"Company code is not permitted as the paying company code while FRFT

Hi Experts,
I am trying to post cross company fund transfers via FRFT -> F111. In my scenario, CC1 is sending amount to CC2 via a virtual payment method. I have done basic company code set up and also customizations in FBZP for payment method and F8BJ/F8BF for incoming/outgoing transactions. I have also done OBYA setting for cross company clearing account
During FRFT payment request i get this error: "Company code CC1 is not permitted as the paying company code".
Did you ever experience this? If so, how can i fix this?
Thanks in advance.

Dear subumax
1.Please check once again in both company codes for FBZP. were you maintained in All Company codes in FBZP - Select your company code and check- were you maintained Paying company code.
2.Pleasecheck in under Paying Company codes - were you maintained the paying company code CC1 or not
3Please check in under Payment methods in comapny code were you maintained your paying company code code CC1 details or not
Regards
Shankar

Similar Messages

Posting is not possible for the specified company code.

Hi SRM Gurus,
We have a four company codes in our org.structure and if we try to post manual invoice for a particular company code with its currency, we are getting this error :
"Posting is not possible for the specified company code "
We have all company codes defined and inherited for the particular user in BUK and we get all the company codes in the F4 help of this user in BBPIV02 -->Basic data.
Any suggestions pl.
I doubt this particular Cocode is deactivated for invoice posting in backend. Is it possible ?
Kindly suggest.
Reg.,
Sridhar.

Hi
Which SRM version are you using ?
Are you getting this error for a praticular company code only or for all the comapny codes ?
<b>Please read this -></b>
Since you are trying to create Invoice with PO did you check the Vendor Root there is a attribute for company code. Please maintain the same, if not maintained.
Refer the link below for details.
Re: Company code for system missing in user attributes
<u>Other related links -></u>
Try to change the chart of acct info in OBY6 for a company code that was copied from SAP template, there is no Financial posting or any other posting in this company code.
Re: Posting Period Error in Confirmation
Hope this will help.
Regards
- Atul

Sender JMS Adapter error: The JMS provider gave the error message as Not permitted, and the error code is null

I am trying to connect tibcoems with PI using a Sender jms adapter.After successfully installing the drivers , the sender adapter goes into error.
"The JMS Provider gave the error message as Not permitted, and the error code is null"
The Transport protocol is 'Access JMS Provider with JNDI' and i have been given the required parameters from the tibco guys.
Your input are highly appreciated.
Shyam

Hi AQmit,
Thanks for the reply.
Please find the screenshots of what i am trying to do.
Also, Can u direct me how to check the right logs?

Add-on connection error (-105) Access to company database is not permitted

Good day,
One of our clients have upgraded to 8.8 PL 11 (from 2007A PL 41).
Somehow the SBO-Common became corrupt and SAP suggested that we reinstall the SBO-Common.
The problem is that now the add-on (developed by us) is not connecting.
The add-on connects to UI API and DI API, but when trying to connect to the company with SAPbobsCOM.Company, an error is returned (error code: -105).
I am also confused about what the error actually is, bacause according to the SDK Help file, error -105 is "The observer.dll init has failed.", but the error message returned by the add-on is "Access to company database is not permitted; log on to SAP Business One and sign end user license agreement (EULA)"
I have tried resigning the EULA, but no success.
I have also tried deleting the content of the %temp%\SM_OBS_DLL, as suggested in another post.
The version of the OBServer.dll is 8.80.229.0 - I believe that this is the correct version for 8.8 PL 11?
Please advise.
Kind regards,
Rikard

Good day all,
My apologies.
I have discovered what the problem was - and it was me.
I did not realise that the connection I was making was not to the same database that I was connected to.
Therefore, I had to log onto the other database and sign the EULA.
The error explained exactly what I needed to do, but I wasn't paying attention.
Regards,
Rikard

Customize Payment Advice according to the paying company

Hello Guys,
I was wondering whether it is possible to change the header of the payment advice to show the data of the paying company.
The standard method for the header is to contain data from a text module, defined in SO10.
So is it possible to make an automatic check in the form, or in customizing perhaps, that selects a different text module according to the paying company.
E.g.: paying company has company code A => text module TEXT_HEADER_A is selected,
paying company has company code B => text module TEXT_HEADER_B is selected, etc.
Am I missing something here? Any help is appreciated.
Best Regards,

Hello,
Thanks for the reply, but I probably wasn't very clear. We are using a custom Zform sapscript not a smartform. On the sapscript we would like to add some details about the paying company.
The conditioning is not really the problem, but where we can get the info about the paying company. I have found that tables REGUP and REGUH contain info that might be able to provide this.
It seems quite difficult however to print a payment advice, since it involves scheduling a payment run that contains some documents with expired due date. Perhaps anyone has similar experience with this?

