Compact presario c700 ( C738TU) audio and video driver

Please help with this.. i need the driver of the following for my unit..
-ethernet device
-audio and video device
-vga controller
-modem device on high definition bus controller
-SM bus controller
can anybody knows on how can i get those drivers... i already tried the driver from the sites of hp but still not working.. hope somebody can help me through with this
thanks...

Intel Chipset:
ftp://ftp.hp.com/pub/softpaq/sp36501-37000/sp36880.exe
Intel Graphics:
ftp://ftp.hp.com/pub/softpaq/sp38001-38500/sp38326.exe
Realtek 8139 Lan:
http://tinyurl.com/2qva6t
MS UAA Hotfix:
http://www.mediafire.com/?4ben9zlesng
Conexant SmartAudio 221:
http://cid-3f10d7c1771f7efe.skydrive.live.com/browse.aspx/Public
Unzip to a folder...use Device Manager.
From Device Manager,right click "Audio Device on High Def Bus",choose Update driver,
No to connect,
Install from a list or specific location,
Select Don't Search, I will choose the driver to install,
For the Hardware Type select 'Show All Devices'
Remove the check from "Show Compatible Hardware" and click on "Have Disk".
Next...browse to the unzipped folder and choose the "WiSVHe5.inf".
Ignore XP when it complains.
Reboot.
Conexant Modem:
ftp://ftp.hp.com/pub/softpaq/sp37501-38000/sp37982.exe
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Similar Messages

K9A2 Platinum Audio and Video Driver problems.

I put together my new rig last night and am having a lot of problems with drivers. The rig installed windows XP SP2 in about 10 minutes though
Rig:
MSI K9A2 Platinum Bios 1.3
Phenom 9850 BE
G.SKILL 1066 5-5-5-15 2T
MSI HD 3870 OC
WD Raptor
CoolerMaster 550watt
Several fans to keep cool air flowing.
My problem is that I can not find good audio or video drivers. I started by trying the audio drivers included with the board, but they would not complete the install. I ended up downloading audio drivers from the MSI site, however they also would not install with the "#-0001" error message. I followed the instructions on the forum: https://forum-en.msi.com/index.php?topic=115396.msg866810#msg866810 including installing the MS HD Audio Driver Hotfix but still cannot get sound working.
To further complicate my problem the 3870 has HD onboard, which makes a second instance of Microsoft UAA HD Audio driver in the device manager, and also tries to find drivers for bits of it's audio hardware.
Currently I have disabled on-board audio completely through the bios, and now everytime I boot-up I get new hardware found for UAA HD Audio, and also some Media interface. Clearly this is the HD on the 3870, however I can't seem to get drivers installed that will agree with the hardware thus the message continue to pop-up!
Does anyone have suggestions or similar experiences?

Quote from: AMDloyal on 24-April-08, 09:56:10
Thanks for the links.
The standard AMD ATI Drivers + South Bridge chipset drivers worked flawlessly. I've made a clean run through 3dmark06 so i feel good about them.
As for the audio.
I've worked through both of those suggestions but haven't gotten anywhere. A few times I have been able to get the drivers to install without the "error code -0001" message, but that doesn't give me sound. Under device manager I still end up with yellow exclamations. It seems no matter what I disable or try to do nothing works. I've tried updating drivers manually like was explained in the first link, but when the update is complete I get the messages lile: "There was a problem installing this device MEDIA An error occured... The data is invalid"
Does anyone know if this indicates a hardware of driver problem?
"Thanks for the links.
The standard AMD ATI Drivers + South Bridge chipset drivers worked flawlessly. I've made a clean run through 3dmark06 so i feel good about them."
you are done well.
As for the audio.
I've worked through both of those suggestions but haven't gotten anywhere. A few times I have been able to get the drivers to install without the "error code -0001" message, but that doesn't give me sound. Under device manager I still end up with yellow exclamations. It seems no matter what I disable or try to do nothing works. I've tried updating drivers manually like was explained in the first link, but when the update is complete I get the messages lile: "There was a problem installing this device MEDIA An error occured... The data is invalid"
Provide screenshot from Device manager.

