Community profile lost after switching from facebook-connected to email-based account?

Hi there, apparently I do not have access to my old facebook-connected profile here in the community after switching to a new, e-mail based account. Is there a way to merge my new account (alexanderklar) with my old one (klar)? Or maybe reactivate access to my old account via my e-mail-based credentials? Thank you and best regardsAlexander Klar

Hey , looks like your account is now ready!
Log in with "alexanderklar" and it will log you back into your old account automatically! :)

Similar Messages

After switching from SUNJVM to SAP JVM on Netweaver 7.0 server

After switching from SUNJVM to SAP JVM on Netweaver 7.0 server the b2b application and the xcm configuration detail cannot be accessed
it gives the following error.
#1.5 #00059A3C7800006D0000002C000015980004B30C3E45830D#1322765072300#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#niit.com/b2b_niit#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#Guest#0##n/a##820feec01c4c11e1c79300059a3c7800#SAPEngine_Application_Thread[impl:3]_32##0#0#Error#1#/System/Server/WebRequests#Plain###application [b2b_niit] Processing HTTP request to servlet [action] finished with error.
The error is: com.sap.engine.services.servlets_jsp.server.exceptions.ServletNotFoundException: Cannot load the requested servlet [b2b_niit/servlet/action].
Exception id: [00059A3C7800006D0000002A000015980004B30C3E457F63]#
#1.5 #00059A3C7800006D0000002D000015980004B30C671A5D9B#1322765757605#com.sap.engine.services.servlets_jsp.client.RequestInfoServer#niit.com/b2b_niit#com.sap.engine.services.servlets_jsp.client.RequestInfoServer#Guest#0##n/a##1a892d501c4e11e1b99700059a3c7800#SAPEngine_Application_Thread[impl:3]_32##0#0#Error##Plain###application [b2b_niit] Processing HTTP request to servlet [action] finished with error. The error is: com.sap.engine.services.servlets_jsp.server.exceptions.ServletNotFoundException: Cannot load the requested servlet [b2b_niit/servlet/action].
     at com.sap.engine.services.servlets_jsp.server.runtime.context.WebComponents.getServlet(WebComponents.java:330)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:354)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: java.lang.NoClassDefFoundError: com/sap/isa/core/ActionServlet : cannot initialize class because prior initialization attempt failed
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:282)
     at java.lang.Class.newInstance0(Class.java:310)
     at java.lang.Class.newInstance(Class.java:263)
     at com.sap.engine.services.servlets_jsp.server.runtime.context.WebComponents.getServlet(WebComponents.java:319)
     ... 14 more
Caused by: java.lang.ExceptionInInitializerError
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:282)
     at java.lang.Class.newInstance0(Class.java:310)
     at java.lang.Class.newInstance(Class.java:263)
     at com.sap.engine.services.servlets_jsp.server.runtime.context.WebComponents.addServlet(WebComponents.java:117)
     at com.sap.engine.services.servlets_jsp.server.container.ApplicationThreadInitializer.loadServlets(ApplicationThreadInitializer.java:386)
     at com.sap.engine.services.servlets_jsp.server.container.ApplicationThreadInitializer.run(ApplicationThreadInitializer.java:110)
     ... 4 more
Caused by: org.apache.commons.logging.LogConfigurationException: java.lang.reflect.InvocationTargetException
     at org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactoryImpl.java:532)
     at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:272)
     at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:246)
     at org.apache.commons.logging.LogFactory.getLog(LogFactory.java:395)
     at org.apache.struts.action.ActionServlet.<clinit>(ActionServlet.java:375)
     ... 13 more
Caused by: java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:282)
     at org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactoryImpl.java:525)
     ... 17 more
Caused by: java.lang.NullPointerException: while trying to invoke the method com.sap.tc.logging.Location.debugT(java.lang.String) of an object loaded from field com.sap.isa.core.logging.sla.IsaLocationSla.location of an object loaded from local variable 'this'
     at com.sap.isa.core.logging.sla.IsaLocationSla.debug(IsaLocationSla.java:583)
     at com.sap.isa.core.logging.sla.IsaLocationSla.<init>(IsaLocationSla.java:46)
     at com.sap.isa.core.logging.IsaLocation.getInstance(IsaLocation.java:52)
     at com.sap.isa.core.logging.StrutsLog.<init>(StrutsLog.java:25)
     ... 22 more

Hi,
That particualr error should be solved by adding the following parameter to your instance profile:
jstartup/vm/parameters = -XX:-ExtendedExceptionMessages
The issue is related to note 1693118
Kind regards,
Cathal

IPhone 4s Voice mail notification not working after switching from Verizon to PagePlus.

iPhone 4s Voice mail notification not working after switching from Verizon to PagePlus. How can I get the notifications working?

