Compact web-server which does not require installation

Hello,
My application is written in Flash and I'm looking for a compact web-server for Mac OS 10.5+, which would be able to run it from a CD without any installation to user's computer.
Does anyone know a solution?
Free software is preferred. Crossplatform: Macintosh + Windows would be the best.
Thank you.
Best regards,
Vadim Lazuko

I haven't found how Mongrel could be run without installation on target computer.
Could you, please, point me the solution for that?

Similar Messages

How do i delploy on hosted server which does not support crystal. Is RAS ?

have to put a solution on a public hosted server. it does not support crystal . cannot add to GAC
if i use RAS(or cr 2008 server) on another server . Web app works on public server but points to my RAS server. Do I still need components on the public server. if I do this will not work,
any ideas
John

many thanks. there is some tendancy to cloud hosts. all you get is ftp access and .net ompersonation.
just drop the webisite in. so no MSI use which also rules out merged modules
thanks
john

HP Photosmart 7520 e-All-in-One Embedded Web Server (EWS) Does Not Respond

My new (as of 3/14/2014) 7520 is connected (wirelessly) to an all-Apple wireless network. with four computers (and, at times, two iPhones) sharing that network.
While I can print to the 7520 and also scan from it, I cannot access the 7520's Embedded Web Server, no matter what I try.
I have located the 7520's IP address on its display and entered it into the Safari web browser's address field as 192.168.1.7 (with the usual http colon slash slash prefix, of course). When I hit return, the browser's progress bar appears and then stalls. After 30 seconds, the progress bar disappears and nothing else happens.
While trying to find what might be causing this problem, I have also…
• disabled the network's (and my computers') firewalls,
• used the 7520's Bonjour address,
• tried both addresses using Safari on …
- a MacBook running OSX 10.6 (Snow Leopard),
- a MacBook Pro running OSX 10.7 (Lion),
- a MacBook Pro running OSX 10.8 (Mountain Lion),
- a Mac mini running OSX 10.9 (Mavericks), and
- an iPhone 4 running iOS 7.1
- an iPhone 5 running iOS 7.1
• made sure I was using the latest version of the printer driver software and HP Utility, and
• used the HP Utility to attempt to access EWS,
…all without success -- that is, on the laptops, nothing is displayed. On the iPhones, Safari reports that it "could not open the page because the server stopped responding."
Furthermore, although I can turn on and connect to the 7520's Direct Wireless wi-fi channel with my laptops and iPhones, typing the address for the EWS (specified in the printed Network report as http://192/168.223.1) in the browser and pressing Enter again yields the same result.
I had all these problems with a 7520 I bought from a local computer store. I contacted HP Tech support by chat, spent 4 hours walking through resets and other tests with them, and they decided to send me a new 7520. I have sent back the first 7520, installed the new one, and the problems persist with the replacement 7520!
What do you think might be wrong here? Do you have any advise or trouble-shooting guidance?

Okay… I did as you advised — as best as I could, that is… the link you posted yielded a page marked "HP was unable to find the page you wanted."
In any case, I changed the DHCP range to 192.168.1.100 thru 150.
Using the following procedure, I believe I set the 7520 to the static address 192.168.1.10 (using the 7520's control panel, from the home screen)…
• Tapped the radio (wireless) icon, second from the left on the top bar of the screen.
• Tapped "Settings" button, lower-left screen.
• Tapped "Advanced Settings" bar (second fom bottom).
• Tapped "IP Address" bar (at top).
• Entered "192.168.001.010" in the IP address field.
• Pressed the home button icon to the upper left of the display.
• Tapped the wireless icon in the top bar again and confirmed that the IP address had been changed to … .10
With that done, I tried
http://192.168.1.10/
in the browser of a couple of my computers (OS X Lion MacBook Pro, OS X Mountain Lion MacBook Pro).
Still no joy.
In case you don't alread know, Airport base stations can be set to reserve specific IP addresses for static IP devices or services. I reserve an IP address for testing database and OS X servers on my network (for clients). You can reserve as many such IP addresses as you like in the "Network" tab of a base station (using Airport Utility) as shown here…
Based on your advice, I have reserved the … .10 address, as you can see. Hope this is useful to you.

One swf plays on web server, another does not

I have a little .swf file (created from video via
the Flash encoder) here: www.arveson.com/expt/flash/page1.htm and
it does not play on the remote server, but it plays locally. I have
placed an Adobe sample Flash file in the same location, called by
page2.htm. It plays fine. Why can't my file play? You can check the
source code in the URL.