I am new to iMovies. When I make a video using the mic and camera in my Macbook Pro, the audio and video are not in synch. Very annoying. How can I fix this?

I am new to iMovies. When I make a video using the mic and camera in my Macbook Pro, the audio and video are not in synch. Very annoying. How can I fix this?

DVD drives read the bottom of the disk, not the top. Smooth out the paper & try again.

Audio and video sticking and jumping after installing windows 8.1

Hello,
I have a HP Pavilion G6 - 2292sa
The product no is C1Y93EA#ABU
I have recently upgraded my system from windows 8 to the windows 8.1 update. Since I updated my audio won't work properly at all. During random intervals when playing songs on itunes the song will jump and stick for a few seconds then continue playing with random jumps like this throught all the songs. When I watch a music video on youtube the audio does the same thing as it does in itunes as well as the video sticking and jumping. I have tried an audio fix I saw on the HP forums that suggested I delete the hd audio driver, hard reset then reinstall them but this didn't have any affect what so ever. This is a huge problem since I can't watch netflix, listen to songs or pretty much do anything media related.
Any help you could give would be really apreciated.

Hi Greum,
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I see that after updating to Windows 8.1 your audio and video sticks or jumps and you have been unable to resolve it. You have tried uninstalling and reinstalling the audio driver to no avail.
I suggest you run The HP Support Assistant to look for updates and help resolve issues. You also have a built in troubleshooter in Windows 8 and 8.1.
Press the Windows key +C to open charms
Type troubleshoot audio/video and press enter
Follow the on screen prompts.
If these steps have failed to resolve the issue, I suggest you do a recovery back to factory and then retry the update.
Performing an HP System Recovery (Windows 8). You will see an option to backup your personal files during this process, if you have not done one yet, I suggest you do one now, to prevent any data loss. Restoring Files that were Backed Up Using HP Recovery Manager (Windows 8)
Here is a link to a document to assist you with updating.Updating Windows 8 to 8.1. Please let me know the outcome.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Does 2 firewire audio and video interface can work together on FCP ?

hello,
My audio interface is a TC Electronic Konnekt 24D
my video interface is a Canopus ADVC 110
my hard drives are plugged in firewire too
and I use Final Cut Pro 5.0.4
So, the konnekt is recognized by FCP only when the Canopus is not plugged. And even then, the audio sometimes drop out and sometimes causes the app to crash, so that I have to trash the preferences
When I plug the Canopus, the Konnekt 24D is recognised by OS X but not FCP
I want to use the voice over tool with the konnekt 24D, so what should I do ?
Does 2 firewire audio and video interface can work together ?
If so, maybe I only have a driver problem from TC Electronic.
But if not, I have to change this interface. Let me know if only RME, MOTU, Presonus and Edirol work, as it is said on apple's webpage for hardware compatibility
thanks
eMac G4 1,25 Ghz Mac OS X (10.3.9)
eMac G4 1,25 Ghz 1 Go RAM DDR Mac OS X (10.3.9)

The 1082 does show up as a possible input when I open
the VO tool.
Ok. So an audio interface can be plugged to FCP without crashing the app. Because of the Konnekt driver problem, I wasn't shure of this.
I use my Aja box for export & external monitoring.
All my audio sources run back into the Tascam and I
use the analog mixer in the 1082 to monitor different
sources.
When I view external video, the audio follows it to
keep sync.
that's exactly what I want with other I/O interfaces. I'd like to monitor video with the canopus ADVC 110, and monitor audio with the Konnekt 24D (or another interface if this one is not compatible)
I also imput dailies with a deck or a camera (DV or HDV) but that's not the point here.
I want to imput audio with the Konnekt 24D because of its audio quality. Not audio sync to video dailies. But voice over, in sync with FCP video playback (for me, tha ADVC 110)