Contact your carrier - voicemail, and visual voicemail, is a carrier feature.

Blurry font after switching from WinXP to Win 7 (Was:Schrift im Dreamweaver CS 3 verschwommen)

<Preran> For the benefit of moderators here, I used Google to translate your content into English:
Good day,
I have problems with blurry font in Dreamweaver CS3 after switching from Windows XP to Windows 7
I have already tried the following:
In "Edit" Preferences "change font size" - unfortunately that does not work. (which had worked fine in the previous changeover to Windows XP)
Then I got in the forum www. office-loesungen.de the tip, sometimes seen on the control panel display, which percentage is set.
When I got the set to the mean value, the writing was not so blurry, but still not really readable.
Experiments with Clear adjust TypeText were not successful.
There is a trick, so the font is larger
If I have to "small" hinders the size that was at 0.75 in the previous pages, it is readable for me, so I could enter the text and read it.
However, the text is then when uploading larger.
What can I do now?
For speedy help I would be grateful
Best regards
Guten Tag,
ich habe Probleme mit verschwommener Schrift im Dreamweaver CS3 nach der Umstellung von Windows XP auf Windows 7.
Ich habe folgendes schon probiert:
Bei „Bearbeiten“ und Voreinstellungen „Schriftgröße ändern“- das funktioniert leider nicht. (das hatte bei der letzten Umstellung auf Windows XP wunderbar geklappt)
Dann bekam ich im Forum www. office-loesungen.de den Tipp, mal über die Systemsteuerung-Anzeige zu sehen, welcher Prozentwert eingestellt ist.
Als ich den auf den mittleren Wert eingestellt habe, war die Schrift schon nicht mehr ganz so verschwommen, aber immer noch nicht richtig lesbar.
Auch Versuche mit Clear Type Text anpassen waren nicht erfolgreich.
Einen Trick gibt es, wodurch die Schrift größer wird
Wenn ich die Größe, die bei den bisherigen Seiten bei 0,75 lag , auf „klein“ verstelle, ist es für mich lesbar, ich könnte den Text so eingeben und auch lesen.
Allerdings wird der Text dann beim Hochladen auch größer.
Was kann ich jetzt tun?
Für baldige Hilfe wäre ich dankbar
Mit freundlichem Gruss
Renate Gundel

I've done this multiple times and it produces essentially the same message, but there is a mention that a restart is pending. This is also strange because this is definitely not the case. First time I used CScleaner it took a while and was obviously busy correcting something. However now when I select clean all, it simply dumps anopther massive log file into AppData and says cleaning completed successfully. Now I just ran it again, so would you like me to post the more recent log file?

NI-4060 giving invalid 1st reading after switching from or to LOW Resistance Measurements

We've been using TestStand & LabView to test various Circuit board. On series of test involves checking for a short circuit (Measure Low Resistance 4-wire) then measuring for a 3.5Vrms signal on another part of the board.
For each measurement, the following NI-DMM VI's are used in order:
niDMMInit, niDMMAutoZero, niDMMConfigure, niDMMMeasure, niDMMClose.
If we do the Low Resistance 4WR measurement, then a AC V measurement, the 1st reading from the DMM is approx 10x too high, if a 2nd reading it done it is then OK.
It doesn't matter how long a delay is before we take the 1st measurement, it's always approx a factor of 1E+1 out.
If however we don't do a Low Restance prior to
the AC V measurement, then the measurement is always correct.
I expermented with turning AutoZero on & off, and various resolution settings, however none of these seem to have an effect on the result.
Can anyone explain these strange results?
Thanks
Simon Holman
Simon Holman
Software Engineer
Certified LabVIEW Developer
Certified TestStand Developer
measX GmbH & Co. KG.
http://www.measx.com

