Company Address problem in new Client

Hi,
I created a new client and logged in with SAP. I tried to create user but no company address has been maintained in new client. I am getting error: No default co. address has been maint. in the system. Create an address. When I go to define company address, I am getting time zone error Time zone CET does not exist. How can I create new user with default SAP login and how do I overcome company address, time zone problem? Can someone give step by step after new customizing client?
Thanks,
Sangita

Hi,
When ever you create a new SAP APP Server you will get 000 client by default ya.
Create a new user ID SUPERUSER with the method copy from DDIC and by default all the chk boxes will get selected and one wil not
be cheked by default i.e. the Address box. see u can select the box here itself (or) u can process the further steps ya.
Create a new client 100 and select the client possition as CUST client and select the options as below
1)Dependent Level as : Automatic recording of changes allowed.
2)Independent Level as : Customizing and Workbench allowed.
3) Overwriting is allowed.
Login with 100 client and with SAP* ID and Password as PASS.
go to SCCL and select SAP ALL and run it in Batch job and in postinstallations steps
go and chk SICK/ go to SE06 / in configuring STMS it will ask you to maintain the company address here maintain the info and proceed with further ya.
Note: If you are satisfied with my guided lines drop me the points.
Prashanth

Similar Messages

To copy a company code to a new client

Hi,
I want to copy the ides company 1000 and its related data and customization from client 800 to a new client 900. How can i do that?

Hi,
1.Create a logical system in BD54,
2.Create a new client(900) through transaction SCC4 and assign the logical system created in STEP-1
3.Login into the newly created client using UID: sap* and PWD: pass
4.Create a client copy through SCCL transaction selecting the source client as 800 and selecting the desired profile for customization.
Regards,
Laawanya

Problem Creating New Client in SAP NW2004s ABAP+JAVA LINUX

Hi,
I installed successfully NW2004s dual stack on linux vmware (SUSE10 enterprise server). This stack give me two client by default, 000 and 001. System gives me default user sap* and password: sapn4sadm
I want to implement the process for BW enabling, and I want to create New Client for it. I have been used SCC4 to create a new client by logging on with the Client 000, but the problem start, when I log-on with the new client.
Client: 002
User: sap*
Password: pass
I have tried system default password of sap* , but that also dosen't help.
It doesn't work, I also try RZ10 to change the value of login/no_automatic_user_sapstar = 0, but I don't find any profile , when I click on the profile field, i get the message "Profile not found". I am not figuring out where I am doing wrong.
How can I success to create a new Client in which i could log on with sap* user. Please Help me
All yours help would be highly rewarded.
Obaid.

In order to edit profiles In RZ10, you must first import them.
Menu: Utilities --> Import Profiles --> Of Active Servers
After this you can add your parameter.
One alternative is to edit the profile directly with vi, restart the system, do all client copy tasks, remove the parameter with vi, restart the system again and then import the active profiles.
the profiles are located in directory
/usr/sap/<SID>/SYS/profile
and the filename is something like this
<SID>_DVEBMGS<instancenr>_<hostname>

Posting from a non-BT address on the new client

I've this week been migrated to the new BT email client.
I'm having a problem about posting from a non-BT address. In the past using BT, I had no problems.
I have an email address/domain (managed by FreeParking) that I've used for very many years as my public persona. In the past with BT, I haven't had any problem about sending from that address, but now I can't.
I can still receive messages from the address because they are redirected by FreeParking.
I have tried to set up an account for this address. This works in the sense that the account appears in the left-side menu under my main account. However, if I click on it I get a 'Selected Account [xxxxx] is unavailable'. If I use the server 'mail.btinternet.com' under a POP setting, I get that message and a 'Loading Data, please wait' followed by a 'your session has expired. Please log in again to continue'.
Any help would be much appreciated.
Chris

I have a similar problem as Chris.
I've just spent half an hour attaching some images of the problem only to be told that my post cannot be more than 20,000 characters. It wasn't. I've started again.
I have a GoDaddy account which I've set up in BT Mail. The connection is working as it shows how many messages I have in that mail box but the messages just won't open. The page eventually times out.
The hotmail account won't work at all, it gives me the same message as Chris

