Companion Display for iMac

I'm looking for a second display for my iMac. The Thudersbolt display is too big and prciey. Can anyone recommend an monitor with similar diplay characetrics of an iMac? I'm using a 27 inch late 2012 model.
Thanks in advance.
Jeff

When you find a suitable display, note there may be a need to get an extra display adapter and or cable to best attach the display to the computer; this because some adapters or cables may not allow use of a higher resolution, though such may be supported by the computer's graphic card.
There may be Thunderbolt to Other adapters available, so the size of the display is secondary to compatibility.
According to http://mactracker.ca your 27-inch Late 2012 iMac has two Thunderbolt ports...
Display Modes
Dual display extended, video mirroring, AirPlay Mirroring, and Target Display
External Resolution
Up to 2560 by 1600 pixels
Check the different adapters or cables for your model in the Apple Store, where you select a computer (as if to buy) then look into extras, such as custom or BTO, to see they list parts. This information may be helpful when looking for a local product when matching the display to the computer ports. The latest model may offer different configurations. A retail specialist should have them too.
Good luck & happy computing!

Similar Messages

  • Second Display for iMac G5

    Hi all
    Is it possible to setup a send display for an imac G5?

    The iMac G5 uses the Mini VGA port for connecting to external displays and can use either of these $35(Aus) adaptors: 
    Mini VGA - VGA
    Mini VGA - Composite/S-Video.
    regards
    mrtotes

  • Two External Displays for iMac

    Is it possible to run two external displays off of an iMac? I have a small display running and just was giving an old second display so I was wondering if I could run both at the same time?

    It's a real low-down shame that the HD5750-equipped 27-inch iMac cannot support triple displays.
    All of the HD5750 video cards available for Windows PCs support triple displays (two DVI and one DisplayPort) with the Eyefinity technology that was built into the HD5750's GPU.
    Having one iMac 27-inch flanked by two additional 2560x1440 monitors would be so SWEET.

  • 2nd Display for iMac

    hey! i know i can use my imac as a 2nd (mirrored) display and that's cool. I would like to see everything on my TV and I know it has the port for it, but the problem is my mac is like 25 ft from my tv. does anyone know if there's a wireless solution to this? not like apple tv or anything, i want to be able to see everything on my TV, not just media. Sorry, but I couldn't really narrow this down during the search. Thanks!

    Just spent 45' on a live chat with Apple support, who answered my question: it can't be done. The MBA is not able to be used as a secondary display as I had intended. The other way around, so using the iMac's display as a secondary one for the MBA does work.
    Hope this helps somebody to avoid the mistake I made.

  • Secondary 4K display for iMac 27inch

    Will my iMac 27inch (late2012) support a 4K display? - Philips BDM4065UC/00 UHD 4k monitor. i.e. Can i plug this monitor into the thunderbolt port and it run at full resolution. It is for Video Editing. Also, can i plug in another display to the other thunderbolt port and run two external displays?

    Hello Saimurai,
    Thanks for using Apple Support Communities.
    If you want to use a 4K display with a Mac, the Mac needs to fit the requirements below.  Since your iMac is a late 2012 model, it does not support a 4K external display.
    You can use 4K displays and Ultra HD TVs with these Mac computers.
    MacBook Pro (Retina, Late 2013 and later)
    Mac Pro (Late 2013)
    iMac (27-inch, Late 2013 and later)
    Mac mini (Late 2014)
    Using 4K displays and Ultra HD TVs with Mac computers - Apple Support
    Have a great weekend,
    Alex H.

  • LED display for Imac

    I have a 09 imac with the larger dvi port I would like to hook up new Apple LED Cinema Display but dvi is smaller is there an adapter

    Thanks for the info. That would be a Mid-2007 model iMac, which has a mini-DVI video output. To use the LED Cinema Display, you'll need a DVI to DisplayPort adapter, such as this one:
    http://www.atlona.com/Atlona-DVI-to-Mini-DisplayPort-Converter-p-17859.html
    and a mini-DVI to DVI adapter such as this one:
    http://store.apple.com/us/product/M9321G/B
    Regards.

