Como deixar padrao formatação de entrega e recebimento HTML

Gostaria que quando fosse manda uma nova mensagem a opção de formato de entrega já esteja em HTML e não em Selecionar Automaticamente.
Também quando recebo os e-mails me parece que não esta em formato HTML
grato
Lindomar

*Para padronizar o formato de recebimento como HTML, vá em '''Exibir''' >> '''Formatação da mensagem como''' >> selecione '''Formato original HTML'''.
*Para padronizar o envio, use este complemento [https://addons.mozilla.org/thunderbird/addon/outgoing-message-format/ Outgoing Message Format], após instalar basta definir o formato.
*[[Perguntas frequentes sobre complementos e extensões]]

Similar Messages

Messy format exporting to excel and text/html

Need help please....i'm in the middle of problems, i'm developing application that can exporting reports to some formats like pdf, excel, and text/html. it is become a problem when i exporting it to excel or text/html, the format are so messy... I'm using POI library 2.0 when exporting to excel. My codes are simply like this :
try {
response.setContentType(type);
if ("application/vnd.ms-excel".equals(type)) {
exporter = new JRXlsExporter();
exporter.setParameter(JRXlsExporterParameter.JASPER_PRINT,jasperPrint);
exporter.setParameter(JRXlsExporterParameter.OUTPUT_STREAM,response.getOutputStream());
else if ("text/html".equals(type)) {
exporter = new JRHtmlExporter();
exporter.setParameter(JRExporterParameter.JASPER_PRINT,
jasperPrint);
exporter.setParameter(JRExporterParameter.OUTPUT_WRITER,response.getWriter());
is it just because the library? or i have to add some additional code before jasper reports execute it? thanks a lot for the answers....
Message was edited by:
darma_sadha
Message was edited by:
darma_sadha
Message was edited by:
darma_sadha

First, you forgot to tell what the problem is. Second: this is not a Jakarta product support forum. POI has a mailing list of its own. Go ask them.

Como deixar a foto dos contatos em tamanho grande?

Bom dia!
Comprei um iphone 4s e adicionei fotos a contatos, só que quando recebo ligações as fotos aparecem em miniatura no canto superior direito. Como faço para deixar as fotos em tamanho grande? Desde já agradeço!

Infelizmente não é só o youtube que usa flash e não são todos sites que suportam HTML5, e quando o flash está desabilitado o maximo de resolução é 780p;
Gosto muito do navegador, mas pra usa-lo em telas touch para assistir vídeos na minha resolução fica difícil tocar nos botões de players, infelizmente para esse fim estou tendo que usar outros navegadores.
Eu não sei se o que define os tamanhos dos botões é o próprio plug-in ou o navegador. como eu disse minhas configurações estão para aumentar em 150% o tamanho dos itens mas os botões dos vídeos não aumentam.

Como deixar os plugins permitidos permanentemente ?

Eu uso os plugins do java e o shockwave. E eles sempre bloqueiam tenho que ir lá e dar
"permitir e memorizar" e então fica tudo certo. Até eu ter que limpar o cache tem alguma forma que eu possa fazer que deixe permitido mesmo que eu limpe o cache, apague tudo pelo ctrl+shift+del e eles continuem permitidos.
Não me importo se liberar todos os plugins mas de preferência só liberaria esses.

Estranho isso estar acontecendo,
Tente ir no about:config:
# Na [[Location bar autocomplete|barra de endereços]], escreva '''about:config''' e pressione '''Enter'''. É possível que o aviso ''''Isso pode anular a garantia!'''' apareça.
# Clique no botão '''Serei cuidadoso, prometo!''', para acessar a página about:config.
No campo localizar procure por "plugin.default.state" (todos os plugins), na campo abaixo esta opção sera exibida, clique duas vezes sobre ela ou com o botão direito e clique em editar... mude o valor para 2(sempre ativar)
0 - Nunca ativar
1 - Sempre ativar
2 - Perguntar (Padrão)
Para ativar individualmente o java procure essa opção "plugin.state.java" e atribua valor 1
Para ativar individualmente o flash use esta opção "plugin.state.flash" atribua valor 1
Caso o problema persista:
*[https://support.mozilla.org/pt-BR/kb/como-ajustar-preferencias-que-nao-sao-salvas?esab=a&s=preferencias+n%C3%A3o+salvas&r=2&as=s Como ajustar preferências que não são salvas]

Como deixar a codificação padrão "iso-8859-1" ao invés de "utf-8" no navegador?

Quando faço o acesso ao banco do meu cartão de crédito, a primeira pagina deles é codificada com "UTF-8" e também existe o comando "charset=utf-8" no código HTML, após digitar o número do cartão, ele direciona para outra página, porém codificada com "iso-8859-1", mas sem nenhuma codificação no código HTML.
Identifiquei que o navegador usa por padrão o "utf-8" quando não existe codificação no código HTML, então gostaria de modificar esse padrão para "iso-8859-1".
O único lugar que encontrei para essa codificação foi ao pressionar o botão de avançado em "Fontes e cores", porém não funcionou.
A versão do meu navegado é 23.0.1, entretanto desde a versão 18 que encontro esse problema.

