Compal FL90 Sound/Firewire problems.

Hi,
I just received a Compal FL90 laptop and installed Arch X86_64 but have problems with the sound system and firewire connection.
The sound chip is an ALC268 and OSS apps (mixer etc) do not work (aumix for example shows no controls at all) even though ALSA apps (gnome-alsamixer) show a few controls (headphone, mic, capture etc). More important for me, some ham radio apps that I have written and which use the OSS API do not work either. I have already tried to migrate to ALSA before ordering the laptop but failed because of lack of documentation. This is a very nasty situation for me since the OSS compatibility layer in ALSA seems stagnant and as OSS heads for deprecation I expect I will end up in the cold... Any advice on how to solve this problem please?
The problem with the firewire connection is that it does not supply bus power and so I cannot use my firewire zoom/autofocus camera with the laptop (it has no power socket). Any suggestions for a possible firewire card that can supply bus power somehow please?
My thanks in advance.

tsenart wrote:
Hey.
I also own a Compal FL90. After some struggle to get the sound working, I came to a solution.
1st step: Make sure you have the latest ALSA (alsa-lib and alsa-utils) installed on your system and have alsa on the DAEMONS() on /etc/rc.conf array. Type the following (requires root):
[root@testbox ~]# alsaconf
2nd step: Add your username to the audio group. You can do this with the following command (requires root):
[root@testbox ~]# gpasswd -a 'username' audio
3rd step: You have to do that modprobe thing. You can do it with the following command (requires root):
[root@testbox ~]# echo 'options snd-hda-intel model=toshiba' >> /etc/modprobe.conf
4th step: Reboot, unmute PCM, Headphones and Front (if not visible, go to your mixer preferences and checkbox it).
It should work now.
Indeed, this is how I do it as well. I use alsa .16 though.

Similar Messages

  • Odd network (and Firewire) problems cured by unplugging iMac

    I experienced a weird problem with my May 2005 20" iMac G5 running 10.4.2. In October I suddenly lost the ability to connect with one of my computers but not the other. I could connect just fine to the G4 Powerbook running 10.4.3, but could no longer connect to my G4 tower running 10.2.8. The iMac would spend several minutes trying to connect and then the message I got was that the server did not exist or something similar, or sometimes it would say that the version of AFP on the G4 tower was incompatible (I hadn't changed anything). I could still connect from the Powerbook to the G4 tower without any problem so I knew that the tower was OK, and all of the computers were able to print normally through the laser printer on the network. My workaround was to transfer data between the iMac and the tower by going through the Powerbook, but this was a pain since it took twice as long.
    Of course I tried rebooting the iMac a number of times, but this did not help. I was thinking it was a software corruption of some sort, and was thinking of wiping the hard drive and reinstalling the whole system (fortunately I hadn't gotten around to doing that yet).
    This problem persisted for about 2 months until I also realized that my Firewire ports weren't working either when I tried to hook up a new external Firewire drive. The Firewire ports did not even appear under system profiling. I had a very hard time locating info about troubleshooting the Firewire ports, but finally came across the suggestion to unplug everything from the computer, unplug the iMac from the power and leave it off for a while.
    This unplugging cured the Firewire problem and also cured the networking problem!
    (I don't know why this worked. I keep the iMac plugged into a UPS to protect it against power outages if that makes any difference.)
    (The network configuration: iMac and Powerbook connect to Airport Express via Airport extreme, and the Airport Express is connected to the G4 "Digital Audio" tower through an 8-port Ethernet switch (which also connects to laser printer, a PC, and another very old Mac.))

    Chime,
    Good news for you. Actually, it's an emphatic YES!
    Every ISP I've ever used had fine print explaining that multiple computers require multiple accounts. The interpretation of this is: Every computer you want to have assigned a PUBLIC IP address from your ISP requires it's own account. If you try to get clarification, your ISP will argue it, they want you to pay them more money for unnecessary accounts!
    You only need one PUBLIC IP address from the ISP in order to establish internet sharing throughout your house. Your gateway will establish PRIVATE IP addresses for the computers on your home network.
    Plug the phone cord into your Base Station (if it has a dial-up modem), the base station then becomes the one PUBLIC computer allowed on your ISP. Configure it to dial out on demand. It becomes the gateway between the internet connection and your internal network.
    This is completly legitamate as long as you are sharing over an "in-your-own-home-for-personal-use-only" PRIVATE IP LAN behind your ONE gateway connection.
    Not familiar with the new Base Stations, all the older ones had modems. The base station with a modem IS the most convenient way to do this (esp. for dial-up) and provides the best firewall security for the whole network. However, if yours doesn't have a modem, it's still possible to establish internet sharing using one of your computers as the gateway to dial-out and share the connection.
    BTW - if BB options are limited, have you considered satellite options (DirecPC, etc.)?
    Mark

