Compact flash ipod mini 1st gen

I have a 1st gen ipod mini and bought a 32gb compact flash card to replace my broken 4gb hard drive. When I try to connect to itunes to re install the firmware on the compact flash card, itunes will not recognize. I get a little folder with ! mark next to it then when i connect it, it just says do not disconnect. Any help would be awesome thank you!

Robert,
Besides the scrolling feature built into the click-wheel, there is a microswitch button for each function.  In other words, Menu, Forwards, Backwards, Play/Pause and Center Button each have their own switch that’s activated when you press that part of the wheel. 
It’s possible that the switch for the Forward function has failed.  Does that button work in ANY menu area.  Do the other buttons work?  If you’re in the middle of an album, can you go backwards in the list of songs?
I was just working on the click-wheel on one of my Mini a couple of days ago.  I bought a used one and the prev other had some kind of decal over the scroll and the adhesive virtually glued the center button to the rest of the wheel. 
Hopefully, it’s just the Mini’s click-wheels are they’re available on eBay for about $10 and can be user-replaced, if you’re VERY careful. 
I also have an old 1st gen Mini that could be a parts donor and could do this for you.  I could also replace the harddrive with a 32gb Compact Flash card and new battery  while the Mini is opened, if your interested.  I’ve done a BUNCH of those and they work great.  I'm even selling one of them on eBay now.
BWhite62

Similar Messages

  • IPod mini 1st gen 4gb

    I have an iPod mini 1st gen 4gb. When I click the wheel to advance to the next song nothing happens. The wheel works fine otherwise. I have reset and restored the iPod several times. What am I not doing?

    Robert,
    Besides the scrolling feature built into the click-wheel, there is a microswitch button for each function.  In other words, Menu, Forwards, Backwards, Play/Pause and Center Button each have their own switch that’s activated when you press that part of the wheel. 
    It’s possible that the switch for the Forward function has failed.  Does that button work in ANY menu area.  Do the other buttons work?  If you’re in the middle of an album, can you go backwards in the list of songs?
    I was just working on the click-wheel on one of my Mini a couple of days ago.  I bought a used one and the prev other had some kind of decal over the scroll and the adhesive virtually glued the center button to the rest of the wheel. 
    Hopefully, it’s just the Mini’s click-wheels are they’re available on eBay for about $10 and can be user-replaced, if you’re VERY careful. 
    I also have an old 1st gen Mini that could be a parts donor and could do this for you.  I could also replace the harddrive with a 32gb Compact Flash card and new battery  while the Mini is opened, if your interested.  I’ve done a BUNCH of those and they work great.  I'm even selling one of them on eBay now.
    BWhite62

  • Please Advise: iPod mini 1st gen. questions and issues

    Hi all, thanks for your attention!
    I have, what I believe, is a 1st generation iPod mini - I purchased it in early/mid 2004. I love it, and don't want to just trade it in for one of the newer ones, that do 5 million more things than I really need. I just need my music and contacts, that's all. The problem is that it now only plays about 2 hours before tragically and dramatically dying of "insufficient battery power"!
    The battery life was never great - even when new - about 6 hours of play time. I heard, soon after I purchased it, that they had come out with a "second generation" one that had more than double the battery life. I think I read something about the disapointing battery life of the "first generation" being the reason for the re-release of the updated model.
    Anyway, later I heard (maybe MacWorld?) that the only difference between the two was the battery that was put in it, and that you could take a "second generation" iPod mini battery and swap it into a "first genaration", and voila: you have converted your 1st gen. into a second gen. and more than doubled your battery life.
    Is this true? If not, does anyone know what IS the difference bettween the two generations?
    I am thinking that the best thing to do is to go to the Apple Store and have them replace the battery with a new one, but which one do I tell them to put in? 1st gen., that has poor battery life, or can I get away with 2nd gen., and enjoy the extra longevity?
    Any info would be REALLY appreciated! Thanks in advance amigos!
    15" PowerBook G4   Mac OS X (10.4.9)   I love my G4 - Intel wishes they could be this good!

