Como puedo iniciar el apple mobile device
Disculpen como puedo iniciar mi "Apple mobile device"
Google translate:
Sorry as I can start my "Apple mobile device"
See:
How to restart the Apple Mobile Device Service (AMDS) on Windows
Similar Messages
-
Despues de la ultima actualizacion de iTunes, sale el siguiente mensaje "the program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem". Al dar clic en OK sale oro mensaje:"Itunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126). Cuando trato de reinstalar vuelve a mostrar un error:"Service apple mobile device failed to start. verify that you have sufficient priviliges to start system services".Alguien puede orientarme por favor?
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
quiero instalar itunes y no puedo me sale este mensaje
alguna respuestacada vez que intento instalar itunes, me surge un error que dice "Fallo al inicio del servicio "Apple Mobile Device". Compruebe que dispone de suficientes privilegios para iniciar servicios del sistema", no se que hacer.
Gracias.- -
Hace poco intente conectar mi iPad 2 a iTunes y me aparecio un mensaje de que no se podia usar el dispositivo porque no se havia iniciado el Apple Mobile Device y no aparece iPad 2 en la lista de dispositivos de iTunes e intente buscar la forma de iniciarlo y despues de intentar los pasos que ofrece el Servicio de Soporte Tecnico de Apple y aunque ya elimine y descargue la version mas nueva de iTunes el problema persiste. ¿Alguien que me pueda ayudar le agredeceria mucho su ayuda?
Google translate:
Sorry as I can start my "Apple mobile device"
See:
How to restart the Apple Mobile Device Service (AMDS) on Windows -
Apple Mobile Device Service installation rolls back
Hey there,
I've been having problems installing iTunes 9 or even 8 on my computer. While running the iTunes setup, part of the installation rolls back and when I launch iTunes after that, I get the message saying that
"This iPod cannot be used because the required software is not installed. Run iTunes installer to remove iTunes, then install iTunes again."
However, the installation doesn't work no matter how many times i reinstall it. I've fully uninstalled everything related to apple and used the microsoft's utility to check if they were properly uninstalled before reinstalling itunes, but I still got the same message.
I found out that Apple Mobile Device Service was not installed and that was the problem. When i extracted AppleMobileDeviceService.msi from the iTunes installer and ran it, it rolled back too. So I used the /l*v command to create an installation log and this is the error.
DIFXAPP: INFO: opening HKEY_USERS 'S-1-5-21-4128058654-1677487342-2165978628-1007\Software\Microsoft\Windows\Curr entVersion\DIFxApp\Components\{9AA3828A-F852-11DB-8E29-6C6B55D89593}' (User's SID: 'S-1-5-21-4128058654-1677487342-2165978628-1007') ...
DIFXAPP: INFO: ENTER: DriverPackageInstallW
DIFXAPP: INFO: usbaapl.inf: checking signature with catalog 'C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers\USBAAPL.CAT' ...
DIFXAPP: INFO: Driver package 'usbaapl.inf' is WHQL signed.
DIFXAPP: ERROR: Create Driver Store entry failed. (Error code 0x6E: The system cannot open the device or file specified.)
DIFXAPP: INFO: Successfully removed '{9AA3828A-F852-11DB-8E29-6C6B55D89593}' from reference list of driver store entry ''
DIFXAPP: INFO: RETURN: DriverPackageInstallW (0x52)
DIFXAPP: ERROR encountered while installing driver package C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers\usbaapl.inf
DIFXAPP: InstallDriverPackages failed with error 0x52
DIFXAPP: RETURN: InstallDriverPackages() 82 (0x52)
Action ended 17:15:17: InstallFinalize. Return value 3.
Can anyone help me please? Any help will be appreciated =P
CheersI have recently been fighting my system to get itunes to recognise my iphone and i ran into a similar problem.
I couldnt uninstall the old version of apple mobile device support, and installing the new itunes over the top did not seem to help either.
But i found a work around.
