Como configuro el airport Extreme para utilizar mi Hard Disk externo?

Alguien me puede ayudar.?

06-sep-2012 0:14
Me compre un ipod classic de 160gb cada vez que trato de ponerle musica de mi disco duro externo solo copia hasta 1500 canciones y luego me congela el Itune y no lo puedo cerrar, me pide que restaure el ipod como de fabrica, lo hago y nada. Trato de cerrar el programa de itune y no me deja, trato de apagar el computador y no lo puedo apagar, he buscado para ver si tiene errores el disco del Ipod y me dice que esta bien. Lo he restaurado como 8 veces y le he puesto musica y videos pero siempre me borra todo. He aplastado Menu y Seleccion para entrar al sistemade diagnostic o del ipod y le pongo el test manual donde entro al IO y me dice q todo esta bien. Le he dado ya varios Format directamente desde el Windows 7 y nada tampoco, siempre me borra todo desde que pasan mas de 1300 canciones y me congeal todo el equipo. Ya no se que pensar de esta compania Apple porque no da ninguna solucion ha este tema.
I bought a 160gb iPod classic every time I try to put music on my external hard drive only copy up to 1500 songs and then freezes Itune me and I can not close, asks me to restore the ipod as factory, and do nothing . I try to close the program and itune will not let me, I try to turn off the computer and I can not shut, I looked to see if the iPod disk errors and says it's okay. I restored it about 8 times and I've put music and videos but I always delete everything. I crushed and Selection Menu to enter diagnostic sistemade or ipod and I put the manual test where I enter the IO and q tells me everything is fine. I have already given several Format directly from the Windows 7 and anything either, I always delete everything from passing over 1300 songs and I congeal whole team. No longer have to think of this company because Apple gives no solution has this issue.
iPod classic, Windows 7, ME BORRA TODO Y SE CONGELA

Similar Messages

AirPort Extreme Connection Failed with Hard Disk EVERYDAY!

This is getting really annoying now, I have currently three x 2TB hard drives plugged into the AirPort Extreme via a 4 Bay Enclosure.
Everyday, now and then, the connection fails. Meaning it wont let me backup and says "Couldn't find disk". And nor can I access the hard drives on the AirPort Extreme with finder, it just says Connection Failed. Nor can I open up airport utility, it says Reading Settings and then it says "input password to check settings on AirPort Extreme" so I put in the password and it loops over again.
Only way I can fix it is unplugging and pugging the AirPort Extreme back in.. WHY!!!!!!!!!?????? The AEBSn is in my basement along with the drives, it's very very very annoying. How do I fix it?
ALSO I NOTICED THAT THE INTERNET ONLY WORKS ON MY MACBOOK AIR and DOES NOT WORK ON MY WINDOWS 7 MACHINE, when this happens.

Exact same problem here. It used to really work well, Time Machine and all -- some Airport Extreme firmware revisions back. But whether it's changes to firmware or something else I don't know. It just started dropping the share point all the time and I'd have to restart or power cycle the Extreme to get it back. The shared printing to an HP Laserjet 1200 connected to the Extreme consistently works, never fails from any Mac in the house.
My solution: I gave up. I have a good high-powered hub -- the one I was using for printer and hard drive on the Extreme -- that can consistently support two externally powered USB drives. (I already have another external hard drive connected to my MacBook Air because my iTunes library finally outgrew the Air's built-in drive.) So I took the hub from the Extreme, plugged it in to the Air, connected my iTunes library hard drive and the storage/Time Machine hard drive to the hub.
Honestly, I prefer it this way. Printing works great via the Extreme USB connected printer. The network connection locally and to the Internet works great. Now Time Machine consistently works with the drive locally connected. I wouldn't even trade it for a Time Capsule because I'd still be dealing with Wi-Fi speeds. Doing a full Time Machine backup, about 107 GB, to the networked Time Machine volume took about 9 hours over pure 802.11n. Incremental backups and indexing those backups sometimes slowed my Air to a crawl. Connected via the hub to the Air the full backup took 90 minutes and incrementals I don't even notice are running. I rarely have reason to retrieve things from Time Machine, but just going into it takes like no time now. As fast or faster than starting other applications. And when I go mobile with the Air, I just eject the external hard drives and pull the hub's USB connector.
Sorry I don't have anything in the way of a real solution. But I'd long ago switched the other Macs in the house to locally connected external USB drives for Time Machine -- and nobody makes critical changes to the data on those Macs on a regular basis, anyway.
So I just got sick of pulling my hair out, I was the only one using the Airport Extreme networked drive for Time Machine or anything else. I threw in the towel. I spend two or three times the money on Macs than "comparable" Windows computers would cost me and I do that because I'm not by trade a technician. I just want to do my work, the part of it requring a computer, with no hassles. I can learn these technical troubleshooting things but that gets in the way of what I really do for work. So when I have my pricey Mac not properly connecting to my pricey Airport Extreme and I've spent hours and hours reconfiguring and trying to suss it out, I'll happily concede the battle and get back to the rest of my life.

