Menu->Import/Export contacts->Import from storage, it finds and displays all the .vcf files. Very good, but there is no select button to 'select all' the vcf file to import to the address book. I don't want to sit and select each .vcf file from the list to import it as there hundreds of contacts. I think 'select all' option is missing after upgrade. I heard, in kitkat version some performance issue is fixed but now it seems to be many basic functionality features are not working after upgrading. We are all waiting for your response and good kitkat upgrade notification in our mobile. Thanks,Sharath

Q10 Notifications problem

Hi everybody !
I got my new Blackberry Q10, one week ago and I am having problems with the notifications.
When I turn on my phone it's working well for a time then all stops. Notifications are not ringing, bell too, I can't see who's sending me notifications...
I have to go on the contact or in the text message to see if I got an answer from somebody...
If I turn off the phone and turn on again it's working again but just for a while and I have to turn off again and re-turn on to got new text messages....
I tried to reboot, to reinstall, to reset? nothing happen. It's really frustrating !!!

Hello Dhalster and welcome to the BlackBerry Support Community Forums.
Sorry to hear you're experiencing an issue with your sound notifications.
What software version is your BlackBerry Q10 running? Check under Settings>About>OS.
Does this seem to occur with text messaging or all messages - emails, Facebook, Twitter etc?
Are you using the standard tones or did you select custom tones?
Thanks!
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

PC Suite Notifications Problem (Nokia 6110 Navigat...

Hi,
I have a Nokia 6110 Navigator and i have just installed the latest version of PC Suite. I've been using PC Suite for a long time and of course i installed PC Suite Support to my phone a long time ago. While I was installing the new PC suite, the installer said the PC Suite support that is installed on my phone was old and i had to install the new PC Suite support to use new notifications feature. I installed PC Suite properly and it's working very well. But in the Help menu, i can't click the option "install PC suite support" (or something), it says "Please reinstall PC Suite". I reinstalled it, but that option is still disabled. Can you please help me?
Best regards,
Temmuz
(sorry for my poor English)

Hi temmuzk,
On your phone menu > Settings > Data Manager > Application Manager... Look for MMSSync has got installed on your phone. If it is installed already, no need to worry. If not, Connect your phone using USB select PC Suite mode, open Nokia Communication Centre, if MMSSync was not installed on your phone, it will ask you to install this on your phone. I guess you have already installed this on your phone.
If you have any clarifications on PC Suite notifications you can view this post
/discussions/board/message?board.id=pcsuite&message.id=32198&query.id=201515#M32198

Solaris 8 on Intel STL2 server board - installation problem

Hi,
I try to install Solaris 8 (4/01) on Intel STL2 server board (P III 866 MHz, SDRAM 512 ECC Reg, Adaptec AIC7899 Dual Channel-one Ultra160/LVD channel, Intel PRO/100+ Fast Ethernet Controller, ATI Rage* IIC SVGA) - without success.
It recognizes all devices but after I choose Solaris Interactive installation (from CD labeled Solaris 8 Software 1 of 2 Intel Platform Edition) it displays:
Booting kernel/unix...
SunOS Release 5.8 Version...
then reboots after 2 seconds.
Since Intel STL2 board appears in the HCL for Solaris 8 I have struggled a while with the problem. I have not found neither post nor driver update information concerning this issue on the Solaris' related Web sites.
Finally, I found the very strange specification update info of STL2 board, published by Intel:
"13. Sun* Solaris* 8 installation issues
PROBLEM: Sun Solaris 8 cannot be installed on the STL2 server board with any BIOS version later than BIOS Release 1.1, Build 15. The system reboots during install and therefore the installation cannot be completed.
IMPLICATION: Installation of Sun Solaris 8 cannot be completed on an STL2 server board running any BIOS release later than BIOS Release 1.1, Build 15.
WORKAROUND: Sun Solaris* 8 will successfully install on the STL2 server board with BIOS Release 1.1, Build 15."
My BIOS release on the STL2 board is 1.7. It's too new to install Solaris 8 !?!
I am unable to get an old STL2 model with BIOS 1.1. Is there a way to update anything in the Solaris 8 in order to set it up on the new model of Intel STL2 server platform?
I would appreciate any help. Thanks.
Matt

The problem has been resolved.
I got the older BIOS 1.1 Build 15 for Intel STL2 from Intel Internet Support. After I installed BIOS 1.1 instead of BIOS 1.7 had no problem with installation of Solaris 8.
Matt

ICal Notifications (problems)

I'm having a heck of an introduction into the world if notifications, and I can honestly say, I'm frustrated, so I apologize if this comes off sounding short.
I received an important notification from a business partner of mine with all of the details of the meeting enclosed in an iCal Invitation attached to an email from them. The attachment seemed fine, the icon displayed inline with the attached message. (using Mail.app). I clicked on it, and was taken to iCal.
The notification appeared in the notification box in iCal.
Clicking on the invite, iCal spat back the error: "Someone invited you to an event using an email address that isn’t on your “me” card in Address Book. Find your email address in the following list and add it to your card in Address Book."
Unfortunately there is no email address listed for me to add to my Me card. I've looked all over the web, and no one seems to have a fix.
1. Tried recreating card in Address book and re-associating it to me
2. Tried making a card with JUST the email address the invite was sent to
3. Searched the web and found a few references on how frustrating it is, no answers
4. Submitted a bug report to Apple (4/29/07)
Any help would be most appreciated.

