Compact Flash readers & Nforce problems

Hi all
I am having problems with compact flash readers and Nforce.
Computers:
(1)
MSI Nforce MB(orginal Bios from day one), TB 1400Mhz, 1.5Gb DDR2100 RAM, 20Gb Maxtor HD, 40Gb Maxtor HD, 80Gb Maxtor HD, DVD, Cdrw, 56K modem, Promise Controller card 431watt PS. Running Win2000 Sp2
(2)
MSI Nforce MB(don't remember bios), XP 1800+ , 512Gb DDR2100 RAM,  40Gb Maxtor HD, DVD, Cdrw, 56K modem, 400 watt PS. Running Win2000 Sp2
Here are the Readers:
Sandisk, Lexar, and the camera D100 Nikon SLR Digital
The lexar restarts both computers when you insert the Compact flash card
Sandisk works intermittenly and sometimes causes the computer to hang
Camera also works intermittenly and sometimes causes the computer to hang
I also have a Dell Inspiron 8000 with a P3 900Mhz, and all the readers and the camera work flawlessly.
Any ideas?, what is causing the conflict.
updating drivers? bios?????
Thanks for the help
Erik

That's strange, I use a crappy 15 dollar "dazzle" mem stick reader with my sony cam and it works well. you may want to try another brand of reader. -sorry not much help. Are they USB or serial/parallel port?? mine is usb. Not sure why it works in your Dell, I'd be willing to bet that it is due to some kind of enumeration problem. I'd just get another brand of reader and take those back if possible.

Similar Messages

  • Compact Flash to Expresscard problem

    I just got a brand new 17" Macbook Pro. Along with it I've purchashed a CF to Expresscard reader to get the images from my Nikon D700 into Aperture. But it's simply not working.
    When I plug the card into the reader and the reader into the Expresscard slot, I get a small icon up near the clock (it's a small square icon) with the option to "Power off card" when I click on it. It also says "IDE Controller". I can't get the Compact Flash card to show up on my desktop, in Aperture, or in Image Capture.
    Any help with this issue would be greatly appreciated! I've never used an Expresscard slot before, so I don't know if there's anything that I need to be doing differently. I can't imagine having to install drivers for the CF to Expresscard reader, but I guess anything is possible.
    Thanks a lot in advance for any assistance.

    It is this card:
    http://www.amazon.com/CompactFlash-Adapter-Express-ExpressCard-Support/dp/B003XQ S7RQ/ref=sr_1_16?ie=UTF8&qid=1313253634&sr=8-16
    It is not showing in Finder, Aperture or in Image Capture.
    I believe I have the latest firmware as the Macbook Pro just arrived from Apple 2 days ago - how do I know for sure?
    Thanks.

  • Problem with Plugging in Compact Flash Card

    I am having a problem now when I plug my compact flash card in to download pictures.  When I plug the card in, the AutoPlay window pops up, as it always does.  However, I also get another window that pops up and says "Lightroom must quit because catalog named Lightroom Catalog.lrcat is not writeable and cannot be opened.   This could be caused by incorrect permissions or because another Lightroom application is using the catalog.  You may select a different catalog the next time you run Lightroom  by holding down the control key while Lightroom launches."
    This problem started yesterday.  I had just upgraded to LR 3.5 the day before the problem started.
    Couple of other things:
    1.  Lightroom was not launched at the time I plug in the card and this problem has occurred.   In fact, I just restarted my system a shortwhile ago to test this problem, and it happened again.
    2.  My Lightroom catalog is actually called Lightroom 3 Catalog.lrcat, not Lightroom Catalog.lrcat.
    3.  I have never had my system set up to automatically launch Lightroom when my card is plugged in.
    4.  I have not actually downloaded any pictures from a card for about 2 weeks before I did yesterday, so I cannot say for certain whether or not LR 3.5 is the cause of the problem and perhaps something else is.  But the fact is that I did upgrade to LR 3.5 a few days ago.
    5.  Once I close both the AutoPlay window and the LR dialogue window, I can launch LR 3.5 with no problem and import pictures as I normally do.

    Your description of what you've done and the code you show does not match what the tutorial says to do and what code to use... (there is no stopAndGoTo() function in Flash).
    Right-click the second frame on the upper layer labeled Actions and select Actions. Copy and paste the code below to make our preloader functional.
    if (_root.getBytesTotal() != _root.getBytesLoaded()){
    gotoAndPlay(1);
    bar_mc._xscale=(_root.getBytesLoaded()/_root.getBytesTotal())*100;
    loader_txt.text=Math.round((_root.getBytesLoaded()/_root.getBytesTotal())*100)+"%";

  • Zio compact flash card readers

    anybody know where to get updated drivers to enable a ZiO! (Microtech) compact flash card reader that can faciliate importing photos to the MacBook Pro?