Thanks, after playing with a few more settings I found if I turned the Cacheing off niDMMInitWithOptions, with "Cache=0" that everything worked fine, but it would take a couple of seconds to get the first AC measurement after switching from resistance.
Simon
Simon Holman
Software Engineer
Certified LabVIEW Developer
Certified TestStand Developer
measX GmbH & Co. KG.
http://www.measx.com

Some issues after switching from 686 to x86_64

Hi all,
after switching from i686 to x86_64 using this link I am now facing some minor issues with some packages. I already activated the multilib repository but some problems remain. I checked the binaries in /usr/bin for 32 bit executables as described in the above link and there are 177 "bad" binaries left. I thought all of these were not executable, but surprisingly wine was. Strange!
ffmpeg is another 32 bit executable and not runnable. So I tried to reinstall it, but that failed:
> pacman -S ffmpeg
warning: ffmpeg-1:2.6.1-1 is up to date -- reinstalling
resolving dependencies...
looking for conflicting packages...
error: failed to prepare transaction (could not satisfy dependencies)
:: ffmpeg-compat: requires libx264.so=144-32
libx264 is installed and didn't want to be reinstalled either:
> pacman -S libx264
warning: libx264-2:144.20150223-1 is up to date -- reinstalling
resolving dependencies...
looking for conflicting packages...
error: failed to prepare transaction (could not satisfy dependencies)
:: ffmpeg: requires libx264.so=144-32
:: ffmpeg-compat: requires libx264.so=144-32
Can someone give me a hint, what's the best way to solve this problem?
Thanks in advance, Zmann

I think the first issue you will run in to is that the interface for an old P4 hdd will probably not be the same as a new computer. Besides that, it will probably be vastly slower than what comes with a new computer. I think that is not the best idea.
The only wat to really "trasition" between two archtectures that I know of is to copy configuration files over and have pacman dump a list of explicitly installed packages from the main repos. Then use that information to reinstall all those packages.

After switching from iphone 4 to iphone 6 i lost sync with iMessage on my mac book

Hello
I have jsut switched from iPhone 4 to iPhone 6. Previously I could use iMessage sync'ed on my iPhone and my Mac-Book. Now I doesn't work anymore. I went into settings->messages->SMS transfert from the iPhone. I saw the Mac Book being referenced but when I put the switch into green it shows a pop-up asking me to pin-in the code that should be shown in Messages from the Mac-Book but nothing is posted there.
I hope I am clear. Just trying to get back to what I used to like as very convenient.
Thanks in advance for help.
Best
Pierre

Hello
In the meantime while I was working on the issue a window popped on my iPhone asking for my password for iCloud. So I wasn't connected to iCloud and after I connected it all went OK and iPhone 6 now coupled with iMessage on the Mac Book.
So I'm fixed and thanks again for your help.
Best
Pierre

Server connection lost after "wake-from-sleep"

I've got a network attached storage (NAS) device which I use as a location for backing up information from my hard drive. It's a windows based server so I use smb://servername to connect. I've got things set so that my Mac will connect when I log in but I've noticed that the computer will lose connection with the server after waking-from-sleep. Has any one else run into this? Any thoughts?
17" G4 iMac Mac OS X (10.3.9)

hi there--
i would write down all your network settings if you don't know them, and then trash the /library/preferences/systemconfiguration folder. (that's at the root or harddrive level). then restart the computer and re-enter your network settings. this solves a lot of problems with connections cutting out after sleep. [ 8 ) ]

OS X partition becomes corrupt after switching from Bootcamp

So I've had to reinstall os x 10.9.1 no less than three times this week and multiple times before in the past after switching between os x and windows 8.1. This usually happens after I've been using windows for a prolonged period then switch back to os x but it happened today after reinstalling os x from a time machine backup just yesterday. I'll switch between the two and os x becomes corrupt and begins the loading bar sequence after selecting the os x partition via the refit boot manager. I tried repairing the partition using disk utility from the repair partition and an external installation of os x 10.9.1 but every time the disk becomes corrupt and needs to be wiped and reinstalled or install a time machine backup. I've lost count of how many times I've had to do this and to make things even worse both of my external disks have become corrupt after being disconnected for two days while I sort this mess out. Does anyone else have similar issues or can locate an issue somewhere?

