Companies using labview in India and scope of labview in india

HI
This is hari krishna have 1+years experience in labview application development.
I like to know how many companies using labview in India and jobs scope/future of labview developers.
Regards,
Hari Krishna.k
R&D Engineer.

Hi Hari,
The scope of LabVIEW in India is indeed very bright.
You may find the below link useful:
http://forums.ni.com/t5/LabVIEW-Job-Openings/Scope-of-LabVIEW-job-in-India/td-p/1017671
Regards,
Rohan Sood
Applications Engineer
National Instruments
Regards,
Rohan Sood
Applications Engineer
National Instruments

Similar Messages

List of companies using SAP in US and abroad

I have been trying to find who uses SAP and other ERPs. Where can I find this information.
Can you please point me to sources that have the list of companies using ERP in US and abroad. I searched within SAP, Oracle etc. but could not find the list of companies that have ERP in their organizations. Thank you.

Hi,
I have tried all the below mentioned links but couldn't able to get the required result.
http://www.sap.com/about/analystrelations
http://www.sap.com/uk/index.html
sapcustomerlist.com
Can any one help me to find list of Clients currently implemented SAP in Malaysia.
Thanks in advance.
Regards,
Thiag.

I used to working with Labwindow CVI and i would like to know how can i use the commands "loadpanel" and "Displaypanel " in Labview. Using Invoke Nodes?

I want to make another panel appears and runs, but i don´t want to use a subpanel. So, i would like to use somenthing similar to Loadpanel and Displaypanel, that you can use in Labwindows CVI, but in Labview, is ti possible?I hope your answers, thank you!!!

Hi Bichillo,
I posted an example here.
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=137&HOID=50650000000500000014570100&HTHREAD=000087828&UCATEGORY_0=_49_%24_6_&UCATEGORY_S=0
It demonstrates how to do what you are asking.
I do not mind you laughing at the code.
Have fun!
Ben

I have a labview 7 vi and i have labview 6.1

I have a labview 7 vi that get data from excel specified field. I have only labview 6.1 : could someone translate or "save as" these vi in labview 6.1 format ?
Thanks in advance.
Attachments:
Excel_Get_Data_Specified_Field.vi ‏124 KB
Row_Col_To_Range_Format.vi ‏43 KB

vi's converted to version 6.1
Attachments:
Row_Col_To_Range_Format.vi ‏35 KB
Excel_Get_Data_Specified_Field.vi ‏102 KB

I have a non contract iphone4 bought from Apple U.S. store and need to travel to India - how can I use this in India? Can apple unlock it for me so I can put in my own SIM there?

I have a non contract iphone4 that I bought from an Apple Store in the U.S. and now am travelling to India - can apple factory unlock it so I can use it in India with a local SIM card?
Please advise.

WE are not all computer geeks, And the phone companies are trying to run a monopoly.
I think forums like this are great places to inform people who need it.
I have heard horror stories from my family of $85/month iPhone contracts and locked phone.
Let help all of us and discuss how to get unlocked phones and cheaper contracts.
Ok so you say factory unlocked phones are possible in Us. Is that through Apple only?
At&T and verizon dont unlock? Is they any consumer advocacy legislation that would force them? In Uk when they opened to 4 companies (now 6 here) they forced companies to unlock.

Cost of LabVIEW Exam in India and course details.

Hi
I am planning to take the LabVIEW exam, I want to know the cost of exam.
is LabVIEW Basics I and II manual are sufficient for the preparation of the
exam as we have have them in the LabVIEW Academy.
What is difference between LabVIEW Core I , II (mentioned in the syllabous material of CLAD Exam) and LabVIEW basics I and Basics II