Try opening the itunes.exe install package with winrar. (www.winrar.com, its a free program) and then extracting only the applemobiledevicesupport.exe file.
Reboot your system, run that file and then reboot again.
It should work.
If it doesnt, then good luck to you :P
-Adam -
Apple Mobile Device Support fails to install, remains unsolved.
i came back to the forums after a coupld of months, and this issue is still unsolved, will support please read this and answer us, it seems i am not the only one with such problems. so i will repost this issue here hoping to find a solution.
Thank you.
Reading through the forums, i found many with this same error, some said reinstalling solves this problem, but for me, and many others, it did not, so here is a log of the installation where the error shows, please look at it and tell us wheat to do,
Action 8:21:17: InstallFiles. Copying new files
Action 8:21:18: MsiRollbackInstall.
Action 8:21:18: MsiInstallDrivers.
DIFXAPP: ENTER: InstallDriverPackages()
DIFXAPP: 'CustomActionData' property 'DIFxApp Version' is 2.1.
DIFXAPP: 'CustomActionData' property 'UI Level' is 5.
DIFXAPP: 'CustomActionData' property 'componentId' is {9AA3828A-F852-11DB-8E29-6C6B55D89593}.
DIFXAPP: 'CustomActionData' property 'componentPath' is C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers\.
DIFXAPP: 'CustomActionData' property 'flags' is 0x17.
DIFXAPP: 'CustomActionData' property 'installState' is 2.
DIFXAPP: 'CustomActionData' property 'ProductName' is Apple Mobile Device Support.
DIFXAPP: 'CustomActionData' property 'ManufacturerName' is Apple Inc..
DIFXAPP: INFO: opening HKEY_USERS 'S-1-5-21-1605124395-1919374747-2981180892-1004\Software\Microsoft\Windows\Curr entVersion\DIFxApp\Components{9AA3828A-F852-11DB-8E29-6C6B55D89593}' (User's SID: 'S-1-5-21-1605124395-1919374747-2981180892-1004') ...
DIFXAPP: INFO: ENTER: DriverPackageInstallW
DIFXAPP: INFO: usbaapl.inf: checking signature with catalog 'C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers\USBAAPL.CAT' ...
DIFXAPP: INFO: Driver package 'usbaapl.inf' is WHQL signed.
DIFXAPP: ERROR: Create Driver Store entry failed. (Error code 0x6E: The system cannot open the device or file specified.)
DIFXAPP: INFO: Successfully removed '{9AA3828A-F852-11DB-8E29-6C6B55D89593}' from reference list of driver store entry ''
DIFXAPP: INFO: RETURN: DriverPackageInstallW (0x52)
DIFXAPP: ERROR encountered while installing driver package C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers\usbaapl.inf
DIFXAPP: InstallDriverPackages failed with error 0x52
DIFXAPP: RETURN: InstallDriverPackages() 82 (0x52)
Action ended 8:21:20: InstallFinalize. Return value 3.
Action 8:21:20: Rollback. Rolling back action:
Rollback: MsiInstallDrivers
Rollback: MsiRollbackInstall
DIFXAPP: ENTER: RollbackInstall()
DIFXAPP: 'CustomActionData' property 'DIFxApp Version' is 2.1.
DIFXAPP: 'CustomActionData' property 'componentId' is {9AA3828A-F852-11DB-8E29-6C6B55D89593}.
DIFXAPP: 'CustomActionData' property 'flags' is 0x17.
DIFXAPP: 'CustomActionData' property 'installState' is 2.
DIFXAPP: 'CustomActionData' property 'ProductName' is Apple Mobile Device Support.
DIFXAPP: 'CustomActionData' property 'ManufacturerName' is Apple Inc..