Is it possible to use time capsule or airport extreme as a wireless hard drive for iphone?

Is it possible to use time capsule or airport extreme as a wireless hard drive for iphone.
I would like to strem movies from the hard drive to iphone.
I have already seen the Goflex Stellite, which works this way.
Is there any other device that could do this?

I did a typo. My current computer is a 2010 1/2 iMac. The stand alone monitors are still out of my price range so I'm looking for other options. By buying an external hard drive and a broken iMac, I'm still ahead. Still, if I understand you right, the 27" 2010 and earlier iMacs would be possiblities.
Are there adapters that would allow me to run a 2011 and newer iMac as an external monitor from my 2010 1/2. There are so many adapters out there these days.

Airport Extreme and connecting a hard drive

Hello All,
Thank you ahead of time for your help! I have a couple of questions regarding the set up of my airport extreme and an external hard drive.
What I want to accomplish is using the airport extreme to ONLY share a hard drive for backup and sharing other files through out the house. My housemates already have the internet going through their router, so there is for the airport extreme. Can a macbook pro (13in intel) receive two wireless signals, one that is the internet and the other from my airport extreme (that shares my hard drive)? If so, how is this done?
Any assistance would be more that appreciated!!
Thanks!!

Hello njoza. Welcome to the Apple Discussions!
The simplest way to accomplish this would be to connect the 802.11n AirPort Extreme Base Station (AEBSn) to the Internet router by Ethernet; reconfigure the AEBSn as a bridge, and disable its wireless radios.
In this configuration, you can still share out the hard drive and only need to connect to the Internet router's wireless network for both drive & Internet access.

Airport extreme working with external hard drive via USB port adaptor :)

Hi Everyone. I hope this post will be helpful because I have been very frustrated with apple and their customer support and I figured this out on my own by reading all of the discussions and playing with my settings but it took me a while...
I recently for school bought all apple products and I have non-mac products as well. I bought the airport extreme believing I could hook up all of my computers through it and share the printers and my mybook external hard drive with my husbands desktop and the other lap tops. Unfortunately this was not as easy as advertised...
I was not able to successfully have both computers stay connected to the printers so I have to have mine for my laptop connected via the airport extreme and my husband has his desktop connected to a different printer via a ethernet cable. It would work at set up and then a few hours later not print anymore and reinstalling the drivers just confused it... if anyone knows a solution for this please let me know. It worked wirelessly for me but not for him.
As far as the external drive for the airport extreme goes I went and bought an additional USB port hub so I could access my printer wirelessly and my external hard drive as well for time machine back ups.
I set up my external hard drive so that it will save files from both a mac and a non-mac computer and we can both access it (not sure if that matters in the solution or problem for others); however, the desktop (non-mac) was able to by clicking and dragging files to it assess the hard drive and utilize it and my macbook was not able to because the airport extreme showed the drive under disks but when I tried to access it through time machine it was not there. I played with this for a long time and finally figured it out.
I believe I went under finder, then chose go from the menu bar, then chose connect to server and the default for it is afp://10.0.1.1.. You enter this in under server address and you may be prompted to give your password. The password was tricky as well because it showed my computers user name and I thought it would want that password but instead it wanted the password to log into my internet or my airport extreme's password. Once I put this in I was able to open my time machine preferences, finally choose the mybook external hard drive that was now showing up, choose it and my computer is currently doing a back up as I type without the error message of failed, unable to locate volume, or any others.
Hope this posting was helpful and not to confusing and feel free to message me if you need clarification and think this may solve your problem as well. GOOD LUCK!