  • 10.4.7 update  and external firewire problems with HD corrupion

    Dear all,
    Advised by Jpfresno I started this new topic about Tiger 10.4.7 update.
    I will repeat my post and what was happening 2 weeks ago:
    “In 5 years 10.4.7 update was a tragedy for my Powerbook Ti 667. When I update from 10.4.6 to 10.4.7 my 300 GB firewire drive gets corrupted, after repairing it with DiskWarrior and after connecting it to my PowerBook my computer freezes and I must shut it down via powerbutton. Safari also crashes after the update.
    I just erase my Hard Drive and after that install 10.4 and update with combo to 10.4.7. But I had the same problems: finder freezes with connected firewire devices and also safari when browsing. I spend a week trying to solve the problem but no luck.
    Yesterday and with no firewire devices, 10.4.7 freeze and I have big trouble in order to started my powerbook!!! Even when i insert the 10.4 install DVD it did not detected my HD. Finally I get it to work and install 10.4 and combo update to 10.4.6 and everything works. My external firewire drive and safari. I already diagnose my HD with disk utility, TechTool and directories with Diskwarrior and everything is ok.
    I clone my 10.4.6 to firewire, boot from it and everything is working. I let my external drive connected and finder does not freeze.
    My conclusion is that the problem is 10.4.7 update. It only give me problems and I was getting crazy with it. 10.4.6 is working good and I do not advice anyone to update to 10.4.7.”
    Last week after reinstalling 10.4.6 I started to have HD problems with my Powerbook 667. I did a surface scan with TechTool I it reported bad sector. Then I done a zero disk format but after a second surface scan TechTool also reported bad sector. Then I take the decision to replace my internal HD. I bought a Samsung 40GB Hard Drive and installed it on my PowerBook. Then I have done a clean installation of 10.4.6 with all applications that I need and clone it to my hard drive with Intego Personal Backup software. Everything works on 10.4.6. and external firewire drive.
    After that everything is ok. But I decided to test if my problem derivates from 10.4.7 update or from previous HD corruption. Then I install 10.4.7 update on my Internal Hard Drive. Everything is working good but after connecting my external Hard Drive the finder started to freeze!!!!!!!!!. After that I tried cloning HD to external firewire with Intego personal Backup. Everything was working good but when it was finishing the backup process started to give errors!! I started panic. I interrupted the backup process but after and after restart I found something strange with 10.4.7. The system started up, I login but I could not started any application!!!??? All my application died!
    Then I have done one more clean installation of tiger and 10.4.6 update.
    My conclusions are that the 10.4.7 update causes all the problems that I have on my PowerBook, because I used the same methods and same software/hardware on 10.4.6 and did no have any problem.
    This last two weeks were very difficult to me. I tough that these problems do not happen with Apple computers but I was wrong!!! It is very hard to me to deal with it. I always said to my friends that I never had problems with Apple computers. I accept that a hard drive died because the use of it but I can not accept that a system update cause me 2 weeks of hard problems and make me loose precious work information! I always love apple computers and Apple OS but now I am disappointed
    If anyone can explain what happen or have a solution for those problems?
    Thanks for the comprehension and collaboration.
    Best Regards
      Mac OS X (10.4.6)  