Down pmnts with taxes are not permitted when processing with jur.code (Message no. FS206)

Hi Guys,
I am facing very critical issue on down Payment request, to process with saperate Tax Value.
We are supporting on Roll-out for Germany. We have implemented all standard SAP processes in the Project. We have also implemented many interfaces and one of the Interface is Sabrix Tax Engine (Tax Jurisdiction Code).
As per the Germany legal requirement, the Tax has to get calculated whenever the funds gets transfered from one Bank Account to Another Bank Account.
Coming to the issue: In the Customer Down Payment scenario, we are creating the Down payment request for Customer and as per Germany local requirement the Tax of 19% has to get calculated on Down payment.
For an Example: We have the Sales Order Contract Value of 100,000.00 EUR and we are creating the Down Payment reqeust of 10% which is 10000 EUR + Tax 19% 1900 EUR.
We are trying to post the Down Payment request in F-37 and we get the issue "Down pmnts with taxes are not permitted when processing with jur.code". This error is appearing due to Sabrix Tax engine (Tax Jurisdiction Code) has implemented in our System.
We have gone through the SAP notes 97288 and 213567 and understood that the Standard SAP does not support us to post the Down Payment request with Separate Tax Value, when the External Tax Engine has implemented.
I request you to suggest me, if you have already seen this issue in any of your Projects and fixed through the work-around solution. We have been working on work-around since 2 weeks, however no result.
Below is the error message:
Down pmnts with taxes are not permitted when processing with jur.code
Message no. FS206

HI Preeti,
Thanks for your response. We have already seen the similar SAP notes and the SAP notes explains that the "Down pmnts with taxes cannot be done along with with jur.code". The only solution is to post the DP without Tax.
However there might be some workaround which can be done in SAP, to process the Down Payment/Advance Payments with Tax Value along with Jurisdiction Code. I would like to know this.
Did any one seen this case in your experiece, if yes, what is the work-around solution?.
Need your help guys!,...
Regards,
Damodar Naidu

Error FS206 Down pmnts w/ taxes not permitted when processing with jur.code

Issue: I am encountering a problem entering Taxes when applying down payments received from customers since we are using a jurisdiction code taxation procedure. This process works as desired in Europe for our firm. I found OSS 97288 which is not valid for version ECC 6.0. Please assist due to US go-live in 2 weeks.Process: Create Down Payment Request for cash in advance. Required to tax at this point. Billing document creates a noted item in the G/L (Special G/L). I apply customer's payment via transaction F-29 and receive error "FS206 Down pmnts with taxes are not permitted when processing with jur.code."
Settings: 1) Alternative Recon account for Special GL posting has The tax category on the GL account = B "Output tax - down payments managed gross." 2) Transaction OBXB specifies tax clearing account for transaction key MVA. This G/Laccount has same tax category setting (B). My settings work perfectly for Europe since they are not taxed via juridicition codes.
Thank you in advance!

Check the GL master of the alternative recon account. Ideally there should be no setting in the tax fields as there is no tax calculated on down payment but only on the final amount. Leave the tax fiel blank and do not check mark posting without tax allowed.

Use of a debugger while executing Windows Digital Rights Management (WMDRM) code is not permitted

Hi:
   I have a Panasonic video camera that records in 1920x1080 60P format and writes an .m2ts type file. I've written a filter that scales this to half size and allows me to draw on the video etc. I would like to save that video.
When I attempt to develop my program using Visual Studio 2010 I get the message "Use of a debugger while executing Windows Digital Rights Management (WMDRM) code is not permitted". Also the program blows up with a memory access error.
Since this is my camera how is DRM involved??   Is there a way to make such private videos not be involved in DRM? Finally,  and how is one supposed to develop and debug this type of application if the debugger is not allowed
to be used.
     Interestingly, if I run my application in non-debug mode it executes correctly. However as I would like to make additions to the program etc. not being able to use the debugger is extremely difficult. Can someone
shed light on this??
   Mags

