Community Publishing-"Unable to connect to the CPS server" Error

I am trying to connect to Community publishing.
I download the Community Publishing Air app, but when I put in my username/password,
I get this error "Unable to connect to the CPS server. Please make sure your firewall settings allow access to this url:
http://cps.corp.adobe.com/nioamfpoll".
I have updated Air, but got the same behavior.
I am running osx (10.6.6)  on a 8 core Xeon.
Any suggestions?
Thanks
Clay

Hi Clay,
Do you have a firewall, or are you behind a corporate firewall that blocks certain ports on your machine?
What do you see when you visit this URL?
http://cps.corp.adobe.com
How about the following URL?
https://cps.adobe.com/nioamfpoll
Thanks,
Puny Sen

Similar Messages

  • "Unable to connect to the remote server" error message (ID 6102) in event view after installing MOSS 2007

     Hi brothers,
    After installed the Moss 2007(basic) , I find some error in event view. The event ID is "6102". More detail information is shown below.
     Event Type:        Error
    Event Source:    Office SharePoint Server
    Event Category:                Launcher Service Event ID:              6102Date:                     11/27/2007Time:                     8:22:17 AMUser:                     N/AComputer:          MOSS-001Description:LoadBalancer.RegisterLauncher failed:  Unable to connect to the remote server For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. 
    Please help me, thanks.

    Hi,
    i think this has to do with the "Document Conversions Load Balancer Service".
    If you don't need the service than try to stop it:
    Start Central Administration > Operations > Services and stop the service.
    or 
    If you need it the service, try this:
    Start Central Administration > Operations > Service Account
    Change the service account to "Document Conversions Load Balancer Service" And Select a "Network Services" Click Save
    Hope this helps!
    Cheers,
    Daniel Bugday
    Web:
    SharePoint Forum
    Blog:
    Daniel Bugday's SharePoint Blog

  • Unable to connect to the report server error

    Hi all,
    I have formula.jsp file, in that i have all the parameters to connect with the Crystal Report server. I have Crystal Report Server 2008. While executing this jsp i got the following error,
    description The server encountered an internal error () that prevented it from fulfilling this request.
    exception
    org.apache.jasper.JasperException: Unable to connect to the server: 192.168.1.92. --- Connection refused: connect
         org.apache.jasper.servlet.JspServletWrapper.handleJspException(JspServletWrapper.java:512)
         org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:377)
         org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
         org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
    root cause
    javax.servlet.ServletException: Unable to connect to the server: 192.168.1.92. --- Connection refused: connect
         org.apache.jasper.runtime.PageContextImpl.doHandlePageException(PageContextImpl.java:843)
         org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:776)
         org.apache.jsp.formula_jsp._jspService(formula_jsp.java:143)
         org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
         org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:334)
         org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
         org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
    root cause
    com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException: Unable to connect to the server: 192.168.1.92. - Connection refused: connect-- Error code:-2147217387 Error code name:connectServer
         com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException.throwReportSDKServerException(Unknown Source)
         com.crystaldecisions.proxy.remoteagent.TCPIPCommunicationAdapter.connect(Unknown Source)
         com.crystaldecisions.proxy.remoteagent.z.a(Unknown Source)
         com.crystaldecisions.sdk.occa.report.application.ReportAppSession.int(Unknown Source)
         com.crystaldecisions.sdk.occa.report.application.ReportAppSession.initialize(Unknown Source)
         com.crystaldecisions.sdk.occa.report.application.ClientDocument.new(Unknown Source)
         com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.new(Unknown Source)
         com.crystaldecisions.sdk.occa.report.application.ClientDocument.open(Unknown Source)
         org.apache.jsp.formula_jsp._jspService(formula_jsp.java:93)
         org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
         org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:334)
         org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
         org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
    But, in Crystal Report Server XI Relese 2, the formula.jsp file connecting with server and display the reports.
    Why it is not working for 2008 server alone? Please help for this. If you need the jsp i will update.
    Thanks,
    shiva

    Hi,
    We are facing a similar kind of issue, when trying to access/ view crystal report using JAVA sdks.
    Please find the below error:
    com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException: Unable to connect to the server: Software caused connection abort: socket write error
    Error code:- 2147217387 Error code name: connectServer
    Please let us know if you were able to resolve this.
    Thanks in advance,
    Krishnam

