Company code does not exist error while sending idoc

Hi Expert
I am trying to send idoc from one client(800) to another client(810).I have faced error Company code does not exist, searched scn ,Got solution if company code does not exist in reciever system(810 client) ,it will show this error .Then i have tried to give specific company code which is exist in 810 client also .But same issue is coming . So what exactly the issue can any one say .
More Info:FI(Finance) header items and line items are sending .
Thanks & Regards

Hi,
Your company code not activated for material management. Few pre-requisites to create material and one is to activate company code for material management
Please activate in T.code: OMSY,
[For example: For Fiscal year variant K4]
In OMSY steps, u have to enteru2026u2026u2026..
Company Code (enter your company code name 2001)u2026u2026u2026u2026u2026.
Company Name..
Fiscal Year of Current Period 2009
Current period (posting period) 03( )
Fiscal year of previous period 2008( will come automatic)
Month of previous period 02( will come automatic)
Fiscal year of last period of previous year 2008
Last month of previous year 12
Allow Posting to Previous Period (Back posting)
Disallow back posting after a change of period
Now create material with T.code; MM01
Regards,
Biju K

Similar Messages

Cross system company code does not exist.

Hello,
I am trying to upload Cost center through IDOC menthod.
Message type of IDOC is : COSMAS
Basic Type : COSMAS01
But i am getting a error as Cross system company code does not exist in ( Create IDOC Overview).
Kinly help me in resolving this issue.
Regards,
Hemanth.
Edited by: hemanth kumar on Feb 20, 2009 3:08 PM

Hi Shweta
Have you checked with the data i.e. company code .
May the company code which you are passing is not there in ur receiver system.
Just check it out.
Regards
-Mitesh

Number range does not exist error while creating shopping cart

Hi,
I am working in SRM 5.0 classic scenario..while creating a shopping cart it gives error as number range 01 does not exist.(while clicking shop button).
Thanks&Regards,
Aravind.

Hi,
Please maintain SC number range and transaction type assignment in SRM SPRO.
--> cross application -> number range
Kind regards,
Yann

IDocStatus:Error in ALE service Cross-system company code does not exist

HI All,
I am sending CREMAS04 IDOC from XI to one R/3 system,and in R/3 a vendor should get created in master table.
My IDOC is getting posted successfully but in R/3 system I am getting error that
IDoc: 0000000000705816 Status: Error in ALE service
T100 Text: Cross-system company code XXX does not exist
I have created partner profiles in receiver system and in partner profiles I have set the process code as CRE1.
Please help me to resolve this problem.

Hi Shweta
Have you checked with the data i.e. company code .
May the company code which you are passing is not there in ur receiver system.
Just check it out.
Regards
-Mitesh

Error : COmpany code does not exist or has not been fully maintained

Hi ,
I tried creating a material with industry sector : mechanical , material type : raw material.
i selected basic data 1 and 2 view or MRP 1 view for views , i gave plant as SUJA and storage location value S001 ( plant and stor loc i have created in the company code 2001)
but i get this error COmpany code 2001 does not exist or has not been fully maintained..
I created COMPANY CODE using SPRO - Entreprise structure --definition - financial accounting --define , copy , check , delete company code..
kindly suggest me the solution for this error..

Hi,
Your company code not activated for material management. Few pre-requisites to create material and one is to activate company code for material management
Please activate in T.code: OMSY,
[For example: For Fiscal year variant K4]
In OMSY steps, u have to enteru2026u2026u2026..
Company Code (enter your company code name 2001)u2026u2026u2026u2026u2026.
Company Name..
Fiscal Year of Current Period 2009
Current period (posting period) 03( )
Fiscal year of previous period 2008( will come automatic)
Month of previous period 02( will come automatic)
Fiscal year of last period of previous year 2008
Last month of previous year 12
Allow Posting to Previous Period (Back posting)
Disallow back posting after a change of period
Now create material with T.code; MM01
Regards,
Biju K

'Purchasing document does not exist' error while testing Inbound PO Idoc

Hi experts,
i am working on Inbound PO Idoc scenario. I am testing Idoc in WE19 with ORDRSP mesage type.
Idoc type:ORDERS05
Process code:ORDR
FM:IDOC_INPUT_ORDRSP
while trying to create PO it is giving an error 'Purchasing document does not exist' in we05.
please suggest me how to resolve this???
Regards,
Bhuvan.

Hi,
first time i am testing this IDoc and i don't find any field in Idoc structure to provide purchase order value.
any more inputs plz??
regards,
bhuvan.

Company code does not exist or has not been fully maintained-very urgent

HI
while creating material master the teh error "compcode does not exist or has not been fully mainteined" giving.
i checked the global settings , they are correct.
I checked the plants assign also.
very urgent
Thanks
sasikanth.

hi
goto OMSY and assign periods to compnay code
check OB37 assign fiscal year variant
OB62 assign chart of accounts
i am sure check the above settings u r problem will be solved
prashanth

"The company code does not exist or has not been fully maintained" in mm01

Hi all,
I am creating a material, it needs me to provide company code. when I gave out my company code, it reports:
"The company code ZXXX does not exist or has not been fully maintained".
what should the problem be?
thanks and regards,
Smaosn Zhu

Hi Raja,
Checked all you specified.
I have done these assignments:
1. assign comp - > comp code
2. assign plant- > comp code
3. assign purch. org - > comp code
4. assign purch. org - > plant
but the problem is still there.
let me try to re-do it.
thanks,
samson