    Hi, alsvieira.
    There are some things you did not check in all of your troubleshooting:
    1. Run the Apple Hardware Test (AHT) that came the affected computer. See my "Apple Hardware Test" FAQ for comprehensive advice on using the AHT in troubleshooting.
    2. re: FireWire troubleshooting: Here is some general troubleshooting advice that may help if problems return with your FireWire drive:1. Review the AppleCare Knowledge Base document "What to do if your computer won't recognize a FireWire device".
    2. If this problem occurred after installing a recent Mac OS X Update, and you are also unable to mount CDs, DVDs, or disk images perform the steps in this Mac OS X Hints article. This worked under Panther and may also work in certain situations under Tiger.
    3. Power-on the FireWire drive before starting up (booting) your Mac.
    4. Reset PRAM and NVRAM.
    5. Resett the power-management chip in your Mac.
    6. Try a different FireWire port. James Wiebe, CEO of WiebeTech, has published FireWire Port Failures in Host Computers and Peripheral Devices, a white paper providing backgroud information and technical analysis concerning the causes of failure for FireWire ports. This may provide additional diagnostic information.
    7. Micromat TechTool Pro version 4 can test the FireWire bus in your computer: this tests the bus — not the ports — but if the problem is on the FireWire bus on the logic board, it should reveal it.
    8. Check with the manufacturer of your FireWire drive or enclosure to see if any firware updates are available for such.
    9. Hopefully, the partition map on the FireWire drive is not damaged. This can happen if the FireWire drive was not Ejected before being disconnected or powered off. If it still refuses to mount, you may need to employ data recovery tools or services: see my "Data Recovery" FAQ.Note that some of the information above is from the "FireWire Problems" chapter of my book, Troubleshooting Mac® OS X.
    Dr. Smoke
    Author: Troubleshooting Mac® OS X
    Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • IMac firewire problems - anyone just replace them?

    hi. i know there have been a lot of problems and a lot of posts with the FireWire busses on the aluminum iMacs. I know no Apple solution has been released. But i'm wondering if anybody has had their FW busses on their iMac replaced with a bus using a different chipset than the Agrere(sp?) set. is this possible even? if this ridiculously complicated?

    Since the Firewire is soldered onto the logicboard, you'd need an entirely different logicboard design. Unless Apple has used other chipsets, which is unknown, I don't think that's possible. It is more likely one of the issues outlined here needs to be addressed if you are having Firewire problems*:
    http://www.macmaps.com/firewirebug2.html
    - * Links to my pages may give me compensation.

  • HT4085 Some videos that are taken with my iphone's camera are not making sounds, this problem occured today to all videos i record, please help

    Some videos that are taken with my iphone's camera are not making sounds, this problem occured today to all videos i recorded starting from today, please help

    It also takes time for the photos to be transferred out of your iPhone and into Photo stream on Apple's iCloud servers.
    Note that this can't happen if your iPhone is not connected to a WiFi network:
    When you enable My Photo Stream on your devices, all new photos you take or import to those devices will be automatically added to your photo stream.
    iOS devices: New photos you take are automatically uploaded to your photo stream when you leave the Camera app and are connected to Wi-Fi. My Photo Stream does not push photos over cellular connections.
    Macs: Any new photos you import to iPhoto or Aperture begin uploading automatically when you have a Wi-Fi or Ethernet connection. Or you can change your iPhoto or Aperture preferences so that only photos you manually add to My Photo Stream are uploaded.
    PC with iCloud Control Panel 2.0 or later: Open a Windows Explorer window and under Favorites select iCloud Photos if you are using iCloud Control Panel 3.0 (or Photo Stream if you are using 2.0 to 2.1.2). Open My Photo Stream. Click the "Add photos" button. Select the photos to import to My Photo Stream, then click Open.
    from here: http://support.apple.com/kb/ht4106

  • Ipod update freeze, firewire problem, possible fix for many.

