Community tab Rollover Navigation

Hi Folks,
I am interested in building a pluggable navigation scheme that takes the current SimpleLeftVertical navigation and adds a rollover event for the community tabs. The community tabs will display the associated community page links on rollover (our communities will have between 1-3 associated pages each).
Just wondering if anyone has done something similiar? If so(or not), please forward any suggestions, thoughts you have for an approach. I have read the UI Customization Guide but am a newbie to UI customization.
Thanks, Victor

You didn't mention what you want the rollovers to do. If you want to display a menu or expand a tree I suggest using a javascript menu framework. Using an already coded and debugged menu framework will save you a considerable development time. There are plenty available online and there is also one available in 5.0.2, the jscontrol menus which are used by one of the navigation scheme.
Also, be sure to use the cached CommunityInfo object when getting pages for the communities to make your navigation performant. I.e. Call the CachedOpenCommunityInfo method on the IPTCommunityManager class instead of opening a IPTCommunity object.

Similar Messages

Supressing the "Inside this Community" + Subcommunity" + "Related Community" tabs

I read the discussion thread on "How to hide the page links of a community on the 5.0.2 portal" and I looked at the UI Source code for "NavigationCommSectionDropDownView".
And I was wondering about which portion of that code should be disabled/altered to completely suppress the "Inside this Community" navigation tab along with the "subcommunity" and "related community" tabs below it.
We need to create a community that doesn't have any navigation scheme. We will create our own and need to suppress the 'out of the box' navigation scheme.
Thanks for urhelp.
Hani

The community section menu will not show up at all when Removed from a NavType. If you want it to show up for only certain communities you would not change the NavType class but instead add logic into the view's (NavigationCommSectionDropDownView or NavigationCommSectionComboBoxView located in the view folder under the NavType file) Display method to only display the menu for specific communities by checking community IDs. Instead of hardcoding the IDs in the code you could put them in NavigationSettings.xml and get them for there with the NavigationCommonHelpers.GetNavSettingsValueX methods.
Refer to the UI Customization Guide has more information.

11g Forms Tab-Page Navigation

I am using Forms 11g on Solaris.
A main navigator form opens another form which has a content canvas, tab-page canvas and (3) stacked canvases.
The problem I am having is with tab-page navigation.     CTRL+TAB ( next ) and CTRL+SHIFT+TAB ( previous )
As long as I do not initiate navigation from an item on a stacked canvas, navigation is as expected ( between tab pages only ).
However, navigating from an item within a stacked canvas causes navigation to the parent form.
Repeating the tab navigation keys from the parent form returns to the called form.
Note that both key-combinations simply toggle back and forth.
I have found no documentation on tab-page navigation so any help / insight is greatly appreciated !
Mike

Hi Soofi !
Changing block order in the called form does not affect the navigation between tab pages.
Note in my question that the resulting undesired navigation is to and from the calling form ( which only has one block ).
Navigation between items and blocks works as expected.
To reiterate -
     The only navigation that fails is when I attempt to CTRL+TAB or CTRL+SHIFT+TAB to another tab page from within an item on a stacked canvas.
     Attempting this navigation results in moving the cursor focus to the calling form.
     Repeating the attempt from the calling form moves back to the called form.
     None of your methods mention navigation between forms .
Thanks for your interest.

Forms not active in Communication tab in Customs Declaration

Hi,
The forms (Shippers Letter of Instructions, SED, COO etc) are not active and not showing up in "Communication" tab of Customs Declaration while creating a customs declaration manually from transaction /SAPSLL/CL_CUS_01.
Appreciate any help in pointing to missing configuration or activation of BAdI etc.
Followed the steps in "Communication Processes" in Customs Management in IMG
1. Action Profile:          US_CU_EX      (US: Customs Processing (Export)
No changes made
2. Action Definition:
Action Definition     Description     Sort Order
US_CU_EX_CUSEX_M_UAES2     Export Declaration Option 2 (US)     0
US_CU_EX_CUSEX_P_COO     Certificate of Origin (US)
US_CU_EX_CUSEX_P_SED     Shipper's Export Declaration (US)     0
US_CU_EX_CUSEX_P_SLI     Shipper's Letter of Instructions (US)
No changes made
3. Messages for Communication Process:
Message     Description     Message Type     Scheme
P0350     Certificate of Origin (US)     /SAPSLL/CUS_EXP     CUS_US
P0360     Shipper's Export Declaration (US)     /SAPSLL/CUS_EXP     CUS_US
P0370     Shipper's Letter of Instructions (US)     /SAPSLL/CUS_EXP     CUS_US
Assigned Scheme
4. Control Settings for Communication Process:
Process CUSEX
CUSEX     Export     Export/Dispatch     Export / Reexport
Activities:
CUSEX     Export Declaration          SED
Messages:
M0410     Export Declaration Option 2 (US)
P0130     NAFTA Certificate of Origin (NAFTA)
P0140     Export Packing List NAFTA (NAFTA)
P0350     Certificate of Origin (US)
P0360     Shipper's Export Declaration (US)
P0370     Shipper's Letter of Instructions (US)
5.Print Control for Foreign Trade Documents:
Assigned Message to Legal Unit
6. Print Profile:
Defined Print Profile (where to assign this?)
Thanks
Sreekar