  • Unable to connect to the remote server error

    Hi All,
    I am new to visual studio web development. when I try to run my application  locally it is throwing the below error. I don't know exactly but I think it is unable to access webservice on my local machine. I have turned off all firewalls. Can some one
    please help me? I would really appreciate your help. Thanks.
    ESHANI. Please click "Mark As Answer" if a post solves your problem or "Vote As Helpful" if a post has been useful to you

    Hi All,
    I am new to visual studio web development. when I try to run my application  locally it is throwing the below error. I don't know exactly but I think it is unable to access webservice on my local machine. I have turned off all firewalls. Can some one
    please help me? I would really appreciate your help. Thanks.
    ESHANI. Please click "Mark As Answer" if a post solves your problem or "Vote As Helpful" if a post has been useful to you
    Hello,
    For web development issues, you could post them in
    https://forums.asp.net forum to get help.
    Regards,
    Carl
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Possible workaround for: Launch Debugger Error "Unable to connect to the RDS server"

    I do not yet have a reproducible case for this. *Sometimes* ColdFusion Builder throws the "Unable to connect to the RDS server" error, when attempting to start a debug session against a remote server. However, "RDS Dataview" and "RDS Fileview" views correctly list the servers and their related data/file, and testing RDS connection result is "Test connection was successful". The workaround is:
    1. Login to the ColdFusion Administrator
    2. Navigate to "Debugger Settings" page (beneath "Debugging & Logging")
    3. Click on "Stop Debugger Server" -or- "Restart Debugger Server"
    4. Restart ColdFusion Application Server
    Notes:
    a) Step #3 must be done via ColdFusion Administrator, not via ColdFusion Admin API (stopLineDebugger()|restartLineDebugger())
    b) Step #4 can be done via ColdFusion Administrator -or- ColdFusion Builder
    c) Note that there is a CF9 Release Note for Bug #78488: "When a server having "Windows service option" ENABLED is added as a remote server, then Start-Stop-Restart operation cannot be done on it."  However, I've found that "Restarting" a remote server, that is running as a Windows service, is possible in ColdFusion Builder (at least this is so on standalone developer edition).  Like Bug #78488 says, I am unable to "Stop|Start" a remote server that is running as a Windows service. I'm just mentioning all of this, due to my suggestion in "b", that CF can also be restarted via ColdFusion Builder.
    It is interesting that attempts to stop|restart the debugger server, via CF Admin API, do not resolve the issue. So, it seems that the "Stop Debugger Server" and "Restart Debugger Server" buttons, in CF Admin, are doing more than calling the corresponding CF Admin API methods.
    Attached is an image of the error.
    Just posting all of this as an FYI, in case it helps anyone.
    Thanks!,
    -Aaron Neff
    (OH.. I'm unable to attach images at this time *DOH!* ..well, I'll try to remember to update this post w/ the image, once I see that attachments are allowed.)
    I'll try to describe the error message window:
    - It is 494x452 pixels
    - Title of the window is "Error occurred while launching the Debugger"
    - Body content of the window is as follows:
    Unable to connect to the RDS server 'ServerNameHere'
    Ensure that the server is currently running and that line debugging and RDS are enabled. You may also need to check your RDS connection settings in Eclipse to ensure that they are correct.
    Error Message:
    -1:Error connecting to JVM for debugging at localhost:5005. Could not attach to the VM at port 5005. You must specify this debugger port in the JVM settings of your application server, for example: -Xdebug -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=5005. You will also need to make sure that another debugger is not currently connected to the CF JVM at the same port (5005).
    Root cause ->
    Connect refused: connect

    hi,
    I have been facing the same problems while connecting to Oracle Web Conferencing and is getting error message :Unable to connect to the server. The Web COnferencing Console will now close. Please try again later. If the problem persist, contact your system administrator.
    Diagnostic report shows failed on the connectivity part
    Connectivity
    mx-direct Failed
    0:00:00.719 Connecting to web331.oracle.com:1025
    0:00:00.922 Name resolved to 148.87.108.234
    0:00:21.906 connect() failed (0x8007274C)
    0:00:21.906 Connection failed (0x8007274C)
    Pl help me to fix the problem.
    Regards
    Gobind Ahuja

  • I have windows 7 and Itunes 10.  I the the error of Unable to connect to the CDDB server when I try to get tune names

    I have windows 7 and Itunes 10.  I the the error of Unable to connect to the CDDB server when I try to get tune names.  I can still connect to iTunes store and I can still summit track names to the CDDB server.  I just cant recive the names from the CD's.  I read this problem on the community and I've checked that the  proxy server from Lan is unchecked.  I use a verizon wireless card for my internet if that matters.