    Zio was acquired by smartdisk (www.smartdisk.com). They have drivers fro the Zio line of card readers, but do not state that they are intel mac compatible. YMMV.
    MBP 2.16   Mac OS X (10.4.6)  

  • Problem loading Compact Flash to PSE6

    Never had a problem until today.
    Loaded a SDHC (NEF files) no problem. Tried loading Compact Flash (NEF files) and got the following message:
    "Nothing was imported. The file(s) or folder(s) selected to import did not contain any supported file types, or the files are already in the catalog".
    The files are not already in the catalog and I was able to view the Compact Flash images in the camera so I know that they are on the card.
    HELP!!!!

    Do you have updated camera raw version installed? Which Nikon camera is it. You may try downloading the latest camera raw(ACR) version and replave the file in your plugin folder at your installed locatio. Let me know if that works.
    ~V

  • WAE NM 502 Compact Flash problems

    HI,
    I' am having problems with the Compact flash card. WAE does not want to boot. When I use a CF card from an another WAE NM it works flawless.
    I have a another CF card but I don't know how and what to copy on it.
    For what is the CF card used in the WAE NM

    Smail,
    Your best bet is to RMA the entire network module, as none of the parts are intended to be field replaceable.
    That being said, the system software is what gets loaded on the flash. You can recover the system software using the procedure documented here:
    http://www.cisco.com/en/US/partner/docs/app_ntwk_services/waas/waas/v413/configuration/guide/maint.html#wp1105252
    Regards,
    Zach

  • Sandisk Compact Flash problem

    I have an older Canon Digital Elph S250 digital camera that uses compact flash media. The CF card can be read fine through a card reader on my desktop Windows XP computer. But when I try to read the card on my Mac using a CF USB reader, it tells me that the drive cannot be read by a Mac. The file system used appears to be FAT 16, which is an older DOS file system. Any ideas about this? Do more modern cameras with a different kind of flash card use a different file system that can be read on a Mac? I would like to be able to read the cards on either of my computers. I want to load the pictures on the desktop since I have automated backup there, but I sure prefer to use my Mac to look at and manipulate the photos. But I don't want to have to transfer from one computer to the other every time over my wireless network.

    It shouldn't be, since I'm using a very high-quality power supply, an Antec TruePower 330.  I also can't imagine a USB card reader to use enough power to cause problems.  It really doesn't use any juice anyway until you put a memory card in it.
    Also, if I plug it in after Windows has loaded it will recognize it right away every time.  I think if I plug it in while Windows is booting it will freeze the boot process until I unplug it again.
    Here are my system specs:
    MSI KT4 Ultra v1.0 (MS 6590) w/ v1.3 BIOS
    Athlon XP 1600+
    1 stick 512MB PC2700 (DDR333) Micron/Crucial memory
    Antec TruePower 330W
    Nvidia Geforce4 Ti 4200 128MB AGP 8x
    Western Digital 20GB 7200RPM
    Lite-On 32x CD-RW
    Intel Pro 100 NIC
    Soundblaster Live! Value
    Microsoft Optical USB mouse
    Sandisk CompactFlash card reader

  • VG224 COMPACT FLASH PROBLEM

    The problem is when the vg224 boots, the vg keeps on rommonitor and said: compact flash not present (already inserted in slot 0 with IOS), then on rommonitor I executed this command:
    boot slot0:
    And the vg comes up normally, I already point the the boot-system to: boot system slot0:vg224-i6s-mz.123-11.T8.bin
    May be the compact-flash is corrupted?
    Thanks

    Perform a disaster recovery from rommon and get an IOS image from a local TFTP server into the internal flash.

  • 2821 compact flash problem

    Hi all,
    I have a problem with a compact flash of a router 2821, i tried to upgrade the IOS version or the router when i restarted the router went to rommon and it does not recognize the flash, it saids that there is no flash available on the router. Any idea on what to do? i have tried to recover from xmodem but i have the same anser no enough space for the ios file.
    Regard.