DIFXAPP: This was the component where the install failure occurred. The rollback for this component must have already occurred at the time of failure. No need to rollback again
DIFXAPP: Rollback failed with error 0x2
DIFXAPP: RETURN: RollbackInstall() 2 (0x2)
Rollback: Copying new files
Rollback: Moving files
Rollback: Creating folders
Rollback: Removing system registry values
Rollback: Deleting services
Rollback: Stopping services
Rollback: Updating component registration
Action 8:21:41: Rollback. Rolling back action:
Rollback: MsiInstallDrivers
Rollback: MsiRollbackInstall
DIFXAPP: ENTER: RollbackInstall()
DIFXAPP: 'CustomActionData' property 'DIFxApp Version' is 2.1.
DIFXAPP: 'CustomActionData' property 'componentId' is {9AA3828A-F852-11DB-8E29-6C6B55D89593}.
DIFXAPP: 'CustomActionData' property 'flags' is 0x17.
DIFXAPP: 'CustomActionData' property 'installState' is 2.
DIFXAPP: 'CustomActionData' property 'ProductName' is Apple Mobile Device Support.
DIFXAPP: 'CustomActionData' property 'ManufacturerName' is Apple Inc..
DIFXAPP: ERROR 0x2 encountered while opening persistent-info key for component '{9AA3828A-F852-11DB-8E29-6C6B55D89593}'
DIFXAPP: Rollback failed with error 0x2
DIFXAPP: RETURN: RollbackInstall() 2 (0x2)
Rollback: Copying new files
Rollback: Moving files
Rollback: Creating folders
Rollback: Removing system registry values
Rollback: Deleting services
Rollback: Stopping services
Rollback: Updating component registration
Action ended 8:22:00: INSTALL. Return value 3.
Action ended 8:22:00: ExecuteAction. Return value 3.
Action 8:22:00: SetupCompleteError.
Action start 8:22:00: SetupCompleteError.
Action 8:22:00: SetupCompleteError. Dialog created
Action ended 8:22:03: SetupCompleteError. Return value 2.
Action ended 8:22:03: INSTALL. Return value 3.
=== Logging stopped: 1/11/2008 8:22:03 ===
MSI (c) (10:8C) 08:22:03:595: Product: Apple Mobile Device Support -- Installation failed.
now i went to the directory where the driverfiles should be, and paused the installation just before it starts rolling back and made a copy of the whole thing, the driver files are being extracted, and thinking it may have failed to find them, i restarted the installation and paused it after it extracted the files, copied over my backup files to where they should be, and resumed, same thing happened, failure again.
I stopped all the services running, (msconfig / startup and services) and that still did not help, i went through my registry for every "apple" and deleted it, after uninstalling all apple products, that did not help, i ran windows install clean up and made sure that quicktime and itunes and apple updatea re not installed, did the whole thing again, no luck.......
Can someone please tell me what is going on, i can run it just fine on my other machine, which is running windows xp pro as well, the only thing different i did on this one was that i plugged in the Iphone before installing the software, whereas i ran the itunes installer on that one before i plugged in the iphone, and yes, i did get the iphone driver as a camera at first, and i changed it later by pointing the update driver to the same directory where applemobiledevicesupport extracted the 3 driver files :
C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers
and the files are usbaapl.cat , usbaapl.inf, and usbaapl.sys
please look into this issue, i've done everything i could think of,
Thank you.
Windows XP Pro*"will support please read this and answer us"*
These are user to user forums. Apple employees do not take part in them. -
Apple Mobile Device Support fails to install ??
Reading through the forums, i found many with this same error, some said reinstalling solves this problem, but for me, and many others, it did not, so here is a log of the installation where the error shows, please look at it and tell us wheat to do,
Action 8:21:17: InstallFiles. Copying new files
Action 8:21:18: MsiRollbackInstall.
Action 8:21:18: MsiInstallDrivers.
DIFXAPP: ENTER: InstallDriverPackages()
DIFXAPP: 'CustomActionData' property 'DIFxApp Version' is 2.1.
DIFXAPP: 'CustomActionData' property 'UI Level' is 5.
DIFXAPP: 'CustomActionData' property 'componentId' is {9AA3828A-F852-11DB-8E29-6C6B55D89593}.
