Comp/ Desktop Manager not recognizing plugged device

I recently installed/ updated the BB Desktop Software and when I plug in my BB Curve 8520, my comp doesn't recognize the device.
Note 1: I've installed all updates on my computer AND the new OS on my phone already.
Note 2: My phone recognizes that it's plugged into the computer because begins to charge.

Hi and Welcome to the Forums!
Here is the list of troubleshooting articles...hopefully something will be useful:
http://supportforums.blackberry.com/t5/BlackBerry-Desktop-Software/Tips-for-getting-BlackBerry-Deskt...
KB02640 Troubleshooting USB connections
KB15486 Top 10 BlackBerry smartphone and BlackBerry Desktop Manager troubleshooting tips
KB11439 BlackBerry Desktop Software does not detect the BlackBerry smartphone when it is connected
KB00019 No PIN displayed in BlackBerry Desktop Redirector
KB10938 "USB charging current is insufficient" appears on the BlackBerry smartphone
KB01451 How to turn on advanced synchronization logging if a wired synchronization fails
KB19717 The BlackBerry smartphone is not detected as a USB Mass Storage Device when connected to a computer
KB16310 Media Transfer Protocol and the BlackBerry Storm smartphone
http://supportforums.blackberry.com/t5/BlackBerry-Desktop-Software/Desktop-Manager-quot-disconnected...
Also, check that you are using only root USB ports...no hubs (sometimes the front-side ports are hubs...use a rear USB port). And make sure to try disabling USB power management in your system configuration (Device Manager).
Also check on conflicting software...it has been reported that the software package NTI Shadow&Ninja can cause a conflict; removing them and reinstalling the BB desktop software allows it to install correctly.
Apologies in advance if this is redundant -- there's no way to be sure if you've already seen and tried these.
Hopefully something there is helpful!
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • App Error 200???? Desktop Manager not connecting to Device??

    I am officially out of ideas for what to do with my phone!!
    I changed my pay as you go tariff yesterday and in order to reset the phone to get my internet settings I switched off the handset and turned it on again.
    When I turned it back on it started to load as normal then came up with  "App Error 200" message. I have done a hard reset and even after taking out the sim and battery it still wont work.
    I know I can change things on my Desktop Manager, but that now wont recognise the phone is connected. I have gone to the 'Options' button (top right hand corner) and applyed the USB connection but is still wont work!!
    Can anyone help as I am totally lost and have lost all patients!!!!
    Thanks

    If that still doesn't work you will need to do the following:
    http://www.blackberryfaq.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F
    http://www.blackberryfaq.com/index.php/What_to_do_next_if_Jl_Cmder_will_not_connect_and_wipe
    Then reload the OS from the thread below:
    http://www.blackberryforums.com/general-8900-series-discussion-javelin/227412-os-8900-v5-0-0-1168-5-...
    You can use the OS in the download link in the thread above or you can download from your own carrier (doesn't matter where it comes from) but be sure and use the instructions in the above thread to install it.
    If you didn't have a backup from before this happened you will lose your data.
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • Creative Cloud Desktop Manager not recognizing membership

    All my CC apps are opening as trial versions and when I sign in after clicking "License this software" it still doesn't recognize my subscription and continues to ask for a serial number.

    Looks like I had done all you advised except delete the Adobe Creative Cloud and Application Manager folders under Utilities. I did that and now CC installation is proceeding. THANK YOU, THANK YOU, THANK YOU! I spent an hour waiting for someone to get to me on Chat and gave up and was not looking forward to calling Adobe tomorrow.

  • My dvd drive not recognized in device manager,ge​tting the yellow explanatio​n mark.

    my dvd drive not recognized in device manager,getting the yellow explanation mark. Tried uninstallingdevice drive and scanning for new hardware. scanned for updates, etc. I getting no results. The laptop is a Pavilion DV5. Thanks 

    Hi,
    It could be that the drive has a Hardware issue, but try the following.
    From the Start Menu, open All Programs, open Accessories, right click the Command Prompt and select 'Run as Administrator'.  In to the prompt type the following command and hit enter.
    sfc /scannow                 ( note that there is a space between sfc and the / )
    Let the process complete, then type exit and hit enter.  
    Next, open Device Manager, right click the DVD drive and select Uninstall.  When this has completed, restart the notebook and let Windows rediscover the device and check.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Computer not recognizing my device

    had to reset my ipod touch. Now when i plug it up to my computer the computer is not recognizing my device and syncing.