Audio and Video issue with Windows 8.1 upgrade on Ideapad n585

I upgraded my Ideapad N585 to Windows 8.1 the other day, took forever, but it made it through. Unfortunately, I now get boot erors for the Dolby software, and the AMD Vision/Catalysyt Control Center. Neither of these programs are able to start, from startup or even manually. They just won't run. Sound seems to come out fine still, but I do have video issues.
First off, my computer doesn't seem to recognize a HDtv as a monitor through the HDMI port. I still get an image, but it's set to current screen resolution instead of 1080i. I tried using the detect button to force it to look for a second monitor (my TV), but it showed nothing connected, though at the time I was using two screens. Now my monitor's screen resolution seems to be a little higher than my TV's, but it doesn't fit the screen properly, and will sometimes put a black border around the desktop, not using the full screen. I have also noticed, that when plugged into the tv, if a background program like a screen saver starts (and I am one of the few people who still use them, I like BOINC, sue me), it will reset the screen resolution to what it requires. When the program exits, the screen resolution stays, and that becomes the new max screen resolution until I restart the computer. So far, it only does this through the tv, if I run the laptop monitor alone, it doesn't happen.
I did try updating the software with what's available through the support site, but nothing happened. I even went as far as to use the Windows 9x~XP standbys of completely uninstalling, manually removing everything from the system registry I could find relating to these two programs, and then finally reinstalling the software. Giving the audio and video a complete clean slate to work from, and got no positive results. I restart the computer, Dolby and Catalyst won't boot, and blind to HDtv. Problems as described above still apply.
Anybody else have this issue? Anybody got a fix?

have you found a solution to this?
My computer updated to 8.1 without my wanting it to, I have the same problems as you. I installed the video driver because the brightness was locked on what I had it. (the bar would move but did not change)
I searched for brightness and n585 and I was able to find a driver, now brightness works but HDMI still does not. When I plug in the TV both screens go black with all 4 options in the "project" screen.
*edit*
this worked for me i stumbled across this
I unplugged the power cable with the hdmi cable plugged in. Hit (windows key+p) scrolled to duplicate and it worked.I plugged in the power cord back in and it still worked.

8.1 Pro install now have no audio and video play

I have an older G60-443cl and changed out the HDD for a SDD. Installed a new version of Windows 8.1 Pro. Everything works but my audio and video. The audio drivers are installed and working properly (according to my system) but even on the speaker icon where you adjust the volume there is no sound not even the little beep when you change the volume. I went to my adminastrative tools and checked and the following is what i guess i should have:
Open windows Control Panel, open Administrative Tools and open Services. Check that the following services are all showing as Status= Started and Startup Type= Automatic
Audio Service
Multimedia Class Scheduler
Windows Audio
Windows Audio Endpoint Builder
I have all of the item but the top one Audio Service???? Help!!!!! Please!

Hi @L1215 ,
Welcome to the HP Forums!
It is a grand place to find answers and information!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that after changing the drive to a SSD and installing Windows 8.1 Pro you lost your audio. Drivers are showing as installed and working properly but you have not audio.
When I checked the driver page for your notebook I noticed that Windows 8.1 is not a supported Operating System. With this being said HP does not provide the drivers as it is an untested OS on your system. OEM's may and sometimes do alter drivers to perform correctly with your system.
Downloading or Updating Software and Drivers for HP Computers
Here is a link to No Sound from Speakers (Windows 8) to aid in overcoming this difficulty.
The best of luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Capture Audio and Video to different disks or not?

I thought that capturing audio and video to separate disks was more efficient, now I see in the FCS 2 documentation it says that this is not recommended for any of the DV formats. But it does not say why, or what the consequences of doing this are...
Does anyone out there know?
Thanks,
Pete d.

Peter Durso wrote:
Now, Is there any value in putting the render files on a drive that is separate from the Capture disks?
Pete D.
Absolutely. Listen to your drives while doing an intense render. The Capture drive is grabbing all of the video clips in the stack, the system drive is grabbing software. If you render to the Capture drive, that same drive has to write, too. Reduce the load by using a Render drive.
I have four drives: System, Capture, Render, Output. The last is used for all exports, encodes, and transcodes.
bogiesan