  • Use 21.5 inch mid 2010 imac as a display for 2013 macbook air?

    I would like to use my 21.5 inch mid 2010 imac as a display for my 2013 macbook air. I tried using Screen Recycle, however I would prefer more of a monitor situation than a side-by-side extra screen situation. Ideally with my wireless keyboard and mouse. Does anyone have any advice, or am I asking too much from apple? Thanks very much.

    Yes. With an Ethernet cable and a product such as ScreenRecycler.
    (62511)

  • How can connect my macbook pro mid 2012 to my imac 21.5 inch mid 2010 ?? I want to use imac like a display for macbook.

    How can connect my macbook pro mid 2012 to my imac 21.5 inch mid 2010 ?? I want to use imac like a display for macbook.

    Target Display Mode: Frequently Asked Questions (FAQ)
    with a mini display to mini display cable. Attach it to the Thunderbolt port on your MBP and to the mini display port on your iMac.
    How do I enable TDM?
    Make sure both computers are turned on and awake. 
    Connect a male-to-male Mini DisplayPort or ThunderBolt cable to each computer.
    Press Command-F2 on the keyboard of the iMac being used as a display to enable TDM.
    Note: In Keyboard System Preferences, if the checkbox is enabled for "Use all F1, F2, etc. keys as standard functions keys," the key combination changes to Command-Fn-F2.

  • What is the correct cable for iMac 11,2 Intel core i3, mini dvi to vga or mini display port to vga?

    What is the correct cable for iMac 11,2 Intel core i3, mini DVI to VGA or mini display port to VGA to hook up to projector? Thanks!

    mini-DisplayPort.
    Regards.

  • Can I use my iMac as a 'display' for my MacBook Pro?

    Hi all, I am really hoping someone can help me here.
    I am wondering if I can use my 24" iMac as a display for my MacBook Pro (both running Snow Leopard).
    It's my father's 80th birthday party in about 24 hours time. I am doing up the music and slideshow (thanks Apple - so easy!).
    My plan was to simply take my iMac and use it. However, I managed to drop the wireless keyboard (darn those dogs) and now my keyboard won't work. I have no backup keyboards here (gave the wired one to Dad to use with his Mac mini). I live in a country area with no access to a Mac store and it will take more than 24 hours to get a new one. Went to my local 'other computer' general store last night: I really don't want to buy an ugly black keyboard..... I have just had a great idea:
    Can I network my MacBook Pro and use it as the source for the slide show and simply use the iMac as a display? I have plenty of DVI adaptors but am just not sure how I would go about the software side of things? Or should I simply buy an ugly PC keyboard (and if I do, will the WIndows button work as an Apple button???)
    Any suggestions would be really appreciated.
    Thanks!

    The imac 24 can't be used as a monitor over a DVI connection or the like, Suzanne, but you may be able to achieve what you want to using "Screen Sharing" by networking the two computers. This lets your MBP effectively control what is running on the iMac.
    See HERE for the basic setup. For information about how to access the "shareable" screen from the MBP see HERE.
    One possible problem may be actually getting this set-up on the iMac if it is not already enabled, however, unless you can borrow a keyboard from someone (your password may have to be entered to enable it). You may be able to get around this, if necessary, using the "keyboard viewer" (which you can place in the menubar using System preferences > Keyboard, if you don't already have it there).
    Cheers
    Rod

  • How can i use my old iMac as a extended desktop display for my new iMac?

    I recently purchased a 21.5 in iMac and wanted to use my old iMac as a extended desktop. My new iMac has thunderbolt and USB 3.0 connections while my old iMac has firewire (400 and 800), USB 2.0 and mini-DVI. Is this posible?

    Welcome to Apple Support Communities
    If your iMac has got Mini-DVI, you have a 17, 20 or 24-inch iMac that doesn't support Target Display. Late 2009 and Mid 2010 27-inch iMacs, and iMacs with Thunderbolt can be used as external displays. Read > http://support.apple.com/kb/PH11302?viewlocale=en_US&locale=en_US
    If your old iMac doesn't support Target Display mode, you can use ScreenRecycler to use your old iMac as an extended display for the new iMac. The only thing you need is that both Macs are connected to the same network

  • How can I use my rMBP as a secondary display for my iMac using thunderbolt?