    See:
    iOS: Device not recognized in iTunes for Windows

  • My iphone is blocked and I am being told to pluig it in to itunes but the itunes it was set up with is not recognizing the device - can anyone help?

    My iphone is blocked and I am being told to plug it in to itunes but the itunes it was set up with is not recognizing the device - can anyone help? 

    I also live in the United States so redownloading shouldn't be a problem.

  • My I-pod shows up on my computer but is not recognized under devices in I-Tunes, any suggestions?

    My I-pod shows up on my computer but is not recognized under devices in I-Tunes, any suggestions?

    Hey corky60,
    I'd go ahead and give the following troubleshooting steps a shot:
    1. Try the iPod troubleshooting assistant:
    2. Restart the iPod Service
    3. Restart the Apple Mobile Device Service
    4. Empty your Temp directory and restart
    5. Verify that the Apple Mobile Device USB Driver is installed
    6. Change your iPod's drive letter
    7. Remove and reinstall iTunes
    8. Disable conflicting System Services and Startup Items
    9. Update, Reconfigure, Disable, or Remove Security Software
    10. Deleting damaged or incorrect registry keys
    You can read more about each step in detail in this article:
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/TS1363
    I'd start at the top and work through the steps until iTunes recognizes your iPod nano.
    Take care,
    David

  • Anyone having trouble with this phone and their in car bluetooth?  Calls dropping not recognizing the device.  Had the car bluetooth reset at dealer. They said it is a common problem with the iPhone?

    Bluetooth in car is not recognizing my device and when it does it will only stay connected about 5 minutes.   Blue tooth has been reset at the dealer. They said it is very common with the iPhone? The car is a 2014 Toyota Highlander.  This is very very frustrating as I have a 45 minute commute to work and do not want to have to hold my phone.... Thank you for any help.

    sstaylor2001 wrote:
    I have already done all of that.  It still doesn't work. My husband has the same phone and a 2013 toyota and his is fine. Toyota told me it is the brand new cars and the new apple update.  Need to figure something out.  This phkne is useless now and I've had a iPhone for 5 years
    Wow you would think the newer car is just an updated version of what your husbands has.
    I wonder if your husbands car was updated to the same connect system if his would not connect?
    Does your husbands phone work because he does not have the new iOS from Apple?
    Can he hook to your connect system in the car?

  • USB is not recognizing the device and giving error 10

    My PC USB is not recognizing the device (iphone) and giving error 10.. The USb is malfunctioning but ipod is getting connected easliy

    Try DFU Mode Restore. Open iTunes on computer. Connect iPhone to computer with USB cable. Hold both Home and Power button, after exactly 10 seconds release the Power Button, keep holding the Home button until iTunes recognizes iPhone in Recovery Mode, usually about 20 seconds time. If the iPhone screen is black, blank this is DFU Mode. Click the Restore button of iTunes.

  • My child has disabled her ipod and i have had to reinstall itunes which is not recognizing the device to enable us to restore to factory setting

    My child has disabled her ipod and i have had to reinstall itunes which is not recognizing the device to allow me to restore ipod to factory setting.

    Try here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • Itunes does not recognized my device what will i do

    itunes does not recognized my device what will i do

    BigTarantula99 your link says:
    If you have an iPod touch, see iOS: Device not recognized in iTunes for Windows.

  • HT1923 i have installed the updated itunes but it is not recognizing my devices can anyone help

    i have installed updated version of itunes but it is not recognizing my devices can anyone help

    Many thanks.
    That suggests that another application has stashed old QuickTime componentry in your system files.
    So just in case we'll go looking for older QuickTime componentry in the most common locations for it to be stashed.
    First we'll need to change some view settings.
    In your Start menu, open Computer.
    In your Organise menu, select Folder Options.
    In the View tab, make sure that "Show hidden files and folders" is selected, and Hide extensions for known file types is unchecked.
    Click OK.
    Now in Computer, open your C:\ drive (or whichever drive you have your operating system installed on).
    Open the "Windows" folder.
    If you have a 32-bit version of Windows, open the "System32" folder.
    If you have a 64-bit version of Windows, open the "SysWOW64" folder.
    What files and folders can you see in there with QuickTime in the title? (In a standard installation of Quicktime you should be seeing precisely two files... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

  • Itunes not recognizing any device

    itunes not recognizing any devices - old or new

    iPad not showing up in iTunes on a PC
    http://www.apple.com/support/ipad/assistant/itunes/
    iPad not showing up on a Mac
    http://support.apple.com/kb/TS1591