Problems after new Client IR10

Hello Guys,
I just installed the new IR10 and after that I could NOT start msi-installation from servervolume anymore.
e.g. adobe professional / groupwise 2012 setups.
got MSI-Error.
I tried this with Windows 8.1 and 7 on 3 different Machines
after rollback to IR9 it was functional again
Greets
Uwe

groupwise install log
maybe Problem with too long filenames ?
in german I read "DOWNLOADS" is not a valid short filename
=== Verbose logging started: 03.12.2014 14:41:04 Build type: SHIP UNICODE 5.00.9600.00 Calling process: C:\Windows\SysWOW64\MSIEXEC.EXE ===
MSI (c) (74:7C) [14:41:04:194]: Font created. Charset: Req=0, Ret=0, Font: Req=MS Shell Dlg, Ret=MS Shell Dlg
MSI (c) (74:7C) [14:41:04:194]: Font created. Charset: Req=0, Ret=0, Font: Req=MS Shell Dlg, Ret=MS Shell Dlg
MSI (c) (74:08) [14:41:04:194]: Resetting cached policy values
MSI (c) (74:08) [14:41:04:194]: Machine policy value 'Debug' is 7
MSI (c) (74:08) [14:41:04:194]: ******* RunEngine:
******* Product: \\VUX-HRZ-PORTAL3\DATEN\DOWNLOADS\nopublic\groupwise\gw12.0. 3_client_win_multi\client\win32\groupwise.msi
******* Action:
******* CommandLine: TRANSFORMS="1031.MST" SETUPEXEDIR="\\VUX-HRZ-PORTAL3\DATEN\DOWNLOADS\nopublic\groupwise\gw12.0. 3_client_win_multi\client\win32"
MSI (c) (74:08) [14:41:04:225]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (c) (74:08) [14:41:04:241]: Machine policy value 'DisableUserInstalls' is 0
MSI (c) (74:08) [14:41:04:288]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (74:08) [14:41:04:335]: Cloaking enabled.
MSI (c) (74:08) [14:41:04:335]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (74:08) [14:41:04:335]: End dialog not enabled
MSI (c) (74:08) [14:41:04:335]: Original package ==> \\VUX-HRZ-PORTAL3\DATEN\DOWNLOADS\nopublic\groupwise\gw12.0. 3_client_win_multi\client\win32\groupwise.msi
MSI (c) (74:08) [14:41:04:335]: Package we're running from ==> C:\Windows\Installer\5b45b.msi
MSI (c) (74:08) [14:41:04:335]: APPCOMPAT: Uninstall Flags override found.
MSI (c) (74:08) [14:41:04:335]: APPCOMPAT: Uninstall VersionNT override found.
MSI (c) (74:08) [14:41:04:335]: APPCOMPAT: Uninstall ServicePackLevel override found.
MSI (c) (74:08) [14:41:04:335]: APPCOMPAT: looking for appcompat database entry with ProductCode '{00335E50-4DC1-4E01-A60C-91C5746D489E}'.
MSI (c) (74:08) [14:41:04:335]: APPCOMPAT: no matching ProductCode found in database.
MSI (c) (74:08) [14:41:04:335]: MSCOREE not loaded loading copy from system32
MSI (c) (74:08) [14:41:04:350]: Machine policy value 'DisablePatch' is 0
MSI (c) (74:08) [14:41:04:350]: Machine policy value 'AllowLockdownPatch' is 0
MSI (c) (74:08) [14:41:04:350]: Machine policy value 'DisableLUAPatching' is 0
MSI (c) (74:08) [14:41:04:350]: Machine policy value 'DisableFlyWeightPatching' is 0
MSI (c) (74:08) [14:41:04:350]: Looking for file transform: C:\Windows\Installer\{00335E50-4DC1-4E01-A60C-91C5746D489E}\1031.MST
MSI (c) (74:08) [14:41:04:350]: Original transform ==> C:\Windows\Installer\{00335E50-4DC1-4E01-A60C-91C5746D489E}\1031.MST
MSI (c) (74:08) [14:41:04:350]: Transform we're running from ==> C:\Windows\Installer\{00335E50-4DC1-4E01-A60C-91C5746D489E}\1031.MST
MSI (c) (74:08) [14:41:04:350]: SOFTWARE RESTRICTION POLICY: Verifying transform --> 'C:\Windows\Installer\{00335E50-4DC1-4E01-A60C-91C5746D489E}\1031.MST' against software restriction policy
MSI (c) (74:08) [14:41:04:350]: Note: 1: 2262 2: DigitalSignature 3: -2147287038
MSI (c) (74:08) [14:41:04:350]: SOFTWARE RESTRICTION POLICY: C:\Windows\Installer\{00335E50-4DC1-4E01-A60C-91C5746D489E}\1031.MST is not digitally signed
MSI (c) (74:08) [14:41:04:350]: SOFTWARE RESTRICTION POLICY: C:\Windows\Installer\{00335E50-4DC1-4E01-A60C-91C5746D489E}\1031.MST is permitted to run at the 'unrestricted' authorization level.