Hi:
   I have a Panasonic video camera that records in 1920x1080 60P format and writes an .m2ts type file. I've written a filter that scales this to half size and allows me to draw on the video etc. I would like to save that video.
When I attempt to develop my program using Visual Studio 2010 I get the message "Use of a debugger while executing Windows Digital Rights Management (WMDRM) code is not permitted". Also the program blows up with a memory access error.
Since this is my camera how is DRM involved??   Is there a way to make such private videos not be involved in DRM? Finally,  and how is one supposed to develop and debug this type of application if the debugger is not allowed
to be used.
     Interestingly, if I run my application in non-debug mode it executes correctly. However as I would like to make additions to the program etc. not being able to use the debugger is extremely difficult. Can someone
shed light on this??
   Mags

Tax code does not exist against the proceedure

Hi,
I have copies TAXINN proceedure and created new ZTAXIN, assigned to country IN. Created tax code through FTXP and maitained rate inFV11 against condition type JIPS. In OB40 GL assigned against the tax code. And also logistic general also assigned the tax code against company code. When i try to post FB60 with Tax code V1 system is throwing the error tax code V1 country IN tax proceedure ZTAXIN doest not exsist.
Can any one help me on this to solve the problem.
govind.

Dear:
It looks like that tax code (V1) is created as Output Tax instead of output tax .It means it is applicable only for SD and not for MM. For MM, tax codes should always be created as Input Tax.
If it does not solve your issue then also check customizing settings in
IMG u2013 logistic general u2013 tax on goods movement u2013 india u2013 basic setting u2013 determination of excise duty u2013 select tax calculation procedure.
Over here check out whether ZTAXIN has been assigned to IN or not.
Now go to IMG u2013 logistic general u2013 tax on goods movement u2013 India u2013 basic setting u2013 determination of excise duty u2013 condition based excise determination u2013 define tax code for purchasing document.
Regards

New company code configuaration is added for the existing company

Hi Guru's
New Company Code is to configure for the existing company. Already we 20 company codes.
Now Business users want new code for the country australia.
Please let me know what are the steps to configure the new company code.
I appreciate your help and coperation.
Regards
Jenny

Hi jenneyc,
1.1 Define and Assign Company Code
1.1.3 Assign Company Code to Controlling Area
1.1.4 Create new plant
1.1.5 Define and Assign Sales Organization
1.1.5.1 Copy Sales Organization
1.1.5.2 Change name and address of Sales Organization
1.1.5.3 Assign Sales Organization to Company Code
1.1.5.4 Assign Sales Organization ‑ Distribution Channel ‑ to Plant
1.1.6 Delete Purchasing Organization assignment to Company Code
1.1.7 Define Variants for Open Posting Periods
1.1.8 Open and Close Posting Periods
1.1.9 Assign Posting Period Variants to Company Code
1.1.10 Create Number Ranges for document posting for company code
1.1.11 Asset Accounting - Specify Number Assignment Across Company Codes
1.1.12 Creation of House Bank and Bank accounts
1.1.12.1 Define House Banks
1.1.12.2 Define Lockboxes for House Banks
1.1.12.3 Define Posting Data
1.1.12.4 Set Up Payment Methods per Company Code for Payment Transactions
1.1.12.5 Set Up Bank Determination for Payment Transactions
1.1.12.6 Create Check Lots
1.1.12.7 Create Program Variants for RFFOUS_C
Along with above we need to do LSMW for GL a/c company code data have to upload, and foreign currency Configuration require...!
I hope this info will helpful to you..!
Rds,
ANil

Access to account "iCloud" is not permitted. The server responded: "403" to operation CalDAVAccountRefreshQueueableOperation.

Hi there,
I am having a very infuriating problem with iCal. Every couple of seconds I get the message:
Access to account “iCloud” is not permitted.
The server responded:
“403”
to operation CalDAVAccountRefreshQueueableOperation.
It has made iCal completely unusable. I have tried unpicking various calendars, which makes no difference. Even with all the calendars disabled I keep getting the message.
I hope someone may be able to help me with this.

Alex,
Quit Calendar, turn off your internet connection, then paste this text ~/Library into the Finder Menu>Go>Go to Folder...window and select "Go." This will open the Users Library Folder.
Open the Calendars Folder which is in that Library Folder, and move any any files with "Cache" listed in the name field to your Desktop.
Next open the Preferences Folder in that same Library Folder and move the com.apple.iCal.plist file to the Desktop.
Log out/in or restart reconnect the internet and open Calendar.

I reset my iPhone 5s yesterday because my fingerprint bottom is not working. It says that failed every time I was trying to put my print... Now that I reset my phone the fingerprint pass code do not appear in the setting.