Yeah I reinstalled osx 10.9.1 and installed all my apps, put everything back then used bootcamp to create a partition for windows then used wineclone to install my windows 8.1 backup. I jumped from windows > osx > windows > osx inside an hour to move around a few things and I forgot verify bootcamp after I installed the backup and that last time I booted to osx it was corrupted. I used disk utility from my external installation and the recovery partition and both times they need repaired which only came up with the backup and wipe notification window. There have been two occasions where I was able to fix the osx partition from my external osx installation and continue using osx quite perfectly but usually the partition becomes un-mountable after it fails to repair. Usually when this has happened the twenty something times before it's after a prolonged period of a few weeks using windows.
I'm using refit boot manager and paragon NTFS 11 which may be the only software I've installed that could be corrupting the boot.
SMART status is verified

Problem loading safari webpage after switch from EDGE to 3G and vice versa.

ok, very simple question
i'm on edge, i want to go on safari, so i enable 3G. after that i go on safari and try to open a webpage. even after the 3G icon displays on top, it still takes a very long time before the webpage starts to load. Sometimes i get a message saying Safari could not open the page because the server stopped responding. IS THIS NORMAL?
also if im on 3G and switch down to EDGE and then open a page in safari i get a message saying Could not activate cellular data network, even though the page loads anyway. IS THAT NORMAL?
Message was edited by: Stevendo

are you on 4.0.1?
if so then this of course is not normal but it is also happening to me
ill be at home and have 3G on 4 bars and i try to load a page on safari and nothing happens, then i switch it to edge and it connects, but like u when switching from 3G to edge i get those messages.. also i noticed that this only happended after i updated to 4.0.1 and i NEVER got these problems b4 on 4.0 and to make things worse.. in order for my 3G data to work i have to make a phone call, hang up, then ill get connectivity on 3G..
so the fix... i dont kno??
but im suffering like u...

"Class Not Registered" after switching from 32-bit to 64-bit LabVIEW.

I recently upgraded LabVIEW 2012 from 32-bit to 64-bit. Now I'm getting an error that says "Class not Registered". It still works just fine with the 32-bit version.

Thank you Nathan and Sunshine. The problem is I didn't build the program - it came with the instrument. As far as I can tell this is what's going on: The vi's are replete with these activeX objects - all communication with the instruments is done through invoke and property nodes. After switching to 64-bit the very first sub vi has an error at the very first command (Err (-2147221164)). It's a reference (seemingly to a class but I actually have no idea what that means) passed to the "Open Automation Function". I'll attach a screen shot for the sake of overkill.
Attachments:
labviewerror.png ‏20 KB

Macbook pro retina color profile changes when switching from integrated to discrete

Late 2013 macbook pro retina color profile changes when auto switching from integrated to discrete graphics card. Problem started after updating to 10.9.3

Same here. Really annoying because I have my screen calibrated for photo editing, which makes it much warmer than the default color profile. A lot of websites cause the graphics cards to switch for a couple of seconds, which causes the profiles to switched back and forth a few times, everytime. Really annoying, and dissapointing to see, considering Apple released like a hundred .3 betas.
You can use gfxCardStatus to make it stay on one graphics card over the other... Just remember to change it back when you're using a program that actually needs the descrete card.

No Audio after switching from Headset/Speakers

Product : Sound Blaster Z
OS : Windows 7 Ultimate x64
Issue : No audio when switching from headset to speaker or speaker to headset
Description : I used to have it working perfectly fine before I formatted my computer. I could be playing a game or watching a movie using my speakers, then I would use the switch in the SB Control Panel to make it play through my headphones and everything would work. Now if I do that, I loose the audio from that program that is currently running. Meaning I have to restart the program and the audio will come through the specified audio device. Sounds like the windows setting "Allow applications to take exclusive control of this device" is acting up, but I have tried this with both the setting on and off.
Any help is appreciated.