    Perhaps try the iTunes Store loads partially or returns "Error 306" or "Error 10054" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
    iTunes: Advanced iTunes Store troubleshooting

  • Intermittent proxy error "There is a problem with the proxy server's security certificate. Outlook is unable to connect to the proxy server "

    Hi all,
    From time to time (at least once a day), the following message pops up on the user's screen:
    "There is a problem with the proxy server's security certificate. Outlook is unable to connect to the proxy server . Error Code 80000000)."
    If we click "OK" it goes away and everything continues to work although sometimes Outlook disconnects. It is quite annoying...
    Any ideas?
    Thank you in advance

    Hi,
    For the security alert issue, I'd like to recommend you check the name in the alert windows, and confirm if the name is in your certificate.
    Additionally, to narrow down the cause, when the Outlook client cannot connect again, I recommand you firstly check the connectivity by using Test E-mail AutoConfiguration. For more information, you can refe to the following article:
    http://social.technet.microsoft.com/Forums/en-US/54bc6b17-9b60-46a4-9dad-584836d15a02/troubleshooting-and-introduction-for-exchange-20072010-autodiscover-details-about-test-email?forum=exchangesvrgeneral
    Thanks,
    Angela Shi
    TechNet Community Support

  • AzCopy worked, suddenly stopped working, unable to connect to the remote server

    AzCopy was working fine, I was transferring about 670 files to my Azure Files storage account on "https://blah.file.core.windows.net/myshare" (that's not the real account), then it stopped after about 400 files.
    Now it continually gives the error "Error parsing destination location
    https://blah.file.core.windows.net/myshare: Unable to connect to the remote server."
    However it works from a different computer with a completely different IP address in another part of the country.
    I am 100% sure my azcopy command is correct, because it worked for about 400 files then stopped, and the exact same command no longer works.  I have tried it with both the primary and secondary keys.  I've uninstalled and reinstalled azcopy 4.1
    and that doesn't help.
    Is Azure blocking IPs somehow?  What could be wrong?

    Hi,
    I am glad to hear that you have solved your issue, thanks for posting, if you have any difficulty in future, we welcome you to post in forums again.
    Best Regards,
    Jambor
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Outlook is unable to connect to the proxy server.(Error Code 10)

    Hi,
    I had problems with RPC proxy, I was trying to setup cutover migration.
    So I read somewhere that i need to change the certprincipalname with Set-Outlookprovider.
    But after this change my outlook was not working anymore
    The settings before the change were:
    Name                          Server                        CertPrincipalName             TTL
    EXCH                                                                        
                 1
    EXPR                                                                        
                 1
    WEB                                                                          
                1
    So I set this back to the original (above) but this didn't helped...
    Outlook 2013 and Exchange 2013
    There is a problem with the proxy server's security certificate. The name on the security certificate is invalid or does not match the name of the target site mail.abc-company.com.
    Outlook is unable to connect to the proxy server.(Error Code 10)

    Hi,
    Please make sure the mail.abc-company.com is included in your Exchange certificate which has been assigned with IIS service.
    If possible, please run the following command for double check:
    Get-ExchangeCertificate | FL
    For Autodiscover service, please run
    Test E-mail AutoConfiguration to check if the connection is successful in Log tab and confirm the other services URL can use proper namespace in Results tab for request access.
    If the Autodiscover service fails, please create a SRV record with mail.abc-company.com for Autodiscover service to have a try:
    http://support2.microsoft.com/kb/940881/en-us
    Regards,
    Winnie Liang
    TechNet Community Support

  • Outlook is unable to connect to the proxy server. (Error code 0)