    Hello all,
    I've been having a problem with my ipod 3rd gen updating in much the same way as many in this forum have throughout a number of topic threads.
    PROBLEM:
    During song/playlist/content (not software update or restore) updating function one of two things would happen:
    - update would freeze at some point of the transfer (5, 74, 687 songs in to the update) and I would have to force quite itunes and, not being able to dismount the ipod through recommended procedure, I would physically dismount the ipod and receive a scolding for improper dismounting of device.
    - system would crash at some point of the transfer yielding the shaded screen and a prompt to restart the computer by depressing the front panel button for two seconds.
    In each of the above cases, no matter how many songs that itunes thought it had transferred, I would only have about a dozen songs on the ipod itself, perhaps indicating a bottleneck on the G4 end of the transfer.
    DEADENDS FOR ME THAT MAY STILL SOLVE PROBLEM FOR SOME:
    - swaping out cables
    - ipod software restore or restore to earlier version
    SOLUTION:
    After contacting Apple support, I was led to the opinion that the problem was with the firewire port itself. This was confirmed by attaching my ipod with my cable to a roomates G5 resulting in a faultless transfer of his song library. I was ready to go out and purchase a new firewire PCI card but decided to research firewire problems in the G4 folder of Discussions. This is where I found the fix to my problem (see links at bottom of document). It would seem that Mac ports, both firewire and USB, have a tendency to bog down after awhile and need to be reset. This can be a addressed by one of three possible solutions. The first and easiest was the solution that worked for me (for other solutions please follow links at bottom of page):
    - powered down and disconnected all firewire and USB cables from the G4
    - disconnected power cable from G4 (for laptops I would guess that the battery would need to be removed, not sure if that causes any other problems though, please research)and let sit for about 30 minutes.
    - reconnected all cables and restarted computer. Ports should be reset at that point
    - I took the added measure to restart my computer once with nothing attached to USB and firewire ports and then powering down with front panel button before connecting cables and proceding with final restart.
    RESULT:
    Faultless transfer of 37.6 gigs of content in less that 45 minutes.
    LINKS:
    http://discussions.info.apple.com/webx?128@@.68bb1cb3
    Dale Weisshaar, "Security Update killed my firewire ports" #1, 08:28pm Sep 27, 2005 CDT
    Good Luck
    GKE

    This worked perfectly for me!!!
    SOMEBODY PLEASE TAG THIS POST!!!
    i have had the problem that everyone has posted about (i.e. - updated iTunes/iPod software and had the update/freeze problem, tried all solutions, to no avail, and was pretty much screwed.)
    JUST DO EXACTLY WHAT HE SAYS TO DO (powermac g5, by the way):
    1) power down the computer
    2) unplug EVERYTHING (usb, firewire, power, monitor, etc.)
    3) leave unplugged for 30 minutes
    4) plug power back in
    5) power up from main power button
    6) wait for computer to start back up, then shut down from power button
    7) plug everything back in and power up
    8) restart once more for good measure
    9) update your ipod
    10) take a sigh of relief!
    you are seriously a godsend...only one thing...I BOUGHT A NEW ONE ALREADY!!! i literally bought it the day that you posted this solution. After a month and a half of trying to fix this problem, i finally gave up and bought a 20GB iPod Photo with applecare...cost me about $380.
    no matter, i think i'm gonna sell my "older" ipod to my mom or dad. they'll use it doing whatever they do. plus, that way, if there's any problem, i can fix it for them without feeling bad about screwing over some stranger.
    thanks again, this solution worked perfectly.

  • Firewire problem since upgraded to 10.4.3

    Hi there,
    since I have upgraded my iMac G5 to 10.4.3, it is no longer recognising my external Lacie firewire drives. These work fine as I have tried them on a machine running 10.4.1, and they worked fine on the iMac G5 before I upgraded to 10.4.3
    The iMac powers the devices but they do not mount or show up in disk utility or apple system profiler...
    any ideas?

    Robert,
    Take a look at this thread:
    http://discussions.apple.com/thread.jspa?threadID=260074
    Also, which update method did you use when you went to 10.4.3? Did you use Software Update or did you download the update from Apple's website? Some users have reported a resolution of Firewire problems by downloading and installing the 10.4.3 Combo Updater from Apple. You can do this even thought you are already at 10.4.3.
    Regards,
    Steve M.

  • Sound device problem in ZONE

    I created a solaris zone for my desktop use, but the sound device was not avaialbe. I tried to export it from the global zone:
    device
    match: /dev/sound/*
    then rebooted the zone, login it, found there were several files added in /dev:
    lrwxrwxrwx   1 root     root           7 Sep 17 14:50 /dev/audio -> sound/0
    lrwxrwxrwx   1 root     root          10 Sep 17 14:50 /dev/audioctl -> sound/0ctl
    crw-------   1 root     root      34,  0 Sep 17 14:50 /dev/sound/0
    crw-------   1 root     root      34,  1 Sep 17 14:50 /dev/sound/0ctlThe problem is: how to change the /dev/sound/* files for all users to read and write, permanently?
    I tried the following methods but failed:
    1. Change manually these files' mode to a+rw as root. But once I logged out the zone or rebooted the zone, the changes were lost.
    2. Create a script in /etc/init.d/ and link it to /etc/rc3.d/ to let it auto execcute when boot, as below:
    #!/sbin/sh
    /usr/bin/chmod a+rw /dev/sound/*
    echo `date '+%D %H:%M:%S' > /var/tmp/enable.audio.log
    ls -le /dev/sound/* >> /var/tmp/enable.audio.logthe content of /var/tmp/enable.audio.log is something like:
    crw-rw-rw-   1 root     root      34,  0  9月 17 14:50:30 2005 /dev/sound/0
    crw-rw-rw-   1 root     root      34,  1  9月 17 14:50:30 2005 /dev/sound/0ctlBut oddly, the permissions of these files would always be changed back to the original state soon, automatically.
    3. I added an entry in /var/spool/cron/crontabs/root to change the permissions every 10 mins, and it did work, strangely. However I think it's not a good method, because I have to wait for 10 minutes before I can login it (if I login the zone before the permissions were changed, the sound device will never work)
    Thanks in advance.