Audio And Video out of sync in Final Cut, but not in quicktime

I heave searched the forums to no end to find the solution to this issue, unfortunatley, I have not solved the problem.
I am using Final Cut 4.5 on a G4 running OSX 10.3.4. This system has worked perfectly for years with no problems. Neither the system, hardware, or software has ever been changed on this machine. Suddenly last week, despite perfect sync while previewing the capture, the Audio and Video were of sync in Final Cut, but when checked in quicktime, there were no problems. That is how I eventually figured out this was a final cut problem.
By out of sync, I don't mean it is by a specific number of frames that can be adjusted and then everything is fine, the sync seems to drift so that if you edit the audio to be in sync in one part of the video, it won't be at the end. Also, it is out of sync from the first frame played, not a gradual drift.
This is definitely not an issue of frame rates or final cut settings as will be evident by the steps I took below to find the source of this problem.
This is what I did to attempt to fix the problem:
- Check drives using disc utility and repair permissions
- Remove Final Cut Preferences using Apple guidelines
- Switch hard drives
- Delete Final Cut and reinstall newer version of final cut (since the capture files played fine on Final Cut 5.1 on another machine)
- reinstall entire OSX 10.3.9, wiping the hard drive and reinstalling Final Cut 5.1
- switch ram slots, and even replace ram with different sticks from another G4 machine
None of these solutions worked. Is there some hardware problem with my G4 that is suddenly causing Final Cut to play audio and video out of sync?
Hope you can help, otherwise this otherwise great G4 is going in the dumpster!
Thanks

For what it's worth, I'm having what looks to be the same problem. Driving me insane. Here's what's going on-
Editing in FCP 6.0.2
QT was just updated to 7.3.1 the other day (hmm)
On an MacBookPro machine, OS 10.5.1
Software updater says everything's up to date of course.
DV-NTSC 24p (23.98) Advanced Pulldown Removal (footage was shot at 24PA on a DVX100b)
In Quicktime, the file previews fine, everything's in sync, everyone's happy. In FCP, the video and audio are wildly out of sync. I did a test inside of quicktime and sliced out a small portion of the media clip and did a "save as" and this small slice played in sync in FCP. However, this did not work for the entire clip. Clip is weighing in at 5.58GB for a 32 minute run.
I'm trying to multicam 2 tapes together and manually syncing these up is proving to be difficult at best. When anyone gets any ideas/leads/patches, let us know.
Grr,
Nicole
Editor, RHED Pixel

Audio and video out uf sync

I'm using Premier elements 12. When I open a VOB file, the audio and video are not in sync. I can open that same file with windows media player and all is well. What do I need to do with respect to editing a file like this?
The information about the display on my computer is:
Name NVIDIA GeForce GT 220
PNP Device ID PCI\VEN_10DE&DEV_0A20&SUBSYS_069A10DE&REV_A2\4&22063C0D&0&0018
Adapter Type GeForce GT 220, NVIDIA compatible
Adapter Description NVIDIA GeForce GT 220
Adapter RAM 1.00 GB (1,073,741,824 bytes)
Installed Drivers nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Driver Version 9.18.13.3523
INF File oem38.inf (Section002 section)
Color Planes Not Available
Color Table Entries 4294967296
Resolution 1920 x 1080 x 60 hertz
Bits/Pixel 32
Memory Address 0xFA000000-0xFAFFFFFF
Memory Address 0xD0000000-0xDFFFFFFF
Memory Address 0xCE000000-0xCFFFFFFF
I/O Port 0x0000EC00-0x0000EC7F
IRQ Channel IRQ 16
I/O Port 0x000003B0-0x000003BB
I/O Port 0x000003C0-0x000003DF
Memory Address 0xA0000-0xBFFFF
Thanks,
Pete Blair

Pete Blair
In all your information, I did not see what computer operating system your Premiere Elements 12 is running on? Have you updated 12 to the 12.1 Update, using an opened project's Help Menu/Update? If not, please do so.
Your issue may relate to the details of your "VOB file" and how it was ripped/copied from the DVD-VIDEO and DVD disc to get it into a Premiere Elements project.
a. project preset set for NTSC DV Standard or NTSC DV Widescreen (whichever corresponded to your recording details)...or PAL equivalent.
b. DVD disc in burner tray
c. Add Media/DVD camera or computer drive/Video Importer/.....
It does not happened often, but if audio is out of sync and you are not using the above route, then consider the Command Prompt way described in the
following
ATR Premiere Elements Troubleshooting: PE: DVD-VIDEO/Seamless VOB Ripping
A just in case note, contrary to some, it is not necessary to convert VOB (VTS_01_1.VOB video file and any files in that series) to any other format in Premiere Elements.
Please review and consider and then we can decide what next.
Thank you.
ATR