MSI (c) (74:08) [14:41:04:350]: Note: 1: 2262 2: Patch 3: -2147287038
MSI (c) (74:08) [14:41:04:350]: Note: 1: 2205 2: 3: PatchPackage
MSI (c) (74:08) [14:41:04:350]: Note: 1: 2262 2: _Tables 3: -2147287038
MSI (c) (74:08) [14:41:04:350]: Note: 1: 2262 2: _Columns 3: -2147287038
MSI (c) (74:08) [14:41:04:350]: Note: 1: 2262 2: Media 3: -2147287038
MSI (c) (74:08) [14:41:04:350]: Note: 1: 2262 2: File 3: -2147287038
MSI (c) (74:08) [14:41:04:350]: TRANSFORM: 'PatchPackage' table is missing or empty. No pre-transform fixup necessary.
MSI (c) (74:08) [14:41:04:350]: TRANSFORM: Applying regular transform to database.
MSI (c) (74:08) [14:41:04:350]: Note: 1: 2262 2: _Tables 3: -2147287038
MSI (c) (74:08) [14:41:04:350]: Note: 1: 2262 2: _Columns 3: -2147287038
MSI (c) (74:08) [14:41:04:350]: Note: 1: 2262 2: AdminExecuteSequence 3: -2147287038
MSI (c) (74:08) [14:41:04:350]: Note: 1: 2262 2: AdminUISequence 3: -2147287038
MSI (c) (74:08) [14:41:04:350]: Note: 1: 2262 2: AdvtExecuteSequence 3: -2147287038
MSI (c) (74:08) [14:41:04:350]: Note: 1: 2262 2: AdvtUISequence 3: -2147287038
MSI (c) (74:08) [14:41:04:350]: Note: 1: 2262 2: Binary 3: -2147287038
MSI (c) (74:08) [14:41:04:350]: Note: 1: 2262 2: File 3: -2147287038
MSI (c) (74:08) [14:41:04:350]: Note: 1: 2262 2: CheckBox 3: -2147287038
MSI (c) (74:08) [14:41:04:350]: Note: 1: 2262 2: Component 3: -2147287038
MSI (c) (74:08) [14:41:04:350]: Note: 1: 2262 2: Icon 3: -2147287038
MSI (c) (74:08) [14:41:04:350]: Note: 1: 2262 2: ComboBox 3: -2147287038
MSI (c) (74:08) [14:41:04:350]: Note: 1: 2262 2: Directory 3: -2147287038
MSI (c) (74:08) [14:41:04:350]: Note: 1: 2262 2: ControlCondition 3: -2147287038
MSI (c) (74:08) [14:41:04:350]: Note: 1: 2262 2: ControlEvent 3: -2147287038
MSI (c) (74:08) [14:41:04:350]: Note: 1: 2262 2: ModuleExclusion 3: -2147287038
MSI (c) (74:08) [14:41:04:350]: Note: 1: 2262 2: CreateFolder 3: -2147287038
MSI (c) (74:08) [14:41:04:350]: Note: 1: 2262 2: CustomAction 3: -2147287038
MSI (c) (74:08) [14:41:04:350]: Note: 1: 2262 2: ModuleSignature 3: -2147287038
MSI (c) (74:08) [14:41:04:350]: Note: 1: 2262 2: EventMapping 3: -2147287038
MSI (c) (74:08) [14:41:04:350]: Note: 1: 2262 2: FeatureComponents 3: -2147287038
MSI (c) (74:08) [14:41:04:350]: Note: 1: 2262 2: InstallExecuteSequence 3: -2147287038
MSI (c) (74:08) [14:41:04:350]: Note: 1: 2262 2: InstallUISequence 3: -2147287038
MSI (c) (74:08) [14:41:04:350]: Note: 1: 2262 2: ListBox 3: -2147287038
MSI (c) (74:08) [14:41:04:350]: Note: 1: 2262 2: ListView 3: -2147287038
MSI (c) (74:08) [14:41:04:350]: Note: 1: 2262 2: LockPermissions 3: -2147287038
MSI (c) (74:08) [14:41:04:350]: Note: 1: 2262 2: Media 3: -2147287038
MSI (c) (74:08) [14:41:04:350]: Note: 1: 2262 2: ModuleComponents 3: -2147287038
MSI (c) (74:08) [14:41:04:350]: Note: 1: 2262 2: MsiAssembly 3: -2147287038
MSI (c) (74:08) [14:41:04:350]: Note: 1: 2262 2: MsiAssemblyName 3: -2147287038
MSI (c) (74:08) [14:41:04:350]: Note: 1: 2262 2: ModuleDependency 3: -2147287038
MSI (c) (74:08) [14:41:04:350]: Note: 1: 2262 2: MsiFileHash 3: -2147287038
MSI (c) (74:08) [14:41:04:350]: Note: 1: 2262 2: Patch 3: -2147287038
MSI (c) (74:08) [14:41:04:350]: Note: 1: 2262 2: Registry 3: -2147287038
MSI (c) (74:08) [14:41:04:350]: Note: 1: 2262 2: RemoveFile 3: -2147287038
MSI (c) (74:08) [14:41:04:350]: Note: 1: 2262 2: ReserveCost 3: -2147287038
MSI (c) (74:08) [14:41:04:350]: Note: 1: 2262 2: TextStyle 3: -2147287038
MSI (c) (74:08) [14:41:04:350]: Note: 1: 2262 2: Upgrade 3: -2147287038
MSI (c) (74:08) [14:41:04:350]: Note: 1: 2262 2: _Validation 3: -2147287038
MSI (c) (74:08) [14:41:04:350]: Note: 1: 2262 2: ISComponentExtended 3: -2147287038