Hi illa,
Ray is right, the best way to get pricing and scheduling information is to contact the NI India branch directly.
However, as to your other questions:
LabVIEW Basics is a previous version of the LabVIEW Training Courses. You can check the front of the manuals to see what version of LabVIEW the course materials cover, but I believe it is LabVIEW Version 8.5 or 8.6, which is about 4 versions back.
Because the certification exam tests over the latest version of LabVIEW, 2011 in this case, you will find a few differences- for example, the appearance of variables and boolean constants off the top of my head. You can go online on ni.com and search for "What's new in LabVIEW" and a number of links worth purusing pop up: What's New in LabVIEW 2011? What's New in LabVIEW 2011/features
However, I wouldn't spend too much time on this, as it will probably only impact a few questions.
When we moved from Basics to LabVIEW Core Training, we shuffled topics around for a better user experience. For instance: Event Structures used to be in LabVIEW Intermediate 1, but can now be found in LabVIEW Core 2. You will therefore what to do a topic comparison, as I describe below.
That being said, the LabVIEW Basics 1&2 manuals will still be a great way to familiarize yourself with the LabVIEW Programming environment. I recommend the following plan to prep for the CLAD:
Read through the LabVIEW Basics 1&2 concepts manual to familiarize yourself with the properties of LabVIEW objects and the proper terminology for things. For example, this will teach you that arrays are indexed from 0 and the red dot that sometimes appears on a terminal when you have a type mismatch is called a "Coercion Dot."
Work through the exercises and practice programming so you get used to the LabVIEW Environment and tools.
When you have completed that course compare the LabVIEW Core 1 and LabVIEW Core 2 Course Outlines, which lists the lesson titles, to the lessons in Basics 1&2. This should give you an idea of any topics you may be missing. A search on ni.com or in the LabVIEW Help should be able to fill in any holes. (event structure)
Finally, review the CLAD Preparation Guide's list of Topics and Subtopics to make sure you are familiar with everything you may be tested on.
After you know the material, this Discussion Forum has other posts on preparing for the exam. You can watch the Preparation webcasts and try the 2 Sample exams to get a feel for the type of questions you will be asked. And there are some helpful blogs we have listed.
Good Luck!
Mallori
Mallori M
National Instruments
Global Customer Education Program Mananger
Calculate the time you will save with NI Training

I have been using my Apple ID in India and recently i moved to Spain and now i can not see my indian apps.it says my apple ID is valid for only spanish store.how to download apps from Indian store being in Spain.

I have been using my Apple ID in India and recently i moved to Spain and now i can not see my indian apps.it says my apple ID is valid for only spanish store.how to download apps from Indian store being in Spain.

Did you try to change the location in Settings/iTunes & AppStore/AppleID -> view Apple ID, log in ->Country/Region -> India?

I am trying to integrate simulink model (.mdl) file with SIT of Labview for RCP and HIL purpose. I am using Labview 8.6, Simulink 6.6 with RTW 6.6 and RTW embedded coder 4.6 ,Visual C Express 2008 and Visual C++ Express 2008.

I am trying to integrate simulink model (.mdl) file with SIT of Labview for RCP and HIL purpose. I am using Labview 8.6, Simulink 6.6 with RTW 6.6 and RTW embedded coder 4.6 ,Visual C Express 2008 and Visual C++ Express 2008. I have selected system target file as nidll.tlc,make command as make_rtw and template nidll_vs.tmf. When I try to generate .dll file I get the following error.
Attachments:
SITProblem.JPG ‏101 KB

Hi,
No . I could not solve the issue. Presently we are using microautobox (from Dspace)for doing the RCP.
Himadri

I am using report generation toolkit 1.1 with Labview 7.0 and Office 2003 professional. The create new report VI opens Excel but throws error (-2147167262- from automation open VI) when I try to open MS word. please help...

I am using report generation toolkit 1.1 with Labview 7.0 and Office 2003 professional. The create new report VI opens Excel but throws error (-2147167262- from automation open VI) when I try to open MS word. please help...

Hi Leo22,
Does this error occur if you use any of the example programs that come shipped with LabVIEW? I would try opening one of the examples that write data to Word and see if those give you an error. Also, have you tried just putting down a New Report.VI and change the report type to Word? If this simple vi (that's all you need to open Word) breaks, I would check to see if there are any instances of Word still open. Check the task manager to see if any word processes are still open. There should not be a problem accessing Word 2003 from LabVIEW 7.0. If neither of these solutions work, please give some more detail about your application and we can research further. Thanks!
Jeremy L.
National Instruments
Jeremy L.
National Instruments

Hi All, I am using iphone in UAE and ipad in India usinging same apple id. Earlier I could do imessage to my Ipad with different name but with software update,I am unable to do, as signing id for the iphone and ipad is same.How to restore back

Hi All, I am using iphone in UAE and ipad in India usinging same apple id. Earlier I could do imessage to my Ipad with different name but with software update,I am unable to do, as signing id for the iphone and ipad is same.How to restore back

I believe because you migrated from a Nokia to an iPhone you need to register the Bn phone number with your Apple ID so it can be used for iMessage. The Pn number seems to be the only one registered
Go here > https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
Manage your Apple ID and see if that does the trick
Hope that helps

How do I use LabVIEW to control and vary the voltage on my Agilent Power Supply and simultaneously record temp from 1 DMM and voltage from another DMM?