    Robert,
    Besides the scrolling feature built into the click-wheel, there is a microswitch button for each function.  In other words, Menu, Forwards, Backwards, Play/Pause and Center Button each have their own switch that’s activated when you press that part of the wheel. 
    It’s possible that the switch for the Forward function has failed.  Does that button work in ANY menu area.  Do the other buttons work?  If you’re in the middle of an album, can you go backwards in the list of songs?
    I was just working on the click-wheel on one of my Mini a couple of days ago.  I bought a used one and the prev other had some kind of decal over the scroll and the adhesive virtually glued the center button to the rest of the wheel. 
    Hopefully, it’s just the Mini’s click-wheels are they’re available on eBay for about $10 and can be user-replaced, if you’re VERY careful. 
    I also have an old 1st gen Mini that could be a parts donor and could do this for you.  I could also replace the harddrive with a 32gb Compact Flash card and new battery  while the Mini is opened, if your interested.  I’ve done a BUNCH of those and they work great.  I'm even selling one of them on eBay now.
    BWhite62

  • Ipod mini 1st Gen not seen by iMac or iTunes

    Hi,
    I've looked through the other threats and reviewed and checked the advise given such as check the USB port; Done - iPhone & iPad work fine with th same port and cable. the iPod mini just flashes 'Do not disconnect' its fully charged and plays my music fine through a number of devices.
    I cannot get the iPod mini to be seen by the iMac on 10.7.2 or on iTunes 10. I dont have access to a firewire cable and reluctanted to buy one on the chance that may not work either.
    First question is the iPod mini on version 1.4.1 able to link with iMac and iTunes 10 and if so how? Thanks
    Stephen

    I'm having the exact same problem, have tried everything listed on this page and the device manager steps. Nothing extra comes up when I click on "show hidden devices" the exact same listings are still there. And there is nothing indicating an ipod mini in the USB section in device manager or "unknown device" or anything.
    The other user said "thank you yes have tried this and message is as follows: windows cannot start this device because its configuration information (in registry) is incomplete or damaged (code19)" - but nothing like that is coming up on mine. None of the R's make anything different. Am I doing something wrong? Can anyone give me a hand?
    Ipod Mini   Windows XP  

  • IPod mini 1st Gen. Display problem

    Hello everybody!
    I've got a problem with my iPod mini display: In the last few weeks the display got brighter and brighter.. or should I say I lost the contrast? .. so now I can't see anything on the display. The iPod works very well but I have to use it blind And the problem ist not solved by using the contrast settings! But now I can't see the seetings anyway I think, the display is internally damaged or something like this..? Do you have any idea? Thank you very much for your help!
    Greetings from Hamburg, Germany
    Marco
    iMac G5 20   Mac OS X (10.4.5)  

    Did you try these?
    The Five Rs.
    If nothing helps, and you think it needs repair, you can arrange online service here.
    Service request.

  • What type of games will work on my ipod mini 1st gen

    i got my new ipod mini yesterday  and its my first ipod and i want games but i dont know what type of games will work on it?

    There are no games available for the iPod mini in the iTunes Store.  Sorry.
    B-rock

  • Ipod mini (1st gen)  doesnt lyk me :(

    hi,
    well i bought my ipod mini from ebay (yea yea i know i shldnt of bt i did) i got it second hand bt its nt too old and was in gr8 condition wen i first got it...i hvnt had much use out of it unfortunatly.....mainly due to my impatience of charging the darn thing!...anyway I tried to update it and then it sed to plug it into an AC adaptor so i went n bought one frm ebay (gotta love that place lol) and tried that bt the screen jst lit up before going blank, i tried to restart it bt nothing, i then tried to hook it bk up to my computer bt nothing happened...even tried a faster and better computer at uni bt nuthing happened there either....so if you cld PLEASE help me id be so thankful if nt have a gd day and i hope you also find wots wrong with ur ipod lol
    kind regards,
    mallee >i<

    Woah...that was quite a post. In the future, if you could please use whole words (let alone punctation), that would make it much easier to read. No offense, but proper grammar is much easier to read.
    Ok. Do these help?:
    Resetting iPod That is Unresponsive
    iPod Won’t Turn on Article
    iPod Will Not Turn On thread
    I hope this helps!

