Como inicio boot camp con disco windows 8
no logro iniciar boot camp. no hace la partición. al darle a iniciar no funciona
Hola,
si mantiene la tecla alt en el arranque, lo que muestra como opciones de arranque?
Similar Messages
-
Using Boot Camp to install Windows XP: problems with display going blank
I have a new Mac mini (early 2009) connected to an older NEC MultiSync LCD (VGA only) display through a KVM.
I initially used the Apple Mini DisplayPort to VGA adapter to make the display connection.
All worked fine with Mac OS X, but when I attempted to use Boot Camp to install Windows XP (Home), the display would go blank with the display saying "no signal" at some point during the install and I couldn't get the mini's display back without power cycling the mini. Numerous attempts at removing the Boot Camp partition, re-partitioning, and retrying resulted in nothing but frustration. I typically had to force the mini to boot from the OS X install DVD or Mac partition to make the mini usable again.
I have used my LCD display and KVM combination with a variety of computers running a variety of operating systems, including older Mac minis running both Mac OS X and XP, with no problems. And I intend to keep using it, so I wasn't going to assume the problem was there!
After noting that Apple had already released a [firmware update|http://support.apple.com/downloads/Mini_DisplayPort_to_VGA_FirmwareUpdate] for this adapter to address "[possible intermittent flickering and compatibility issues|http://support.apple.com/kb/HT3492]", I double checked that it was up to date--and it was. But, it made me suspicious that this adapter might have some more problems and be the source of the troubles I was experiencing.
So, I got an Apple Mini-DVI to VGA adapter and tried that.
No more display problems! Everything works fine with Mac OS X. Windows XP installed without so much as a flicker, and it works smoothly with my setup.
I'm curious if I'm the only one who was affected by this problem?Restart your Mac while holding down the Alt/Option-key until you get to the Boot Selection Screen.
Choose to boot OSX.
Use the BootCamp Assistant to remove the Windows partition.
Go to System Preferences then Startup Volume and rest the default to be your OSX volume.
Reboot your Mac again.
Follow the instructions from here http://support.apple.com/kb/TS3173 and use the BootCamp Assistant again to install Windows 7
Stefan -
HT3777 How to install Boot Camp on 32bit Windows 8 on a 2011 MacBook Pro?
I used Boot Camp to install Windows 8 Consumer Preview as the 2nd OS on my 2011 MacBook Pro. However after the installation I cannot install the additional Boot Camp just the drivers for webcam/wifi/ethernet/cardreader/display/chipset etc.
But I would like to be able to use the function keys to adjust the brightness and volume like on a normal laptop without having to go through settings.
Anyone know how?You need to install the Boot Camp Windows Support Software, but I have no idea which version of OSX you have so, if 10.6.x the software is on the OSX install disk, likewise for 10.5.x, if you are running 10.7.x (lion) it is a download from the Boot Camp Assistant.
-
hey, I want to install windows on my mac, I have mac osx lion and I'm soon going to get mountain lion. If I use Boot camp to install windows do I need a windows disc, will i lose all my data, etc. If so how to I save them. Can I switch back to osx after I install windows. ( can I switch between Windows and OS X as many times as I want.) thanks for answering.
Sebastianhey, I want to install windows on my mac, I have mac osx lion and I'm soon going to get mountain lion. If I use Boot camp to install windows do I need a windows disc, will i lose all my data, etc. If so how to I save them. Can I switch back to osx after I install windows. ( can I switch between Windows and OS X as many times as I want.) thanks for answering.
Sebastian -
When there will be a new boot camp version with Windows 8.1 support? I a floor of year can't already update Windows 8 on the iMac! ! !
Welcome to Apple Support Communities
Boot Camp Support Software 5.0.5033 supports Windows 8.1 and can be used with that version. The Mid 2011 iMac is compatible with Windows 8, so you should not have any problem by installing Windows 8.
Follow Apple's steps > http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf -
Bootcamp rejects the ISO file made from a windows 8.1 disc with the error message "Boot Camp only supports Windows 7 or later installation on this platform. Please use an ISO file for Windows 7 or later installation."