You need another software to decompile. I use Sothink SWF
Decompiler (
http://www.sothink.com )
Be careful if you want to decompile, though. This is a very
debated practice among developers. Many people think that to do
this is to steal someones intellectual capital (IE all of the time
and effort they put into programming the swf). I believe that
communities can only move forward by being open about their
methods. I gladly give anyone who asks a copy of any source code I
develop that they want to learn from, and I gladly decompile swfs
to help people solve their problems. I typically ask permission if
I am decompiling to figure out how they did something for my own
benefit.
@Lucho16, I am not sure exactly what your problem may be from
your description. Perhaps with a link, or some source code, I could
discern more information.

I would like to delete my credit card number because there are charges on there i didnt make called the phone number for help that was on my account and couldnt speek to a person told me to go to web site which does not help me

i would like to delete my credit card acct charges are made that i didnt authorize

DavidBenJeshuah wrote:
apple wont give me a new phone cause I broke the screen and I replaced it my self.
Correct. When you did that, you voided all warranty/support, & forfeited the right to an out of warranty replacement.
There was nothing wrong with the screen I bought,
And, exactly, how do you know that? Since Apple DOES NOT sell iPhone parts, there is no official source for genuine parts. Thus, many on the market are counterfeit & produce nothing but problems.
Good luck.

Can universe connect to restful web service which is not soap based

Can universe connect to restful webservice? I know it is allowed to connect to SOAP webservice. Currently is using WSDL1.1.
How about restful web service which does not have any wsdl file?

Hi,
there is a chapter - Security Configuration at Message Level
in XI config guide which specifies everything you need - this is what you need
so I hope no further explanations are necessary
Regards,
Michal Krawczyk

C# error when connecting to ldap server that does not exist

When using Novell.Directory.Ldap.dll and making a connect to an ldap
server which does not exists i'm getting the following error:
Connection.freeWriteSemaphore(-2): semaphore not owned by any thread
Im using this to connect: conn.Connect(ldapHost, ldapPort);
This error is not catched by LdapException. Can anyone tell me if this is
a bug or do I have to do something different.

Hi. I'm using version 2.1.11 of the NDK for CSharp. I'm getting this
same error message:
Code:
Connection.freeWriteSemaphore(-2): semaphore not owned by any thread
at Novell.Directory.Ldap.Connection.freeWriteSemaphor e(Int32 msgId)
at Novell.Directory.Ldap.Connection.connect(String host, Int32 port, Int32 semaphoreId)
at Novell.Directory.Ldap.LdapConnection.Connect(Strin g host, Int32 port)
at TestLDAP.Program.Main(String[] args) in D:\Documents and Settings\tjbuege\my documents\visual studio 2010\Projects\TestLDAP\TestLDAP\Program.cs:line 20
This occurs when I try to bind to a server that does not exist. Here
is my sample source code that generates that error:
Code:
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using Novell.Directory.Ldap;
namespace TestLDAP
class Program
static void Main(string[] args)
LdapConnection conn = null;
string host = "server.does.not.exist.com";
int port = 389;
try
conn = new LdapConnection();
conn.Connect(host, port);
catch (Exception ex)
Console.WriteLine(ex.Message);
Console.WriteLine(ex.StackTrace);
if (conn != null)
conn.Disconnect();
Is there a fix for this? It makes this library useless for me.
Thanks,
Tim
tjbuege
tjbuege's Profile: http://forums.novell.com/member.php?userid=108957
View this thread: http://forums.novell.com/showthread.php?t=365082

I have CD version of Adobe Photoshop Element 9. I have CD version of Adobe Photoshop Element 9. I have purchased the new Macbook which does not have DVD drive. Can I download this software over the web and install using the Serial Number I have. Thanks,

I have CD version of Adobe Photoshop Element 9. I have CD version of Adobe Photoshop Element 9. I have purchased the new Macbook which does not have DVD drive. Can I download this software over the web and install using the Serial Number I have. Thanks,@

yes,
Downloads available:
Suites and Programs: CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Are there any apps which will allow local calling using data only that do not require any special numbers called out initially and does not require the receiver to have a similar app or account?

Are there any apps which will allow local calling using data only (not minutes, no extra charge) that do not require any special numbers called out initially and does not require the receiver to have a similar app or account? Just for random local calling.