    Hello,
    I have just commenced a Exchange 2007 SP3 to Exchange 2013 SP1 migration following the following guide: http://blogs.technet.com/b/meamcs/archive/2013/07/25/part-1-step-by-step-exchange-2007-to-2013-migration.aspx
    As per the above guide, my 2007 environment is now known as legacy.company.com and my 2013, webmail.company.com.
    I'm using the same certificate on both boxes and it has the names autodiscover.company.com, webmail.company.com and legacy.company.com. All that seems to be working fine.
    OWA is functioning perfectly, hitting https://webmail.company.com will pass the user off to https://legacy.company.com if the mailbox is on 2007. Alongside this, Outlook also has no issues connecting to 2007 mailboxes with the client proxy settings
    being reconfigured to https://legacy.company.com automatically.
    My problem comes when a mailbox is migrated to 2013. OWA functions fine and presents the mailbox but Outlook is unable to connect, presenting the error:
    There is a problem with the proxy server's security certificate.
    The name on the security certificate is invalid or does not match the name of the target site webmail.company.com.
    Outlook is unable to connect to the proxy server. (Error Code 0)
    If I modify the Outlook client's settings and disable "Only connect to proxy servers that have this principal name in their certificate: msstd:webmail.company.com", Outlook connects and functions fine.
    I'm at a loss and have tried everything I can think and find on google. Any suggestions would be greatly appreciated.

    Hi,
    Please refer to the following article :
    http://support.microsoft.com/kb/923575
    Cause:
    This issue may occur if one or more of the following conditions are true:
    The connection to the  server requires a certification authority (CA).
    You have not trusted the certification authority at the root.
    The certificate may be invalid or revoked.
    The certificate does not match the name of the site.
    A third-party add-in is preventing access. 
    Solution:
    To examine the certificate, follow these steps:
    In Microsoft Internet Explorer, connect to the RPC server or to the secure server. For example, type
    https://www.<var>server_name</var>.com/rpc in the Address bar of the Web browser, and then press ENTER.
    Note The <var>server_name</var> placeholder references the RPC server name or the secure server name.
    Double-click the padlock icon that is located in the lower-right corner of the Web browser.
    Click the Details tab.
    Note the information in the following fields:
    Valid to
    The Valid to field indicates the date until which  the certificate is valid.
    Subject
    The data in the  Subject field should match the site name.
    Hope this helps!
    Thanks.
    Niko Cheng
    TechNet Community Support

  • We are using the Azure server for our web services. Server is generating an error "Unable to connect to the remote server". What is this error means

    We are using the Azure server for our web services. Server is generating an error "Unable to connect to the remote server". What is this error means  

    Hello,
    Did you means that you use the Windows Azure Virtual Machine DNS name as the server name in the Reporting Server Web Services URL?
    For example:
    Report server:http://uebi.cloudapp.net/reportserver
    Report manager:http://uebi.cloudapp.net/reports
    If you want to connect to Report Manager on the virtual machine from a remote computer, you should create a  virtual machine TCP Endpoint and open the port in the virtual machine’s firewall. By default, the report server listens for HTTP requests
    on port 80.
    Reference:http://msdn.microsoft.com/en-us/library/jj992719.aspx#bkmk_ssrs_connect_2_remote_RM
    Regards,
    Fanny Liu
    Fanny Liu
    TechNet Community Support

  • Unable to connect to the analysis server the server name was not found

    Hi,
    One of the user is trying to run reports from PWA 2010 and gets the below error.
    Unable to connect to the analysis server the server name was not found.Please verify the name you entered is correct and then try again.
    Errors in the ole db provider.An error occurred while loading the connection dialog boxcomponent for prompting.
    Please advice why?

    Dear Project Help,
    Please help the community with more information.
    Which kind of reports are you running? Excel using OLAP?
    If so, check out on your Excel sheet connection information to see if it's using the SSS Authentication mode:
    I'm asking this because if the failure happens with a single user, the authentication method is wrong and you should set up Secure Store Service properly.
    Let me know if you need any help on this.
    Cheers