DIFXAPP: 'CustomActionData' property 'componentPath' is C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers\.
DIFXAPP: 'CustomActionData' property 'flags' is 0x17.
DIFXAPP: 'CustomActionData' property 'installState' is 2.
DIFXAPP: 'CustomActionData' property 'ProductName' is Apple Mobile Device Support.
DIFXAPP: 'CustomActionData' property 'ManufacturerName' is Apple Inc..
DIFXAPP: INFO: opening HKEY_USERS 'S-1-5-21-1605124395-1919374747-2981180892-1004\Software\Microsoft\Windows\Curr entVersion\DIFxApp\Components\{9AA3828A-F852-11DB-8E29-6C6B55D89593}' (User's SID: 'S-1-5-21-1605124395-1919374747-2981180892-1004') ...
DIFXAPP: INFO: ENTER: DriverPackageInstallW
DIFXAPP: INFO: usbaapl.inf: checking signature with catalog 'C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers\USBAAPL.CAT' ...
DIFXAPP: INFO: Driver package 'usbaapl.inf' is WHQL signed.
DIFXAPP: ERROR: Create Driver Store entry failed. (Error code 0x6E: The system cannot open the device or file specified.)
DIFXAPP: INFO: Successfully removed '{9AA3828A-F852-11DB-8E29-6C6B55D89593}' from reference list of driver store entry ''
DIFXAPP: INFO: RETURN: DriverPackageInstallW (0x52)
DIFXAPP: ERROR encountered while installing driver package C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers\usbaapl.inf
DIFXAPP: InstallDriverPackages failed with error 0x52
DIFXAPP: RETURN: InstallDriverPackages() 82 (0x52)
Action ended 8:21:20: InstallFinalize. Return value 3.
Action 8:21:20: Rollback. Rolling back action:
Rollback: MsiInstallDrivers
Rollback: MsiRollbackInstall
DIFXAPP: ENTER: RollbackInstall()
DIFXAPP: 'CustomActionData' property 'DIFxApp Version' is 2.1.
DIFXAPP: 'CustomActionData' property 'componentId' is {9AA3828A-F852-11DB-8E29-6C6B55D89593}.
DIFXAPP: 'CustomActionData' property 'flags' is 0x17.
DIFXAPP: 'CustomActionData' property 'installState' is 2.
DIFXAPP: 'CustomActionData' property 'ProductName' is Apple Mobile Device Support.
DIFXAPP: 'CustomActionData' property 'ManufacturerName' is Apple Inc..
DIFXAPP: This was the component where the install failure occurred. The rollback for this component must have already occurred at the time of failure. No need to rollback again
DIFXAPP: Rollback failed with error 0x2
DIFXAPP: RETURN: RollbackInstall() 2 (0x2)
Rollback: Copying new files
Rollback: Moving files
Rollback: Creating folders
Rollback: Removing system registry values
Rollback: Deleting services
Rollback: Stopping services
Rollback: Updating component registration
Action 8:21:41: Rollback. Rolling back action:
Rollback: MsiInstallDrivers
Rollback: MsiRollbackInstall
DIFXAPP: ENTER: RollbackInstall()
DIFXAPP: 'CustomActionData' property 'DIFxApp Version' is 2.1.
DIFXAPP: 'CustomActionData' property 'componentId' is {9AA3828A-F852-11DB-8E29-6C6B55D89593}.
DIFXAPP: 'CustomActionData' property 'flags' is 0x17.
DIFXAPP: 'CustomActionData' property 'installState' is 2.
DIFXAPP: 'CustomActionData' property 'ProductName' is Apple Mobile Device Support.
DIFXAPP: 'CustomActionData' property 'ManufacturerName' is Apple Inc..