I am using an Agilent Power Supply to apply a voltage to a
thermistor to heat an Al chassis. I want to use LabVIEW to tell
the power supply to apply 5V for 10 minutes, then step to 7V for 10
minutes, etc. I am completely new to LabVIEW, so any help would be greatly appreciated!
In addition to that, I want to place a type J thermocouple onto the Al
surface and use a Keithley 2000 DMM to monitor the temperature (it has
a built in conversion from V to Temp for type J). I will also be
using another Kelthley 2000 DMM to record the output voltage of a new
uncalibrated thermocouple. I would like to collect the output
voltage for this uncalibrated thermocouple and the temperature reading
from the type J simultaneously. How should I go about doing this
in LabVIEW? I will be using version 6.1. The power supply
and DMMs will be connected to a PC using GPIB.
Again any suggestions would be greatly appreciated- I have no idea
where to begin on such a project. I have taught myself how to
make a basic VI- converting temp in oC to oF, but that is as far
as my knowledge goes.

What you want to do should be fairly straightward and a good way to learn labview.
First off, if you haven't already, I would download the drivers for the Keithley and Agilent instruments. I found the keithley drivers at the link below. You will need to find the labview drivers for the Agilent PS at their website. Drivers are the VI's you will use in your program to control the insturments.
http://sine.ni.com/apps/we/niid_web_display.download_page?p_id_guid=E3B19B3E90B0659CE034080020E74861
If you open Labview and go to the help menu and click on Labview bookshelf there is alot of information on getting you started coding labview. This should get you started, if you have anymore questions just ask in this same thread and I am sure you will get all the help you need.
Brian
Message Edited by BrianPack on 09-14-2005 05:21 PM
Message Edited by BrianPack on 09-14-2005 05:21 PM

I changed companies and had icloud with my old company - now i want to just use my personal id and can't change any icloud info to match my personal ipad id - i can't delete the icloud without the old company id and password which is not available to me

i changed companies and had icloud with my old company - now i want to just use my personal id and can't change any icloud info to match my personal ipad id - i can't delete the icloud without the old company id and password which is not available to me - it probably doesn't even exist anymore!
Because I can't delete the icloud account, I keep getting view terms to accept and it wants to go to the old company account. I can't do anything to get rid of this - when I try to delete the icloud it wants me to delete find my ipad and asks for the old co. id and password - it's a vicious circle and i just want to get rid of it and start fresh with my regular personal email id and password!!! Help!

You will need that old Apple ID and password, which does indeed still exist. Apple doesn't delete Apple IDs, though if this ID was in the control of your company they may have changed the password. If so, you will need your former company to log into the iCloud account using that ID and password and erase the iPad or remove it from iCloud:
http://support.apple.com/kb/TS4515?viewlocale=en_US
Until that's done you cannot change those settings, and if you try to restore the iPad will have it locked with Activation Lock and thereafter be unusable.
Regars.

Not able to create OUT file with "nidll_vxworks" in Matlab for use with the LabVIEW SIT 2010 and a cRio 9073, sh.exe error

I am trying to compile an OUT file for my Simulink model using "nidll_vxworks" and run it using the Simulation Interface Toolkit for a cRIO 9073 . I am able to compile the DLL file using "nidll" and succesfully run the simulation using my PC as the host.
I already downloaded the "gccdist" and "vxworks61gccdist" folders and copied them to "c:" When I build the model in Sumulink I get the following error at the end of the process (at the same time windows tells me that "sh.exe" has stopped working). If it matters I am running Windows 7 64bits, but using Matlab 2009b 32bits and LabView 2010 32 bits. ANY HELP WILL BE APPRECIATED. "QofV" is the name of my Simulink model and I changed to "XXX" parts of the file path.
### Linking ...
rm -f "QofV.out" ctdt.c;nmppc QofV.o QofV_data.o rtGetInf.o rtGetNaN.o rt_logging.o rt_look.o rt_look1d.o rt_nonfinite.o nidll_main.o rt_sim.o ode8.o | tclsh c:/gccdist/WindRiver/vxworks-6.3/host/resource/hutils/tcl/munch.tcl -c ppc > ctdt.c
abnormal program termination
C:\Users\XXX\AppData\Local\Temp\make426012.sh: fork failed: no child processes [1]
make: *** [QofV.out] Error 1
### Real-Time Workshop build procedure for model: 'QofV' aborted due to an error.
>>
### Linking ...rm -f "QofV.out" ctdt.c;nmppc QofV.o QofV_data.o rtGetInf.o rtGetNaN.o rt_logging.o rt_look.o rt_look1d.o rt_nonfinite.o nidll_main.o rt_sim.o ode8.o | tclsh c:/gccdist/WindRiver/vxworks-6.3/host/resource/hutils/tcl/munch.tcl -c ppc > ctdt.c
abnormal program termination
C:\Users\XXX\AppData\Local\Temp\make426012.sh: fork failed: no child processes [1]make: *** [QofV.out] Error 1 ### Real-Time Workshop build procedure for model: 'QofV' aborted due to an error.>>
### Linking ...rm -f "QofV.out" ctdt.c;nmppc QofV.o QofV_data.o rtGetInf.o rtGetNaN.o rt_logging.o rt_look.o rt_look1d.o rt_nonfinite.o nidll_main.o rt_sim.o ode8.o | tclsh c:/gccdist/WindRiver/vxworks-6.3/host/resource/hutils/tcl/munch.tcl -c ppc > ctdt.c abnormal program termination C:\Users\XXX\AppData\Local\Temp\make426012.sh: fork failed: no child processes [1]make: *** [QofV.out] Error 1 ### Real-Time Workshop build procedure for model: 'QofV' aborted due to an error.>>
Solved!
Go to Solution.