Yup.
Here is a way you could solve this by adding an extra column and a small lookup table:
The lookup table is here for the copying:
0
1
k
kilo
2
M
mega
3
G
giga
4
T
tera
5
P
peta
6
E
exa
7
Z
zetta
8
Y
yotta
In table 8 (the one on the left in the image) column A is where the values are.
B1=A1÷(1024^VLOOKUP(INT(LOG(A1, 1024)), Binary Prefixes::A:D, 1))&" "&VLOOKUP(INT(LOG(A1, 1024)), Binary Prefixes::A:D, 2)&"B"
this is shorthand for... select cell B1, then type (or copy and paste from here) the formula:
=A1÷(1024^VLOOKUP(INT(LOG(A1, 1024)), Binary Prefixes::A:D, 1))&" "&VLOOKUP(INT(LOG(A1, 1024)), Binary Prefixes::A:D, 2)&"B"
select cell B1, copy,
now select all the cells in column B, paste

I have a web site built by Yahoo Web Site Builder which does not have a Mac version, is there any compatability between Iweb and the old Yahoo program?

I have a web site built by Yahoo Web Site Builder which does not have a Mac version, is there any compatability between Iweb and the old Yahoo program? If not how do I clear off the old site so as to re publish with Iweb.

iWeb cannot import published files so you would need rebuild the site.
Yahoo hosting is notoriously poor and their tech support is awful. I would suggest you look for new hosting and start afresh. Some pointers for choosing hosting...
http://www.iwebformusicians.com/iWeb/Website-Hosting.html
If you do choose to go this route, transfer your domain name registration away from Yahoo to your new host.

OLE DB provider "Microsoft.ACE.OLEDB.15.0" for linked server "(null)" does not support the required transaction interface

Hi All,
I am trying to execute a stored procedure and store its result in an excel.
My query to execute stored proc and store sresults in excel
INSERT INTO
openrowset('Microsoft.ACE.OLEDB.15.0',
'Excel 8.0;Database=C:\TC\DataAnalysisFiles\DataAnalysisResult.xls;OLE DB Services=-4','select * from [Sheet1$]')
EXEC UspUnitTest_Test_CheckDuplicateModelNumberSerialNumber
I am getting error
The requested operation could not be performed because OLE DB provider "Microsoft.ACE.OLEDB.15.0" for linked server "(null)" does not support the required transaction interface.
I have enabled below things by running scripts
sp_configure 'show advanced options', 1;
GO
RECONFIGURE;
GO
sp_configure 'Ad Hoc Distributed Queries', 1;
GO
RECONFIGURE;
GO
EXEC master.dbo.sp_MSset_oledb_prop N'Microsoft.ACE.OLEDB.15.0', N'AllowInProcess', 1
GO
EXEC master.dbo.sp_MSset_oledb_prop N'Microsoft.ACE.OLEDB.15.0', N'DynamicParameters', 1
GO
Please help and let me know if this can be resolved
Supriya Thigale

because OLE DB provider "Microsoft.ACE.OLEDB.15.0" for linked server "(null)" does not support the
required transaction interface.
Hello,
When you insert data from SQL Server into a linked server, then a distributed transaction should be started and here it seems this fails.
See
Distributed Transactions (Database Engine) for more Details +
Distributed Queries
Olaf Helper
[ Blog] [ Xing] [ MVP]

Web server connectors did not install

Newbie. I am trying to install the developer edition of
Coldfusion on my Intel-based MacBook Pro. In the set-up wizard I
click ‘Developer Edition’, ‘Server
Configuration’ and ‘Built-in webserver’.
This is the error message I have been getting:
“You have successfully completed the first step in
installing Macromedia Coldfusion MX7”
However, the ColdFusion service does not appear to be
running, the web server connectors did not install successfully,
and the web server and/or website could not bve reached on port 80.
Possible reasons include the ColdFusion service failing to start,
blocked 2920 or 51011 ports, or the web server and/or website is
not running or is not configured to listen on port 80 (in which
case this is not an error).
Please complete the following steps to complete the
installation:
1) Consult the Installation Guide on how to manually
configure the web server connecttor,
2) Ensure any firewall software blocking ports 2920 or 51011
is disabled,
3) Ensure the ColdFusion service is started,
4) Manually configure your web server connectors,
5) Confirm you web server and websites are started, and
6) Continure your installatino by logging in to the
Configuration wizard at
http://localhost:8500/CFIDE/administrator/index.cfm”
I cannot find an Installation Guide. Have switched off the
firewall in the ‘Sharing’ folder in the System
Preferences. Don’t know how I would manually configure web
server connectors and can find nothing in the Macromedia support
website.
What can I do? I am very keen to learn and use Coldfusion.
Any help greatly apprecitated.