  • SSRS 2012 with SharePoint 2010: Unable to connect to the remote server

    We had originally installed SSRS 2012 with SP 2010 and I did not like how the installation was configured, so we uninstalled everything and removed the SSRS server from the SharePoint farm and uninstalled all the SQL bits (SSRS was deployed to web tier in
    sharepoint mode).
    I've since added a new application server to host the SSRS SharePoint Mode and Installed the reporting services add-in on the WFE.   For reference, I have 1 WFE and 2 App Servers.  the WFE has the Reporting Service Add-in and both App Servers have
    the SharePoint mode of SSRS installed as described here: https://msdn.microsoft.com/en-us/library/hh479774(v=sql.110).aspx
    I've also installed the Service Application and all seems to work well up until I make an attempt to create a report or data source on the WFE.
    It looks like somewhere, the WFE is still looking to connect to the original SSRS machine we installed.  I've gone through registry, config files and the SharePoint config database to see if I can see where the reference value is.  Still can't
    find it anywhere.  None of the Reporting commandlets are helping.
    Technically what is occurring;
    Add Reporting service content types and create a New Reporting Data Source through UI
    ULS Logs go after the url: /_layouts/ReportServer/NewSharedDataSource.rsds
    Exception occurs after some time because it times out trying to connect to wrong host.  Exception below:
    Exception encountered for SOAP method GetSystemProperties: System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond <WRONG HOST IP>:80
    at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
    at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception) -
    -- End of inner exception stack trace ---
    at Microsoft.SqlServer.ReportingServices2010.RSConnection2010.SetConnectionProtocol()
    at Microsoft.SqlServer.ReportingServices2010.RSConnection2010.SoapMethodWrapper`1.ExecuteMethod(Boolean setConnectionProtocol)
    No powershell commands or any of the settings in the service application allow me to set this.  Any help would be appreciated.
    20 Bay Windows Home Server (Not Vail!)
    http://piroozjavan.blogspot.com/

    Issue an iisreset on the WFE, and validate that SSRS Service is running on the App servers.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • The WSUS administration console was unable to connect to the WSUS Server via the remote API. (Server 2k8)

    I have installed a new server for WSUS on Server 2k8, This is a stand alone server on Internet No client system is connected on this server as I have to copy these updates to my LAN which never connects to internet. (Previously I was using server 2k3. for
    online & server 2008 on my LAN , now I have changed the server for Online)
    Wsus has finished the synchronization & downloaded updates of around 67GB & its downloading more updates. The server shows me some updates are waiting to approved. but when I click the link for those updates I get following error message.
    error code is as follows -
    The WSUS administration console was unable to connect to the WSUS Server via the remote API.
    Verify that the Update Services service, IIS and SQL are running on the server. If the problem persists, try restarting IIS, SQL, and the Update Services Service.
    System.Net.WebException -- The operation has timed out
    Source
    System.Web.Services
    Stack Trace:
       at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request)
       at System.Web.Services.Protocols.HttpWebClientProtocol.GetWebResponse(WebRequest request)
       at Microsoft.UpdateServices.Internal.DatabaseAccess.ApiRemotingCompressionProxy.GetWebResponse(WebRequest webRequest)
       at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
       at Microsoft.UpdateServices.Internal.ApiRemoting.ExecuteSPSearchUpdates(String updateScopeXml, String preferredCulture, Int32 publicationState)
       at Microsoft.UpdateServices.Internal.DatabaseAccess.AdminDataAccessProxy.ExecuteSPSearchUpdates(String updateScopeXml, String preferredCulture, ExtendedPublicationState publicationState)
       at Microsoft.UpdateServices.Internal.BaseApi.Update.SearchUpdates(UpdateScope searchScope, ExtendedPublicationState publicationState, UpdateServer updateServer)
       at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetUpdates(UpdateScope searchScope)
       at Microsoft.UpdateServices.UI.AdminApiAccess.UpdateManager.GetUpdates(ExtendedUpdateScope filter)
       at Microsoft.UpdateServices.UI.AdminApiAccess.BulkUpdatePropertiesCache.GetAndCacheUpdates(ExtendedUpdateScope updateScope, ComputerTargetScope computerTargetScope)
       at Microsoft.UpdateServices.UI.SnapIn.Pages.UpdatesListPage.GetListRows()
    I Have tried desabling the firewall,disabling the antivirus protection. Tried by changing the default rule Please Help.

    Hi Sagar,
    First, please check if the RAM is exhausted. When there is not enough RAM, this issue may occurs.
    Please try to run iisreset on the WSUS server, then try to reconnect.
    Also, please try to run the server cleanup wizard to remove the unused update.
    Best Regards.
    Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Outlook is unable to connect to the proxy server.(Error Code 10) when users opened Outlook 2010

    Hi All
    Exchange Server - 2013 CU2 (Windows 2012 Standard)
    AD Server - 2003 R2 SP2
    exchange-svr01.domain.com - internal name
    mail.company.net - external name
    When users opened Outlook 2010, they will encountered
    "There is a problem with the proxy server's security certificate. The name on the security certificate is invalid or does not match the name of the target site exchange-svr01.domain.com.
    Outlook is unable to connect to the proxy server.(Error Code 10)"
    I also used the Microsoft Remote Connectivity Analyzer to test RPC/HTTP connectivity.
    The RPC/HTTP test completed successfully.
        Validating the certificate name.
         Certificate name validation failed.
         Host name company.net doesn't match any name found on the server certificate CN=AMAZONA-U59HG9G.
    Testing SSL mutual authentication with the RPC proxy server.
         The test passed with some warnings encountered.
    The certificate common name company.net doesn't match the mutual authentication string provided mail.company.net; however, a match was found in the subject alternative name extension.
     please help.