Seems to me you should have done your homework setting up your network and not assuming that any third party device you choose to use would work without problems.

Can Time Capsule backup an Airport Extreme's attached USB hard drive?

Can Time Capsule backup an Airport Extreme's attached USB hard drive (without currently being attached to a MAC OSX LION system)?

No, sorry.. there is no way for the TC to see the files.. and even if you plug the hard disk into the TC there is no mechanism in the TC to drag the files to itself.. The TC is absolutely a dumb network attached drive.. everything you want to do must be done from a computer.

Airport Extreme doesn't recognize USB disk

I have a USB external hard drive that I've used for a number of years plugged directly into my Mac mini. I'm trying to move it to the Airport Extreme as a shared hard drive, but the device is not recognizing it. It won't show up in my Finder sidebar, nor will it appear in Airport Utility in the list of disks.
For contrast, I've got another drive that shows up fine whenever I plug it in.
Things I've tried:
- A USB hub plugged into the Airport Extreme. If I plug both disks into the hub, the second one works just fine, while the first still won't appear in the Finder, and in Airport Utility it is displayed as a "0MB" capacity drive with no volumes. If I don't plug in the second disk, I don't think the first disk shows up at all.
- Different USB cable. Same result.
- Reformat the drive (via Disk Utility, as "Mac OS Extended (Journaled)"). Same result.
- Rollback the firmware. Currently at 7.6. I tried 7.5.2 and 7.4.1. Same result.
Any ideas?

Some older drives just won't work at a network USB location....probably a firmware limitation on the drive electronics.
Check to see if the firmware on the hard drive can be updated.
If you have checked your powered USB hub to verify that all ports are functional, and checked USB cables, I think you have to conclude that you....like me in the past....have found a drive just won't work where you want it to.

Airport express como repetidor de Airport Extreme

Tengo una red Airport con un Airport Extreme de 5ta generacion. (802.11n) y funciona perfectamente. Pero tengo un airport express bien antiguo, con firmware version 6.3 que es solo 802.11g y no logro configurarlo como repetidor de mi red Wi-Fi. Sigo todas las instrucciones y aparentemente queda todo OK, pero no esta repitiendo.
El Airport Extreme ya esta configurado para permitir la ampliacion de red. Todo aparece correcto. Estaba pensando que quizas no funciona porque el Extreme es 802.11n y el Express es solo 802.11g.
El airport express lo estoy configurando con la Utilidad Airport version 5.6, pues ya no tiene soporte con la ultima version de la Utilidad Airport.
¿que estará pasando?
Gracias
Sandra Perez

Tengo una red Airport con un Airport Extreme de 5ta generacion. (802.11n) y funciona perfectamente. Pero tengo un airport express bien antiguo, con firmware version 6.3 que es solo 802.11g y no logro configurarlo como repetidor de mi red Wi-Fi. Sigo todas las instrucciones y aparentemente queda todo OK, pero no esta repitiendo.
El Airport Extreme ya esta configurado para permitir la ampliacion de red. Todo aparece correcto. Estaba pensando que quizas no funciona porque el Extreme es 802.11n y el Express es solo 802.11g.
El airport express lo estoy configurando con la Utilidad Airport version 5.6, pues ya no tiene soporte con la ultima version de la Utilidad Airport.
¿que estará pasando?
Gracias
Sandra Perez

Alguien sabe como configuro mi apple tv para audio optico

Buenas
hace unos dias compre mi ATV3 y al conectarlo me doy cuenta de que no puedo hacer que la salida de audio optica de audio a un equipo de sonido, y solo lo puedo hacer desde la tv.
Alguien puede decirme como conecto el audio optico para poder solo escuchar musica directamente al equipode sonido.
Saludos

No puedo asesorar sobre la instalación de cine en casa.
1. Asegúrese de que haya reproducción de sonido en el Apple TV y película a través de las entradas HDMI en cine en casa.
2. intentar es quitar el cable HDMI por lo que sólo óptico está conectado.

My airport extreme no longer recognizes hard drives attached to it. I'm running Mac OS Lion on a Macbook Pro. Any ideas?