Hello jarcTec,
I am not sure right now if you can do it, but this tutorial might help, also everything was made in Winddows 7 in this one.
http://zone.ni.com/devzone/cda/tut/p/id/11654
Take a quick look and let me know if it works!!!
Luis Fernando
National Instruments Cono Sur
Ingeniería de Campo y Consultoría
http://chile.ni.com/

Hi i have an iphone 4 which is from canada nd i have seen one sim inside it which is a canadian sim ,iam staying in india so can i use that phone in india and please tell me what are the steps ihave to take for using that canadian phone in india

hi i have an iphone 4 which is from canada nd i have seen one sim inside it which is a canadian sim ,iam staying in india so can i use that phone in india and please tell me what are the steps ihave to take for using that canadian phone in india

Only the carrier to whom the device is locked can authorize it's unlocking. Contact the carrier to see if they offer unlocking and if you qualify.

100% CPU using LabView 7.1 and DSC module

Seven years ago I used BridgeView and PXI to execute a project, and the results were so good that after that initial system, I installed one more using BridgeView, and three more using LabView 7.1.
BridgeView is working very well, but lately, LabView 7.1 is giving me more and more problems. It all started in a system running LabView 7.1 and DSC on Windows XP, using a PXI-8187 controller with a PXI-1042 chassis. I have two PXI-6533 digital I/O boards, one PXI-6030E multifunction, one PXI-6713 analog output board, one PXI-6602 counter board and one PXI-8422 serial com. board. In may/06, all of the sudden, the CPU went to a 100% use. Since I am running PID's to control a flash-butt welding machine in a steel factory, this was extremely dangerous. I changed the controller and everything went back to normal. It was running fine until december/06, when the same behavior appeared again. This time changing the controller did not help. We increased the system memory, from 256 MB to 512 MB and everything worked fine. But one month later (january/07) the fault reappeared. This time we changed the chassis and from that moment to this time, we are running smoothly.
Application problems were suspect from the very first time this problem appeared, but I was unable to identify the source, if any. I used PROFILE VI's and apparently the write/read tags were taking all the processor resources. However, changing the routines and disabling communications, and optimizing CPU intensive programs never solved the CPU overload.
Until now, I was aware of only one system showing this erratic behavior. But today I went to check another system, with a totally different application. This one is used to measure the thickness of the steel sheet on a rolling mill. Is not so resource-intensive, but the maintenance folks told me that every time they turned off this particular system, they always had problems trying to turn it on.
I was suspecting of a PLC-communication related issue, but what I found turned my alarms on. I turned off the system, which was fully functional, and turned it back on, and there it was, CPU load at 100%!. Is exactly the same problem that I have on the welder. This system has a PXI-8184, a PXI-1042 chassis, Windows XP, one PXI-6030E, one PXI-6713 and one PXI-6533. I battled for 20 minutes to put the system back in normal conditions.
I specified every single board, installed everything and programmed all the applications. The BridgeView applications have never showed anything like this. I am using the DSC (Datalogging and Supervisory Control Module) on both applications, and the Lookout Protocol Drivers are communicating to Modicon PLC's.
Please, I need help to solve this issue. I believe none of your actual Knowledge Base "100% CPU" articles apply to my case...
Thanks in advance...
Antonio Jimenez
[email protected]

Thanks for your reply...
Yes, sometimes I have the feeling that the systems works again because some file or database gets initialized after so many reboots.
Intentionally I turned off all the events and alarm logging to disk. Also the historical data logging is disabled. This is done by code, every time the main VI is started. This was included precisely to save CPU processing power. However, I am communicating to PLC's, and of course I have to declare variables inside the citadel database to make the communication possible.
Right now I can't have access to the application, because the mill is rolling, but during the next maintenance stop I will check the database location and size, and I could change the directory location the next time the fault comes up.

Companies using labview in India and scope of labview in india

Similar Messages

Maybe you are looking for