How do I get past this?Hi Loner T
No the ISO is just 64bit. I bought a shrink wrapped copy of 8.1 full version. It has two discs, one for 32bit and one for 64bit. I used the 64bit disc.
I inserted it in an older iMac that has a dvd drive, and shared that across to my new iMac. I used disc utility to create a disc image following instructions I found here...
Boot Camp: Creating an ISO image from a Windows installation DVD - Apple Support
This created an ISO file. I then went into bootcamp but when I tried to use the ISO file to create a boot USB it failed with the error above.
Regards
Ian -
I Mini with an i7 processor. I would like to use Boot Camp to install windows based CAD software on my MAC. Would it be better to use a plugin external hard drive to load my software on and if so what hard drive would you recommend?
Thank you for your quick response. I can then use a ZIP drive for data storage. I want to keep as much of my hard drive free of data as possible.
-
Boot camp installation of windows 8.1
Hey Gang,
Struggling here with using boot camp to load windows 8.1.
My machine: Macbook Pro retina, 15 mid-2014 2.8GHz, OS X 10.9.5 867GB
Strange I cannot find straight forward directions on the web.
Everything apparently works smoothly until windows starts up. I cannot find the Boot Camp partition.
Got to this point 5 times now.... :-)
HELP!
jcLoner T,
Here is the output from the terminal:
gpt show: /dev/disk0: mediasize=1000555581440; sectorsize=512; blocks=1954210120
gpt show: /dev/disk0: PMBR at sector 0
gpt show: /dev/disk0: Pri GPT at sector 1
gpt show: /dev/disk0: Sec GPT at sector 1954210119
start size index contents
0 1 PMBR
1 1 Pri GPT header
2 32 Pri GPT table
34 6
40 409600 1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 1429687552 2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
1430097192 1269536 3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
1431366728 522843359
1954210087 32 Sec GPT table
1954210119 1 Sec GPT header
$ sudo fdisk /dev/disk0
Disk: /dev/disk0 geometry: 121643/255/63 [1954210120 sectors]
Signature: 0xAA55
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
1: EE 1023 254 63 - 1023 254 63 [ 1 - 1954210119] <Unknown ID>
2: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
3: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
4: 00 0 0 0 - 0 0 0 [ 0 - 0] unused -
i use boot camp to install windows 8.1on my mac but in the middle of the installation it is stop,how can i install the windows again?
why it`s stop?What is your exact machine and what's the error
-
Is it possible to use Boot Camp to install Windows on an external HD?
So I don't use up space on my internal hard drive, would it be possible to use Boot Camp to install Windows to an external hard drive?
Ok, so officially, you have to install it on your Mac's internal drive. Good, thanks for clearing that up.
I guess the only simple alternative to installing Windows on your Mac's internal drive is to buy another Mac, and install it on there instead I mean, you could have a Mac Mini or a MacBook, and have that running Windows under Boot Camp. -
hello,
And thank you in advance.
I'm getting "Installer disk not found" message during boot camp 5 and windows 8 install on late 20011 MBP upgraded to OS X 10.9 Mavericks. Any ideas?
I've downloaded the Window support option software and the WindowSetupBox.exe and copied it to the USB drive. I tried to create an iso image from my Windows XP machine but recieved messages that Windows 8.1 could not run on XP. I've ordered the Windows 8.1 backup media.
Any way to proceed?
Thanks Timdownload the win 8 iso from here;
http://getintopc.com/softwares/operating-systems/download-windows-8-pro/
then start over. install on to your usb along with the support software. -
I'm getting "Installer disk not found" message during boot camp 5 and windows 8 install on late 2001 MBP running Mavericks. Any ideas?
I've downloaded the Window support option software and the WindowSetupBox.exe and copied it to the USB drive.
Thanks TimYou might have better luck in the Boot Camp community. I'll ask the hosts to relocate your post.
Boot Camp Community -
Boot Camp drivers for windows (download)
I am trying to instal windows 7 on my MacBook Pro thru Boot Camp. Does anyone know where I can download the Boot Camp drivers for windows. I can't find them on the apple website and I don't have my Mac OS X instal DVD with me.