    Common Problems in Installing Images Using TFTP or an RCP Server:
    http://www.cisco.com/en/US/products/sw/iosswrel/ps1831/products_qanda_item09186a00800a775f.shtml
    Document for IOS Upgrade procedure:
    http://www.cisco.com/en/US/products/hw/routers/ps259/products_tech_note09186a00801fc986.shtml

  • My Macbook Pro won't read my Compact Flash card

    Here’s the problem.
    Mavericks won’t acknowledge the existence of my Compact Flash card when presented in a card reader (I have tried two readers). It is a card I have been using with Lion on my Macbook Pro for some time quite happily.
    There is nothing wrong with the card; it works just fine in our Windows machine and in my camera.
    My Compact Flash card is a Kingston 4Gb card. It was formatted in the camera.
    The camera was bought approx 2003. Its a digital Pentax Optio 33GS (top of the range at the time shooting 3.2 megapixels!).
    On my Macbook Pro 15” (bought new approx 2010) the card does not appear in Finder but does appear in Disk Utility.
    The information for the main entry on the LHS in Disk Utility is displayed as follows:
    Disk Description: 4Gb Generic Storage Device Media
    Write status: Read/write
    The sub entry which appears as disk1s1 on the LHS is:
    Mount point: Not mounted
    Format MS-DOS (FAT16)
    I  attempted to erase the Card using Disk Utility; I selected the main entry on the LHS and I chose the format MS-DOS (FAT). This returned a Disk Erase Failed msg “Wiping volume data to prevent future accidental probing failed.”
    I then tried again, this time selecting Windows NT File system (Tuxera NTFS) as I have Tuxera installed. This did not work either; it failed with the same error msg.
    OK so then I tried Mac OS Extended (Journaled) but this failed as above also.
    I am not quite sure why, but when I reinserted my card into my camera, my camera could not read the card so I had to reformat the card within the camera.
    Oh yes, I also tried rebooting my Macbook with the card inserted but this made no difference.
    I have run our of ideas. All help gratefully received.
    Thank you. Carol
    PS ... apologies to anyone who saw my previous post in which I referred to my card as an SD card when in fact it is a Compact Flash card
    MacBook Pro, OS X Mavericks (10.9) 
    I have this question too (0 

    Okay, I am making progress here now.
    Using the link in my message above timestamped Dec 13, 2013 4:24 AM, I filed a tech support request describing the problem. Because they asked for details to confirm that the problem was with their product, I copied and pasted pretty much verbatim the text from my message above.   
    Around noon, same day, I got a message back from technical support saying they were sorry for the problem and would provide me with a replacement unit. Two hours later, I got a message from their RMA department saying that because the product has a two year warranty, they needed a copy of my receipt. I located a copy of my receipt for the purchase from Amazon on September 10, 2012 and forwarded that to them.
    At this point, I am optimistic that it's going to work out okay. So far, I am very impressed with the responsiveness of Kingston's technical support and customer service departments.
    If I actually do receive a working replacement, I will post an update here.

  • Expresscard/34 Compact Flash card reader?

    Does anyone know if there is such a thing as a Expresscard/34 Compact Flash card reader?
    Thanks
    Mark

    Yes, all pro digital photographers use CF cards and most use FireWire card readers. The rest use USB2 card readers.
    Many of us keep a $7 PCMCIA card adapter for emergency backup but rarely use it because it is sooooooo sloooooow. It also takes over your computer not allowing you to do much else during the downloading of photo/files.
    Do that a few times and you see the need for upgrading to a new standard.
    It would be nice to be able to just pop a card into the side of the laptop without plugging in a reader.
    On the other hand - Sprint and Verizon do need to make an Express/Card 34 for internet access. I may be getting a MacBook Pro next month and not being able to connect to the internet from anywhere is my biggest fear, more so than the PhotoShop problem.
    Steve
    homepage.mac.com/daddysteve