DIFXAPP: ERROR 0x2 encountered while opening persistent-info key for component '{9AA3828A-F852-11DB-8E29-6C6B55D89593}'
DIFXAPP: Rollback failed with error 0x2
DIFXAPP: RETURN: RollbackInstall() 2 (0x2)
Rollback: Copying new files
Rollback: Moving files
Rollback: Creating folders
Rollback: Removing system registry values
Rollback: Deleting services
Rollback: Stopping services
Rollback: Updating component registration
Action ended 8:22:00: INSTALL. Return value 3.
Action ended 8:22:00: ExecuteAction. Return value 3.
Action 8:22:00: SetupCompleteError.
Action start 8:22:00: SetupCompleteError.
Action 8:22:00: SetupCompleteError. Dialog created
Action ended 8:22:03: SetupCompleteError. Return value 2.
Action ended 8:22:03: INSTALL. Return value 3.
=== Logging stopped: 1/11/2008 8:22:03 ===
MSI (c) (10:8C) [08:22:03:595]: Product: Apple Mobile Device Support -- Installation failed.
now i went to the directory where the driverfiles should be, and paused the installation just before it starts rolling back and made a copy of the whole thing, the driver files are being extracted, and thinking it may have failed to find them, i restarted the installation and paused it after it extracted the files, copied over my backup files to where they should be, and resumed, same thing happened, failure again.
I stopped all the services running, (msconfig / startup and services) and that still did not help, i went through my registry for every "apple" and deleted it, after uninstalling all apple products, that did not help, i ran windows install clean up and made sure that quicktime and itunes and apple updatea re not installed, did the whole thing again, no luck.......
Can someone please tell me what is going on, i can run it just fine on my other machine, which is running windows xp pro as well, the only thing different i did on this one was that i plugged in the Iphone before installing the software, whereas i ran the itunes installer on that one before i plugged in the iphone, and yes, i did get the iphone driver as a camera at first, and i changed it later by pointing the update driver to the same directory where applemobiledevicesupport extracted the 3 driver files :
C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers
and the files are usbaapl.cat , usbaapl.inf, and usbaapl.sys
please look into this issue, i've done everything i could think of,
Thank you.I have the exact same problem on my workstation and previously solved it by installing iTunes on a different computer and copying all the files and registry keys to my workstation. However, it didn't solve the problem when i tried to update to itunes 7.6 ...
Is there any solution yet? -
I was trying to do the latest update on my desktop for my Itunes. I got MSVCR80.dll is missing. I saw a post about deleting all the apple itunes programs, restarting and reinstalling. I tried that. As it was installing a message came up about "Service'Apple Mobile Device' failed to start. Verify that you have sufficient privileges to start systems services. I did a retry, got the same message, then hit ignore. It went on. Then a message popped up saying "Itunes not installed correctly" Error 7 (Windows error 126)
Now my Itunes program will not open at all. What gives? This is very frustrating and I am not very computer literate to begin with.Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy -
Not sure what to do. I've tried a system restore on my computer after the update in hopes of undoing the problem, that didn't work. I've tried to install, the new version of itunes for over two days now and I get to the point where it says "starting services" and it almost get's done and then it gives me that message " Service apple mobile device (apple mobile device) failed to start. Verify that you have sufficient privledges to start system services." Then it gives me three options to click on "abort", "retry" or "ignore". I've tried to retry over and over and it does no good, I just get the same message. I've tried ignore and the one time it did finish installing itunes, it didn't work, I got error messages telling me that it failed to download properly and I needed to delete the program and download it again. I thought maybe it had something to do with my ipod not being pluged into the computer so I pluged that it and it's still giving me the same message. I just don't know what to do. I'm very frustrated and I would really appreciate it if someone could help me. I'm completely out of ideas.
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
Can some one help me with diagnostic test result " apple mobile device driver not found"?