MSI (c) (74:08) [14:41:04:350]: Note: 1: 2262 2: ISCustomActionReference 3: -2147287038
MSI (c) (74:08) [14:41:04:350]: Note: 1: 2262 2: ISDFLInfo 3: -2147287038
MSI (c) (74:08) [14:41:04:350]: Note: 1: 2262 2: _MsiPatchTransformView 3: -2147287038
MSI (c) (74:08) [14:41:04:350]: Note: 1: 2262 2: #_BaselineCost 3: -2147287038
MSI (c) (74:08) [14:41:04:350]: Note: 1: 2262 2: #_BaselineFile 3: -2147287038
MSI (c) (74:08) [14:41:04:350]: Note: 1: 2262 2: #_BaselineData 3: -2147287038
MSI (c) (74:08) [14:41:04:350]: Note: 1: 2262 2: #_PatchCache 3: -2147287038
MSI (c) (74:08) [14:41:04:350]: APPCOMPAT: looking for appcompat database entry with ProductCode '{00335E50-4DC1-4E01-A60C-91C5746D489E}'.
MSI (c) (74:08) [14:41:04:350]: APPCOMPAT: no matching ProductCode found in database.
MSI (c) (74:08) [14:41:04:350]: Transforms are not secure.
MSI (c) (74:08) [14:41:04:350]: Transforming table Property.
MSI (c) (74:08) [14:41:04:350]: Transforming table Control.
MSI (c) (74:08) [14:41:04:350]: PROPERTY CHANGE: Adding MsiLogFileLocation property. Its value is 'C:\Users\upilz\AppData\Local\Temp\MSI6f5c2.LOG'.
MSI (c) (74:08) [14:41:04:350]: Command Line: TRANSFORMS=1031.MST SETUPEXEDIR=\\VUX-HRZ-PORTAL3\DATEN\DOWNLOADS\nopublic\groupwise\gw12.0. 3_client_win_multi\client\win32 CURRENTDIRECTORY=\\VUX-HRZ-PORTAL3\DATEN\DOWNLOADS\nopublic\groupwise\gw12.0. 3_client_win_multi\client\win32 CLIENTUILEVEL=0 CLIENTPROCESSID=5492
MSI (c) (74:08) [14:41:04:350]: PROPERTY CHANGE: Adding PackageCode property. Its value is '{04FA1456-97FD-4F90-9BF5-78FF644CEF8A}'.
MSI (c) (74:08) [14:41:04:350]: PROPERTY CHANGE: Adding TRANSFORMS property. Its value is 'C:\Windows\Installer\{00335E50-4DC1-4E01-A60C-91C5746D489E}\1031.MST'.
MSI (c) (74:08) [14:41:04:350]: Product Code passed to Engine.Initialize: '{00335E50-4DC1-4E01-A60C-91C5746D489E}'
MSI (c) (74:08) [14:41:04:350]: Product Code from property table before transforms: '{00335E50-4DC1-4E01-A60C-91C5746D489E}'
MSI (c) (74:08) [14:41:04:350]: Product Code from property table after transforms: '{00335E50-4DC1-4E01-A60C-91C5746D489E}'
MSI (c) (74:08) [14:41:04:350]: Product registered: entering maintenance mode
MSI (c) (74:08) [14:41:04:350]: Determined that existing product (either this product or the product being upgraded with a patch) is installed per-machine.
MSI (c) (74:08) [14:41:04:350]: PROPERTY CHANGE: Adding ProductState property. Its value is '5'.
MSI (c) (74:08) [14:41:04:350]: PROPERTY CHANGE: Adding ProductToBeRegistered property. Its value is '1'.
MSI (c) (74:08) [14:41:04:366]: Note: 1: 2303 2: 144 3: \\VUX-HRZ-PORTAL3\DATEN\
MSI (c) (74:08) [14:41:04:366]: Note: 1: 1325 2: DOWNLOADS
MSI (c) (74:08) [14:41:04:366]: Note: 1: 2303 2: 144 3: \\VUX-HRZ-PORTAL3\DATEN\
MSI (c) (74:08) [14:41:04:366]: Note: 1: 1325 2: DOWNLOADS
DOWNLOADS ist kein gltiger kurzer Dateiname.
Dieses Installationspaket konnte nicht geffnet werden. Stellen Sie sicher, dass das Paket vorhanden ist und Sie darauf zugreifen knnen, oder wenden Sie sich an den Hersteller der Anwendung, um sicherzustellen, dass es sich um ein gltiges Windows-Installationspaket handelt.
\\VUX-HRZ-PORTAL3\DATEN\DOWNLOADS\nopublic\groupwise\gw12.0. 3_client_win_multi\client\win32\groupwise.msi
MSI (c) (74:08) [14:41:04:366]: Note: 1: 1729
MSI (c) (74:08) [14:41:04:366]: Produkt: GroupWise -- Die Konfiguration ist fehlgeschlagen.
MSI (c) (74:08) [14:41:04:366]: Das Produkt wurde durch Windows Installer neu konfiguriert. Produktname: GroupWise. Produktversion: 12.0.3. Produktsprache: 1031. Hersteller: Novell. Erfolg- bzw. Fehlerstatus der neuen Konfiguration: 1619.
MSI (c) (74:08) [14:41:04:366]: MainEngineThread is returning 1619
=== Verbose logging stopped: 03.12.2014 14:41:04 ===