    Based on this thread, it's not possible: https://discussions.apple.com/message/19207767
    But, I'm stubborn and refuse to believe that. Maybe they've released a software update (e.g., in Mountain Lion) that has since made this possible? Maybe there is an app that allows for this?
    Note that I don't want a solution that involves network hacks... this is at work, and I'd rather not slow down the network for others. And I'm not interested in the reverse setup (i.e., using my iMac as a secondary display for my rMBP).
    iMac: 27-inch, Late 2012. NVIDIA GeForce GTX 660M 512 MB. OS X 10.8.4.
    rMBP: Retina, Mid 2012 (15" I think). NVIDIA GeForce GT 650M 1024 MB. OS X 10.8.4.

    It's not possible. You can use the iMac as a display for the MBP,  but the reverse is not possible. The MBP does not have Target Display Mode as a feature and no third-party app nor hack can enable something that doesn't exist. The only way to accomplish this will be one of the network solutions.
    Regards.

  • How do i set up a second display for my iMac desktop?  I want to use both displays at the same time.

    how do i set up a second display for my iMac desktop?  I want to use both displays at the same time.  My iMac is the 24" Late 2006 model.  I recall that there is a cord for plugging in a second monitor, but I want to make sure that i can use both monitors side-by-side at the same time.  thank you.

    If the Display supports DVI, then you will need a > Mini-DVI to DVI Adapter and a DVI cable.
    If the Display only supports VGA, then you wiil need a > Mini DVI to VGA Adapter and a VGA cable.
    Noting that the (digital) DVI is far better than the (analog) VGA connection.
    Also see > Using Dual Displays on Mac OS X: The Experience

  • How to use the second display for installation OS in my vertical lines iMac

    My 17" iMac display is full of vertical lines, it is unuseable. Does anyone know how to use the second display for Mac OS X or disable the first display for installation Mac OS x ?

    Go to: *System Preferences > Displays* and select the Arrangement tab, then relocate your Menu bar by dragging it to the other display.
    Unfortunately there is no Hardware or Software switch to turn off the iMac's Internal Display.

  • How to use the iMac last generation as a display for a PC

    Hello,
    Can someone confirm if it's possible to use an iMac last generation as a display for a PC (Windows)  and if, yes, which type of cable or accessory is required?
    Thanks
    Stephanie

    Sorry, but you probably can't. The current and previous generation of iMac can only be used as displays with other Thunderbolt-equipped systems.
    http://support.apple.com/kb/HT3924
    Only if your PC has a Thunderbolt port that supports video out would this be possible, and such systems are currently rather rare.
    Regards.

Maybe you are looking for

  • How do i update iPhoto with another apple id?

    Hi, I am trying to update iphoto and imovie as I can't use them with the new operating system I just installed. Problem is, is that my ex-husband's Apple ID is associated with the account as he originally bought the computer for me and loaded the app

  • LaCie hd having trouble ejecting

    Hello one and all, I've been experiencing a rather strange problem when using my LaCie external hard drive in iMovie 6 HD.  After importing footage into iM6 I then go to save the project and get the following message : "The project could not be saved

  • Code won't compile

    I have recently installed Java SDK 1.4 on my pc and am trying to run a program that I have created on a linux system. When I run it on my home pc, I get the error, cannot resolve symbol, at every instance where there is use of the SerialPort and simi

  • Can I have iTunes show all my playlists?  Two iPods

    I have two ipods.  One has less space than the other.  I sync music manually in iTunes.  When I open iTunes should'nt I see all playlists no matter if I set them up on Ipod #1 vs #2? Does that make sense? So I create a playlist on ipod #1, and then I

  • Am i the only one with yellow/orange pictures?

    All of my pictures that are taken in anything but the brightest settings requiring flash turn out very orange/yellow tones. One of the main reasons i upgraded this phone was for the flash and it seems that it was a waste.