I bought an iPhone 4gs 32gb from Singapore. iso 4. I'm living in Chennai, India. To connect it to my computer (windows XP,), I have downloaded iTunes 10.6.1.7. Unfortunately iTunes is not recognizing my iPhone. I had tried to troubleshoot it by reinstalling iTunes (2 times). I have restarted the apple mobile device from control panel. I try connecting my iphone in another usb port. but no use. I don't know what am I missing?. iTunes opens on my computer. but doesn't recognize my device. when I click on help. it says an "unknown error has occurred. your computer is not connected to internet. please check your internet connection and try again later". I don't know what to do? could you please help me? thank you so much for your help and time.
when I update the usb driver (C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers.Double-click the usbaapl file.) I followed the procedure from this site. http://support.apple.com/kb/TS1538 when I finished, it says "the specified location does not contain information about your software"
I did the apple's diagnostics test on my computer. I'm pasting the result for your info.
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
System manufacturer System Product Name
iTunes 10.6.3.25
QuickTime not available
FairPlay 1.14.43
Apple Application Support 2.1.9
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.2.0.6
Apple Mobile Device Driver not found.
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0013AC2C08548378
Current user is an administrator.
The current local date and time is 2012-06-28 15:23:45.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Intel(R) G41 Express Chipset
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {D85300A1-330D-41ED-AC5A-EC032B22FBF0}
Description: Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller - Packet Scheduler Miniport
IP Address: 192.168.1.3
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Thu Jun 28 15:17:19 2012
Lease Expires: Fri Jun 29 03:17:19 2012
DNS Servers: 192.168.1.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Basic connection to the store failed.
The network connection timed out.
Connection attempt to Gracenote server was successful.
The network connection timed out.
iTunes has never successfully accessed the iTunes Store.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
G: Optiarc DVD RW AD-7220A, Rev 1.01
Drive is empty.
**** Device Connectivity Tests ****
iPodService 10.6.3.25 is currently running.
iTunesHelper 10.6.3.25 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) N10/ICH7 Family USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) N10/ICH7 Family USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) N10/ICH7 Family USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) N10/ICH7 Family USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) N10/ICH7 Family USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.I have the same problem. I think that someone tried my iphone before me because when I want to reset it, I'm invited to enter a password that I didn't set. Also, when I go the Map application, the iphone indicate that I'm locateded in China while I'm in Tunisia. Now, I can't connect to my iphone to itunes, and I can't reset it because it ask me to enter a password that I didn't set.
This is my post:
https://discussions.apple.com/thread/4063223
Please, we need your help. -
Iphone 5 Apple Mobile Device Ethernet comes up as "Network cable unplugged".
I've Windows 8 64-bit and want to use the iPhone 5 as my main wireless USB dongle and I've had this problem since Windows 7 where, no matter what I do, the Apple Mobile Device Ethernet comes up as "Network cable unplugged".
I've unplugged and plugged it back in, reinstalled iTunes, reset the network settings on the phone, made sure everythings up to date and reset the service in Windows to no avail.Yes My personal hot spot is on in cellular data on and i have a data plan that allow tethering. that problem is start 4 days before. My iphone is do this job very well few days before.
-
I bought my IPad 2 from a friend. I have reset to clear all of his information out. I am trying to connect it to my computer to sync my itunes and I keep getting the message that my IPad can't be used because Apple Mobile Device Service is not started can anyone help with this?
I cannot find "Other" devices. I found Apple Mobile Device under Universal Bus Controllers but cannot see "recovery mode" or any other status. I use Windows Vista.
When I try to restart Apple Mobile Device Service I get the following message: "The Apple Mobile Device Service on Local Computer started then stopped. Some services stop automatically if they are not in use by other services or programs". What does this mean?
During the last 48 hours I was able to see my iPad in iTunes only one time during many attemnpts to connect . I haven't been able to see it during the llast several attempts.