  • Dead iPOD mini (1st gen.)

    Okay, so I read the posts before me to see if anyone had the same problem I have but no one seems to. When I turn on my iPOD, the apple logo stays there for about 10 seconds and then switches to another screen. The screen has a picture of an iPOD with two x's for eyes on the iPOD screen (denoting that it's dead) with a frown. (That would be so funny if it wasn't for the situation). At the bottom it has www.apple.com/support/ipod. So I came here. What do I do? Please help someone!!!
    P.S., I already tried the hold bottom thingy and pressing the menu and select button. Nothing is working.

    wait...i have another question
    okay so now im reformatting it
    iTunes prompts me to plug it into a external power, and i did that
    but when i plug it back into the computer,
    it repeats the whole cycle again...
    can anyone tell me how i can fix this problem?

  • Running Diagnostics on Ipod Mini 1st gen...r/o

    Doing the HDD TEST
    and it shows FW PWR.
    I know firewire power...
    How do I get it to regular usb power? Or what?
    excuse my ignorance...I don't have a firewire connection..

    Did you try these?
    The Five Rs.
    If nothing helps, and you think it needs repair, you can arrange online service here.
    Service request.

  • Ipod mini 2nd gen 1 gb: not detected by laptop (win 7 64 bit), if detected: error during autofill and cannot be restored, please help :D

    My laptop does not detect my ipod mini (2nd gen 1 gb), when i connect it the orange light flashe 2 or 3 times then nothing happens. if ever that it will be detected by my laptop and when i sync music on it there will be an error and itunes will suggest to restore it to its factory setting and if i choose to restore it error 3194 happens. so my top priority of course is for it to be detected then fix the latter. please help any will be much appreciated

    This is an Answer for a Possible Solution. It worked for me and is still working. The issue I was having with my 64 bit vista, was Apple Mobile Device Service was not being installed, I dont know why. But I disabled any active running program through MSCONFIG, to allow a clean uninterrupted install of ITUNES 8.02. This allowed AMDS and drives from ITUNES to install. Hope this works for most of you.
    APPLE, please review your Support Methods. Re-installing doesnt help an issue that resulted from installing.

  • IPod Nano 1st Gen Replacement Program Problem

    I recently sent my iPod Nano 1st Gen off for the replacement program.
    I wanted to make sure I would be receiving a refurbished 1st Gen back, not one of the latest gens, so I called Apple Care to confirm this.
    I'm really fond of the 1st Gen and would like to keep it as a collectors item, plus mine was in relatively good condition as well (And absolutely love the scroll wheel).
    The woman I spoke to at Apple Care assured me that I would receive a refurbished 1st Gen iPod Nano, she was very clear on this.
    I sent off and just received a box in the mail with replacement. To my dismay, they replaced it with a 6th GEN.
    I don't want to sound ungrateful, and I do appreciate Apple keeping up customer service even for old Apple products.
    But I specifically asked if a 1st gen would be returned to me, which was not the case.
    I called Apple care again today, and they said they didn't have the stock and provided me with whatever they could.
    Had I been told there was a chance I wouldn't receive a refurbished 1st gen in return, I wouldn't have sent it off in the first place.
    Can't be too upset with Apple, but not particularly happy. Any advice would be appreciated.

    I just sent a request for the shipping materials today, and if I get back a refurbished 1st generation nano, I'll be more than happy to trade it for your 6th generation

  • Where can I buy a charger for an ipod mini 1st generation

    Where can I buy a charger for an ipod mini 1st generation

    I believe that is a 4th gen iPod.  When you say "charger," do you mean the USB docking cable?  Or do mean a USB power adapter that you connect to a wall outlet to charge the iPod?
    If it's the docking cable, it's the standard USB docking cable
    http://store.apple.com/us/product/MA591G/C/apple-30-pin-to-usb-cable
    If you happen to have a Mac with a FireWire port, the 4th gen iPod actually ALSO works (better) over a FireWire connection.  But you'll have to look for an old FireWire docking cable on eBay (or other online source).
    If you are asking about a USB power adapter, this is the lowest power version from Apple, and it works with the 4th gen iPod. 
    http://store.apple.com/us/product/MD810LL/A/apple-5w-usb-power-adapter