  • Compact Flash Drives/Other Probs Mega 180

    I've had my MEGA 180 for almost two weeks and like many here it has been a pain in my butt.
    After reformatting and installing the software in a certain order I finally got my system somewhat stable, but I am running into new issues now.
    My compact flash drives no longer show up in my computer, I can't find them in Device Manager either.  Also every now and then my network card will only send not receive.  Tried different cables and it's no help.  It may also be my cable modem, but I don't know.
    I'm not running the nForce IDE SW driver because if I do I get the eject button lock-up problem people are having, but the performance leaves something to be desired.
    My PC Alert also died, it was working fine.  Now if it is allowed to boot it will not completely load its GUI and begin to say my CPU is running way hotter than it is and after a minute of 100% CPU it will cut off my computer if not killed.  I just un-installed it for now.  The funny thing is, their Fuzzy Logic program works for getting the temps.
    I'm in a back and forth email wth MSI Taiwan right now, but I don't see it going anywhere.  Hoping like everyone else these issues can be fixed with driver and BIOS updates.  I would be EXTREMELY unhappy to have to go through an RMA process even with companies that have good RMA policies.
    As far as their bundled software, MSI Media Center is the biggest POS I have ever used.  I am currently using ShowShifter and it works REALLY well with my 8606 master tuner.
    Enough ranting for now, if anybody else has similar problems, let me know.  If you have solutions EVEN BETTER!  

    xp sp1a, all patches, etc.
    PC4000 (yes overkill, but I got a good deal on it)
    I had 2700 in it and it still acted the same way so I doubt memory is the problem.
    Now my damn tv tuner is being an ass and is making it so I can only view the cable right in RGB24, not the default YUY2.  In YUY2 it is almost like the brightness settings/contrast settings are all wrong, but adjusting them doesn't do anything.  It worked this morning.
    If I had a dollar for everytime I had said "it worked this morning" with this thing I'd be able to buy something else.

  • Auto-update of 2120 startup application using compact flash

    Just getting started with a 2120, but have one "tricky" question.  I want to have my executable run off the controller's memory, not the compact flash; however I also want the executable to check for software updates on a compact flash card.  In other words, if there is a compact flash card present when the app (controller) starts, and the executable on it appears correct (size, name check), then copy the file to that controller's startup folder to replace the existing app...  The executable would bypass normal operation at that point, provide LED feedback to alert the user to reset the controller (& remove card), and "voilà"!  We have an almost automatic compact-flash updatable, self-starting application...
    Question(s):
    - do I need to worry about whether I'm building the app to the controller's memory, to compact flash, or locally (to later copy onto compact flash)?
    - are there any issues with having a program copy an update over itself in this way (different types of memory, when used, etc...)? Alternative would be to have a 2-stage app: 1 checks for update, launches the 2nd if no update (single app would be cleaner)
    - am I missing anything else?
    Thanks,
    Phil

    Hi!
      If I understand correctly... You can do following steps:
       - you develop your application for cFP2120, and download it to cFP's C: disk, then you can copy it to a compact flash. I am referring to a "developing" cFP2120.
       - in field, you have another cFP2120, running an application that you created before, and you insert compact flash with new exe.  You reboot controller.
       - the resident application checks for updates, and find it on CF card.  This boot application copies executable from CF to C: disk, (maybe better if you use .par extentions until opy does not finish!).
       - You manually (or programmatically) reboot controller with new application.
       This was my idea, but, because of customer doesn't asked me to proceed in implementing it, so I stopped, but I'm always interested in knowing if this can work.
       Some problems with this may be the coerence of libraries.....  Please, if you find this way succesful, let me know....
       Another possible solution is to use the "open VI reference" method, but I am not used with it.....
       Hope I wasn't too confusing
    graziano

  • Any card reader to transfer Compact Flash Raw photos to Ipod 5G

    Hi I have a Canon 10D digital camera and have a 2Gig Compact Flash Card, I would like to know if there's any compact flash card reader for Ipod video (5th Gen Ipods) so I can use it as a Hard Drive and transfer my RAW photos to the Ipod.
    Any suggestion o this or tips on this kind of card reader for Ipod.

    Hi vchavez,
    I've got a Nikon D70, use it with camera connector and the Belkin Hi-Speed USB 2.0 15-in-1 Media Card Reader/Writer (model no. F5U249ea) google it!
    Works fine, there was a website with a list of compatible card readers, but it seem to have took the article away, the belkin above was the one on the list, thats why i got it!
    Happy Shooting.
    - Mike

  • Images can be viewed when inserting compact flash card but many just black when imported. What's up?

    When I insert the compact flash card containing 158 images (Raw+jpeg Fine) into the Mac I can view all images, however after I import them only about half of them can be viewed. The remaining images are blacked out even though the info for each image is available. The card was reformatted prior to use. What do you think the problem might be?

    Upload off the flash card to a folder on your Desktop (can be done with Image Capture) and see if they can be viewed with Preview. If the can  launch iPhoto with the Option key held down and create a new, test library.  Import the photos and test to see if the same problem persists.
    Also make sure that the RAW files from your camera are supported by the operating system and iPhoto.
    OT

Maybe you are looking for