Company address to be printed in a new window

Hi all,
I need to print the Company address in a new window. I have created the window, and i have included the standard text to print the Company address, which was specified in the technical Details. But still i don't see the address. Should the address number has to be passed to the standard text ? If so, How it has to be done?
Thanks,
ABAPer

Hi,
If it is a standard text address, pass as follows:
/: INCLUDE &T024E-TXADR& OBJECT TEXT ID ADRS LANGUAGE &EKKO-SPRAS&
Check table T024 for the standard text line.
or pass it as
/:   ADDRESS PARAGRAPH AS
/:     TITLE    &LFA1-ANRED&
/:     NAME     &LFA1-NAME1&, &LFA1-
/:     STREET   &LFA1-STRAS&
/:     POBOX    &LFA1-PFACH& CODE &
/:     CITY     &LFA1-ORT01&, &LFA1-
/:     POSTCODE &LFA1-PSTLZ&
/:     COUNTRY &LFA1-LAND1&
/:     REGION   &LFA1-REGIO&
/:     FROMCOUNTRY &T001-LAND1&
/:   ENDADDRESS
Regards
Subramanian

Problem Synchronizing Company Address in SCUG

Sorry, I'm not sure which forum I should post this message in but I'm in the process of implementing CUA in our clients and am trying to synchronize the Company address in the clients, but I get an error without any helpful information. I do notice that the clients in which I'm having a problem synchronizing have a different layout for company address. For instance, the central system's layout uses Country and Region in SUCOMP whereas the client in which I'm having problems synchronizing uses Country/City/State/and ZIP. The only error indicator I get is the red box with an "@5C@". I have been searching for solutions without much luck. Is this because the address layout is different (although the sync was successful in another client that had a different layout) or is it likely something else?