It is possible that the server sends the file(s) by default with UTF-8 and in such a case this encoding send by the server prevails over all other settings.
You can see the encoding here: Tools > Page Info > General
*Press the F10 key or tap the Alt key to bring up the hidden "Menu Bar" temporarily.

How to get custom formating to show in export as HTML CS4

Using a copy of CS4, I am exporting an indesign document that has custom formated words. That is some words are italicized and don't conform to the paragraph style (I have to do this as I get all my documents from Microsoft Word Files). The italicized text shows up as a paragraph style such as "BodyText+" where the normal text is "BodyText". Manually applying a character style to all the italicized text would be impossible.
How can I export as html in this case? Is there a way to format all BodyText+ with a special character style?

Well I guess the find/replace all seems to have set the character styles in the InDesign document, but, it makes no difference in the html output
It still looks like nonitalics italics.
Does anybody know how to make it do something like this:
nonitalics italics ?
I can write the post processing stuff as long as it somehow notes the difference

[RB 6i] Format text in the field using HTML-tags. Or another way...

If some fields of tables in database contain html tags such as 'H2O' (here is html tag 'sub') or 'sometext'(here is html tag 'b') how can I to make Report Builder 6i to understand these tags or at least don't show them?
Or how in another way can I format a part of text inside the field?
thanx before
Max

Hi Maxim,
If the output is PDF, the only way is to filter the incoming values yourself. You will need to create a PL/SQL column and remove the HTML markup tags. This, of course, leaves you without attributes you wanted in text (ie: the no "Bold" characters). You can still do this in with the same report basing the output from the PL/SQl formula column on the "desformat" input parameter.
Reports doesn't have any "markup" capability. ie: A field only has one font & one colour. You can have multiple fonts for boilerplate text but, again, only a single colour.
Robin.

Formating body in email activity to HTML

Hi,
I am trying to create a table with dynamic values using email acitivity in BPEL. Iam using 11.1.1.6.0 with PS5.
Could anyone share the step by step sample process to achive HTML formatting in email, which can be used for the above use case?
Thanks,
Naveen Kumartalari

ARe you using the Email service or using the Process Management email?
If you are using the Email service, in the Receive operation, there is a property called Body (HTML) that allows you to save the HTML code as a string value.
http://help.stage.adobe.com/en_US/enterpriseplatform/10.0/WorkbenchHelp/WS92d06802c76abadb -7744acc912826be985b-8000.html

What video format is supported when creating a HTML widget?

It doesn't support mp4, m4v amd mov. I tried video/mp4, video/m4v and video/quicktime, they don't work. Anything wrong with the following code. Pls help. Thanks.
<video id="sourcevid" autoplay="true" loop="true">
<source src="00048.mp4" type="video/mp4" />
</video>

Thanks for the tip, Rycankun. I just tried changing my m4v ext to mp4 and the video worked just great in an HTML widget with a HTML5 video tag. The video opens in a new page the same way any html widget does with the video centered on the page -- just what we were looking for.
I commented on your other post about HTML widget and left some additional info on encoding videos so I thought I'd paste that same info here as it's more relevant to this thread:
A few thoughts about encoding -- we started out using the documented Quicktime 10 > Export > Format iPod touch & iPhone 3GS but there's no control over the video/audio compression settings. We then went to Compressor and used a modified version of the SD or HD preset for Apple devices - had more control but still weren't able to get the files as small as we needed at the quality we desired. We finally have settled on using Handbrake to create our mp4 using the iPhone & iPod Touch preset and adjusting the Constant bitrate RF value and audio settings to get the quality we desired. The resulting mp4 is not directly useable in iBA but it's easy to convert the mp4 container to a m4v contrainer using Subler (for Mac) to transcode to Main @ 3.1 profile. Transcoding with Subler doesn't re-encode the video or audio - those tracks just pass through and Subler converts the movie container to the selected Main @ 3.1 profile. There's probably a way to create the m4v directly from Handbrake with Main @ 3.1 profile but so far the closest I've gotten is Baseline @ 3. Anybody have any thoughts on this?