Hi Venkat,
Sorry for delay in reply and thanks for helping me out on this issue. We have worked out the ADS configuration issues, set up master data for printer, set up .xdc files for printer etc. and are now able to display the forms and able to 'print preview' the forms.
However, when I print preview the form, the print icon is grayed out. I am not able to print the form. Can you please advise what am I missing?
Thanks
Sreekar

Tabs in navigation page (Tabs persistance problem)

Hello all,
I'm looking for a workaround of tab persistence (the problem in post URGENT! TAB + Folder navigation Problem )
; is it possible, somehow, to make a navigation page with tabs, and in those tabs some kind of auto-redirection to the actual pages ? Or any other way using tabs? I just want to avoid image-map style navigation. This tab persistance feature is sooo anoying...
Please help

Hello
I gave it up using tabs for navigation issue. There are too many problems with that. Now I'm using URL-items within navigation pages and that works fine...
Cheers,
Chrigel

A bug in communication tab ?

Hi,
In communication tab it shows one author and when I open the blog it shows another author. Is that a bug?
Screen shot from communication tab:
Screen shot from blog:
Regards,
Midhun VP

The blog was edited or/and re-published by G Lakshmipathi (as a moderator)
So in communication and activity tab it is showing that it is written by Lakshmipathi G
As per my experience, it's not a bug. I've seen this before.
Here is the activity tab.
You can see the blog was created yesterday (08 August), but you got the notification today.

Purchase Order ME23n - communication tab - where these values stored

Dear all
Can someone tell me where the
Purchase Order ME23n - communication tab - where these values stored
I am not able to find it.
Regards,
Venkat

Table EKKO. All fields in communication tab are available here
EKKO-IHREZ Your Reference
EKKO-VERKF Responsible Salesperson at Vendor's Office
EKKO-TELF1 Vendor's Telephone Number
EKKO-UNSEZ Our Reference

Vendor adress details(Email adrerss of other communication tab)

Hi All,
I need email addresses maintained in Other communication tab of a vendor .
I will be thankful if somebody will guide me the table or function module that will fetch other communication tab details for me.
Thanks.

You can use BAPI: BAPI_PARTNEREMPLOYEE_CREATE / Change/Delete to create/ change / delete the contact person but it is online.
Test and see if you are actually looking for this.

Customer Communication Tab details query at site level

Hi,
Can anyone please provide query to get the customer communication tab details in 11i at site level.
Regards
Dev

Hi Octavio,
Thank you for sending me this query. I am working on Customer Interface in R11i. For updating the records I need to check already existing data for a particular customer in a particular site. I am getting all the details except the communication tab details.
I am writing the below query but it is giving multiple rows and same data. Some phone numbers and email addresses are missing in the communication tab . Please correct me what mistake i am doing.
SELECT hcp.email_address,
,hcp.phone_area_code
,hcp.phone_number
,hcp.phone_extension
,hcp.phone_line_type
FROM ra_customers rc
,ra_addresses_all raa
,hz_party_relationships hpr
,hz_contact_points hcp
WHERE rc.party_id = raa.party_id
AND rc.party_id = hpr.object_id
AND hcp.owner_table_id = raa.party_site_id
AND rc.orig_system_reference = 'C100233' -- This I will get from the file for update
AND raa.orig_system_reference = 'A100961' -- This I will get from the file for update
AND hcp.orig_system_reference = '<Phone Reference>' -- This I will get from the file for update
Regards
Dev

Recently updated Contacts details of customer at the Communication tab defined at the Site level in oracle AR

Hi Expert,
Please let me know How to find out recently updated Contacts details of customer at the Communication tab defined at the Site level in oracle AR.
Thanks in advance.

Hi -
Please use the below code to get the Contacts at the Account level.
where Sold to Org id is the Customer Account Id.
SELECT hp2.person_last_name||', '||hp2.person_first_name
FROM apps.hz_parties hp,
apps.hz_parties hp2,
apps.hz_relationships hr,
apps.hz_cust_accounts hca
WHERE 1 = 1
AND hca.party_id = hp.party_id
AND hca.cust_account_id = :sold_to_org_id
AND hr.subject_id = hp.party_id
AND hr.relationship_type = 'CONTACT'
AND hp2.party_id = hr.object_id
AND hr.object_type = 'PERSON'
AND hp.party_id = hr.subject_id
Thanks
Vyaghresh
Edited by: user11990386 on Jun 20, 2011 2:33 PM

Contacts details of customer at the Communication tab defined at the Site level in oracle AR

Hi Expert,
Please tell me that how I find out recently updated Contacts details(Multiple contacts) of customer at the Communication tab defined at the Site level in oracle AR
Thanks in advance.