I have a 5th generation Airport Extreme. I recently upgrade my Macbook Pro to Lion and then went on vacation. I checked all my hard drives when I returned and my Airport extreme is no longer recognizing my hard drives. I have two WD mac-formatted HDs connected to the airport extreme via an AC/DC powered 4 port USB hub. Both hard drives work fine when they are connected to my computer and light up when connected to the USB hub connected to the Airport extreme. I've reset the airport to factory settings and tried reconfiguring it, but that didn't work. I'm hoping I can get some help from you guys. Thanks!
Brandon

I suggest you post this issue on the iTunes forum. You will have an audience that is oriented specifically towards this application.
Ciao.

AirPort Extreme and shared USB Hard Drive

I received an AirPort Extreme for Christmas with the intent of using it to share a network Hard Drive and Printer between the multiple machines on our home network. I've finally gotten it set up with Bonjour on the PC's, and the AirPort Utility on all machines. It's connected via ethernet cable to a Dell PC, and wirelessly to an iMac, a Dell Laptop, my iPhone and a PS3. Internet functionality is great for all devices.
My next step was to connect a Seagate 750GB External USB Hard Drive to the APE. This drive was previously connected to the Dell PC, and was formatted as NTFS. I went through the hassle of converting it to FAT32, I connected it to the router, and both Dell's and the iMac can see the drive. I haven't checked if the PS3 can see it yet, but since I haven't found Bonjour for the PS3, I'm not holding my breath. The iPhone - well, mine isn't jailbroken at the moment.
A few quick hints I learned from doing a lot of web surfing and trial-and-error. These could save people a LOT of time...
+ Don't format a external drive as either an Apple Drive (HFS+) or as a Windows Drive (NTFS) if you plan on using data off it on both a Mac and a PC. Windows won't read HFS+ without a converter, APE won't accept NTFS. It needs to be FAT32 as this is nearly universal.
+ Windows will only format a maximum of 32GB as FAT32. It's a stupid limit, and you have to jump hoops to get it to do a larger drive size.
+ Use the Disk Utility on the Mac to erase the drive and reformat it as an MS-DOS partition. It will work up to a drive of about 2TB according to what I've read. On the Mac, MS-DOS partition = FAT32, and it formatted my 750GB drive as a single 750GB partition.
Now, I've begun the task of copying all our media to the drive. Copied a few pictures, no problem. Copied a few MP3's, no problem. Where the problems start is in trying to copy movies to the drive. We have ripped most of our DVD's to DivX / H.264, to keep the kids from destroying the DVD's (trust me, DVD's scratch EASY in the hands of a 5-year old). So I have about 50 movies to transfer, each around 1GB in size.
Each time I try to transfer a movie to the drive, I get an error "*Error Copying File or Folder*" which displays the message "*Cannot copy BlahBlahBlah: The specified network name is no longer available.*" This also results in the HDD becoming unavailable to the other machines on the network. I've had to un-plug and then re-plug the APE a few times to get the HDD to work again. Sometimes, the copy actually does work, even though I get this message. I know the easy work-around is to connect the HDD directly to the PC with the files on it and transfer them that way, but I shouldn't have to do that - it should just work.
I'm wondering if anyone else has any kind of a similar experience? It appears that I can stream music and video from the drive easily enough, it's the writing to the drive that seems to be the issue. Thanks in advance...
Best Regards,
Jeff

I would think you would have better luck formatting it as HFS+ (Macintosh Extended File System). You'll still be able to see it from your non-Mac PCs.
http://discussions.apple.com/message.jspa?messageID=6370006#6370006

Why won't my new Airport Extreme recognize my USB Hard drive? My MacBook recognizes it. I already have had a great deal of trouble connecting my printer to print wirelessly, but finally resolved that. Now I want to add the external drive with a USB por

Why won't my new Airport Extreme recognize my USB external hard drive. I put a USB port on the base station, and the system recognizes my printer. When I click on disks - it lists my printer, and when I click on Printers it lists my printer. What do I need to do to get it to recognize the external drive? BTW, the MacBook recognizes it, no problem. I have erased it and reformatted it. I am running the new Lion OS. Any help is appreciated.

Yes, I saw a post on one of these threads about a powered USB hub so I ran over to Office Depot and picked one up. I was finally able to see the HD in the Airport Utility. Yay!

I am attempting to connect an external hard drive to my airport extreme and see this hard drive under time machine preferences. I used to able to do this under Leopard, but no longer under lion, even after downloading Airport utility 5.6.