I have this exact same problem, and I cannot figure out what to do. My "me" address card now includes 3 versions of the e-mail address receiving he invitation:
[email protected]
<[email protected]>
My Name <[email protected]>
iCal still will not recognize it, and will not accept the invitation.
What can I do?

Skype notifications problem with dual monitors

A few days ago I did a fresh install of arch on my laptop (intel graphics) and since then when I am using 2 monitors, one 1366x768(primary-right) and the other 1920x1080, Skype notifications that are supposed to be shown on the primary monitor do not appear at all. From what I read, they do appear but off-screen, as if the primary monitor was 1920x1080. Any ideas what may be causing this issue?
Thanks!

This is related but does not solve the issue for me. It might help someone though http://community.skype.com/t5/Linux/I-m … d-p/259026

Extended notifications problem

Hi experts,
I am trying to configure extended notifications for around 7 to 8 different taks
pertaining to different workflows.
I could successfully do it for 1 task.
Then after successful testing I did add more filters to the same configuration
under same subscription and delivery.
I even created new schedules for the new filters. But unfortunately it is not working.
I could debug the standard program SWN_SELSEN and found that the particular WAPI call to
select the delta Work Items from SWWWIHEAD and SWWWIHIST is failing because of some
timestamp mismatch.
Can you please provide me some help regarding this ?
Thanks,
Deb

Hi Purvesh,
You can find the step by step procdure in the following blog.
How to get Work items @ your Outlook Inbox
You can find all the definitions and theories in the SAP Help link provided in the same blog.
I initially followed the above and could successfully do it for 1 task.
However, I was stuck in achieving the same for multiple task belonging to different workflows.
Here is how I did it:
1) Do the configuration in SWNCONFIG as per the blog and SAP Help
     A) Create your own delivery schdule
     B) Create your own subscription using the above delivery schedule
     C) Create your own filters
     D) Create your own selection schedule
2) Then run the report SWN_SELSEN to do the actual selection and delivery based on the schedules    you created.
The key is creating the filters. Follow the SAP Help link closely and try it. If you face any problems
the please let me know.
Please award appropriate points.
Thanks & Regards
Deb
Edited by: debabrata mohanty on Dec 10, 2008 11:26 AM

Speaker and notification problem on my iPod touch...?

Earlier today, I was listening to music on my ipod when it suddenly turned off. This confused me, so I just turned it back on- the only problem is that it didnt work. I pressed the play button, and it showed the song was playing, but it wasnt. I did not have headphones in. After a few minutes of trying, I just tried to turn it up, resulting in the discovery that my volume buttons were not working, and on my music app the music bar didnt show up. Also, after this happened, I realized that when my ipod was locked- I was no longer getting my notifications alerting me. The ipod music works fine with headphones plugged in, and now the volume buttons are working but the only time sound comes out is from the settings volume when I tested it.
I have already reset my ipod, both ways. I reset it just by pressing the home and power button and then reset it by resetting all settings. I really need help, I don't know what's going on with it.

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Check also Settings > General > Accessibility > Hearing. Make sure that the sound balance is not set all the way to "R".
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

Regarding Receiver Communication Channel (Concurrency problem)

Hi Masters ,
In Receiver Communication Channel which is connected to oracle data base ..while updating records Status from N to C . i am getting following errors :
**Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Channel has reached maximum concurrency (5,000 concurrent messages) and no free resource found within 5,000 milliseconds; increase the maximum concurrency level**
Actually we are updating 10000 records status from N to C....... earlier it was updating in 30min now its hanging and giving above error ...... after 3 hrs its automatically displays updated succesfully message .
Can you help me to understand wht exactly happening and at wht level i have to do settings in communication channel so tht it should work properly..
Thanks in Advance.............
Jagannath.

Hi Jagannath
you can specify the maximum concurrency for receiver adapters. This defines the number of messages an adapter can process in parallel on a cluster node.
Enter the number of messages to be processed in parallel by the receiver channel. For example, if you enter the value 2, then two messages are processed in parallel. Default value is 1 and this means only one message can be processed at a time by the receiver channel.
http://help.sap.com/saphelp_nw70/helpdata/EN/64/ce4e886334ec4ea7c2712e11cc567c/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/bc/bb79d6061007419a081e58cbeaaf28/frameset.htm
increase this parameter from 1000 to a higher value you required and you would not be facing such problem
Regards
sandeep
If helpful kindly reward points

Community boards notification problem.

Similar Messages

Maybe you are looking for