  • IPod Touch - 1st Gen - iOS 3.1.3 "can't connect"

    Hello I have an iPod Touch - 1st Gen with iOS 3.1.3.  After each update of iTunes I get this same problem... I'll connect it to the PC and then iTunes will see it and start to sync up.  After a min or so it will say that it can't sync because it can't find the iPod...  Can someome help please?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Try another cable and USB port
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or               
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

  • IPod Touch 1st gen - cannot connect to wi-fi

    Hi,
    Am having a persistent wi-fi connection problem with my iPod Touch 1st gen, which I just bought second-hand. Any advice gratefully appreciated, as I have not been able to find a solution on the forums so far.
    THE PROBLEM
    The iPod detects the signal from my home wi-fi router. When I try to connect, it invariably gives the error message "Unable to join the network [name]". I have 2 laptops and an iPhone running on this network with no problems.
    TROUBLESHOOTING TRIED
    - upgraded to latest version of iTunes
    - upgraded to latest version of iPod Touch software
    - upgraded to latest version of router firmware
    - removed all encryption on wireless signal (no WPA/WEP etc enabled)
    - reset wireless settings on iPod
    - removed all content from iPod & did a full restore & resync
    Please help! Thanks in advance

    I had the same trouble for about a year. Tried everything. This finally did it-
    settings-wifi-other
    manually enter network name, select WEP for security
    enter password once network found
    After this, the network address field was still initially blank, I toggled back and forth, then the address info just appeared, all good after that!
    Everything else was a waste of time
    It may help to clear Safari history and cache first (mine happened to be cleared after the unsuccessful reset}
    Apple called it a hardware issue, and wanted me to send it in. Repair cost was near or more than replacement cost. This all started after 2.2.1 update - my best assumption was that the update over-clocked the wifi, and fried it. That didn't make sense to me, as it could still show the networks.
    Hoe this helps you. The itouch was running 3.1.3 when I tried this last night.
    Hope this helps! Reply back with your success stories!

  • Is my Ipod Nano(1st Gen) an affected Ipod Nano that is eligible for the Replacement Program ?

    My Ipod Nano (1st Gen) was produced in 2006 during week 06 of February.
    It states here:http://www.apple.com/support/ipodnano_replacement/
    that "Affected iPod nanos were sold between September 2005 and December 2006."
    I don't recall which year I brought mine...
    If I send it in and there is nothing wrong with it, I will be charged diagnostic fees and such. I want to make sure it IS indeed an affected nano before I send it in to avoid the fees and the hassle.
    Thank you in advance for your help !

    It should be included unless you already had the battery replaced by them for some reason. They won't ship you the box unless the serial number matches a recalled model and they won't charge you if something is wrong, they will just ship it back to you. You will get a 6th generation nano in silver, not a 1st gen.

Maybe you are looking for

  • How to parse crystal report query prompt value via url parameters

    HI All, I am creating a employee detail report in crystal report. The recordset is huge and i have created a parameter prompts in the query and thinking to parse the prompt value via url parameters. Not sure why i still could not make it works. for e

  • ALSB 3.0 : Request message works in Test Console but not from Client side

    By invoking a Web Service operation through a signature/encryption enabled Proxy Service in the ALSB Test Console for Proxy Services, i get a successful response. Now when invoking the operation from a client application i get the following error res

  • Header errors in when using includes behaviour

    I have created a left menu and used SSI to insert it into various pages. When I apply the logout user server behavior to the menu and open a page I get the following error. (using DWMX 2004) quote: Warning: session_start(): Cannot send session cache

  • How to know that interMedia services is available

    Hi there, I am very new in Oracle technology (administration). We have server with Oracle 8i database installed on SUN UNIX box. Currently our developer want to explore interMedia as their tools. I was not the person who installed the Oracle in the s

  • Read parameters in a dynamic page portlet?

    Hi, Is it possible to read input parameters in a dynamic page portlet? Am I missing something if I want to read the input_parameter? <oracle> ftp.p(:input_paramter) </oracle> Thanks a lot.