You should be able to find what you're looking for here:
http://livedocs.macromedia.com/coldfusion/7/htmldocs/wwhelp/wwhimpl/js/html/wwhelp.htm

Setup.exe gives a "LANG_LIST has some locales which does not match with the locale of serial number"

I ran the Adobe Customization Wizard XI to create a transform file and now when run setup.exe it always come with the error "LANG_LIST has some locales which does not match with the locale of serial number".
It does the same thing when using msi with the command : msiexec /i AcroPro.msi TRANSFORMS=AcroPro.mst /qb!
Here is my setup.ini file
[Startup]
RequireOS=Windows XP
RequireMSI=3.1
RequireIE=7.0.0000.0
Require64BitVC10RT=1
CmdLine=/spb /rs /sl"1036"
[Product]
msi=AcroPro.msi
vcrtMsi=vc_red.msi
vcrtDir=VC10RT_x64
Languages=1033;1036
2052=Chinese Simplified
1028=Chinese Traditional
1029=Czech
1030=Danish
1043=Dutch (Netherlands)
1033=English (United States)
1035=Finnish
1036=French (France)
1031=German (Germany)
1038=Hungarian
1040=Italian (Italy)
1041=Japanese
1042=Korean
1044=Norwegian (Bokmal)
1045=Polish
1046=Portuguese (Brazil)
1049=Russian
1051=Slovak
1060=Slovenian
1034=Spanish (Traditional Sort)
1053=Swedish
1055=Turkish
1058=Ukrainian
1025=English with Arabic support
1037=English with Hebrew support
6156=French (Morocco)
CmdLine=TRANSFORMS="AcroPro.mst"
[Windows XP]
PlatformID=2
MajorVersion=5
MinorVersion=1
ServicePackMajor=3
[MSI Updater]
Path=WindowsInstaller-KB893803-v2-x86.exe
I don't know what goes wrong as took my serial number on my profile from the adobe web site, same thing for the download of the software.
Does it means that the serial number provided was invalid for deploying ?
NB.: My goal is to deploy our Acrobat XI through SCCM in silent mode and I don't know if there is extra consideration for that. For now it's only not working at the command line.
Another important point is that the install works great without customization ! If I just run the setup.exe from freshly extracted files and I use my serial number, everything is working fine.
So what goes wrong ?

Thanks for the reply brogers_1 and Vinod Dbhal, you gave good hint.
I retried installing the initial package in French on a Windows 7 English and the software installed properly in French.
As I used to work with virtuals for those tests, I rolled back my virtual and redo my test installation with chosing to install it in English on my Windows 7 English and again the installation finished properly but I was surprised when I realized that even if I chose English as language, the software was running in French !
Of course I can change the language settings (in the edit-preferences-language) to follow the operating system witch is nice.
That gave me the cue I needed to know. I started from scratch my customization with choosing only the French language in the "Application Languages" and I left the MUI Languages blank and saved the .mst
I ran again the same command : msiexec /i AcroPro.msi TRANSFORMS=AcroPro.mst /qb!
And everything works fine.
NB.: As I used the .msi directly, of course I had to install the prerequirement Visual C++ 2010 first. Otherwise the installation failed without any error message.
Thanks again to you for your good hint,
Bob

Input field in Web Dynpro ALV does not have correct focus

Hello Friends,
Our client's SAP system is recently upgraded with ECC 6.0 SP 18.
After that the focus in the editable field of Web Dynpro ALV does not working properly by down arrow navigation.
The common scenario:
The ALV has more than one rows and one column is editable...
when user is selecting field of first row and making some entries...
after that pressing down arrow it is going to next row and coloring the field like focusing...
but the 'cursor' is not blinking so user can not make entry without clicking by mouse...
this was working Ok before upgrade...
Could you please anyone have a look and propose a suitable solution?
Thanks
Krish

Hello,
The problem was with Javascript....which play an important role in layout of web dynpro ALV...
which resides in MIME repository -> SAP ->PUBLIC - >BC ->NW5 ->JS ->SAPURI_Ie6....
We wrote to SAP for giving us the fix...
after we got a new file from SAP the problem is solved...
also we have to clear server cache through SMICM and client cache...
Thanks.
K.

TS3212 When I try to download iTune, it shows Drive K which does not exist in my computer. It does not allow me to change to other Drive and terminate download stating ' out of disk capacity"

Whne I download iTune, it shows that it will be downloaded to Drive K which does not exist in my computer. It does not allow me to change to other Drives has enough capacity. Then I click change bottom, attempting to change drive, it terminates the download.
Do you have any solutions??

Try "Invalid drive X:\" install errors. You should still be able to chose the drive for the download when downloading the installer with a web browser. The iTunes application is installed on the active system drive, usually drive C:.
tt2

Compact web-server which does not require installation

Similar Messages

Maybe you are looking for