    Hi PS CL
    [PS] C:\Windows\system32>Get-OutlookAnywhere
    RunspaceId                         : c457e8aa-a0f3-4a0f-aa02-9eff24d02821
    ServerName                         : exchange-svr01
    SSLOffloading                      : True
    ExternalHostname                   : mail.company.net
    InternalHostname                   : exchange-svr01.domain.com
    ExternalClientAuthenticationMethod : Negotiate
    InternalClientAuthenticationMethod : Ntlm
    IISAuthenticationMethods           : {Basic, Ntlm, Negotiate}
    XropUrl                            :
    ExternalClientsRequireSsl          : True
    InternalClientsRequireSsl          : True
    MetabasePath                       : IIS://exchange-svr01.domain.COM/W3SVC/1/ROOT/Rpc
    Path                               : C:\Program Files\Microsoft\Exchange Server\V15\FrontEnd\HttpProxy\rpc
    ExtendedProtectionTokenChecking    : None
    ExtendedProtectionFlags            : {}
    ExtendedProtectionSPNList          : {}
    AdminDisplayVersion                : Version 15.0 (Build 712.22)
    Server                             : exchange-svr01
    AdminDisplayName                   :
    ExchangeVersion                    : 0.20 (15.0.0.0)
    Name                               : Rpc (Default Web Site)
    DistinguishedName                  : CN=Rpc (Default Web
                                         Site),CN=HTTP,CN=Protocols,CN=exchange-svr01,CN=Servers,CN=Exchange
    Administrative
                                         Group (FYDIBOHF23SPDLT),CN=Administrative
    Groups,CN=domain,CN=Microsoft
                                         Exchange,CN=Services,CN=Configuration,DC=domain,DC=COM
    Identity                           : exchange-svr01\Rpc (Default Web Site)
    Guid                               : 33c3cb74-e490-487d-844c-4072334089a1
    ObjectCategory                     : domain.COM/Configuration/Schema/ms-Exch-Rpc-Http-Virtual-Directory
    ObjectClass                        : {top, msExchVirtualDirectory, msExchRpcHttpVirtualDirectory}
    WhenChanged                        : 8/17/2013 10:14:55 AM
    WhenCreated                        : 6/25/2013 1:47:50 PM
    WhenChangedUTC                     : 8/17/2013 2:14:55 AM
    WhenCreatedUTC                     : 6/25/2013 5:47:50 AM
    OrganizationId                     :
    OriginatingServer                  : ADserver.domain.COM
    IsValid                            : True
    ObjectState                        : Changed

Maybe you are looking for

  • Do I need a router to interface with my wireless laptop and printer, or can booth tooth.

    Im having a problem interfacing the HP B210 all in one wireless printer to my ASUS wireless Laptop. Do I need a router or can I some hoe make the wireless connection using my blue tooth on my laptop. Please help.

  • Physical Standby Online Redo log  files,

    Hi, I'm trying to create a physical standby database (10.2.0.3). I'm a little confused about the requirement for online redo logs on the standby. in my standby alert log I get the following when I issue: SQL> alter database recover managed standby da

  • Use Sync Services in Java

    Hi, I have a Java application and want to sync it with an Objective-C Sync Engine. Could this cause any problems? Are there pieces of example code how to do it?

  • YouTube subscription error on my Apple TV!

    I have just finished setting up my new Apple TV. It has the latest update. I'm having an issue with YouTube on Apple TV though. Basically, I have my YouTube account set up, but when I click on my subscriptions, Apple TV gives me the following message

  • NAC L2/L3 in Datacenter

    We have 2 NAC appliance. customer wants to cover both L2 and L3 devices for posture validation. Can we have 2 NAC appliance in DC one operating in L2 mode covering L2 segments and other running in L3 mode covering branch sites? Are there any issues i