G/L Account does not exist error while invoicing

Hi ,
I am trying to invoice an account. While invoicing it is throwing the following error message G/L Account does not exist.
From where can I know which G/L account it is refering to? or which main/sub is not mainteined for this ADID.
Thanks in advance
Debashish

Hi There
Go to the sales document (order VA02) (Contract VA42). Click on the relevant item and go to > Environment > Analysis > Account determination. It shows 6 options, click on each one till you find the relevant account. Do this for all items on the Sales/contract if necessary.
This can be found in customizing under SPRO > Sales and Distrib > Basic Functions > Account assignment/costing > Revenue account determination, > Assign GL accounts. Your SD consultant can help you.
In VF02, release the billing doc and it will give you details as well.
Hope this helps
Kind regards
Dawn

Shopping cart Document does not exist error while PO creation

Hi Friends,
We are in SRM 5.0 Extended Classic and ECC6.0. I am experiening a issue while sourcing. After shopping cart is created and ends up in sourcing cockpit, I try to create PO, I get the error 'Shopping cart Document does not exist'. I verified Number ranges, org structure, and config settings but unable to find a solution.
This is at a critical stage where I am not able to create PO and hence process is not complete. I am not able to proceed further and need advise on how or where to look for possible issues. I did look at the other SDN postings but was not pertaining to mine.
Thanks
Rao

hI
Did you get below error message **** pit.
Data not found
Document does not exist
i believe the error message will not stop you to do sourcing.
select and assigned to work area and assign source of supply and create a Purchase order.
i also faced this error long back.
br
Muhtu

"An Exchange Rate Does not Exist" error while creating an item

Hi..
Pre-requisites: RMS is installed without base data
We are trying to create an item in RMS by filling the required information in "Item Maintenance window" and "Supplier details" screen. After this is done when we select the "Retail by Zone" link and the application prompts an error message : "An Exchange Rate Does not Exist", and all the values in "Retail by zone" screen are not populated. How do we ressolve this?
Thanks in Advance
Yamini

Also, make sure that if a currency has a rate entry for example, 01-jul-2010, then make sure that ALL other currencies have a rate entry for 01-jul-2010, even if the rate has not changed for other currencies - a little trick I learned from an Oracle consultant.
Alan

Index does not exist error while running the query

Hi Everone,
I am facing some problem when i try to tun the query in BEx. When i run the query, it is giving the error "Index does not exist". Please help me out.
With Regards
Pavan
Edited by: PavanRaj_S on Mar 3, 2010 4:50 AM

Hi,
If you facing index problem go to mange create the index and you want to know what are all the infocubes not maintained index go db02 you can find out.
Regards
sivaraju

'Stream requested does not exist' error while importing MPEG-2 file.

Hi.
I received the following error when attempting to import an MPEG-2 file as a Timeline:
'Stream requested does not exist'
What does this mean?
Thanks,
William Johnston

Let me introduce you to the SEARCH link
http://www.adobeforums.com/cgi-bin/webx?126@@.1de98ec0
Go there and enter
Stream requested does not exist
As well as this message thread, there are over a dozen other messages you may read
If you don't find a solution... come back here and post more information
Always provide DETAILED computer and software information, including all hardware and software brand/model and version numbers, with DETAILS about the input files you are using and any output files you wish to create, plus read
How to ask a GOOD Forum question with COMPLETE information
First message gives 5 specific suggestions (you may do #5 for FREE, depending on your problem and purchase date) and then tells how to ask a question in such a manner that you provide all the information that you WILL be asked, for anyone to be able to provide an answer
Second message has advice, and links, concerning optimizing a computer for video editing
Third message concerns things that USED to work, but now do not (and more questions to answer)
Also, for Premiere Pro, check the
Wiki FAQ

Queue does not exist Error while saving TO

We enabled RF Queue determination
Queues are getting determined correctly in Transfer orders as per the logic mentioned in 'Assign Areas and Activities to Queues'
We dont want queue determination for few TO's if logic is not there and ststem should not assign queue but now system is prompting message 'Queue does not exist, Message no. LRFMON502' if it could not derive queue while saving TO
Any pointers?

Hi
We enabled queue determination based on detination storage type with BADI LE_WM_RF_QUEUE, this implementation cuased us DUMP
Fixed by fine tuning queue assignment in config

Table or view does not exists error while executing select statement

Hi,
I am new to Oracle. I am getting a error while executing the select statement if i give table name without double quotes.
Ex: Select * from Customer;
But working fine when the table name is enclosed within a double quotes.
Ex: Select * from "Customer";
Is there any way to execute the select statement without the double quotes?
Actually I am using NHibernate objects for data access.
Thanks,
Sai

Actually I am using NHibernate objects for data access.And probably that's the problem:
SQL> select * from mytab;
         A
         1
SQL> select * from mYtAb;
         A
         1
SQL> select * from MYTAB;
         A
         1
SQL> select * from MYTAb;
         A
         1Oracle statements are case insensitive and doesn't require double quotes unless the object names are reserved words.
As wrote by others if table is created using double quotes it's name bacomes case-sensitive... and this could be the problem...
Max
[My Italian Oracle blog|http://oracleitalia.wordpress.com/2010/02/05/gestione-degli-errori-in-sql-con-log-errors/]
Edited by: Massimo Ruocchio on Feb 5, 2010 7:08 PM
Added last comment..

Company code does not exist error while sending idoc

Similar Messages

Maybe you are looking for