Audio and video out of sync when using quicktime conversion

hello,
i am editing a hdv project and want to export to quicktime. the client needs it in a specific size (700x394). they do not want the video in the file compressed, just the size of image. they are compressing the video through flash for the web. anyways, i used to just use quicktime conversion, custom size and use 700x394, but now when i do that the audio and video are sparadically out of sync in the product. the wierd thing is that the project plays fine in the timeline, but when i export the problem occours. i then, exported to a full res fcp movie and it is fine. then tired reexporting through qt pro to 700x394. when i did this their were no sync issues but the quality of the file was not so good, it look more pixely, certainly not as good as when i did it using quicktime conversion.
how can i export through fcp to get the 700x394 file? someone said 'use current settings' instead of using quicktime conversion? how do i do this? what do i need to do and what are my settings?
any help is appreciated. thanks a ton in advance.
cheers,
clay

What format are you converting the HDV to?
If it's animation, it is quite possible your computer can't pull the data rate. In this case it would be a processor / hard drive issue not an out of sync issue.
x

Audio and video out of sync on converted AVI file

I am trying to convert a DVD to an AVI for playback on a device. When I import the DVD and publish it as an .AVI the output audio and video are out of sync. After about an hour of playback the audio lags the video by a full second. How can I correct this problem?

Walter0325
If you have Premiere Elements 12 on Windows 8 and you want to rip VOBs from the DVD-VIDEO to export subsequently to DV AVI, here are the details....
1. Do you have DVD-VIDEO standard or widescreen? Set the Premiere Elements 12 project preset manually.
File Menu/New/Project. Set the project preset to NTSC or PAL DV Standard or NTSC or PAL DV Widescreen depending on what you have.
Before you exit the new project dialog, make sure that you have a check mark next to Force Selected Project Setting on this Project.
2. In the Premiere Elements workspace, use Add Media/DVD camera or computer drive/Video Importer to get the VOBs (only the ones in the series VTS_01_1.VOB. Set to a folder in the Save In: location. Check mark next to Insert in Timeline. Hit Get Media.
3. If you have an orange line OVER the Timeline content, press the Enter key to get the best possible preview of what you have on that Timeline.
If after all that, the audio is out of sync, then use the Command Prompt method to get the individual VOBs into a single file with all the VOBs seamlessly merged. This worked nicely for a recent user here. See details in my blog post how to for the Command Prompt way.
http://www.atr935.blogspot.com/2013/09/pe-dvd-videoseamless-vob-ripping.html
Please do not hesitate to ask if you need clarification on anything that I have written.
Depending on your results, more information may be requested about the specific properties of what you have on that DVD disc.
Thank you.
ATR

New Project will not save, re-open with accurate or matching audio and video.

I filmed footage last week. Uploaded it into Premiere Elements and edited the footage in Elements, and saved my work as a project. I opened Elements this morning, and upon opening my saved project I was prompted by the program to locate the file. When I then selected the raw footage files, it loaded the project, but with audio and video out of order, not synced, etc.
How do I save my work as a stand-alone project file with the audio and video synced as I intended, in a format that I can load, share, re-open and work on without having to re-locate the raw video?
This seems to be a basic function of Video Editing software, so I hope it is something small I can adjust and move on from. Oh Also all the files, both project (.prel) and raw footage (.mov) are saved on the desktop of the computer i am using to run Premiere Elements.

brjames1
What version of Premiere Elements are you using and on what computer operating system is it running?
After you have created a project and it has been saved, you should be expected to be able to reopen the project with the
project as before the save/close (some discussion about rendered files remaining rendered, but essentially as written).
When they do not, we can invoke the damaged project syndrome.
The following is an Adobe document on that subject.
Troubleshoot a damaged project file | Adobe Premiere Elements
If you are getting "Where is the file....?" messages when re-opening a saved closed project, typical reasons
a. you have moved, deleted, or renamed files and folders that were imported into the project after the save close...when
you import media into a project, all you get are copies of the originals in the project. But the project needs to trace back
to the originals in the hard drive location where those originals were when first imported into the project.
b. if you store your source media on an external hard drive, the external hard drive may be malfunctioning and/or the
drive letter of the external drive changing for a variety of reasons. Does any of that apply to you.
Please review and consider, and then we can decide what next.
Thanks.
ATR