  • [solved] Digital Camera not recognized in device-manager

    My digital camera "Canon Powershot SX120 is" is not recognized by the devicemanager. I have read Digital Cameras.
    $ groups
    wheel storage users printadmin
    The "camera"-Group isn't needed anymore and this group doesn't exist on my system.
    The Powershot SX 120 has a  MTP/PTP connection mode (as the manual says). But:
    # mtp-detect
    Unable to open ~/.mtpz-data for reading, MTPZ disabled.libmtp version: 1.1.6
    Listing raw device(s)
    No raw devices found.
    gphoto succeed:
    $ gphoto2 --auto-detect
    Modell Port
    Canon PowerShot SX120 IS usb:002,019
    A gphoto --summary could be found here
    There is no udev-rule for this camera. If i create one while copying a rule from a similar camera from /etc/udev/rules.d/69-libmtp.rules, and store it into /etc/udev/rules.d/69-canon.rules, the device-manager shows up. My udev-rule:
    # Canon PowerShot SX120AX (PTP/MTP mode)
    ATTR{idVendor}=="04a9", ATTR{idProduct}=="31e0", SYMLINK+="libmtp-%k", ENV{ID_MTP_DEVICE}="1", ENV{ID_MEDIA_PLAYER}="1"
    The device-manager shows me only the option to open with a file-manager. Doing so will result in an error:
    The file or folder udi=/org/kde/solid/udev/sys/devices/pci0000:00/0000:00:02.1/usb2/2-8/ do not exist.
    With my udev-rule:
    solid-hardware listen
    Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
    Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
    Listening to add/remove events:
    Device Added:
    udi = '/org/kde/solid/udev/sys/devices/pci0000:00/0000:00:02.1/usb2/2-8'
    Without the active udev-rule, "solid-hardware listen" produces nothing, but
    udevadm monitor
    monitor will print the received events for:
    UDEV - the event which udev sends out after rule processing
    KERNEL - the kernel uevent
    KERNEL[5077.662572] add /devices/pci0000:00/0000:00:02.1/usb2/2-8 (usb)
    KERNEL[5077.662655] add /devices/pci0000:00/0000:00:02.1/usb2/2-8/2-8:1.0 (usb)
    UDEV [5077.681178] add /devices/pci0000:00/0000:00:02.1/usb2/2-8 (usb)
    UDEV [5077.693035] add /devices/pci0000:00/0000:00:02.1/usb2/2-8/2-8:1.0 (usb)
    Don't know what to do ... is a udev-rule necessary to bring up the message from device-manger? Or is the Camera not recognized as a mtp-device (the Camera has no such settings)? How could i figure it out?
    With Digikam i could import Fotos, but i would do so with gwenview. I've tried to check it out with gwenview_importer:
    $ gwenview_importer --udi '/org/kde/solid/udev/sys/devices/pci0000:00/0000:00:02.1/usb2/2-8'
    QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
    gwenview_importer: Missing required source folder argument.
      (don't care about the different udi, i took this example from a former try) but i don't know, how to find out where the "source folder" is ...
    Last edited by quiqueck (2014-02-26 20:10:25)

    I have solved this by making an extra udev-rule for my camera. See my adventure on forum.kde.org for details

  • Dc/dvd drive not functioning and not recognized in device manager after installing Windows 7 OS

    I have an HP Pavilion laptop, model # dv9617nr, which was originally loaded (from the factory) with Windows Vista.  I upgraded the OS to Windows 7 a few months ago, and initially, everything worked fine.  Within the last month, however, my DVD/CD ROM optical drive stopped working and is not recognized in Explorer, and does not show up in Device Manager.  I have tried a number of fixes from this forum and the Microsoft Windows 7 forums, with no positive effect.  I should note that upon inserting a disc in the drive, everything sounds normal (device spins and the external LED lights up) but nothing happens and the unit shuts down.
    I have no idea if this is a software or a hardware issue.  I did check the HP website for software and driver updates for my model and the Windows7 OS, but HP has no update for this PC running this OS.  ANY help is greatly appreciated.

    Hi
    Please find the link given below might help you to fix the issue on your unit.
    Troubleshooting CD or DVD Drive Detection Problems
    Let us know how it goes!
    *Although I am an HP employee, I am speaking for myself and not for HP.
    ****Click the White Kudos star to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

Maybe you are looking for