AFAIK some applications loose audio on switch, while others don't.
are you saying the same app once didn't loose audio on switch, now does after a format ?
in other words, do you believe that before the format nothing ever lost audio on switch ? that would mean there's a way to solve it, as most of us, if not all, are having that same issue (which is Creative's fault, not Microsoft's).

My photos lost after update from 3.1.3 to 4.0.0

Sorry for my English.
After updating from 3.1.3 to 4.0.0 I lost pictures.
They occupy the volume is displayed in iTunes, but they are not.
New photos continue numbering from the old and the volume in iTunes is increasing.
How to return all the pictures in the phone, only see those that did after the upgrade?

Thanks. I found this:
I first learned this technique when upgrading my iPhone 3G to iOS4:
1) Connect your iPhone to your computer
2) Run iPhone Explorer on your computer (install it if you don't already have it)
3) Backup (copy to a folder on your computer) and then delete the following files:
/DCIM/.MISC/Info.plist
/PhotoData/Photos.sqlite
/PhotoData/PhotosAux.sqlite
4) Unplug your iPhone, launch Camera Roll app and wait as it rebuilds the database.
The thumbnails that were showing as black on my iPhone look perfect now.
And very happy!

Can't access PIX 501 after switch from dsl to cable

Hi--
I have two small offices and recently switched from dsl to cable internet. the two pix501 f/w units worked fine on dsl, but for the life of me I cannot even access the units now from the inside as I was able to do before when on dsl signal. I know I need to change the configuration from PPPoe to DHCP, but I can't get access to do it.
Any suggestions?
I believe I have 6.2 software, but I'm not sure. The Inside address is 10.8.6.1 now.
thanks--jb

Jorge--
I did have the Pix connected to router, 192 168.1.1 for convenience, so I could still get internet wirelessly without having to do lots of wire unplugging and plugging.
I have since changed to topology of comcast modem connected directly to pix which in turn connects directly to laptop.
In this configuration, laptop pings 10.8.6.1 ok, but pix has no connectivity to comcast.
When laptop connected directly to comcast modem,(ie pix removed) the ipconfig /all from laptop reads the following from comcast:
ip 71.192.7.130
mask 255.255.252.0
DG 72.192.11.1
DHCP server 68 87 71 52
DNS 68 87 71 226 and 68 87 73 242
Response to pix# show route | inc 0.0.0.0 is nothing.
For reference, here is show run
pixMDC# show run
: Saved
PIX Version 6.3(5)
interface ethernet0 auto
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password PVSASRJovmamnVkD encrypted
passwd PVSASRJovmamnVkD encrypted
hostname pixMDC
domain-name keene.com
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
access-list outside_access_in permit icmp any any echo-reply
access-list outside_access_in permit icmp any any source-quench
access-list outside_access_in permit icmp any any unreachable
access-list outside_access_in permit icmp any any time-exceeded
pager lines 24
mtu outside 1500
mtu inside 1500
ip address outside dhcp setroute
ip address inside 10.8.6.1 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
pdm location 10.0.0.0 255.0.0.0 inside
pdm logging informational 100
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 10.8.6.0 255.255.255.0 0 0
access-group outside_access_in in interface outside
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout sip-disconnect 0:02:00 sip-invite 0:03:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
aaa-server LOCAL protocol local
http server enable
http 10.0.0.0 255.0.0.0 inside
http 10.8.6.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
telnet 10.8.6.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd address 10.8.6.2-10.8.6.33 inside
dhcpd dns 151.203.0.84 151.202.0.84
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd auto_config outside
vpnclient server 10.8.6.0 10.0.0.0
vpnclient mode client-mode
vpnclient vpngroup fnd password ********
vpnclient username fnd password ********
vpnclient enable
terminal width 80
Cryptochecksum:6ca15e834dc867c6f12b46b2bd28a4a8
: end
pixMDC#
pixMDC#
pixMDC#
pixMDC# ping 71.192.7.130
No route to host 71.192.7.130.
Usage: ping [if_name]
pixMDC#
It appears that the pix is not seeing the comcast dhcp signal and latching onto it.
Thanks,
Jeffrey

Community profile lost after switching from facebook-connected to email-based account?

Similar Messages

Maybe you are looking for