SCCM 2012 Client and Workstation Audio and Video Problems

SCCM 2012 SP1 environment.
We have pushed out the SCCM Client successfully to our systems - however we have found that on some computers the SCCM Client is causing an audio/video problem - specifically it appears to be with computers that connect monitors via DVI. As an example,
on my laptop (Dell e6420, Win7 x64) I have a docking station that connects my laptop to 2 external monitors. With the SCCM Client installed I cannot listen to music or watch videos - the result is an unusable choppiness/stuttering listening to music
and with a video the audio and video get out of sync. As well, my mouse no longer functions smoothly - it jumps around. This happens whether accessing content from a website or simply a local file on my computer. If I uninstall the SCCM client,
the issue goes away entirely. I have tried disabling the SMS and Remote control services but doing so does not resolve the issue, only a client uninstall. Note that this only happens when the laptop is on the docking station - with DVI - it doesn't
happen when the laptop is running without an external monitor or if plugged into an HDMI output device.
At first we believed this was limited to this model of laptop in our environment (Win8 or Win7 - both result in the same problem), but now we are hearing about "audio and video issues" on Dell 990 workstations as well. I believe these stations
have DVI connected monitors. Driver updates do not appear to resolve the issue.
Has anyone experienced this in their environment? Note that this happens on imaged workstations and workstations installed from a vanilla Windows 7 or 8 CD.

Try installing the client without Silverlight and see if it helps (this is only used for the Application Catalog).
ccmsetup.exe /skipprereq:silverlight.exe
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

How to synchronize audio and video rtp-streams

Hi everyone!
I've tried to make one of the processors, processor1, control the other processor, processor2, with processor1.addController(processor2) but I get a
javax.media.IncompatibleTimeBaseException. I need to synchronize audio and video rtp-streams because they are sometimes completely out of sync.
In JMF API Guide I've read:
"2. Determine which Player object's time base is going to be used to drive
the other Player objects and set the time base for the synchronized
Player objects. Not all Player objects can assume a new time base.
For example, if one of the Player objects you want to synchronize has
a *push-data-source*, that Player object's time base must be used to
drive the other Player objects."
I'm using a custom AVReceive3 to receive rtp-streams and then I create processors for the incoming stream's datasource's, and they are ALL PushBufferDataSource's.
Does this mean I can't synchronize these. If so is there any way I can change them into Pull...DataSources ?
How are you supposed to sync audio and video if not with as above ?

camelstrike wrote:
Hi everyone!
I've tried to make one of the processors, processor1, control the other processor, processor2, with processor1.addController(processor2) but I get a
javax.media.IncompatibleTimeBaseException. I need to synchronize audio and video rtp-streams because they are sometimes completely out of sync.
In JMF API Guide I've read:
"2. Determine which Player object's time base is going to be used to drive
the other Player objects and set the time base for the synchronized
Player objects. Not all Player objects can assume a new time base.
For example, if one of the Player objects you want to synchronize has
a *push-data-source*, that Player object's time base must be used to
drive the other Player objects."
I'm using a custom AVReceive3 to receive rtp-streams and then I create processors for the incoming stream's datasource's, and they are ALL PushBufferDataSource's.
Does this mean I can't synchronize these. If so is there any way I can change them into Pull...DataSources ?The RTP packets are timestamped when they leave, and they are played in order. You can't change the timebase on an RTP stream because, for all intensive purposes, it's "live" data. It plays at the speed the transmitting RTP server wants it to play, and it never gets behind because it drops out of order and old data packets.
If your RTP streams aren't synced correctly on the receiving end, it means they aren't being synced on the transmitting end...so you should look into the other side of the equation.

Compact presario c700 ( C738TU) audio and video driver

Similar Messages

Maybe you are looking for