Hi Octavio,
Thank you for sending me this query. I am working on Customer Interface in R11i. For updating the records I need to check already existing data for a particular customer in a particular site. I am getting all the details except the communication tab details.
I am writing the below query but it is giving multiple rows and same data. Some phone numbers and email addresses are missing in the communication tab . Please correct me what mistake i am doing.
SELECT hcp.email_address,
,hcp.phone_area_code
,hcp.phone_number
,hcp.phone_extension
,hcp.phone_line_type
FROM ra_customers rc
,ra_addresses_all raa
,hz_party_relationships hpr
,hz_contact_points hcp
WHERE rc.party_id = raa.party_id
AND rc.party_id = hpr.object_id
AND hcp.owner_table_id = raa.party_site_id
AND rc.orig_system_reference = 'C100233' -- This I will get from the file for update
AND raa.orig_system_reference = 'A100961' -- This I will get from the file for update
AND hcp.orig_system_reference = '<Phone Reference>' -- This I will get from the file for update
Regards
Dev

Display community pages under active community tab in left vert nav

Hi, I'm trying to display the community pages in an "active" Comunity under the given Community tab in left vertical nav. I simply need to find out how I can access the community id from the HTMLAnchor so I can compare this community id to commP.GetCurCommunityID(). I tried calling url.GetAccessKey() and url.GetID(), these do not get current community id - both throw a NumberFormatException when I try Integer.parseInt on the String (because they return null).
This is the CListURLMediator I am looping through:
while(mediator.Next())
HTMLAnchor url = (HTMLAnchor) mediator.GetEntry();
AddBgImageListRow(table, url);
// TODO: add page links under ACTIVE community link
/*if (NavPageType.COMMUNITY == m_model.GetCurNavPageType())
CommunityNavPage commP = (CommunityNavPage) m_model.GetPageSpecificMethods();
//url.GetAccessKey() or url.GetID() do not get current community id - both throw NumberFormatException
if (commP.GetCurCommunityID() == Integer.parseInt(url.GetAccessKey()))
CypressWriteCommPagesTable(table, col, commP);
Any ideas?
Thanks, Victor

The mediators will only give you pre-built constructs with the URL. But, you can use the ICPListEntryIterator object to enumerate over it in the same way you iterate over a mediator. ICPListEntryIterator.GetEntry returns a ListEntry class, which has a GetCommunityID method.

Communication tab in PO header

*In communication tab in PO header, the fields Your reference and our reference are non editable for PO type Local PO. Is it possible to make it editable ?*
*Is it possible by customizing through SPRO or is there some development required?*
*I have checked in Service PO and STO from ME27. The fields there are editable.*

hi go through
spro-Materials Management-Purchasing-Purchase Order-Purchase Order
check the field selection key assign to your po document type
then go to Define Screen Layout at Document Level
select your field sel. key click on detail icon click on reference header data
here make setting req. entry or optional
Vipin

Regarding Tab key Navigation in a page

Hi,
I have a requirement regarding the tab key navigation on a page.
Suppose the focus is on the last field of a page, on clicking the tab key i should go to the first field in the page not the url. i tried using tab index, but the problem is that after coming back to the first field from the last field, on clicking on tab again it does not go on as usual, it suddenly jumps to the url from there.
Regards
Krishna

OK Here is what I have ...
public class MultipleEditorsPerColumnJTable extends JTable {
/** Creates a new instance of MultipleEditorsPerColumnJTable */
public MultipleEditorsPerColumnJTable( int the_column) {
this.myColumn = the_column;
this.rowEditors = new ArrayList();
setFocusTraversalKeys(KeyboardFocusManager.FORWARD_TRAVERSAL_KEYS, Collections.EMPTY_SET);
setFocusTraversalKeys(KeyboardFocusManager.BACKWARD_TRAVERSAL_KEYS, Collections.EMPTY_SET);
protected boolean processKeyBinding(KeyStroke ks, KeyEvent e,int condition, boolean pressed) {
boolean isSelected = false;
if (ks == KeyStroke.getKeyStroke(KeyEvent.VK_TAB,0)) {
int selRow = getSelectedRow();
int rowCount = getRowCount();
int selCol = getSelectedColumn();
if (selCol == 1) { isSelected= getCellEditor(selRow,selCol).stopCellEditing();}
int targetRow = (selRow + 1) % rowCount;
this.editCellAt(targetRow, 1);
this.getComponentAt(targetRow, 1).requestFocus();
return super.processKeyBinding(ks,e,condition,pressed);
I think I know why the requestFocus() is not working. OK, I have a MultipleEditorsPerColumnJTable (sub of JTale), JTextPane, JButton and JLabel. The textpane, label and button have individual editors and renderers. Each time I want to display a new Row, I re-render these components and add it to the table.
Now with the above code, it still navigates to the next component in the row/ first column in next row depending on the current column. What am I doing wrong?
Thanks,
Praveen.

Tab Style Navigation Bar for Pages in Page group

Hi
Is there a way to create a tab style navigation bar for a group of pages that will appear at the top of a page?
Regards
Harry

You might try using Language_Switcher Language Switcher while working on the English page. That might allow you to create the navbar in English.
Otherwise you could use a text based navbar like in this demo page: Text Based Navbar
OT

Community tab Rollover Navigation

Similar Messages

Maybe you are looking for