Thank youNick Px360 wrote:
Are they essential or can I run windows 7 on my Macbook Pro without the bootcamp drives
Only if you don't mind a Windows system lacking most features and thus beaing nearly unuseable.
Applying the appropriate drivers for hardware support is a must for all operating systems.
Stefan -
Unable to install Boot Camp Drivers for Windows
Mac Pro (2) 3.2 Xeon quads
Mac OS 10.5.2
Boot Camp side - Windows XP pro x64 w/SP2
Step 3 listed in the instructions for setting up Boot Camp is to Install the Boot Camp drivers for Windows. At this point Windows recognizes my Mac Install disk 1. I get the following message: "the installer encountered errors before Boot Camp could be configured. To retry these operations at a later time, please run the installer again." I am not sure if I needed to do something to install the Service Pack 2? My firmware is at MP31.006C.B02 and 1.25f4. When I checked for the latest firmware, it returned a message that it was not necessary.
Maybe the XP pro x64 is not compatible?
Barry in St. LouisI did install windows xp sp2 32 bit on my macbook pro 2.2 GB and I'm getting the same ...
When trying to install boot camp drivers, a message came up saying:
Boot Camp requires that your computer is running Windows XP Service Pack 2 or Windows Vista.
The only option it gave me was to click the "OK" button. When I clicked OK , another message came up saying:
Boot Camp Installer completed. The install encountered errors before Boot Camp could be configured. To retry these operations at a later time, please run the installer again. Click "finish" to exit installer. I am running a brand new full retail version of windows xp service pack 2. Applecare will not help blaming Microsoft and of course Microsoft is blaming Apple. What a bunch of useless crap!! Can anyone help?? -
Boot camp cant find windows installer
I'm trying to run boot camp to install Windows 7 on a partition and it can't find the Windows installer. I'm tried it from a USB and the Windows DVD, but neither works.
It's an 2008 iMac 2.66 Ghz 4 Gig Ram, 128 SSD running 10.7.2
Thanks!Ennoxx,
I'm not exactly sure what you mean by Boot Camp "can't" find window installer. I used BC to partition my drive and create my driver DVD. I inserted the W7 DVD and clicked install. My Mac restarted, but it did not install W7. I could see there was a BC partition on my hard drive so I tried to restart and at the "chime" hold the option key. Only my Mac and Restore drives were visible. When the computer finished restarting I inserted the W7 DVD. I restarted again and held option at the chime. This time the W7 disk was visible. I selected it and everything went great.
I expected the "Windows Installer" to come up and ask to insert disk or since the disk was already in the drive to just restart in the BC partition and install it. But, it needed a little user intervention. This was true also for the several restarts during the install process. Everytime I had to hold the option key and select the Windows partition. I suppose I could have set Windows as the default but I'm not sure.
I hope you figure it out.
Good Luck.
Maybe you are looking for
-
Problem In Vendor Master Creation
When i am going to create vendor Master then Recon.Account option has no value .Its show No Entry Option Available . Pls help me and solve this problem. Thanks & Regard vipin yadav
-
Installing and using Adobe Air SDK 2.5 with Flash Professional CS4
Hi, I am trying to install the Air SDK 2.5 with Flash Professional CS4 with the intention of creating a program to use Actionscript 3 to communicate with the UDP interface using datagrams. (The server is the IL2 device link interface) As I am very ne
-
Problem w/ uninstalling quicktime HELP!
ok so i cant download ne songs b/c i gotta have the later version of itunes so i tried downloading that but it wont let me b/c my old version of quicktime won'y uninstall HELP!!! Dell Windows XP
-
Hi When a payment is received in advance by a COD customer for product not in stock. When the stock becomes available,the sales order appears on the VKM1 report to be released When the sales order presents to be released, can SAP flag the account num
-
Project Intelligence & Porfolio analysis & Project DBI
Hi, Project Intelligence & Portfolio analysis & Project DBI Please help me to understand what all these would do?? in which way its unique??? thanks a lot n advance...