    It's probably /etc/logindevperm that's fighting you. Read the comments in that file, then you can modify /dev/sound in it.
    The idea is that only the user logged in on the console would normally have access to the audio device and the frame buffer, so the permissions are reset at login.
    If you're having folks login through a separate zone, this changes that assumption.
    Darren

  • Lacie Speakers and Mac Pro Firewire problem waking from sleep and loud feed

    Lacie Speakers and Mac Pro Firewire problem waking from sleep and loud feedback. I had a powermac before this with the speakers and it worked fine. But the mac pro is having these issues. Is it the firewire port or the speakers or (and most likely) just a firmware glitch with mac pro? Anyone else see these issues?

    http://web.mac.com/jerimydulay/Site/MyAlbums/Pages/Lacie_FirewireMIDI.html
    Here is my audio settings. For some reason I wish I could remember what I did. It was actually the Apple Store tech in the Unversity Village in Seattle that gave me the idea and I swear I had to change the settings in MIDI setup. Now that Leopard is out it seems the MIDI stuff has been redone. I included screenshots of my MIDI setup as it is currently to see if you see something different on your computers. Let me know!

  • Sound & Bluetooth problems for lenovo G 560

        Sound & Bluetooth problems for lenovo G 560-
    Speakers create noise when increase the sound or change window.
    Bluetooth icon & drivers dissappear after sometime.(Fn + F5 doesn't work)
    They appear again after restart.
    Warranty Status Lookup
    Product ID:        Type-Model:        Serial number:
    59304299        0679-N/A        CBxxxxxxxx
    Location:        Expiration date:        
    India                  2012-08-31        
    Moderator Note; s/n edited for member's own protection

    Hi lenovoG60,
    Welcome to Lenovo Community!
    You may want to try updating all of your machine drivers such as
    Lenovo Energy Management (power management)
    Bluetooth drivers
    Sound card drivers
    Chipset drivers
    Look for the drivers from our support site.
    Best regards,
    Cleo
    WW Social Media
    T61, T410, x240, Z500, Flex 14
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    How to send a private message? --> Check out this article.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Audigy 2 sound card problems

    I am hoping that someone out there can help me in a crucial situation.
    I am using an Audigy 2 sound card with creative 5. speakers.
    I also use Adobe Audition to edit, record sessions for my voice-over jobs.
    Recently, I attempted to hook up a web cam so that I could see my grand daughter on the west coast.
    After hooking up the web cam, I noticed my home studio environment changed drastically. I began having trouble with recording using my microphone through my Macki mixer. I began hearing a continuous hiss that I had never experienced before.
    In fact after uninstalling the web cam, and restarting my computer, I got that horrible blue screen on my computer indicating the world was about to end! Smile
    Long story short, I was able to finally get my computer back up, but I continue to experience problems recording "clean' audio".
    Three things, after reinstalling Creative from disc several times and restarting my computer I receive a window stating Creative Media Source Detector.....Unable to load needed components....Please reinstall the application"
    Also, when trying to test my sound hardware I get a message stating...Direct play voice setup..."an error occurred during direct play voice setup....error code 0x80004005
    Last but not least I cannot access the "Creative diagnostic feature on my computer. I only get a small window for this feature that will not open up fully and allow me to run a diagnostic test!
    I know this is a lot to absorb, but I cannot get anyone from Creative to address my problems because I am out of warranty and therefore not getting any love from this company.
    Need your advice and or guidance on this.
    Please respond when time allows.
    Vopro