I reset my iPhone 5s yesterday because my fingerprint bottom is not working. It says that failed every time I was trying to put my print... Now that I reset my phone the fingerprint pass code do not appear in the setting.

Hi Emilemny,
Welcome to Apple Support Communities.
The TouchID settings will not be available until you create a passcode, see the article linked below for more information.
iPhone 5s: Using Touch ID
http://support.apple.com/kb/HT5883
You can set up Touch ID in iOS Setup Assistant or by tapping Settings > Touch ID & Passcode. To set up Touch ID, you must first set a passcode. Touch ID is designed to minimize the input of your passcode, but you need a passcode for additional security validation, such as enrolling new fingerprints.
-Jason

The server responded with an error. Access to "Don Weist/Winhall" in "Work" in account "iCloud" is not permitted. The server responded: "403" to operation CalDAVWriteEntityQueueableOperation.

"The server responded with an error.
Access to “Don Weist/Winhall” in “Work” in account “iCloud” is not permitted. The server responded: “403” to operation CalDAVWriteEntityQueueableOperation."
Does anyone know how to repair this problem. It just began happening today.
Thanks,
Ken

We previously had a similar issue when migrating multiple accounts from MobileMe to iCloud. The issue was resolved by disabling and then enabling iCal sync through iCloud on our iMacs in System Preferences.
Always backup your calendar before troubleshooting (File > Export > iCal Archive).
The following steps are roughly from a Apple Support Community discussion.
Open iCloud in System Preferences.
Switch off (uncheck) iCal sync in iCloud System Preferences pane.
Backup iCal before doing this. You will need to remove calendar data.
Open iCal and verify the iCloud account is removed in the iCal preferences under accounts.
Close iCal, reopen System Preference and switch on (check) iCal sync in iCloud System Preferences pane.
Reopen iCal and verify the iCloud account is enabled in the iCal preferences under accounts.
At this point if the problem persists you might try completely signing out of iCloud and then signing back in. But remember to backup all related data (iCal, Contacts, Mail, Photostream, etc) before turning off iCloud sync!

I can not open Calender. The server responded with an error. Access to account "virgin net" is not permitted. The server responded: "403" to operation CalDAVAAccountRefreshQueueableOperation.

I can not access Calender.
Keep getting blocked by message.
The server responded with error.
Access to account "virgin net" is not permitted.
The server responded:
"403"
to operation.
CalDAVAaccountRefreshQueueableOperation.

Please take each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes.
Step 1
In the Internet Accounts preference pane, delete any calendar accounts you don't use.
If there's no improvement, delete all calendar accounts and add them back. With an iCloud account, all you have to do is uncheck and recheck the box marked Calendars & Reminders in the iCloud preference pane.
Step 2
You may be trying to access an invited event that you declined, or one that was rescheduled after you accepted it. The error message should give you a clue as to what it is. If the calendar is on iCloud, you can bring up the Calendar on the website and select
Show Declined Events
from the popup menu with the gear icon in the upper right corner of the page. The declined events will appear in gray, and one of them should match what's shown the error message. [Credit for this solution to ASC member Psi.]
Step 3
If you get the error when trying to accept an invitation in an email attachment, it's because the organizer didn't properly create the event.
Step 4
Follow the instructions in this support article. Modify as necessary for a calendar that's not on iCloud.

TS3999 Received 2 appointments, same date, same content, just different hours. Since then I receive message from iCal: Access to "Subject" in account "iCloud" is not permitted. The server responded "403" to CalDAVWriteEntityQueueableOperation. It's a bug!

Received 2 appointments from a customer, same date, same content, just different hours. Since then I receive message from iCal: Access to “Subject” in account “iCloud” is not permitted. The server responded "403" to CalDAVWriteEntityQueueableOperation. In my opinion this is a bug, because iCloud is not able to handle 2 appointments at the same date with same content, just at different hours. The different hours should be enough individuality for each event on calendar.

In my opinion this is a bug, because iCloud is not able to handle 2 appointments at the same date with same content, just at different hours. The different hours should be enough individuality for each event on calendar.
Here are 4 identical events (other than time) in Calendar on my mac
Here is how they appear at iCloud.com
I concluded that iCloud has no problem with identical events seperated by time, so the question becomes what is wrong with your setup as opposed to what is wrong with iCloud.

"Company code is not permitted as the paying company code while FRFT

Similar Messages

Maybe you are looking for