Formating of o/p to proper HTML format

Hi All,
I have aprogram which generates an o/p and send it as an attchment via mail in HTML format using FM.
However the o/p doesn't look well formated. I want to format it.
Current o/p format is -
Job Name Job Creator Status Delay Duration Sched.start date Sched.start time Start Date Start Time End Date End Time Executing Server SAP_REORG_XMILOG MSAMPSON A 000048 000000 20100819 000100 20100819 000148 20100819 000148 norddev_NRD_00
I want to format it to
Job Name Job Creator Status Delay Duration Sched.start date Sched.start time
Server SAP_REORG_XMILOG MSAMPSON A 000048 00000 20100819 000100
Kindly help me with your expertise!!!
Thanks
Reshma

IS your requirement adding a line in your format?
Try checking out the function module and see what tags they use and how they implement....
Regards,
Lalit Mohan Gupta.

Issue in Bi publisher report format

Hi we are generating OIM reports in BI publisher we have generated template for report in rtf format from bi publisher itself.
We have edited that template to add some details on top of column.Now if we generate report using pdf format this detail above column is at its right place.But if we change the format from pdf to excel or html the detail get shifted from its original position.
Any help on this............

Please post this issue in BI section
Business Intelligence Suite Enterprise Edition

How to broadcast reports in pdf format

Hello Experts,
I am running reports on the web and I need to broadcast report via email in the pdf format. I do not see the option of pdf at all in the braodcasting tabl. Here's what I am doing. I right click on the report and click Broadcast -and Export > Broadcast E-mail -> Information Broadcasting tab -> Settings query -> choose the query i want to broadcast -> select the option broadcast e-mail and when I select the output format , it only shows me MHTML, HTML and Online Link to Current Data. But it does not show me the pdf option. We do have the free pdf connected to the sap server. Please let me know what I should do to get it in the pdf format.
Thanks
Sruthi

Hello,
There are two possible reasons for this issue:
1st:
You are using the old BExBroadcaster.
ONLY BExBroadcaster 7.0 is able to broadcast on PDF format.
2nd:
If you are already using BExBroadcaster 7.0, the PDF output format is suppressed.
You can manage this on the following table:
> RSRD_OUTFORM
Check this table and remove the FLAG 'x' on SUPRESS column of PDF OUTFORM.
Best Regards,
Edward John

Report is not displayed in xml format.

Hi,
We have a test station based in teststand 4.1 and labview 8.6 code modules.
From one day to another, the xml report is blank, no character is displayed. That in Operator interface or sequence file execution in teststand editor.If the report format is changed to ASCII or HTML, then runs OK.
The first step taken was to reload the directories "Cfg\*.ini" and "teststandmodels\Stylesheets\*.xls" from another test station that runs ok. Not solved.
The second option was to uninstall and reinstall teststand. Also not solved the problem. Then I suposse that this problem is caused for a file or parameter that is not dependent of Teststand, but I don't really know.
Any suggestions would be appreciated.
Regards,
Bergidum.

Thanks for your help Sendia,
Yes, I have already tried Computer mother test and all type of reporting options. Only ASCII and and HTML report formats generate visible results.
Also on-the-fly-reporting is my option by default.
Before format and reinstall the operating system (windows XP) and reinstall the NI package, I would like to know the origin of the malfunction because there are other five test stations working properly, but if the same problem appears in a new station, then to know the solution.
Thanks for your attention,
Bierzo.

Reading in HTML file then writing to file - losing formatting.

I am reading in a HTML file using a Buffered Reader then writing it to a file. However when i write it to a file using
out = new PrintWriter(new BufferedWriter(new FileWriter(path, true)));
out.write(content);
out.flush();
i seem to lose all carriage returns and find that the whole html is on one single line with the only noticable formatting being the spaces between the html tags.
How can i stop it losing carriage returns?

You only showed the part where you are writing it out.
Does your reader code look like this:
BufferedReader r = ...
String content = "";
while (true) {
    String line = r.readLine();
    if (line == null) break;
    content += line;
}If it does, the problem lies here, as doing a readLine removes the line terminator. Soooo....
    content += line + "\n";Of course, to be most efficient and good, don't use String concatenation, use a StringBuffer (though it should be noted that when I decompiled this test code, suns compiler did indeed use a StringBuffer).
When you print, use the PrintWriter methods print and priintln as they don't throw exceptions.

Does anyone know how to format a Toshiba 1.5 TB canvio portable hard drive for macOS10

Hi
I have just bought a Toshiba 1.5TB Canvio portable hard drive. It needs sto be formatted for Mac (OS10.5). I was told to go to disk utility, format using FAT32.
In disk utility - erase there is an option MS_DOS(FAT). Is this what I use?
Thanks

pamelarandwick wrote:
... It needs sto be formatted for Mac ...
Usually if you are Only intend to use it with a Mac it should be Formatted Mac OS Extended (journaled)
More Info here on Formats > http://pondini.org/OSX/DU8.html
To Format the Drive using Disc Utility... See Here...
http://pondini.org/OSX/DU1.html
From Pondinis Excellent Information here...
http://pondini.org/OSX/DU.html

Como deixar padrao formatação de entrega e recebimento HTML

Similar Messages

Maybe you are looking for