Any suggestions? The standard suggestions have not worked: i.e. stop then start AMDS; tuurn off iPad and PC, then restart both and reconfrom iPad to PC; reload iTunes. -
Hey anybody,
Neither myself (running on PC windows vista 32 bit) or my friend (on a mac) are able to install versions of iTunes around 10.5 or higher successfully. This leads me to believe the problem isn't necessarily with our computers and there may be something wrong elsewhere. I'm not a computer wiz but I have tried most of the advice on these forums e.g. Uninstalling and reinstalling, deleting temporary files, expanding files and trying individual downloads and more. I can install older versions of iTunes where they use to combine it with QuickTime with no problems however this is no good to me or my friend because only versions 10.5 and up come with support with iPhone 4S and that's what we need. I managed after several attempts to install iTunes 10.52 but without the apple mobile device so therefor the iTunes wouldn't connect to my phone or recognise it, apple sync notifier also has problems and fails to start.
Please can someone help me with this, I have tried everything on the apple troubleshooting pages so please don't link me those. Or please can iTunes and apple do something in an update that corrects this problem because I know many people are having similar issues. I only bought this phone for the music and at the moment I feel cheated because I wouldn't have these problems with any other phone because I'd just be able to drag and drop.Hi there,
I had the same experience. I'm using a Dell Inspiron 1545 laptop, with Windows 7 Home Edition, 32 bit.
I tried to install iTunes 10.5 and it started installing, then, just before the end of the process, came up with the following error message:
"There is a problem with this Windows Installer Package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
Of course, no information on what the program that couldn't be run was! At first I tried the usual stuff, like scanning for viruses etc. but nothing doing. Then I started Googling. In the end, I uninstalled all Apple stuff from my computer. A lot of it I had to do manually, going in to the program files drive and deleting stuff from there, but some of it wouldn't delete as it was saying it was open in Windows Explorer. In the end, I managed to delete the iTunes folders by selecting one of my mp3 tracks saved on the computer and right clicking 'open with'. I then browsed my pc to locate the iTunes folders still outstanding and was able to right click and delete them that way.
Then emptied the recycle bin and did a restart before going online and downloading iTunes 10.5.
Thankfully it worked, but its taken me a good few hours and made me really quite tetchy! I've never had this problem before, so I hope this is going to be a one off.
One thing that doesn't seem to be working is that, despite how many times I tell it that my preference is for the iTunes Media folder to be located on my external hard drive, it keeps putting it back to the C drive! Didn't have that issue with the last version. Grrrrrr. Arrrrgggh.
Hope you manage to get yours sorted - this is affecting a lot of people by the look of things. -
This phone can not be used because the apple mobile device service is not started
i plug my iphone into my computer and the message this phone can not be used because the apple mobile device service is not started pops up and wont let me download any music onto my phone. what can i do to make that stop happening?
See Here
http://support.apple.com/kb/TS1567 -
Trying to sync my phone to update because it wont let me update apps on the phone itself. When I plug in to iTunes I'm getting a message saying "This iPhone cannot be used because the Apple Mobile Device service is not started." How do I fix this?
iTunes: How to remove and reinstall the Apple Mobile Device Service on Mac OS X
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows
Maybe you are looking for
-
Connecting the T410s to an external monitor
1) Excuse the ignorant question but how would you connect the T410s to an external monitor? The T410s has a DisplayPort port, but what if the monitor does not have a DisplayPort port but an HDMI port? 2) Which leads into my second question. How wou
-
Assembling a short iMovie from stills. Out of about 20 stills,I can't change the length on 3 of them. I'm using the same procedure on all, but these 3 won't shorten. The rest I was able to change the length of with no problem.
-
Where can I lodge a complaint with the changes that have been made with the most recent firefox update? The two problems I have are tabs always appearing even when there is just one tab open. The second is the url search bar and the side search bar b
-
Trouble viewing column headers JTable
I am having trouble with the column headers showing up. I have added a JScrollPane to the JTable, yet it fails to show up Here is the array for the data and column headings: String[] tableheadings = {"","Jan", "Feb", "Mar","Apr","Jun", "Jul"};
-
SM 4.0 - Is it possible to write spent hours through SM 4.0
Hi everyone, I've had a very urgent question from the head of my department: Is it possible to write my spent time/hours via the Solution Manager to a SAP-managed time sheet (like CATS)? For example: When I receive a call/support message and let's sa