>
Chanda Barrick wrote:
> Sorry, I'm not sure which forum I should post this message in but I'm in the process of implementing CUA in our clients and am trying to synchronize the Company address in the clients, but I get an error without any helpful information. I do notice that the clients in which I'm having a problem synchronizing have a different layout for company address. For instance, the central system's layout uses Country and Region in SUCOMP whereas the client in which I'm having problems synchronizing uses Country/City/State/and ZIP. The only error indicator I get is the red box with an "@5C@". I have been searching for solutions without much luck. Is this because the address layout is different (although the sync was successful in another client that had a different layout) or is it likely something else?
Since you haven't received any replies, let me give this a shot.
What happens when you run SCUG on parent CUA and select child CUA system and click on "Company Addresses"? Do you at least get a "Sychronization of the Company Address" list. Please reply/post with "Overview" output.
John N.

Cisco WLC Client MAC address backup to new Controller & ISE

Hi All,
We have an existing 4400 controller with MAC filtering for clients configured. Right Now, we are migrating to 5500 WLC and ISE setup.
We want to use MAC filtering due to company policies on the new Controller as well as ISE.
Is there a way (from GUI/CLI) that we can export the client MAC Addresses into an Excel file from existing WLC to new WLC & ISE?
Thanks,
CJ

On the CLI issue a show macfilter summary and then import that into excel or a text editor.
Sent from Cisco Technical Support iPhone App

New client/instance with single company data

Hello,
Having to acquire a new company, the problem comes up when the actual SAP client contains more than one society.
Is it possible to have a new client or instance with data belonging to a single one of these managed companies?
How can it be copied/extracted, if possible?
Thanks

solved

Problem: The wireless client Obtaining IP address.

Problem: The wireless client Obtaining IP address.
Setup.
I have a fiber circuit which feedes my Wan port. Then
I made a local network that then I branch off to five other AirPort Extremes.
Acting as access points with a static IP for local network, with no security enable and extending the wireless network name is off.
With both types of models, the new & older all extreme models.
Sym:
I can reset the head end airport router with will fix the problem for a day or so.
Question:Can the wireless client cause this type of problem. the reason I asked, everything was working fine for the last 2 two years until I added a new access point. I have change it out with another unit which did not help the dhcp problem.
So my thinking either my head end router is starting to go bad with DHCP or a wireless client interaction may be locking up DHCP until I restart the router again.
Has any one had the same type of problems with DHCP???

Thanks for the quick response.
The first option sounds like I need some type of wireless software which at the moment I'm not utilizing so don't know how to do that.
option 2 also sounds foreign to me ! ;-)
Can you add some details or point me to any links you can ref me to so I can try to familiarize myself with these options ?
Regards
Mark

My original apple id is not an email address . I bought iCloud memory via that same account no problem. When setting up iCloud on iPad you cannot have a primary iCloud account unless it has an email address . Made new account but can you change originalI'

My original apple id is not an email address .
I bought iCloud memory via that same account no problem.
When setting up iCloud on iPad you cannot have a primary iCloud account unless it has an email address .
Made new account as per instruction ie [email protected] works fine
BUT as I want to utilise the money spent on the additional memory it would be great to use the initial account set up as my primary HOWEVER as far as I have tried the initial apple ID CANNOT be changed. Bit confused actually any usefull guidance will be greatly appreciated. Thanks

See Here > Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...
lmerchant wrote:
My new phone has an old apple ID associated with iCloud only. I cannot delete the account as it has "Find my iPhone" turned on.
Activation Lock in iOS 7 > http://support.apple.com/kb/HT5818

I created an Apple ID for iTunes using a work email address and left that company before I had an opportunity to change the email and password for that account. How do I change the email address to a new one that I can access?

I created an Apple ID for iTunes using a work email address and left that company before I had an opportunity to change the email and password for that same account. Now I can't seem to login to that account and I can't choose the option for forgot password because it will send email to the old workplace. How do I change the email address to a new one that I can access?