    Re: Audigy 2 sound card problems? use add/remove programs and remove all creative software and drivers, then do the same for your web cam and unplug it
    restart your pc
    download and install [url="http://downloads.guru3d.com/Guru3D---Driver-Sweeper-%28Setup%29-download-655.html" rel="nofollow">driver sweeper[/url] and use it to clean up any left over creative bits and bobs and restart your pc when it asks you to
    now download and install the [url="http://support.creative.com/Products/product_list.aspx?catID=&CatName=Sound+Blaster" rel="nofollow">latest audigy drivers[/url]
    once your back in to windows try recording something and see if everything's back to normal
    now reinstalling your web cam but don't reinstall using the cd that came with it
    find the manufacturer's website and get the latest drivers
    install cd's best avoided simply because the software and drivers they contain are typically the initial release versions, and so potentially very old
    and i think we can all agree that old, buggy drivers can be a real pain

  • Intermittent sound & voice problems

    I have been having Intermittent sound & voice problems
    During the last week when making receiving the voice and sound from the speaker is distorted on both ends of the conversation
    I have to restart the mobile and it works fine for a day or so then starts again
    I reset the phone to factory setting and it seems to have no effect
    Has anyone else had these problems?

    http://www.sonymobile.com/global-en/support/contact-us/
    Update Service (SUS)
    PC Companion (PCC)
    Bridge (for Mac)
    Alternatives on How to backup Xperias
    http://talk.sonymobile.com/thread/36355
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • How I fixed my Toshiba Satellite sound distortion problem

    I've been trying to get the garbled sound recording problem fixed on my Satllite L745-S4210 for months. I have been on this forum and other forums. Alot of people have given me their time trying to fix it, but I managed to do it myself. In the Microphone Properties Advanced Section is a box "enable audio enhancements" I unchecked that box and all my recordings are now crystal clear!

    Satellite L745-S4210
    garbled sound recording   ...   a box "enable audio enhancements" I unchecked that box and all my recordings are now crystal clear!
    Thanks for that contribution.
    The box should be labeled "enable garbled recording."
    -Jerry

  • Fixed my sound crackling problem! Soundblast X-fi Xtrememusic c

    I received my Soundblaster X-fi Xtrememusic card yesterday evening and having sound crackling problem. I could hear this crackling sound whenever I play music CD or play Battlefield 2 and it was annoying,? So I searched Google about this and found a thread on this forum about a bunch of people having this same problem. I just thought I should post my problem/solution to see if this fixes for you guys. The issue with my system was because of my wireless Belkin Pre-N desktop card. Here is how I found out:?. Was having crackling problem so I reinstalled Windows XP w/ SP22. After Windows XP installed, the first driver I installed was for?Soundblaster X-fi card3. Tested the sound by playing music CD. Couldn't detect any crackling sound.4. Installed Belkin?wireless?Pre-n desktop card driver and crackling sound returns. >5. Uninstall Belkin driver and turned off computer6. Put in my old D-Link DWL 520 Wireless card and installed driver for it. So far X-fi seems to like D-Link DWL 520 card!?I tested with D-Link DWL 520 by listening to music and downloading 28mb file off Nvidia and no crackling sound! I hope this help for you guys! I love X-fi now... I was about to return it back to Newegg. ?My system spec:Windows XP w/ SP2AMD 64 X2 4400+ (at stock speed)Asus A8N-SLI Premium MB2GB Corsair memory600 Watts Seasonic power supplyEVGA 7800GT SLI2x 250GB Western Digital HD on?NVRAID0?Message Edited by ktun on 02-28-20060:59 AM

    Same thing here... X-Fi Titanium Fatalty Champion, P5E3 Deluxe (x38)..using Windows XP SP3
    check it out ftp://ftp.int3.ru/X-Fi_Recording_Sample.rar

  • I still have a warranty but it will be out in a week. i previously have a sound distortion problem with my mac for months and suddenly it just fix itself. what should i do? i'm worried that it will comeback and i dont have a warranty anymore.

    i still have a warranty but it will be out in a week. i previously have a sound distortion problem with my mac for months and suddenly it just fix itself. what should i do? i'm worried that it will comeback and i dont have a warranty anymore.

    JoBautista,
    you still have the option (before your warranty expires) of purchasing an AppleCare Protection Plan, which will provide an additional two years of coverage. Once your warranty expires, you will no longer have the option of purchasing AppleCare.

Maybe you are looking for