Hi, I am attempting to see my extrenal hard drive, connected to my airport extreme base station, in time machine. I formatted the disk, backed up my mackbook pro to it via usb, and now want to be able to backup over wifi with my disk connected to my airport extreme base station. I spoke with Apple Care, and they told me Apple doens't support this. I used to be able to do this with my older MB pro and under older osx's. I do see the external hard drive connected under disks, just not in time machine preferences. Is there a workaround available that anyone is aware of?
Thank you so much,
Tabeer

Can i use time machine with a airport extreme and a external hard drive

I have connected a hard drive to my airport extreme.
Now i would like to use time machine to back up my computers, and would like to do this on the hard drive which is connected to my airport extreme.
Next step is that i would like to be able to approach my external hard drive via the internet.
Is this possible or not?

Both are possible. However, Apple does NOT support Time Machine backups to AirPort Disks attached to the 802.11n AirPort Extreme Base Station (AEBSn). Doing so will potentially lead to data corruption and is highly not recommended. Please check out this excellent Pondini article for more details. This article also provides the Apple Support references that states Apple's position. Bottom line? If your backups are critical to you, then you may want to rethink your backup solution.
As far as accessing the AirPort Disk from the Internet, the following is the basic steps to do so:
Start the AirPort Utility > Select the AEBSn, and then, note the IP address shown.
Select Manual Setup.
Verify that Connection Sharing = Share a public IP address is selected on the Internet > Internet Connection tab.
Select Disks, and then, select File Sharing.
Verify that both the "Enable file sharing" and "Share disks over WAN" options are enabled.
Verify that Secure Shared Disks = With a disk password. (Recommended)
Verify that AirPort Disks Guest Access = Not allowed. (Recommended)
Select Advanced, and then, select the Port Mapping tab.
Click the plus sign to add a new port mapping.
For Service, select the "Personal File Sharing" option. (Note: This option would only allow Mac clients to access the AirPort Disks. If you want both Macs and PCs to connect, you would need to leave this field at its default value and enter the appropriate SMB ports to the mix of ports to be opened.)
In the Public UDP Port(s) and Public TCP Port(s) boxes, type in a 4-digit port number (e.g., 8888) that you choose. In the Private IP Address box, type the internal IP address of your AEBSn that you wrote down in step 1. In the Private UDP Port(s) and Private TCP Port(s) boxes, type 548. Click Continue.
In the Description box, type a descriptive name like "AirPort Disk File Sharing," and then, click Done.
Click on Update.
To connect to the shared AirPort Disk from a remote location using a Mac:
From the Finder > Go > Connect to Server.
Enter the Pubic (WAN-side) IP address of the AEBSn, followed by a colon and the Public port number that you choose in step 11 of the previous procedure. For example: afp://www.mydyndnsdomain.com:8888 or afp://123.456.789.123:8888
Click Connect.
You should be prompted for your user name and password. The user name can be anything you like; the password should be the Disk password for the AEBSn that you created in step 6 previously.
Click Connect.

Airport Extreme 802.11n sharing a disk with a -1 on the mount point

First I have to reboot the device once a day because of the disk that disconnect for no reason like many other on the list ever since I upgraded to 7.2.1 but not sure that as to do with this problem.
Here's is the deal, I have an Airport Extreme 802.11n with a 500GB shared on the USB port. I want to use my iPhoto Library on the 500GB. It's about 11GB, I have tranfered the library over and iPhoto is asking to choose the library I want to use. When I try to point it to the 500GB everything is greyed out. When I use a terminal and do a df command to show the mount point on my computer, I get
/Volumes/500GB-1
Why and where the -1 is coming from?
How can I get /Volumes/500GB only?
One thing I have noticed about the -1 is when I loose the disk connection it prompt me to disconnect 500GB-1 but sometime even with a -2 and -3.
Thx!

can I hook up my printer, scanner and external harddrive through a usb hub?
Partially, a large number of USB printers will work with the AirPort Base Stations' USB port, but not all. I suggest that you checkout the following iFelix site to see if your printer is compatible. Similiarly, most external USB hard drives should work as well.
However, devices that rely on two-way communications, like copiers and scanners, won't work when connected to the USB port.

Como configuro el airport Extreme para utilizar mi Hard Disk externo?

Similar Messages

Maybe you are looking for