If you remeber the password to that Apple ID then follow these steps
1 - Make sure you have an email address that is NOT an Apple ID
2 - Go to AppleID.Apple.com
3 - Where it reads Manage Apple ID - Sign in
Once you are signed in want to make sure the email address you are wanting to use is NOT set up as a "Recovery/Rescue" email for this account.
[To check this - Main page where you see Primary ID - below do you see the email address you want to use listed towards the bottom? Yes - Delete / No - Good ./. If made any adjustments "Save" Next on the left select "Password & Security" - Answer your security questions you set up "if you have any" then scroll towards the bottom and check to see if you see the email address you want to use. Yes - Delete / No - Good] <-> Also you can change your password on this page as well. Any adjustments made "Save"
Once this is done go back to the main page where you should read "Primary ID" and change the email address that is showing to the new email address youo want. "Save" Done
I learned this not to long ago and worked for me. Hope this helps you!

Internal error - NUMBER_GET_NEXT call error while craeating new company address

Dear Team,
In solution manager while we going to create company address through tcode SUCOMP and during saving the record error message occur as "Internal error -NUMBER_GET_NEXT call error".
Please suggest for solution
Regards,
Ajay

Dear Mr. Rafikul,
There is no ABAP dump but in SM21 there are error message:-
"Documentation for system log message D0 1 :
The transaction has been terminated. This may be caused by a
termination message from the application (MESSAGE Axxx) or by an
error detected by the SAP System due to which it makes no sense to
proceed with the transaction. The actual reason for the termination
is indicated by the T100 message and the parameters.
Additional documentation for message E0 022
EDI: Error process code '&' is not available
&CAUSE&
A syntax error was identified while processing an inbound
<DS:GlOS.IDoc>IDoc. There is no entry with the key &v1& in 'Error
process codes'. However, this process code was determined from the
table of status values (TEDS1).
&WHAT_TO_DO&
Please check the 'Error process codes'.
IF &DEVICE&='SCREEN'
<DS:TRAN.WE40>Execute function
ENDIF
One document format shows more"
Now my one of problem solved. When i have go to SU01 and checked in address tab, its work now. Earlier its was not work.May be executed the report Z_OSSNOTE_445575 in system, its should be working. Thanks for your answer.
But till m facing in SUCOMP for creating company address.
Regards,
Ajay Asawa

Cache Refresh Problem in SXI_CACHE Transaction in new client 700

Hi Experts,
    We have installed and configured the new PI7.1 server and were checking its readiness by going through the Readiness Check Document. At one stage while we run the transaction SXI_CACHE in client 700 we are not getting the option of " Start Complete Cache Refresh" in highlighted mode. Thus we are not able to refresh the cache in client 700. But if I login in Client 001 and login using SAP* and run the SXI_CACHE I am able to see all the pipeline steps as well the option for complete Cache refresh and Adapter cache referesh is in Highlighted mode. The status is also green. Can somebody us in knowing where should we look into to solve this problem so that these option are available in the new client for refershing the CACHE.
Thanks
Regards
suk4023

Hi Soujanya,
    Yes we tried with the link given by you . we got the folowing error
403   Forbidden
SAP NetWeaver Application Server 7.11 / AS Java 7.11
Error: You are not authorized to view the requested resource.
Troubleshooting Guide https://sdn.sap.com/irj/sdn/wiki?path=/display/jsts/home
Details: No details available
Yes we tried by restaring the system too, but the status is same.
Any more inputs will be appreciated............
Thanks
Regards
Suk4023

Problem:Can not logon the new client after SCC4

Hi There,
I am doing client copy. in SCC4 i've added a new client 100, and then i try to logon to client 100 using SAP*/PASS and execute SCCL, but system always reports errors:"name or password is incorrect (repeat logon)".
can anyone tell me what should the possible problem.
Any responses will be awarded,
Regards,
Samson

HI Samson
try this
Set the profile parameter login/no_automatic_user_sapstar to 0.
Restart the application server.
Log on to the new client with kernel user SAP* and password PASS.
http://sap.ittoolbox.com/groups/technical-functional/sap-basis/unable-to-login-with-sap-user-1423523?cv=expanded
hope this will help you
cheers
dEE

Company Address problem in new Client

Similar Messages

Maybe you are looking for